*ACPI* Ryzen Vega freeze under load with amdgpu-pro: Acer laptop

[N7_X]

Hello all,
I have an Acer Predator Helios 500 - Ryzen edition (PH517-61) with a few mildly irritating issues. MrEen was fantastic with guiding me to resolve the sound issue present on this model viewtopic.php?f=49&t=312318 and we found out that the deciding factor appeared to be something to do with power. Long story short, I have audio working, credit to MrEen.

Now I'd like to resolve the graphics/power issue going on as well:
Using the open source drivers has no crashing, but the performance is significantly less than it should be. Using amdgpu-pro has the performance where it should be, but everything freezes up until the computer is force rebooted.

I am quickly and easily able to reproduce this by running a Unigine benchmark (Valley.)
The lockup routinely happens within a short time span.

inxi -Fxxxrz

Code: Select all

System:
  Host: Empyrrean Kernel: 5.3.0-46-generic x86_64 bits: 64 compiler: gcc 
  v: 7.5.0 Desktop: Cinnamon 4.4.8 wm: muffin 4.4.2 dm: LightDM 1.26.0 
  Distro: Linux Mint 19.3 Tricia base: Ubuntu 18.04 bionic 
Machine:
  Type: Laptop System: Acer product: Predator PH517-61 v: V1.08 
  serial: <filter> 
  Mobo: PRS model: Cayman_PRS v: V1.08 serial: <filter> UEFI: Insyde v: 1.08 
  date: 04/19/2019 
Battery:
  ID-1: BAT1 charge: 63.1 Wh condition: 63.1/74.1 Wh (85%) volts: 17.0/15.4 
  model: PANASONIC AP17C5P type: Li-ion serial: <filter> status: Full 
CPU:
  Topology: 8-Core model: AMD Ryzen 7 2700 bits: 64 type: MT MCP arch: Zen+ 
  rev: 2 L2 cache: 4096 KiB 
  flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm 
  bogomips: 102207 
  Speed: 1427 MHz min/max: 1550/3200 MHz boost: enabled Core speeds (MHz): 
  1: 1378 2: 1446 3: 1397 4: 1382 5: 1533 6: 1542 7: 1547 8: 1546 9: 1547 
  10: 1547 11: 1375 12: 1376 13: 1546 14: 1546 15: 1498 16: 1542 
Graphics:
  Device-1: AMD Vega 10 XT [Radeon RX Vega 64] vendor: Acer Incorporated ALI 
  driver: amdgpu v: 5.4.7.20.10 bus ID: 08:00.0 chip ID: 1002:687f 
  Display: x11 server: X.Org 1.20.5 driver: amdgpu,ati 
  unloaded: fbdev,modesetting,vesa resolution: 1920x1080~144Hz 
  OpenGL: renderer: 687F v: 4.6.13594 Core Profile Context 20.10 
  compat-v: 4.6.13594 direct render: Yes 
Audio:
  Device-1: AMD vendor: Acer Incorporated ALI driver: snd_hda_intel 
  v: kernel bus ID: 08:00.1 chip ID: 1002:aaf8 
  Device-2: AMD Family 17h HD Audio vendor: Acer Incorporated ALI 
  driver: snd_hda_intel v: kernel bus ID: 0a:00.3 chip ID: 1022:1457 
  Sound Server: ALSA v: k5.3.0-46-generic 
Network:
  Device-1: Qualcomm Atheros Killer E2500 Gigabit Ethernet 
  vendor: Acer Incorporated ALI driver: alx v: kernel port: 3000 
  bus ID: 04:00.0 chip ID: 1969:e0b1 
  IF: enp4s0 state: down mac: <filter> 
  Device-2: Intel Wireless-AC 9260 vendor: Bigfoot Networks driver: iwlwifi 
  v: kernel port: 3000 bus ID: 05:00.0 chip ID: 8086:2526 
  IF: wlp5s0 state: up mac: <filter> 
Drives:
  Local Storage: total: 853.29 GiB used: 126.14 GiB (14.8%) 
  ID-1: /dev/nvme0n1 vendor: SK Hynix model: HFS256GD9MNE-6200A 
  size: 238.47 GiB speed: 31.6 Gb/s lanes: 4 serial: <filter> rev: 40000E00 
  scheme: GPT 
  ID-2: /dev/sda vendor: Western Digital model: WD1600BEVT-75ZCT2 
  size: 149.05 GiB speed: 3.0 Gb/s rotation: 5400 rpm serial: <filter> 
  rev: 1A11 scheme: GPT 
  ID-3: /dev/sdb vendor: Crucial model: CT500MX500SSD4 size: 465.76 GiB 
  speed: 6.0 Gb/s serial: <filter> rev: 023 scheme: GPT 
Partition:
  ID-1: / size: 233.24 GiB used: 18.56 GiB (8.0%) fs: ext4 
  dev: /dev/nvme0n1p2 
  ID-2: /home size: 457.45 GiB used: 107.58 GiB (23.5%) fs: ext4 
  dev: /dev/sdb1 
Sensors:
  System Temperatures: cpu: 53.6 C mobo: N/A 
Use of uninitialized value $val2 in string eq at /usr/bin/inxi line 5759.
Use of uninitialized value $val2 in split at /usr/bin/inxi line 5764.
Use of uninitialized value $val2 in concatenation (.) or string at /usr/bin/inxi line 5766.
Use of uninitialized value $val2 in concatenation (.) or string at /usr/bin/inxi line 5767.
Use of uninitialized value $val2 in concatenation (.) or string at /usr/bin/inxi line 5768.
  Fan Speeds (RPM): N/A gpu: fan: 0 
Repos:
  No active apt repos in: /etc/apt/sources.list 
  Active apt repos in: /etc/apt/sources.list.d/additional-repositories.list 
  1: deb https://dl.winehq.org/wine-builds/ubuntu/ bionic main
  Active apt repos in: /etc/apt/sources.list.d/amdgpu-pro-local.list 
  1: deb [ trusted=yes ] file:/var/opt/amdgpu-pro-local/ ./
  Active apt repos in: /etc/apt/sources.list.d/cybermax-dexter-sdl2-backport-bionic.list 
  1: deb http://ppa.launchpad.net/cybermax-dexter/sdl2-backport/ubuntu bionic main
  Active apt repos in: /etc/apt/sources.list.d/home:e9925248:grandorgue.list 
  1: deb http://download.opensuse.org/repositories/home:/e9925248:/grandorgue/xUbuntu_18.04/ /
  Active apt repos in: /etc/apt/sources.list.d/js-reynaud-kicad-5_1-bionic.list 
  1: deb http://ppa.launchpad.net/js-reynaud/kicad-5.1/ubuntu bionic main
  Active apt repos in: /etc/apt/sources.list.d/lunarg-vulkan-bionic.list 
  1: deb https://packages.lunarg.com/vulkan bionic main
  2: deb-src https://packages.lunarg.com/vulkan bionic main
  Active apt repos in: /etc/apt/sources.list.d/mscore-ubuntu-mscore3-stable-bionic.list 
  1: deb http://ppa.launchpad.net/mscore-ubuntu/mscore3-stable/ubuntu bionic main
  Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list 
  1: deb http://mirrors.advancedhosters.com/linuxmint/packages tricia main upstream import backport
  2: deb http://mirror.metrocast.net/ubuntu bionic main restricted universe multiverse
  3: deb http://mirror.metrocast.net/ubuntu bionic-updates main restricted universe multiverse
  4: deb http://mirror.metrocast.net/ubuntu bionic-backports main restricted universe multiverse
  5: deb http://security.ubuntu.com/ubuntu/ bionic-security main restricted universe multiverse
  6: deb http://archive.canonical.com/ubuntu/ bionic partner
  Active apt repos in: /etc/apt/sources.list.d/oibaf-graphics-drivers-bionic.list 
  1: deb http://ppa.launchpad.net/oibaf/graphics-drivers/ubuntu bionic main
  Active apt repos in: /etc/apt/sources.list.d/vipergui.list 
  1: deb https://thepbone.github.io/Viper4Linux-GUI-PPA ./
Info:
  Processes: 379 Uptime: 4m Memory: 19.52 GiB used: 1.43 GiB (7.3%) 
  Init: systemd v: 237 runlevel: 5 Compilers: gcc: 7.5.0 alt: 7 Shell: bash 
  v: 4.4.20 running in: gnome-terminal inxi: 3.0.32

