Shutdowns Frequently increasing Can't dtermine hardware issue.

Questions about hardware,drivers and peripherals
Forum rules
Before you post please read how to get help
TimBob86
Level 1
Level 1
Posts: 19
Joined: Wed Jun 20, 2018 1:24 pm

Re: Shutdowns Frequently increasing Can't dtermine hardware issue.

Post by TimBob86 » Wed Jun 20, 2018 5:09 pm

Installed the drivers, rebooted now black screen. No bios even....

User avatar
ClixTrix
Level 5
Level 5
Posts: 782
Joined: Wed Dec 09, 2015 11:40 am
Location: Columbus, Ohio, USA

Re: Shutdowns Frequently increasing Can't dtermine hardware issue.

Post by ClixTrix » Wed Jun 20, 2018 5:34 pm

Well, I found info on your MB sensors.

https://www.linuxquestions.org/question ... 175607995/
Linux Mint 19 x64 Cinnamon 4.15.0-42-generic
Gigabyte GA-AB350M-D3H (F20) / Ryzen 5 1600 / Micron Ballistix Sport DDR4 2400 2x8GB / Sapphire Radeon HD6450
NVMe-SSD: Samsung 960 EVO 250GB / SATA-SSD: Samsung 850 250GB + Toshiba OCZ VX500 512GB

User avatar
ClixTrix
Level 5
Level 5
Posts: 782
Joined: Wed Dec 09, 2015 11:40 am
Location: Columbus, Ohio, USA

Re: Shutdowns Frequently increasing Can't dtermine hardware issue.

Post by ClixTrix » Wed Jun 20, 2018 5:37 pm

TimBob86 wrote:
Wed Jun 20, 2018 5:09 pm
Installed the drivers, rebooted now black screen. No bios even....
Dead?
Linux Mint 19 x64 Cinnamon 4.15.0-42-generic
Gigabyte GA-AB350M-D3H (F20) / Ryzen 5 1600 / Micron Ballistix Sport DDR4 2400 2x8GB / Sapphire Radeon HD6450
NVMe-SSD: Samsung 960 EVO 250GB / SATA-SSD: Samsung 850 250GB + Toshiba OCZ VX500 512GB

TimBob86
Level 1
Level 1
Posts: 19
Joined: Wed Jun 20, 2018 1:24 pm

Re: Shutdowns Frequently increasing Can't dtermine hardware issue.

Post by TimBob86 » Wed Jun 20, 2018 6:10 pm

Reseated Gpu it had dust in it. It is running now.

User avatar
ClixTrix
Level 5
Level 5
Posts: 782
Joined: Wed Dec 09, 2015 11:40 am
Location: Columbus, Ohio, USA

Re: Shutdowns Frequently increasing Can't dtermine hardware issue.

Post by ClixTrix » Fri Jun 22, 2018 7:48 am

Did reseating the video card solve the problem?

Also, the last link I posted gave some tips on getting the sensors working.
Linux Mint 19 x64 Cinnamon 4.15.0-42-generic
Gigabyte GA-AB350M-D3H (F20) / Ryzen 5 1600 / Micron Ballistix Sport DDR4 2400 2x8GB / Sapphire Radeon HD6450
NVMe-SSD: Samsung 960 EVO 250GB / SATA-SSD: Samsung 850 250GB + Toshiba OCZ VX500 512GB

TimBob86
Level 1
Level 1
Posts: 19
Joined: Wed Jun 20, 2018 1:24 pm

Re: Shutdowns Frequently increasing Can't dtermine hardware issue.

Post by TimBob86 » Sat Jul 07, 2018 1:25 pm

It appears that the issue may have been caused by the generic windows drivers for a mouse and keyboard. I have switched to wired mouse and keyboard and the system seems stable. I will continue to test for a few days. I will post again when this has been verified.

TimBob86
Level 1
Level 1
Posts: 19
Joined: Wed Jun 20, 2018 1:24 pm

Re: Shutdowns Frequently increasing Can't dtermine hardware issue.

Post by TimBob86 » Sat Jul 07, 2018 1:28 pm

If anyone is using two systems and Linux runs stable but windows does not check your event log. Error 41 may appear. This error may be related to usb devices and drivers.

TimBob86
Level 1
Level 1
Posts: 19
Joined: Wed Jun 20, 2018 1:24 pm

Re: Shutdowns Frequently increasing Can't dtermine hardware issue.

Post by TimBob86 » Sun Jul 08, 2018 10:20 pm

Three days of testing without the logitech mouse and keyboard has confirmed the above. Linux ran stable because of the drivers it used. Generic windows drivers caused the issue on that system. My own foolish mistake. I installed every appropriate drivers except for the mouse and keyboard. Once again highlighting the stability of linux systems vs windows.

Post Reply

Return to “Hardware Support”