USB Mouse - not working after unplug-plug to ports

Questions about hardware,drivers and peripherals
Forum rules
Before you post please read how to get help
Post Reply
pingvinche2
Level 1
Level 1
Posts: 6
Joined: Mon Aug 19, 2019 10:38 am
Location: Novi Sad

USB Mouse - not working after unplug-plug to ports

Post by pingvinche2 » Sat Aug 24, 2019 8:45 am

A couple a weeks ago I did fresh install of Linux Mint 19.2 Cinnamon and all hardware (except bluetooth adapter) is recognized.
Previously I have LM 17.2 Cinnamon and it worked fine on same machine, after some tuning as usual for Linux. Bluetooth didn't worked on that version too.
Machine - old Dell Inspiron laptop (N5010).

USB mouse I have (Trust Gxt 108) is regularly recognized and works on machine boot up.

My problem is that USB mouse does not work after I unplug it from port and then do insert, to same or any other USB port.
Machine have 4 USB ports.
Most of time it helps if I do Logout and then LogIn. Sometimes machine need total reboot/restart.

I noticed that after inserting mouse, it instantly get recognized in USB list and it flashes (diode is active) but arrow on screen doesn't move.
Command lsusb in Terminal gives next output:

Code: Select all

$ lsusb
Bus 002 Device 005: ID 413c:8162 Dell Computer Corp. Integrated Touchpad [Synaptics]
Bus 002 Device 004: ID 413c:8161 Dell Computer Corp. Integrated Keyboard
Bus 002 Device 003: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
[b]Bus 002 Device 007: ID 1bcf:0005 Sunplus Innovation Technology Inc. Optical Mouse
[/b]Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0c45:6480 Microdia Sonix 1.3 MP Laptop Integrated Webcam
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Any suggestions?
LM 19.2 Cinnamon, Dell Inspiron N5010

pingvinche2
Level 1
Level 1
Posts: 6
Joined: Mon Aug 19, 2019 10:38 am
Location: Novi Sad

Re: USB Mouse - not working after unplug-plug to ports

Post by pingvinche2 » Mon Aug 26, 2019 11:16 am

Since no one reply, I have to add some more clues.

Not just USB mouse problem but also USB memory problem.
My Transcend 32GB JetFlash 790 USB 3.0 flashes instantly after inserting it. But not shown in Nemo file browser.

In Terminal, dmesg returns -> https://pastebin.com/ebuh4Q4F

(here pasting just end of list, because of character limitations of forum)

Code: Select all

$ dmesg
...
[13940.365643] usb 2-1.2: new high-speed USB device number 7 using ehci-pci
[13940.487211] usb 2-1.2: New USB device found, idVendor=8564, idProduct=1000
[13940.487215] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[13940.487217] usb 2-1.2: Product: Mass Storage Device
[13940.487218] usb 2-1.2: Manufacturer: JetFlash
[13940.487220] usb 2-1.2: SerialNumber: 144AB9399HL6MMTR
...
then after some time, unplug and re-plug to different USB port

Code: Select all

~$ dmesg

[15545.418307] usb-storage 2-1.2:1.0: USB Mass Storage device detected
[15545.418453] scsi host6: usb-storage 2-1.2:1.0
[15545.418586] usbcore: registered new interface driver usb-storage
[15545.438287] usbcore: registered new interface driver uas
[15546.810940] scsi 6:0:0:0: Direct-Access     JetFlash Transcend 32GB   1100 PQ: 0 ANSI: 6
[15546.811408] sd 6:0:0:0: Attached scsi generic sg2 type 0
[15546.812612] sd 6:0:0:0: [sdb] 61702144 512-byte logical blocks: (31.6 GB/29.4 GiB)
[15546.813417] sd 6:0:0:0: [sdb] Write Protect is off
[15546.813421] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
[15546.814265] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[15546.821150]  sdb: sdb1
[15546.824449] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[16700.844759] usb 2-1.2: USB disconnect, device number 7
[16700.845895] sd 6:0:0:0: [sdb] Synchronizing SCSI cache
[16700.845950] sd 6:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[16709.001161] usb 2-1.1: new high-speed USB device number 8 using ehci-pci
[16709.114865] usb 2-1.1: New USB device found, idVendor=8564, idProduct=1000
[16709.114870] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[16709.114872] usb 2-1.1: Product: Mass Storage Device
[16709.114874] usb 2-1.1: Manufacturer: JetFlash
[16709.114876] usb 2-1.1: SerialNumber: 144AB9399HL6MMTR
[16709.115957] usb-storage 2-1.1:1.0: USB Mass Storage device detected
[16709.117516] scsi host6: usb-storage 2-1.1:1.0
[16710.514841] scsi 6:0:0:0: Direct-Access     JetFlash Transcend 32GB   1100 PQ: 0 ANSI: 6
[16710.515253] sd 6:0:0:0: Attached scsi generic sg2 type 0
[16710.516258] sd 6:0:0:0: [sdb] 61702144 512-byte logical blocks: (31.6 GB/29.4 GiB)
[16710.517125] sd 6:0:0:0: [sdb] Write Protect is off
[16710.517129] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
[16710.517881] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[16710.523999]  sdb: sdb1
[16710.527386] sd 6:0:0:0: [sdb] Attached SCSI removable disk
LM 19.2 Cinnamon, Dell Inspiron N5010

Post Reply

Return to “Hardware Support”