journalctl | grep amdgpu

Code: Select all

Apr 14 10:51:51 Empyrrean kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-46-generic root=UUID=88249bd2-c093-46f5-9603-ba2f9eb90fb8 ro amdgpu.ppfeaturemask=0xffff7fff
Apr 14 10:51:51 Empyrrean kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-46-generic root=UUID=88249bd2-c093-46f5-9603-ba2f9eb90fb8 ro amdgpu.ppfeaturemask=0xffff7fff
Apr 14 10:51:51 Empyrrean kernel: [drm] amdgpu kernel modesetting enabled.
Apr 14 10:51:51 Empyrrean kernel: amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff
Apr 14 10:51:51 Empyrrean kernel: amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0000000 -> 0xf01fffff
Apr 14 10:51:51 Empyrrean kernel: amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 5: 0xf0600000 -> 0xf067ffff
Apr 14 10:51:51 Empyrrean kernel: fb0: switching to amdgpudrmfb from EFI VGA
Apr 14 10:51:51 Empyrrean kernel: amdgpu 0000:08:00.0: vgaarb: deactivate vga console
Apr 14 10:51:51 Empyrrean kernel: amdgpu 0000:08:00.0: enabling device (0006 -> 0007)
Apr 14 10:51:51 Empyrrean kernel: amdgpu 0000:08:00.0: VRAM: 8176M 0x000000F400000000 - 0x000000F5FEFFFFFF (8176M used)
Apr 14 10:51:51 Empyrrean kernel: amdgpu 0000:08:00.0: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
Apr 14 10:51:51 Empyrrean kernel: amdgpu 0000:08:00.0: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
Apr 14 10:51:51 Empyrrean kernel: [drm] amdgpu: 8176M of VRAM memory ready
Apr 14 10:51:51 Empyrrean kernel: [drm] amdgpu: 8176M of GTT memory ready.
Apr 14 10:51:51 Empyrrean kernel: amdgpu: [powerplay] hwmgr_sw_init smu backed is vega10_smu
Apr 14 10:51:51 Empyrrean kernel: fbcon: amdgpudrmfb (fb0) is primary device
Apr 14 10:51:51 Empyrrean kernel: amdgpu 0000:08:00.0: fb0: amdgpudrmfb frame buffer device
Apr 14 10:51:51 Empyrrean kernel: amdgpu 0000:08:00.0: ring gfx uses VM inv eng 0 on hub 0
Apr 14 10:51:51 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.0.0 uses VM inv eng 1 on hub 0
Apr 14 10:51:51 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.1.0 uses VM inv eng 4 on hub 0
Apr 14 10:51:51 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.2.0 uses VM inv eng 5 on hub 0
Apr 14 10:51:51 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.3.0 uses VM inv eng 6 on hub 0
Apr 14 10:51:51 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.0.1 uses VM inv eng 7 on hub 0
Apr 14 10:51:51 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.1.1 uses VM inv eng 8 on hub 0
Apr 14 10:51:51 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.2.1 uses VM inv eng 9 on hub 0
Apr 14 10:51:51 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.3.1 uses VM inv eng 10 on hub 0
Apr 14 10:51:51 Empyrrean kernel: amdgpu 0000:08:00.0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
Apr 14 10:51:51 Empyrrean kernel: amdgpu 0000:08:00.0: ring sdma0 uses VM inv eng 0 on hub 1
Apr 14 10:51:51 Empyrrean kernel: amdgpu 0000:08:00.0: ring sdma1 uses VM inv eng 1 on hub 1
Apr 14 10:51:51 Empyrrean kernel: amdgpu 0000:08:00.0: ring uvd_0 uses VM inv eng 4 on hub 1
Apr 14 10:51:51 Empyrrean kernel: amdgpu 0000:08:00.0: ring uvd_enc_0.0 uses VM inv eng 5 on hub 1
Apr 14 10:51:51 Empyrrean kernel: amdgpu 0000:08:00.0: ring uvd_enc_0.1 uses VM inv eng 6 on hub 1
Apr 14 10:51:51 Empyrrean kernel: amdgpu 0000:08:00.0: ring vce0 uses VM inv eng 7 on hub 1
Apr 14 10:51:51 Empyrrean kernel: amdgpu 0000:08:00.0: ring vce1 uses VM inv eng 8 on hub 1
Apr 14 10:51:51 Empyrrean kernel: amdgpu 0000:08:00.0: ring vce2 uses VM inv eng 9 on hub 1
Apr 14 10:51:51 Empyrrean kernel: [drm] Initialized amdgpu 3.33.0 20150101 for 0000:08:00.0 on minor 0
Apr 14 10:51:53 Empyrrean systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:amdgpu_bl0...
Apr 14 10:51:53 Empyrrean systemd[1]: Started Load/Save Screen Backlight Brightness of backlight:amdgpu_bl0.
Apr 14 10:51:56 Empyrrean sensors[1196]: amdgpu-pci-0800
Apr 14 12:48:18 Empyrrean kernel: Modules linked in: rfcomm ccm cmac bridge stp llc bnep btusb btrtl uvcvideo btbcm btintel videobuf2_vmalloc videobuf2_memops bluetooth videobuf2_v4l2 videobuf2_common ecdh_generic ecc videodev mc snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio edac_mce_amd snd_hda_codec_hdmi kvm_amd snd_hda_intel snd_intel_nhlt kvm snd_hda_codec irqbypass snd_hda_core nls_iso8859_1 snd_hwdep snd_pcm crct10dif_pclmul crc32_pclmul joydev snd_seq_midi snd_seq_midi_event iwlmvm ghash_clmulni_intel snd_rawmidi mac80211 snd_seq libarc4 snd_seq_device aesni_intel snd_timer aes_x86_64 crypto_simd acer_wmi cryptd iwlwifi sparse_keymap hid_multitouch glue_helper input_leds snd serio_raw wmi_bmof k10temp ccp cfg80211 soundcore ucsi_acpi typec_ucsi typec acer_wireless mac_hid sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 btrfs xor zstd_compress raid6_pq libcrc32c dm_mirror dm_region_hash dm_log amdgpu amd_iommu_v2 gpu_sched i2c_algo_bit hid_generic ttm drm_kms_helper
Apr 14 13:08:07 Empyrrean sudo[11642]:    chris : TTY=pts/0 ; PWD=/home/chris/Downloads/amdgpu-pro-19.50-967956-ubuntu-18.04 ; USER=root ; COMMAND=./amdgpu-install -y
Apr 14 13:08:33 Empyrrean sudo[12642]:    chris : TTY=pts/0 ; PWD=/home/chris/Downloads/amdgpu-pro-19.50-967956-ubuntu-18.04 ; USER=root ; COMMAND=./amdgpu-install -y
Apr 14 13:09:00 Empyrrean systemd[1]: Stopping Load/Save Screen Backlight Brightness of backlight:amdgpu_bl0...
Apr 14 13:09:00 Empyrrean systemd[1]: Stopped Load/Save Screen Backlight Brightness of backlight:amdgpu_bl0.
Apr 14 13:09:21 Empyrrean kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-46-generic root=UUID=88249bd2-c093-46f5-9603-ba2f9eb90fb8 ro amdgpu.ppfeaturemask=0xffff7fff
Apr 14 13:09:21 Empyrrean kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-46-generic root=UUID=88249bd2-c093-46f5-9603-ba2f9eb90fb8 ro amdgpu.ppfeaturemask=0xffff7fff
Apr 14 13:09:21 Empyrrean kernel: [drm] amdgpu kernel modesetting enabled.
Apr 14 13:09:21 Empyrrean kernel: amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff
Apr 14 13:09:21 Empyrrean kernel: amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0000000 -> 0xf01fffff
Apr 14 13:09:21 Empyrrean kernel: amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 5: 0xf0600000 -> 0xf067ffff
Apr 14 13:09:21 Empyrrean kernel: fb0: switching to amdgpudrmfb from EFI VGA
Apr 14 13:09:21 Empyrrean kernel: amdgpu 0000:08:00.0: vgaarb: deactivate vga console
Apr 14 13:09:21 Empyrrean kernel: amdgpu 0000:08:00.0: enabling device (0006 -> 0007)
Apr 14 13:09:21 Empyrrean kernel: amdgpu 0000:08:00.0: VRAM: 8176M 0x000000F400000000 - 0x000000F5FEFFFFFF (8176M used)
Apr 14 13:09:21 Empyrrean kernel: amdgpu 0000:08:00.0: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
Apr 14 13:09:21 Empyrrean kernel: amdgpu 0000:08:00.0: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
Apr 14 13:09:21 Empyrrean kernel: [drm] amdgpu: 8176M of VRAM memory ready
Apr 14 13:09:21 Empyrrean kernel: [drm] amdgpu: 8176M of GTT memory ready.
Apr 14 13:09:21 Empyrrean kernel: amdgpu: [powerplay] hwmgr_sw_init smu backed is vega10_smu
Apr 14 13:09:21 Empyrrean kernel: fbcon: amdgpudrmfb (fb0) is primary device
Apr 14 13:09:21 Empyrrean kernel: amdgpu 0000:08:00.0: fb0: amdgpudrmfb frame buffer device
Apr 14 13:09:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring gfx uses VM inv eng 0 on hub 0
Apr 14 13:09:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.0.0 uses VM inv eng 1 on hub 0
Apr 14 13:09:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.1.0 uses VM inv eng 4 on hub 0
Apr 14 13:09:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.2.0 uses VM inv eng 5 on hub 0
Apr 14 13:09:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.3.0 uses VM inv eng 6 on hub 0
Apr 14 13:09:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.0.1 uses VM inv eng 7 on hub 0
Apr 14 13:09:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.1.1 uses VM inv eng 8 on hub 0
Apr 14 13:09:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.2.1 uses VM inv eng 9 on hub 0
Apr 14 13:09:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.3.1 uses VM inv eng 10 on hub 0
Apr 14 13:09:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
Apr 14 13:09:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring sdma0 uses VM inv eng 0 on hub 1
Apr 14 13:09:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring sdma1 uses VM inv eng 1 on hub 1
Apr 14 13:09:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring uvd_0 uses VM inv eng 4 on hub 1
