Logitex Bluetooth mouse M590 loose connection / does not reconnect

Questions about hardware, drivers and peripherals
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Locked
kh4711

Logitex Bluetooth mouse M590 loose connection / does not reconnect

Post by kh4711 »

Hello all,

since the Kernel update to: 4.15.0-33-generic x86_64 bits: 64 gcc: 7.3.0 my Logitech mouse M590 does connect with bluetooth. The mouse or the wheel reacts with a small delay. But after a while it does not work any longer. With a reboot it is the same. Up to Kernel 4.15.0-32 everything worked perfect.

Any ideas about this failure?
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 1 time in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
kh4711

Re: Logitex Bluetooth mouse M590 loose connection / does not reconnect

Post by kh4711 »

Does anyone know a solution?


The Bluetooth connection does work only partial . After a reboot it stopps working if a Firefox od Vivaldi is used. I have found some new infos about this failure:

Protocol Important:
08:02:45 kernel: usb 1-1.1: Failed to suspend device, error -110
08:02:34 kernel: Bluetooth: hci0: command 0x0c1a tx timeout
08:02:28 bluetoothd: Failed to set mode: Failed (0x03)
08:02:26 kernel: Bluetooth: hci0: command 0x200b tx timeout
08:02:26 bluetoothd: Failed to set mode: Failed (0x03)
08:02:24 kernel: Bluetooth: hci0: command 0x2005 tx timeout
07:51:38 kernel: usb 1-1.1: Failed to suspend device, error -110
07:51:27 kernel: Bluetooth: hci0: command 0x0c1a tx timeout
07:51:23 kernel: usb 1-1.1: Failed to suspend device, error -110
07:51:23 kernel: Bluetooth: hci0: command 0x0c3a tx timeout
07:51:19 bluetoothd: Failed to set mode: Failed (0x03)
07:51:17 kernel: Bluetooth: hci0: command 0x200c tx timeout
07:51:17 bluetoothd: Failed to set mode: Failed (0x03)
07:51:15 kernel: Bluetooth: hci0: command 0x200b tx timeout
07:51:15 bluetoothd: Failed to set mode: Failed (0x03)
07:51:13 kernel: Bluetooth: hci0: command 0x2005 tx timeout
07:51:01 kernel: usb 1-1.1: Failed to suspend device, error -110
07:50:27 kernel: Bluetooth: hci0: corrupted ACL packet
07:42:47 bluetoothd: bt_uhid_send: Invalid argument (22)
07:40:53 kernel: usb 1-1.1: device not accepting address 9, error -32
07:37:09 kernel: Bluetooth: hci0: corrupted ACL packet
06:42:50 kernel: PKCS#7 signature not signed with a trusted key
06:42:50 kernel: usb 1-1.1: device descriptor read/64, error -110
06:42:50 kernel: PKCS#7 signature not signed with a trusted key
06:42:46 pulseaudio: [pulseaudio] backend-ofono.c: Failed to register as a handsfree audio agent with ofono: org.freedesktop.DBus.Error.ServiceUnknown: The name org.ofono was not provided by any .service files
06:42:45 systemd: Failed to start Turboprint Monitor Daemon.
06:42:44 kernel: TP-Daemon already installed...quitting
06:42:44 systemd: Failed to start Turboprint Monitor Daemon.
06:42:44 tprintdaemon: TP-Daemon already installed...quitting
06:42:44 systemd: Failed to start Turboprint Monitor Daemon.
06:42:44 tprintdaemon: TP-Daemon already installed...quitting
06:42:44 systemd: Failed to start Turboprint Monitor Daemon.
06:42:44 tprintdaemon: TP-Daemon already installed...quitting
06:42:44 wpa_supplicant: dbus: Failed to construct signal
06:42:43 systemd: Failed to start Turboprint Monitor Daemon.
06:42:42 kernel: ACPI Error: Method parse/execution failed \_PR.CPU0._PDC, AE_AML_OPERAND_TYPE (20170831/psparse-550)


Failure Protocol:

