inxi -Fxzd:
Code: Select all
System: Host: cali Kernel: 4.13.0-38-generic x86_64 (64 bit gcc: 5.4.0) Desktop: Xfce 4.12.3 (Gtk 2.24.28)
Distro: Linux Mint 18.3 Sylvia
Machine: System: LENOVO (portable) product: 80SM v: Lenovo ideapad 310-15ISK
Mobo: LENOVO model: Toronto 5A2 v: SDK0J40709 WIN Bios: LENOVO v: 0XCN42WW date: 04/21/2017
CPU: Dual core Intel Core i7-6500U (-HT-MCP-) cache: 4096 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 10368
clock speeds: max: 3100 MHz 1: 500 MHz 2: 500 MHz 3: 500 MHz 4: 500 MHz
Graphics: Card: Intel Sky Lake Integrated Graphics bus-ID: 00:02.0
Display Server: X.Org 1.18.4 drivers: intel (unloaded: fbdev,vesa) Resolution: 1920x1080@60.00hz
GLX Renderer: Mesa DRI Intel HD Graphics 520 (Skylake GT2)
GLX Version: 3.0 Mesa 17.2.8 Direct Rendering: Yes
Audio: Card Intel Sunrise Point-LP HD Audio driver: snd_hda_intel bus-ID: 00:1f.3
Sound: Advanced Linux Sound Architecture v: k4.13.0-38-generic
Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: 3000 bus-ID: 01:00.0
IF: enp1s0 state: down mac: <filter>
Card-2: Qualcomm Atheros Device 0042 driver: ath10k_pci bus-ID: 02:00.0
IF: wlp2s0 state: up speed: N/A duplex: N/A mac: <filter>
Card-3: Atheros usb-ID: 001-004
IF: null-if-id state: N/A speed: N/A duplex: N/A mac: N/A
Drives: HDD Total Size: 256.1GB (13.8% used) ID-1: /dev/sda model: SAMSUNG_MZYLN256 size: 256.1GB
Optical: /dev/sr0 model: HL-DT-ST DVDRAM GUE0N rev: T.02 dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 24x multisession: yes
audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: / size: 20G used: 9.3G (50%) fs: ext4 dev: /dev/sda3
ID-2: swap-1 size: 12.82GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 38.5C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 209 Uptime: 20:19 Memory: 1747.6/11915.7MB Init: systemd runlevel: 5 Gcc sys: 5.4.0
Client: Shell (bash 4.3.481) inxi: 2.2.35
Code: Select all
Devices
-----------------------
HL-DT-ST DVDRAM GUE0N T.02 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump] [%7]
System
-----------------------
K3b Version: 2.0.3
KDE Version: 4.14.16
QT Version: 4.8.7
Kernel: 4.13.0-38-generic
Used versions
-----------------------
cdrecord: 1.1.11
cdrecord
-----------------------
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.11
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identification : 'DVDRAM GUE0N '
Revision : 'T.02'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x0012 (DVD-RAM)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 262144 = 256 KB
FIFO size : 12582912 = 12288 KB
Speed set to 4234 KB/s
Track 01: data 379 MB
Total size: 435 MB (43:10.36) = 194277 sectors
Lout start: 436 MB (43:12/27) = 194277 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11634 (97:26/66)
ATIP start of lead out: 359846 (79:59/71)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 165569
Starting to write CD/DVD at speed 24.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 FF FF FF 6A 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 33.422s timeout 200s
Writing pregap for track 1 at -150
write track pad data: error after 0 bytes
BFree: 256 K BSize: 256 K
Starting new track at sector: 0
Track 01: 0 of 379 MB written.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.014s timeout 200s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
write track data: error after 0 bytes
Writing time: 38.491s
Average write speed 67.4x.
Fixating...
Fixating time: 1.450s
/usr/bin/wodim: fifo had 191 puts and 1 gets.
/usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=24 -sao driveropts=burnfree -data -tsize=194277s -
Code: Select all
hob@cali ~ $ wodim --devices
wodim: No such file or directory.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.
Code: Select all
hob@cali ~ $ dmesg | grep sr0
[ 1.652441] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.652597] sr 1:0:0:0: Attached scsi CD-ROM sr0
[12429.223504] VFS: busy inodes on changed media or resized disk sr0
Code: Select all
hob@cali ~ $ ls -lh /dev/ | grep sr0
lrwxrwxrwx 1 root root 3 Apr 19 11:42 cdrom -> sr0
lrwxrwxrwx 1 root root 3 Apr 19 11:42 cdrw -> sr0
lrwxrwxrwx 1 root root 3 Apr 19 11:42 dvd -> sr0
lrwxrwxrwx 1 root root 3 Apr 19 11:42 dvdrw -> sr0
brw-rw----+ 1 root cdrom 11, 0 Apr 19 11:42 sr0