Apr 14 13:09:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring uvd_enc_0.0 uses VM inv eng 5 on hub 1
Apr 14 13:09:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring uvd_enc_0.1 uses VM inv eng 6 on hub 1
Apr 14 13:09:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring vce0 uses VM inv eng 7 on hub 1
Apr 14 13:09:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring vce1 uses VM inv eng 8 on hub 1
Apr 14 13:09:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring vce2 uses VM inv eng 9 on hub 1
Apr 14 13:09:21 Empyrrean kernel: [drm] Initialized amdgpu 3.33.0 20150101 for 0000:08:00.0 on minor 0
Apr 14 13:09:21 Empyrrean systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:amdgpu_bl0...
Apr 14 13:09:21 Empyrrean systemd[1]: Started Load/Save Screen Backlight Brightness of backlight:amdgpu_bl0.
Apr 14 13:09:22 Empyrrean sensors[1213]: amdgpu-pci-0800
Apr 14 13:10:37 Empyrrean sudo[2745]:    chris : TTY=pts/0 ; PWD=/home/chris/Downloads/amdgpu-pro-19.50-967956-ubuntu-18.04 ; USER=root ; COMMAND=./amdgpu-pro-install -y
Apr 14 13:10:57 Empyrrean sudo[3742]:    chris : TTY=pts/0 ; PWD=/home/chris/Downloads/amdgpu-pro-19.50-967956-ubuntu-18.04 ; USER=root ; COMMAND=./amdgpu-pro-install -y
Apr 14 13:12:07 Empyrrean sudo[4790]:    chris : TTY=pts/0 ; PWD=/home/chris/Downloads/amdgpu-pro-19.50-967956-ubuntu-18.04 ; USER=root ; COMMAND=/usr/local/bin/apt install glmark2
Apr 14 13:18:59 Empyrrean sudo[5830]:    chris : TTY=pts/0 ; PWD=/home/chris/Downloads/amdgpu-pro-19.50-967956-ubuntu-18.04 ; USER=root ; COMMAND=./amdgpu-install --uninstall
Apr 14 13:19:23 Empyrrean systemd[1]: Stopping Load/Save Screen Backlight Brightness of backlight:amdgpu_bl0...
Apr 14 13:19:23 Empyrrean systemd[1]: Stopped Load/Save Screen Backlight Brightness of backlight:amdgpu_bl0.
Apr 14 13:19:43 Empyrrean kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-46-generic root=UUID=88249bd2-c093-46f5-9603-ba2f9eb90fb8 ro amdgpu.ppfeaturemask=0xffff7fff
Apr 14 13:19:43 Empyrrean kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-46-generic root=UUID=88249bd2-c093-46f5-9603-ba2f9eb90fb8 ro amdgpu.ppfeaturemask=0xffff7fff
Apr 14 13:19:43 Empyrrean kernel: [drm] amdgpu kernel modesetting enabled.
Apr 14 13:19:43 Empyrrean kernel: amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff
Apr 14 13:19:43 Empyrrean kernel: amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0000000 -> 0xf01fffff
Apr 14 13:19:43 Empyrrean kernel: amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 5: 0xf0600000 -> 0xf067ffff
Apr 14 13:19:43 Empyrrean kernel: fb0: switching to amdgpudrmfb from EFI VGA
Apr 14 13:19:43 Empyrrean kernel: amdgpu 0000:08:00.0: vgaarb: deactivate vga console
Apr 14 13:19:43 Empyrrean kernel: amdgpu 0000:08:00.0: enabling device (0006 -> 0007)
Apr 14 13:19:43 Empyrrean kernel: amdgpu 0000:08:00.0: VRAM: 8176M 0x000000F400000000 - 0x000000F5FEFFFFFF (8176M used)
Apr 14 13:19:43 Empyrrean kernel: amdgpu 0000:08:00.0: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
Apr 14 13:19:43 Empyrrean kernel: amdgpu 0000:08:00.0: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
Apr 14 13:19:43 Empyrrean kernel: [drm] amdgpu: 8176M of VRAM memory ready
Apr 14 13:19:43 Empyrrean kernel: [drm] amdgpu: 8176M of GTT memory ready.
Apr 14 13:19:43 Empyrrean kernel: amdgpu: [powerplay] hwmgr_sw_init smu backed is vega10_smu
Apr 14 13:19:43 Empyrrean kernel: fbcon: amdgpudrmfb (fb0) is primary device
Apr 14 13:19:43 Empyrrean kernel: amdgpu 0000:08:00.0: fb0: amdgpudrmfb frame buffer device
Apr 14 13:19:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring gfx uses VM inv eng 0 on hub 0
Apr 14 13:19:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.0.0 uses VM inv eng 1 on hub 0
Apr 14 13:19:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.1.0 uses VM inv eng 4 on hub 0
Apr 14 13:19:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.2.0 uses VM inv eng 5 on hub 0
Apr 14 13:19:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.3.0 uses VM inv eng 6 on hub 0
Apr 14 13:19:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.0.1 uses VM inv eng 7 on hub 0
Apr 14 13:19:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.1.1 uses VM inv eng 8 on hub 0
Apr 14 13:19:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.2.1 uses VM inv eng 9 on hub 0
Apr 14 13:19:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.3.1 uses VM inv eng 10 on hub 0
Apr 14 13:19:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
Apr 14 13:19:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring sdma0 uses VM inv eng 0 on hub 1
Apr 14 13:19:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring sdma1 uses VM inv eng 1 on hub 1
Apr 14 13:19:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring uvd_0 uses VM inv eng 4 on hub 1
Apr 14 13:19:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring uvd_enc_0.0 uses VM inv eng 5 on hub 1
Apr 14 13:19:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring uvd_enc_0.1 uses VM inv eng 6 on hub 1
Apr 14 13:19:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring vce0 uses VM inv eng 7 on hub 1
Apr 14 13:19:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring vce1 uses VM inv eng 8 on hub 1
Apr 14 13:19:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring vce2 uses VM inv eng 9 on hub 1
Apr 14 13:19:43 Empyrrean kernel: [drm] Initialized amdgpu 3.33.0 20150101 for 0000:08:00.0 on minor 0
Apr 14 13:19:43 Empyrrean systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:amdgpu_bl0...
Apr 14 13:19:43 Empyrrean systemd[1]: Started Load/Save Screen Backlight Brightness of backlight:amdgpu_bl0.
Apr 14 13:19:44 Empyrrean sensors[1073]: amdgpu-pci-0800
Apr 14 13:26:34 Empyrrean sudo[2737]:    chris : TTY=pts/0 ; PWD=/home/chris/Downloads/amdgpu-pro-19.50-967956-ubuntu-18.04 ; USER=root ; COMMAND=./amdgpu-pro-install -y
Apr 14 13:26:50 Empyrrean sudo[3733]:    chris : TTY=pts/0 ; PWD=/home/chris/Downloads/amdgpu-pro-19.50-967956-ubuntu-18.04 ; USER=root ; COMMAND=./amdgpu-pro-install -y
Apr 14 13:27:10 Empyrrean systemd[1]: Stopping Load/Save Screen Backlight Brightness of backlight:amdgpu_bl0...
Apr 14 13:27:10 Empyrrean systemd[1]: Stopped Load/Save Screen Backlight Brightness of backlight:amdgpu_bl0.
Apr 14 13:27:29 Empyrrean kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-46-generic root=UUID=88249bd2-c093-46f5-9603-ba2f9eb90fb8 ro amdgpu.ppfeaturemask=0xffff7fff
Apr 14 13:27:29 Empyrrean kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-46-generic root=UUID=88249bd2-c093-46f5-9603-ba2f9eb90fb8 ro amdgpu.ppfeaturemask=0xffff7fff
Apr 14 13:27:29 Empyrrean kernel: [drm] amdgpu kernel modesetting enabled.
Apr 14 13:27:29 Empyrrean kernel: amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff
Apr 14 13:27:29 Empyrrean kernel: amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0000000 -> 0xf01fffff
Apr 14 13:27:29 Empyrrean kernel: amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 5: 0xf0600000 -> 0xf067ffff
Apr 14 13:27:29 Empyrrean kernel: fb0: switching to amdgpudrmfb from EFI VGA
Apr 14 13:27:29 Empyrrean kernel: amdgpu 0000:08:00.0: vgaarb: deactivate vga console
Apr 14 13:27:29 Empyrrean kernel: amdgpu 0000:08:00.0: enabling device (0006 -> 0007)
Apr 14 13:27:29 Empyrrean kernel: amdgpu 0000:08:00.0: VRAM: 8176M 0x000000F400000000 - 0x000000F5FEFFFFFF (8176M used)
Apr 14 13:27:29 Empyrrean kernel: amdgpu 0000:08:00.0: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
Apr 14 13:27:29 Empyrrean kernel: amdgpu 0000:08:00.0: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
Apr 14 13:27:29 Empyrrean kernel: [drm] amdgpu: 8176M of VRAM memory ready
Apr 14 13:27:29 Empyrrean kernel: [drm] amdgpu: 8176M of GTT memory ready.
Apr 14 13:27:29 Empyrrean kernel: amdgpu: [powerplay] hwmgr_sw_init smu backed is vega10_smu
Apr 14 13:27:29 Empyrrean kernel: fbcon: amdgpudrmfb (fb0) is primary device
Apr 14 13:27:29 Empyrrean kernel: amdgpu 0000:08:00.0: fb0: amdgpudrmfb frame buffer device
Apr 14 13:27:29 Empyrrean kernel: amdgpu 0000:08:00.0: ring gfx uses VM inv eng 0 on hub 0
Apr 14 13:27:29 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.0.0 uses VM inv eng 1 on hub 0
Apr 14 13:27:29 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.1.0 uses VM inv eng 4 on hub 0
Apr 14 13:27:29 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.2.0 uses VM inv eng 5 on hub 0
Apr 14 13:27:29 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.3.0 uses VM inv eng 6 on hub 0