08:23:39 kernel: audit: type=1400 audit(1536819819.502:33): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_f48786ce3a9a748a9ce5415c7f2dce1" pid=17126 comm="oosplash" requested_mask="w" denied_mask="w" fsuid=1000 ouid=1000
08:02:45 kernel: usb 1-1.1: Failed to suspend device, error -110
08:02:34 kernel: Bluetooth: hci0: command 0x0c1a tx timeout
07:51:38 kernel: usb 1-1.1: Failed to suspend device, error -110
07:51:27 kernel: Bluetooth: hci0: command 0x0c1a tx timeout
07:51:23 kernel: usb 1-1.1: Failed to suspend device, error -110
07:51:23 kernel: Bluetooth: hci0: command 0x0c3a tx timeout
07:51:01 kernel: usb 1-1.1: Failed to suspend device, error -110
07:50:27 kernel: Bluetooth: hci0: corrupted ACL packet
07:42:47 kernel: hid-generic 0005:046D:B01B.0007: input,hidraw3: BLUETOOTH HID v0.06 Keyboard [M585/M590] on 24:0A:64:32:47:C8
07:42:47 kernel: input: M585/M590 as /devices/virtual/misc/uhid/0005:046D:B01B.0007/input/input24
07:40:53 kernel: usb 1-1.1: SerialNumber: Alaska Day 2006
07:37:09 kernel: Bluetooth: hci0: corrupted ACL packet
07:32:20 kernel: audit: type=1400 audit(1536816740.545:28): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/karl/.thunderbird/tnoxaz6t.default/key3.db" pid=9329 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
07:32:20 kernel: kauditd_printk_skb: 13 callbacks suppressed
07:32:05 kernel: hid-generic 0003:03EB:8810.0006: hiddev1,hidraw2: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:1a.0-1.3/input1
07:32:05 kernel: hid-multitouch 0003:03EB:8810.0005: input,hiddev0,hidraw1: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:1a.0-1.3/input0
07:32:05 kernel: input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:03EB:8810.0005/input/input22
07:32:05 kernel: usb 1-1.3: Manufacturer: Atmel
06:42:51 kernel: hid-generic 0005:046D:B01B.0004: input,hidraw3: BLUETOOTH HID v0.06 Keyboard [M585/M590] on 24:0A:64:32:47:C8
06:42:51 kernel: input: M585/M590 as /devices/virtual/misc/uhid/0005:046D:B01B.0004/input/input21
06:42:50 kernel: NET: Registered protocol family 38
06:42:50 kernel: Bluetooth: RFCOMM ver 1.11
06:42:50 kernel: usb 1-1.1: SerialNumber: Alaska Day 2006
06:42:50 kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
06:42:50 kernel: vboxpci: IOMMU not found (not registered)
06:42:50 kernel: VBoxPciLinuxInit
06:42:50 kernel: PKCS#7 signature not signed with a trusted key
06:42:50 kernel: usb 1-1.1: device descriptor read/64, error -110
06:42:50 kernel: VBoxNetAdp: Successfully started.
06:42:50 kernel: PKCS#7 signature not signed with a trusted key
06:42:50 kernel: VBoxNetFlt: Successfully started.
06:42:50 kernel: PKCS#7 signature not signed with a trusted key
06:42:50 kernel: vboxdrv: Successfully loaded version 5.2.10_Ubuntu (interface 0x00290001)
06:42:50 kernel: PKCS#7 signature not signed with a trusted key
06:42:46 kernel: Bluetooth: BNEP socket layer initialized
06:42:45 kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
06:42:45 kernel: ath: regdomain 0x8114 dynamically updated by country IE
06:42:45 kernel: wlp2s0: associated
06:42:44 kernel: usb 1-1.1: new full-speed USB device number 6 using ehci-pci
06:42:44 kernel: usbcore: registered new interface driver ath3k
06:42:44 kernel: USB Video Class driver (1.1.1)
06:42:44 kernel: usbcore: registered new interface driver uvcvideo
06:42:44 kernel: input: USB2.0 UVC HD Webcam: USB2.0 UV as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input20
06:42:44 kernel: uvcvideo 1-1.2:1.0: Entity type for entity Camera 1 was not initialized!
06:42:44 kernel: uvcvideo: Found UVC 1.00 device USB2.0 UVC HD Webcam (13d3:5195)
06:42:44 kernel: usbcore: registered new interface driver btusb
06:42:44 kernel: Linux video capture interface: v2.00
06:42:44 kernel: Bluetooth: SCO socket layer initialized
06:42:44 kernel: NET: Registered protocol family 31
06:42:44 kernel: Bluetooth: Core ver 2.22
kh4711

Re: Logitex Bluetooth mouse M590 loose connection / does not reconnect

Post by kh4711 »

Hi

I have found a solution for using Logitech mouse M590. :D

Don't use Bluetooth, but use the attached unifying receiver of this Logitech mouse.

Connect the unifying receiver into USB Port and install driver Solaar.

Everything works perfect with this software.

Thank you to the developer of Solaar, Daniel Pavel
http://github.com/pwr
Locked

Return to “Hardware Support”