Odroid H2 Compatibility

[stephanieswitzer]

I'm a big fan of Single Board Computers. Odroid is producing the H2 SBC based around an Intel Celeron cpu and I was wondering if Mint would install and run on this board. The specs are:

KEY FEATURES

SoC – Intel Celeron J4105 quad core processor @ up to 2.3 GHz (real frequency) with 12EU Intel UHD Graphics 600
System Memory – Dual-channel Memory DDR4-PC19200 (2400MT/s) supporting up to 32GB RAM in total
Storage – M.2 PCIe 2.0 x4 slot for one NVMe storage, 2x SATA 3.0 ports, eMMC flash support
Video Output
HDMI 2.0 up to 4K (4096×2160) @ 60 Hz
DisplayPort 1.2 up to 4K (4096×2160) @ 60 Hz
Audio – HDMI, audio jacks for HP, MIC. and S/PDIF
Connectivity – Dual Gigabit Ethernet (RJ45)
Expansion – 20-pin header with I2C and UART (3.3V)
Misc – RTC battery (Not Included)
Power Supply – 14V to 20V DC power input
Dimensions – 110x110x43mm
Weight – About 320 grams with heatsink, two DRAM modules, and M.2 NVMe SSD.

REQUIRED ITEMS (NOT INCLUDED)

No power supply included - 15VDC/4A power supply required
No RAM pre-installed - DDR4 SODIMM
DDR3 is not supported
No eMMC Module or SSD included
M.2 SATA SSD is not supported
No case included
No HDMI cable included - needed to connect to a display device. Recommend HDMI2.0 cable to support 4K output