Apr 14 13:27:29 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.0.1 uses VM inv eng 7 on hub 0
Apr 14 13:27:29 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.1.1 uses VM inv eng 8 on hub 0
Apr 14 13:27:29 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.2.1 uses VM inv eng 9 on hub 0
Apr 14 13:27:29 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.3.1 uses VM inv eng 10 on hub 0
Apr 14 13:27:29 Empyrrean kernel: amdgpu 0000:08:00.0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
Apr 14 13:27:29 Empyrrean kernel: amdgpu 0000:08:00.0: ring sdma0 uses VM inv eng 0 on hub 1
Apr 14 13:27:29 Empyrrean kernel: amdgpu 0000:08:00.0: ring sdma1 uses VM inv eng 1 on hub 1
Apr 14 13:27:29 Empyrrean kernel: amdgpu 0000:08:00.0: ring uvd_0 uses VM inv eng 4 on hub 1
Apr 14 13:27:29 Empyrrean kernel: amdgpu 0000:08:00.0: ring uvd_enc_0.0 uses VM inv eng 5 on hub 1
Apr 14 13:27:29 Empyrrean kernel: amdgpu 0000:08:00.0: ring uvd_enc_0.1 uses VM inv eng 6 on hub 1
Apr 14 13:27:29 Empyrrean kernel: amdgpu 0000:08:00.0: ring vce0 uses VM inv eng 7 on hub 1
Apr 14 13:27:29 Empyrrean kernel: amdgpu 0000:08:00.0: ring vce1 uses VM inv eng 8 on hub 1
Apr 14 13:27:29 Empyrrean kernel: amdgpu 0000:08:00.0: ring vce2 uses VM inv eng 9 on hub 1
Apr 14 13:27:29 Empyrrean kernel: [drm] Initialized amdgpu 3.33.0 20150101 for 0000:08:00.0 on minor 0
Apr 14 13:27:30 Empyrrean systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:amdgpu_bl0...
Apr 14 13:27:30 Empyrrean systemd[1]: Started Load/Save Screen Backlight Brightness of backlight:amdgpu_bl0.
Apr 14 13:27:30 Empyrrean sensors[1047]: amdgpu-pci-0800
Apr 14 13:34:08 Empyrrean sudo[2630]:    chris : TTY=pts/0 ; PWD=/home/chris/Downloads/amdgpu-pro-19.50-967956-ubuntu-18.04 ; USER=root ; COMMAND=/bin/rm -rf /usr/bin/amdgpu-pro-uninstall /etc/apt/sources.list.d/amdgpu-pro-local.list /var/opt/amdgpu-pro-local
Apr 14 13:34:08 Empyrrean sudo[2632]:    chris : TTY=pts/0 ; PWD=/home/chris/Downloads/amdgpu-pro-19.50-967956-ubuntu-18.04 ; USER=root ; COMMAND=/usr/bin/apt-get update
Apr 14 13:34:24 Empyrrean systemd[1]: Stopping Load/Save Screen Backlight Brightness of backlight:amdgpu_bl0...
Apr 14 13:34:24 Empyrrean systemd[1]: Stopped Load/Save Screen Backlight Brightness of backlight:amdgpu_bl0.
Apr 14 13:34:43 Empyrrean kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-46-generic root=UUID=88249bd2-c093-46f5-9603-ba2f9eb90fb8 ro amdgpu.ppfeaturemask=0xffff7fff
Apr 14 13:34:43 Empyrrean kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-46-generic root=UUID=88249bd2-c093-46f5-9603-ba2f9eb90fb8 ro amdgpu.ppfeaturemask=0xffff7fff
Apr 14 13:34:43 Empyrrean kernel: [drm] amdgpu kernel modesetting enabled.
Apr 14 13:34:43 Empyrrean kernel: amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff
Apr 14 13:34:43 Empyrrean kernel: amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0000000 -> 0xf01fffff
Apr 14 13:34:43 Empyrrean kernel: amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 5: 0xf0600000 -> 0xf067ffff
Apr 14 13:34:43 Empyrrean kernel: fb0: switching to amdgpudrmfb from EFI VGA
Apr 14 13:34:43 Empyrrean kernel: amdgpu 0000:08:00.0: vgaarb: deactivate vga console
Apr 14 13:34:43 Empyrrean kernel: amdgpu 0000:08:00.0: enabling device (0006 -> 0007)
Apr 14 13:34:43 Empyrrean kernel: amdgpu 0000:08:00.0: VRAM: 8176M 0x000000F400000000 - 0x000000F5FEFFFFFF (8176M used)
Apr 14 13:34:43 Empyrrean kernel: amdgpu 0000:08:00.0: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
Apr 14 13:34:43 Empyrrean kernel: amdgpu 0000:08:00.0: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
Apr 14 13:34:43 Empyrrean kernel: [drm] amdgpu: 8176M of VRAM memory ready
Apr 14 13:34:43 Empyrrean kernel: [drm] amdgpu: 8176M of GTT memory ready.
Apr 14 13:34:43 Empyrrean kernel: amdgpu: [powerplay] hwmgr_sw_init smu backed is vega10_smu
Apr 14 13:34:43 Empyrrean kernel: fbcon: amdgpudrmfb (fb0) is primary device
Apr 14 13:34:43 Empyrrean kernel: amdgpu 0000:08:00.0: fb0: amdgpudrmfb frame buffer device
Apr 14 13:34:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring gfx uses VM inv eng 0 on hub 0
Apr 14 13:34:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.0.0 uses VM inv eng 1 on hub 0
Apr 14 13:34:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.1.0 uses VM inv eng 4 on hub 0
Apr 14 13:34:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.2.0 uses VM inv eng 5 on hub 0
Apr 14 13:34:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.3.0 uses VM inv eng 6 on hub 0
Apr 14 13:34:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.0.1 uses VM inv eng 7 on hub 0
Apr 14 13:34:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.1.1 uses VM inv eng 8 on hub 0
Apr 14 13:34:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.2.1 uses VM inv eng 9 on hub 0
Apr 14 13:34:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.3.1 uses VM inv eng 10 on hub 0
Apr 14 13:34:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
Apr 14 13:34:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring sdma0 uses VM inv eng 0 on hub 1
Apr 14 13:34:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring sdma1 uses VM inv eng 1 on hub 1
Apr 14 13:34:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring uvd_0 uses VM inv eng 4 on hub 1
Apr 14 13:34:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring uvd_enc_0.0 uses VM inv eng 5 on hub 1
Apr 14 13:34:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring uvd_enc_0.1 uses VM inv eng 6 on hub 1
Apr 14 13:34:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring vce0 uses VM inv eng 7 on hub 1
Apr 14 13:34:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring vce1 uses VM inv eng 8 on hub 1
Apr 14 13:34:43 Empyrrean kernel: amdgpu 0000:08:00.0: ring vce2 uses VM inv eng 9 on hub 1
Apr 14 13:34:43 Empyrrean kernel: [drm] Initialized amdgpu 3.33.0 20150101 for 0000:08:00.0 on minor 0
Apr 14 13:34:44 Empyrrean systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:amdgpu_bl0...
Apr 14 13:34:44 Empyrrean systemd[1]: Started Load/Save Screen Backlight Brightness of backlight:amdgpu_bl0.
Apr 14 13:34:44 Empyrrean sensors[1233]: amdgpu-pci-0800
Apr 14 13:37:07 Empyrrean sudo[2422]:    chris : TTY=pts/0 ; PWD=/home/chris/Downloads/amdgpu-pro-19.50-967956-ubuntu-18.04 ; USER=root ; COMMAND=./amdgpu-pro-install
Apr 14 13:43:50 Empyrrean sudo[14417]:    chris : TTY=pts/0 ; PWD=/home/chris/Downloads/amdgpu-pro-19.50-967956-ubuntu-18.04 ; USER=root ; COMMAND=/usr/local/bin/apt purge amdgpu-core
Apr 14 13:44:00 Empyrrean sudo[14576]:    chris : TTY=pts/0 ; PWD=/home/chris/Downloads/amdgpu-pro-19.50-967956-ubuntu-18.04 ; USER=root ; COMMAND=/usr/local/bin/apt purge amdgpu-pro-pin
Apr 14 13:44:06 Empyrrean sudo[14644]:    chris : TTY=pts/0 ; PWD=/home/chris/Downloads/amdgpu-pro-19.50-967956-ubuntu-18.04 ; USER=root ; COMMAND=/bin/rm -rf /usr/bin/amdgpu-pro-uninstall /etc/apt/sources.list.d/amdgpu-pro-local.list /var/opt/amdgpu-pro-local
Apr 14 13:44:06 Empyrrean sudo[14646]:    chris : TTY=pts/0 ; PWD=/home/chris/Downloads/amdgpu-pro-19.50-967956-ubuntu-18.04 ; USER=root ; COMMAND=/usr/bin/apt-get update
Apr 14 13:44:25 Empyrrean sudo[15609]:    chris : TTY=pts/0 ; PWD=/home/chris/Downloads/amdgpu-pro-19.50-967956-ubuntu-18.04 ; USER=root ; COMMAND=/usr/local/bin/apt install amdgpu-dkms
Apr 14 14:07:40 Empyrrean sudo[17251]:    chris : TTY=pts/0 ; PWD=/home/chris/Downloads/amdgpu-pro-19.50-967956-ubuntu-18.04 ; USER=root ; COMMAND=/usr/bin/apt-key add -
Apr 14 14:07:48 Empyrrean sudo[17577]:    chris : TTY=pts/0 ; PWD=/home/chris/Downloads/amdgpu-pro-19.50-967956-ubuntu-18.04 ; USER=root ; COMMAND=/usr/bin/wget -qO /etc/apt/sources.list.d/lunarg-vulkan-bionic.list http://packages.lunarg.com/vulkan/lunarg-vulkan-bionic.list
Apr 14 14:07:56 Empyrrean sudo[17579]:    chris : TTY=pts/0 ; PWD=/home/chris/Downloads/amdgpu-pro-19.50-967956-ubuntu-18.04 ; USER=root ; COMMAND=/usr/local/bin/apt update
Apr 14 14:08:07 Empyrrean sudo[18613]:    chris : TTY=pts/0 ; PWD=/home/chris/Downloads/amdgpu-pro-19.50-967956-ubuntu-18.04 ; USER=root ; COMMAND=/usr/local/bin/apt install vulkan-sdk
Apr 14 14:10:02 Empyrrean sudo[20359]:    chris : TTY=pts/0 ; PWD=/home/chris/Downloads/amdgpu-pro-20.10-1028677-ubuntu-18.04 ; USER=root ; COMMAND=/usr/local/bin/apt install build-essential
Apr 14 14:11:25 Empyrrean sudo[20385]:    chris : TTY=pts/0 ; PWD=/home/chris/Downloads/amdgpu-pro-20.10-1028677-ubuntu-18.04 ; USER=root ; COMMAND=./amdgpu-pro-install --opencl=pal
Apr 14 14:13:33 Empyrrean systemd[1]: Stopping Load/Save Screen Backlight Brightness of backlight:amdgpu_bl0...
Apr 14 14:13:33 Empyrrean systemd[1]: Stopped Load/Save Screen Backlight Brightness of backlight:amdgpu_bl0.
Apr 14 14:13:54 Empyrrean kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-46-generic root=UUID=88249bd2-c093-46f5-9603-ba2f9eb90fb8 ro amdgpu.ppfeaturemask=0xffff7fff
Apr 14 14:13:54 Empyrrean kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-46-generic root=UUID=88249bd2-c093-46f5-9603-ba2f9eb90fb8 ro amdgpu.ppfeaturemask=0xffff7fff
Apr 14 14:13:55 Empyrrean kernel: [drm] amdgpu kernel modesetting enabled.
Apr 14 14:13:55 Empyrrean kernel: [drm] amdgpu version: 5.4.7.20.10
Apr 14 14:13:55 Empyrrean kernel: amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff
Apr 14 14:13:55 Empyrrean kernel: amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0000000 -> 0xf01fffff
Apr 14 14:13:55 Empyrrean kernel: amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 5: 0xf0600000 -> 0xf067ffff
Apr 14 14:13:55 Empyrrean kernel: fb0: switching to amdgpudrmfb from EFI VGA
Apr 14 14:13:55 Empyrrean kernel: amdgpu 0000:08:00.0: vgaarb: deactivate vga console
Apr 14 14:13:55 Empyrrean kernel: amdgpu 0000:08:00.0: enabling device (0006 -> 0007)
Apr 14 14:13:55 Empyrrean kernel: amdgpu 0000:08:00.0: VRAM: 8176M 0x000000F400000000 - 0x000000F5FEFFFFFF (8176M used)
Apr 14 14:13:55 Empyrrean kernel: amdgpu 0000:08:00.0: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
Apr 14 14:13:55 Empyrrean kernel: amdgpu 0000:08:00.0: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
Apr 14 14:13:55 Empyrrean kernel: [drm] amdgpu: 8176M of VRAM memory ready
Apr 14 14:13:55 Empyrrean kernel: [drm] amdgpu: 8176M of GTT memory ready.
Apr 14 14:13:55 Empyrrean kernel: amdgpu: [powerplay] hwmgr_sw_init smu backed is vega10_smu
Apr 14 14:13:55 Empyrrean kernel: fbcon: amdgpudrmfb (fb0) is primary device
Apr 14 14:13:55 Empyrrean kernel: amdgpu 0000:08:00.0: fb0: amdgpudrmfb frame buffer device
Apr 14 14:13:55 Empyrrean kernel: amdgpu 0000:08:00.0: ring gfx uses VM inv eng 0 on hub 0
Apr 14 14:13:55 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.0.0 uses VM inv eng 1 on hub 0
Apr 14 14:13:55 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.1.0 uses VM inv eng 4 on hub 0
Apr 14 14:13:55 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.2.0 uses VM inv eng 5 on hub 0
Apr 14 14:13:55 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.3.0 uses VM inv eng 6 on hub 0
Apr 14 14:13:55 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.0.1 uses VM inv eng 7 on hub 0
Apr 14 14:13:55 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.1.1 uses VM inv eng 8 on hub 0
Apr 14 14:13:55 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.2.1 uses VM inv eng 9 on hub 0
Apr 14 14:13:55 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.3.1 uses VM inv eng 10 on hub 0
Apr 14 14:13:55 Empyrrean kernel: amdgpu 0000:08:00.0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
Apr 14 14:13:55 Empyrrean kernel: amdgpu 0000:08:00.0: ring sdma0 uses VM inv eng 0 on hub 1
Apr 14 14:13:55 Empyrrean kernel: amdgpu 0000:08:00.0: ring page0 uses VM inv eng 1 on hub 1
Apr 14 14:13:55 Empyrrean kernel: amdgpu 0000:08:00.0: ring sdma1 uses VM inv eng 4 on hub 1
Apr 14 14:13:55 Empyrrean kernel: amdgpu 0000:08:00.0: ring page1 uses VM inv eng 5 on hub 1
Apr 14 14:13:55 Empyrrean kernel: amdgpu 0000:08:00.0: ring uvd_0 uses VM inv eng 6 on hub 1
Apr 14 14:13:55 Empyrrean kernel: amdgpu 0000:08:00.0: ring uvd_enc_0.0 uses VM inv eng 7 on hub 1
Apr 14 14:13:55 Empyrrean kernel: amdgpu 0000:08:00.0: ring uvd_enc_0.1 uses VM inv eng 8 on hub 1
Apr 14 14:13:55 Empyrrean kernel: amdgpu 0000:08:00.0: ring vce0 uses VM inv eng 9 on hub 1
Apr 14 14:13:55 Empyrrean kernel: amdgpu 0000:08:00.0: ring vce1 uses VM inv eng 10 on hub 1
Apr 14 14:13:55 Empyrrean kernel: amdgpu 0000:08:00.0: ring vce2 uses VM inv eng 11 on hub 1
Apr 14 14:13:55 Empyrrean kernel: [drm] Initialized amdgpu 3.36.0 20150101 for 0000:08:00.0 on minor 0
Apr 14 14:13:55 Empyrrean systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:amdgpu_bl0...
Apr 14 14:13:55 Empyrrean systemd[1]: Started Load/Save Screen Backlight Brightness of backlight:amdgpu_bl0.
Apr 14 14:38:20 Empyrrean kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-46-generic root=UUID=88249bd2-c093-46f5-9603-ba2f9eb90fb8 ro amdgpu.ppfeaturemask=0xffff7fff
Apr 14 14:38:20 Empyrrean kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-46-generic root=UUID=88249bd2-c093-46f5-9603-ba2f9eb90fb8 ro amdgpu.ppfeaturemask=0xffff7fff
Apr 14 14:38:21 Empyrrean kernel: [drm] amdgpu kernel modesetting enabled.
Apr 14 14:38:21 Empyrrean kernel: [drm] amdgpu version: 5.4.7.20.10
Apr 14 14:38:21 Empyrrean kernel: amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff
Apr 14 14:38:21 Empyrrean kernel: amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0000000 -> 0xf01fffff
Apr 14 14:38:21 Empyrrean kernel: amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 5: 0xf0600000 -> 0xf067ffff
Apr 14 14:38:21 Empyrrean kernel: fb0: switching to amdgpudrmfb from EFI VGA
Apr 14 14:38:21 Empyrrean kernel: amdgpu 0000:08:00.0: vgaarb: deactivate vga console
Apr 14 14:38:21 Empyrrean kernel: amdgpu 0000:08:00.0: enabling device (0006 -> 0007)
Apr 14 14:38:21 Empyrrean kernel: amdgpu 0000:08:00.0: VRAM: 8176M 0x000000F400000000 - 0x000000F5FEFFFFFF (8176M used)
Apr 14 14:38:21 Empyrrean kernel: amdgpu 0000:08:00.0: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
Apr 14 14:38:21 Empyrrean kernel: amdgpu 0000:08:00.0: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
Apr 14 14:38:21 Empyrrean kernel: [drm] amdgpu: 8176M of VRAM memory ready
Apr 14 14:38:21 Empyrrean kernel: [drm] amdgpu: 8176M of GTT memory ready.
Apr 14 14:38:21 Empyrrean kernel: amdgpu: [powerplay] hwmgr_sw_init smu backed is vega10_smu
Apr 14 14:38:21 Empyrrean kernel: fbcon: amdgpudrmfb (fb0) is primary device
Apr 14 14:38:21 Empyrrean kernel: amdgpu 0000:08:00.0: fb0: amdgpudrmfb frame buffer device
Apr 14 14:38:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring gfx uses VM inv eng 0 on hub 0
Apr 14 14:38:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.0.0 uses VM inv eng 1 on hub 0
Apr 14 14:38:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.1.0 uses VM inv eng 4 on hub 0
Apr 14 14:38:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.2.0 uses VM inv eng 5 on hub 0
Apr 14 14:38:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.3.0 uses VM inv eng 6 on hub 0
Apr 14 14:38:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.0.1 uses VM inv eng 7 on hub 0
Apr 14 14:38:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.1.1 uses VM inv eng 8 on hub 0
Apr 14 14:38:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.2.1 uses VM inv eng 9 on hub 0
Apr 14 14:38:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring comp_1.3.1 uses VM inv eng 10 on hub 0
Apr 14 14:38:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
Apr 14 14:38:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring sdma0 uses VM inv eng 0 on hub 1
Apr 14 14:38:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring page0 uses VM inv eng 1 on hub 1
Apr 14 14:38:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring sdma1 uses VM inv eng 4 on hub 1
Apr 14 14:38:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring page1 uses VM inv eng 5 on hub 1
Apr 14 14:38:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring uvd_0 uses VM inv eng 6 on hub 1
Apr 14 14:38:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring uvd_enc_0.0 uses VM inv eng 7 on hub 1
Apr 14 14:38:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring uvd_enc_0.1 uses VM inv eng 8 on hub 1
Apr 14 14:38:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring vce0 uses VM inv eng 9 on hub 1
Apr 14 14:38:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring vce1 uses VM inv eng 10 on hub 1
Apr 14 14:38:21 Empyrrean kernel: amdgpu 0000:08:00.0: ring vce2 uses VM inv eng 11 on hub 1
Apr 14 14:38:21 Empyrrean kernel: [drm] Initialized amdgpu 3.36.0 20150101 for 0000:08:00.0 on minor 0
Apr 14 14:38:21 Empyrrean systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:amdgpu_bl0...
Apr 14 14:38:21 Empyrrean systemd[1]: Started Load/Save Screen Backlight Brightness of backlight:amdgpu_bl0.

lspci -k

Code: Select all

00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Root Complex
	Subsystem: Acer Incorporated [ALI] Family 17h (Models 00h-0fh) Root Complex
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) I/O Memory Management Unit
	Subsystem: Acer Incorporated [ALI] Family 17h (Models 00h-0fh) I/O Memory Management Unit
00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe Dummy Host Bridge
00:01.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe GPP Bridge
	Kernel driver in use: pcieport
00:01.3 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe GPP Bridge
	Kernel driver in use: pcieport
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe Dummy Host Bridge
00:03.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe Dummy Host Bridge
00:03.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe GPP Bridge
	Kernel driver in use: pcieport
00:04.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe Dummy Host Bridge
00:07.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe Dummy Host Bridge
00:07.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Internal PCIe GPP Bridge 0 to Bus B
	Kernel driver in use: pcieport
00:08.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe Dummy Host Bridge
00:08.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Internal PCIe GPP Bridge 0 to Bus B
	Kernel driver in use: pcieport
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 59)
	Subsystem: Acer Incorporated [ALI] FCH SMBus Controller
	Kernel driver in use: piix4_smbus
	Kernel modules: i2c_piix4, sp5100_tco
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 51)
	Subsystem: Acer Incorporated [ALI] FCH LPC Bridge
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 3
	Kernel driver in use: k10temp
	Kernel modules: k10temp
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 5
00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 6
00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 7
01:00.0 Non-Volatile memory controller: SK hynix Device 1504
	Subsystem: Thales e-Security Device 1093
	Kernel driver in use: nvme
	Kernel modules: nvme
02:00.0 USB controller: Advanced Micro Devices, Inc. [AMD] Device 43d5 (rev 01)
	Subsystem: Acer Incorporated [ALI] Device 1246
	Kernel driver in use: xhci_hcd
02:00.1 SATA controller: Advanced Micro Devices, Inc. [AMD] Device 43c8 (rev 01)
	Subsystem: Acer Incorporated [ALI] Device 1246
	Kernel driver in use: ahci
	Kernel modules: ahci
02:00.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 43c6 (rev 01)
	Kernel driver in use: pcieport
03:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 43c7 (rev 01)
	Kernel driver in use: pcieport
03:01.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 43c7 (rev 01)
	Kernel driver in use: pcieport
04:00.0 Ethernet controller: Qualcomm Atheros Killer E2500 Gigabit Ethernet Controller (rev 10)
	Subsystem: Acer Incorporated [ALI] Killer E2500 Gigabit Ethernet Controller
	Kernel driver in use: alx
	Kernel modules: alx
05:00.0 Network controller: Intel Corporation Wireless-AC 9260 (rev 29)
	Subsystem: Bigfoot Networks, Inc. Device 1550
	Kernel driver in use: iwlwifi
	Kernel modules: iwlwifi
06:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 1470 (rev c7)
	Kernel driver in use: pcieport
07:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 1471
	Kernel driver in use: pcieport
08:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Vega 10 XT [Radeon RX Vega 64] (rev c7)
	Subsystem: Acer Incorporated [ALI] Vega 10 XT [Radeon RX Vega 64]
	Kernel driver in use: amdgpu
	Kernel modules: amdgpu
08:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device aaf8
	Subsystem: Acer Incorporated [ALI] Device 1246
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
09:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Device 145a
	Subsystem: Acer Incorporated [ALI] Device 1246
09:00.2 Encryption controller: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Platform Security Processor
	Subsystem: Acer Incorporated [ALI] Family 17h (Models 00h-0fh) Platform Security Processor
	Kernel driver in use: ccp
	Kernel modules: ccp
09:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] USB 3.0 Host controller
	Subsystem: Acer Incorporated [ALI] USB 3.0 Host controller
	Kernel driver in use: xhci_hcd
0a:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Device 1455
	Subsystem: Acer Incorporated [ALI] Device 1246
0a:00.2 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 51)
	Subsystem: Acer Incorporated [ALI] FCH SATA Controller [AHCI mode]
	Kernel driver in use: ahci
	Kernel modules: ahci
0a:00.3 Audio device: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) HD Audio Controller
	Subsystem: Acer Incorporated [ALI] Family 17h (Models 00h-0fh) HD Audio Controller
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

Thank you for any help you're able to offer, I appreciate being a part of this community!

EDIT: Here is my sensors data after a reboot

Code: Select all

amdgpu-pci-0800
Adapter: PCI adapter
vddgfx:       +0.81 V  
fan1:           0 RPM  (min =    0 RPM, max =    0 RPM)
edge:         +49.0°C  (crit = +85.0°C, hyst = -273.1°C)
                       (emerg = +90.0°C)
junction:     +51.0°C  (crit = +105.0°C, hyst = -273.1°C)
                       (emerg = +110.0°C)
mem:          +49.0°C  (crit = +95.0°C, hyst = -273.1°C)
                       (emerg = +100.0°C)
power1:       15.00 W  (cap = 120.00 W)

k10temp-pci-00c3
Adapter: PCI adapter
Tdie:         +51.0°C  (high = +70.0°C)
Tctl:         +51.0°C

I was watching the sensor output (1 second refresh) and the 'amdgpu-pci-0800' never got within 10°C of the 'crit' levels.
However, the k10temp-pci-00c3 did get to 75.9°C before everything froze and I had to reboot.
One other thing, this time after it froze, the screen went black after a few seconds and switched to a staticy image, slightly similar to the 'snow' with non-digital televisions. That static is something that happens on resuming from sleep, apparently, to users in both Windows & Linux of this laptop. I believe it's suspected to be due to the refresh rate not being set correctly, but I read that discussion months ago.

[sleeper12]

Just a guess, but since you have AMD Ryzen CPU, maybe #27 here:
https://easylinuxtipsproject.blogspot.c ... .html#ID27

[trytip]

Dear Customer,

Your service request : SR #{ticketno:[8**********]} has been reviewed and updated.

Response and Service Request History:

Thank you for the email.

Please to be informed that there are no officially supported drivers for this 2200G APU card for Linux operating system. The only available drivers are for the windows 10 operating system.

https://www.amd.com/en/support/apu/amd- ... -ryzen-5-0

Thanks for contacting AMD.

In order to update this service request, please respond without deleting or modifying the service request reference number in the email subject or in the email correspondence below.

Please Note: This service request will automatically close if we do not receive a response within 10 days and cannot be reopened.

If it is not feasible to respond within 10 days, feel free to open a new service request and reference this ticket for continued support.

Best regards,

AMD Global Customer Care

ask amd forums not here

[N7_X]

Just a guess, but since you have AMD Ryzen CPU, maybe #27 here:
https://easylinuxtipsproject.blogspot.c ... .html#ID27

Hmm, I've actually never seen this one before. The only part I couldn't follow was the BIOS option, as this laptop BIOS is extremely basic with no power options.
Rebooted, ran Unigine to assess, and it unfortunately still failed. But I do believe that it is a power issue, if you have any more ideas relating to that?

ask amd forums not here

I wonder if you meant to reply to a different post, as the referenced APU is not a part of my system (You'll notice I have a desktop Ryzen 2700 in here which is supported) as well as my video card (Vega 56) per the amdgpu-pro package. At least according to several other Linux users of this card, as well as AMD documentation.

[sleeper12]

Just a guess, but since you have AMD Ryzen CPU, maybe #27 here:
https://easylinuxtipsproject.blogspot.c ... .html#ID27

Hmm, I've actually never seen this one before. The only part I couldn't follow was the BIOS option, as this laptop BIOS is extremely basic with no power options.
Rebooted, ran Unigine to assess, and it unfortunately still failed. But I do believe that it is a power issue, if you have any more ideas relating to that?

Sorry to say, but that's all I have.

[N7_X]

Alright, well thank you for the suggestion! At least I can eliminate one more possibility.

[N7_X]

Well this is interesting, I did some more research and found this thread https://gitlab.freedesktop.org/drm/amd/issues/716 where several users are experiencing issues when they are gaming for extended periods of time.
They had the following workaround:

Code: Select all

echo manual > /sys/class/drm/card0/device/power_dpm_force_performance_level
echo 7 > /sys/class/drm/card0/device/pp_dpm_sclk

I had to run those commands as root, since sudo still gave me "permission denied."
Unfortunately, this didn't resolve the problem for me, but the behaviour on my end was definitely odd. After setting the power_dpm to manual, the frame rate on Unigine is similar to what I experienced with the open source drivers. This is even with cat'ing pp_dpm_sclk to confirm that it was running at 7. Lowering the speed further lowered the framerate, but the max seemed to be between 20 & 30.
Resetting and rebooting restored normal speed, upwards of 50 fps.

Very odd, in my mind, does anyone have any new ideas from that?
The major difference I see between the users in that thread and myself, is that they would only run into it when gaming for extended periods of time, and I'll get it (relatively) instantly when running a benchmark. No games here

[N7_X]

Finally found the info that initially made me believe the root cause was power related https://askubuntu.com/questions/1122662 ... -supply-is

I tried the solution by Pawel Czmok, who coincidentally has the exact same laptop as mine, but that did not work for me. The charge light still fails to show a charge state, GPU performance is either low or locks up the computer.
Notice with upower that my ACAD states online status as "no" even though it is plugged in and running on AC.


upower -d

Code: Select all

Device: /org/freedesktop/UPower/devices/line_power_ACAD
  native-path:          ACAD
  power supply:         yes
  updated:              Wed 15 Apr 2020 01:24:16 PM EDT (2006 seconds ago)
  has history:          no
  has statistics:       no
  line-power
    warning-level:       none
    online:              no
    icon-name:          'ac-adapter-symbolic'

Device: /org/freedesktop/UPower/devices/battery_BAT1
  native-path:          BAT1
  vendor:               PANASONIC
  model:                AP17C5P
  serial:               48
  power supply:         yes
  updated:              Wed 15 Apr 2020 01:56:27 PM EDT (75 seconds ago)
  has history:          yes
  has statistics:       yes
  battery
    present:             yes
    rechargeable:        yes
    state:               discharging
    warning-level:       none
    energy:              61.4152 Wh
    energy-empty:        0 Wh
    energy-full:         63.063 Wh
    energy-full-design:  74.074 Wh
    energy-rate:         0.173551 W
    voltage:             16.937 V
    percentage:          97%
    capacity:            85.1351%
    technology:          lithium-ion
    icon-name:          'battery-full-symbolic'

Device: /org/freedesktop/UPower/devices/DisplayDevice
  power supply:         yes
  updated:              Wed 15 Apr 2020 01:54:27 PM EDT (195 seconds ago)
  has history:          no
  has statistics:       no
  battery
    present:             yes
    state:               discharging
    warning-level:       none
    energy:              61.4152 Wh
    energy-full:         63.063 Wh
    energy-rate:         0.173551 W
    percentage:          97%
    icon-name:          'battery-full-symbolic'

Daemon:
  daemon-version:  0.99.7
  on-battery:      yes
  lid-is-closed:   no
  lid-is-present:  yes
  critical-action: HybridSleep

Additionally, like OP in the link above, dmesg shows the ACAD as online during bootup.

dmesg | grep ACAD

Code: Select all

[    1.144871] ACPI: AC Adapter [ACAD] (on-line)

Since they mention that the issue lies with the ACPI tables, and assuming that assessment is correct, how would I go about resolving that?

[N7_X]

I apologize for so many posts, but I'm trying to separate information as I figure more out.
This has to do with ACPI & DSDT. I went down a rabbit hole and found this page https://iam.tj/prototype/enhancements/W ... i_osi.html which really seemed to be a potential solution. So I followed the direction of adding the following line to the grub config file:

Code: Select all

GRUB_CMDLINE_LINUX_DEFAULT="acpi_osi=! \"acpi_osi=Windows 2019\" amdgpu.ppfeaturemask=0xffff7fff"

*Amdgpu featuremask got my sound working again per my previous thread referenced in the OP.

Now when I put in "Windows 2016" - "Windows 2019" the system will hang during boot time for a minute or so, continue again a short distance before finally stopping completely. "Windows 2015" booted without an issue, but the power problems are still here.

I'm attaching photos of both states, since the journalctl did not include all of the information I saw during the boot process.
I think I'm on the right track, but I currently think I may have hit a wall. Thoughts? Comments? If you think I should ask a question about this new information somewhere else, just let me know where and I'll post there.

Thank you!

[N7_X]

Another update. Again, please let me know if I need to ask this question elsewhere!
Disassembled my DSDT table, and it seems like it's missing some significant information.

Code: Select all

/*
 * Intel ACPI Component Architecture
 * AML/ASL+ Disassembler version 20180105 (64-bit version)
 * Copyright (c) 2000 - 2018 Intel Corporation
 * 
 * Disassembling to symbolic ASL+ operators
 *
 * Disassembly of dsdt.dat, Wed Apr 15 18:41:55 2020
 *
 * Original Table Header:
 *     Signature        "DSDT"
 *     Length           0x00000024 (36)
 *     Revision         0x01 **** 32-bit table (V1), no 64-bit math support
 *     Checksum         0xB4
 *     OEM ID           "ACRSYS"
 *     OEM Table ID     "ACRPRDCT"
 *     OEM Revision     0x00040000 (262144)
 *     Compiler ID      "1025"
 *     Compiler Version 0x00040000 (262144)
 */
DefinitionBlock ("", "DSDT", 1, "ACRSYS", "ACRPRDCT", 0x00040000)
{

[trytip]

test this:

Code: Select all

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash amdgpu.ppfeaturemask=0xfffd7fff amdgpu.dc=1 amdgpu.hw_i2c=1 amdgpu.vm_fragment_size=9 amdgpu.dpm=1 amdgpu.audio=1 amdgpu.ngg=1 selinux=0 security=off audit=0 spectre_v2=off nopti pti=off toram"

comment out your grub line but don't delete it. after every boot first thing open Logs/Important you will see if there is difference between kernel boot parameters. if Logs are basically the same test with no parameters. lot of booting and rebooting

[pczmok]

About restarting - i had same issue and i solved my problem - that was overheating during max load. HBM2 do not likes too much heat and i workaround it like this:
install NBFC (https://github.com/hirschmann/nbfc)
and then use this command to manually set fan speed:
watch -n 0.1 'mono ec-probe.exe write 0x4f XX' - GPU fan
watch -n 0.1 'mono ec-probe.exe write 0x55 XX' - CPU fan

The "XX" is the "fan speed value" and you can set values 0-11.
refresh is so often, because something try to revert this values.
But be aware that before doing that you need to set on windows fans to "auto". In othercase nbfc do not working correctly. Probably drivers on Windows set some state that after that values from EC are ignored.

After that i forgot about problems with freezing and now i can play and working without troubles:)

[mr_raider]

About restarting - i had same issue and i solved my problem - that was overheating during max load. HBM2 do not likes too much heat and i workaround it like this:
install NBFC (https://github.com/hirschmann/nbfc)
and then use this command to manually set fan speed:
watch -n 0.1 'mono ec-probe.exe write 0x4f XX' - GPU fan
watch -n 0.1 'mono ec-probe.exe write 0x55 XX' - CPU fan

The "XX" is the "fan speed value" and you can set values 0-11.
refresh is so often, because something try to revert this values.
But be aware that before doing that you need to set on windows fans to "auto". In othercase nbfc do not working correctly. Probably drivers on Windows set some state that after that values from EC are ignored.

After that i forgot about problems with freezing and now i can play and working without troubles:)

There have been significant updates to AMD drivers since April. I have a newer card than you (AMD rx 5700) and have had excellent performance using kernel 5.4 and an updated mesa (20.2). That's really all you need in 19.3/18.04 based OSes.

Your system however has been significantly modified and I notice a lot of repositories added that I don't recognize. I would be hesitant to make any recommendations

[pczmok]

Yes sure, performance is correct since some time, but i only answer question why system freezing. I have same issue on Linux and Windows and i need to manual adjust my fan speed depends on load. In other case my system crashing/glitches/freeze.

The temperature on the GPU, in my case, may not exceed 70 degrees. This notebook cooling is quite good, so i can easily keep temperature under 70 degrees, even on the full load of GPU/CPU.

[N7_X]

I took a long break from this because work had gotten so busy. Finally had the opportunity to look at it again this week, and decided to start over with a fresh install.
Mint 20.1 beta is out at the time of writing this, so I downloaded that to use as my fresh install image (Note: I do this because I have never experienced a significant issue with Mint betas. I do not recommend making a habit of testing issues with beta distros)

First I updated the kernel to 5.8.x, added the oibaf graphics drivers ppa (for mesa), and set the boot command line to "amdgpu.dpm=0" to disable the dynamic power mode.
Testing several reboots since then, the laptop will boot up recognizing the power adapter. It still fails to detect the state change if you unplug and plug it back in.
Testing the graphics performance showed that the GPU was in low power mode. Not a huge issue for me, as this laptop is not used for gaming, though I do some work that would be very handy with more power.

Next step was to download and install this fix: https://github.com/pastaq/Acer-Ryzen-Helios-AC-Fix/ to hopefully give me back that missing power.
Now unfortunately I did not test that before trying the pczmok fan control, but I had great success with manually setting the fan speeds.

Finally, I turned off the manual fan settings and just ran the Unigine Valley benchmark. No issues happened through 2 full loops of the benchmark on maximum settings! I'll be testing if that performance survives a reboot in a moment, but I wanted to write down everything I did first, so as to not muddy the waters.
I will post an update with *hopefully* good news after some further testing.

Thank you!

[N7_X]

inxi -CSG -xx

Code: Select all

System:
  Host: Empyrrean Kernel: 5.8.0-33-generic x86_64 bits: 64 compiler: N/A 
  Desktop: Cinnamon 4.8.4 wm: muffin dm: LightDM 
  Distro: Linux Mint 20.1 Ulyssa base: Ubuntu 20.04 focal 
CPU:
  Topology: 8-Core model: AMD Ryzen 7 2700 bits: 64 type: MT MCP arch: Zen+ 
  rev: 2 L2 cache: 4096 KiB 
  flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm 
  bogomips: 102204 
  Speed: 1457 MHz min/max: 1550/3200 MHz Core speeds (MHz): 1: 1577 2: 1573 
  3: 1374 4: 1372 5: 1374 6: 1372 7: 1455 8: 1546 9: 1574 10: 1573 11: 3975 
  12: 3937 13: 1577 14: 1572 15: 1375 16: 1374 
Graphics:
  Device-1: AMD Vega 10 XL/XT [Radeon RX Vega 56/64] 
  vendor: Acer Incorporated ALI driver: amdgpu v: kernel bus ID: 08:00.0 
  chip ID: 1002:687f 
  Display: x11 server: X.Org 1.20.8 driver: amdgpu,ati 
  unloaded: fbdev,modesetting,vesa resolution: 1920x1080~144Hz 
  OpenGL: renderer: AMD VEGA10 (DRM 3.38.0 5.8.0-33-generic LLVM 11.0.0) 
  v: 4.6 Mesa 21.0.0-devel (git-00c3042 2020-12-23 focal-oibaf-ppa) 
  direct render: Yes

It survived a reboot! I ran the Valley benchmark 3 times through with absolutely no issues.
Now this is with the fixes I detailed in the previous post, so anyone else with these issues will need to do some work to get similar results.

EDIT:
Belay that; another reboot and it's not coming up with full power. This laptop is frustrating on its best day, so this may be just intermittent. Sorry for the bad news, I'll keep you posted if I figure anything else out.

[Larry78723]

Aye, Aye, Sir

[N7_X]

Alright, I'm confused, but think I have more information...
I haven't touched this since my last post, so I got to start with a fresh look. First bootup was low performance, like last time. I ran update-grub and rebooted which started in high performance. Unfortunately, we're back to the freeze and crash, so it looks like something got changed. Possibly an update?

I'm hesitant to start over again, though I know that worked before, so I'll try running updates and reapplying every step I did before.

Update #1:
Ran all updates, update-grub, rebooted: low power.
Update-grub, reboot: low power.
Reboot, unplugged power cable and plugged back in: high power.
So now I'm going to reapply previous settings, because it's not supposed to need a power state toggle to change that.

Update #2:
This time after reapplying fixes, update-grub, and rebooting, even toggling the power cable state would not give me high performance. I'll probably start over again here pretty soon, but before I do I'll see if there's a difference with AMD official drivers (if I can get those working.)

[N7_X]

Official AMD drivers 20.45 installed just fine on kernel 5.4.0-59, but performance was terrible (open source is definitely best)
So I ended up starting over, as planned:
inxi -CSG -xx

Code: Select all

System:
  Host: Empyrrean Kernel: 5.8.0-34-generic x86_64 bits: 64 compiler: N/A 
  Desktop: Cinnamon 4.8.5 wm: muffin dm: LightDM 
  Distro: Linux Mint 20.1 Ulyssa base: Ubuntu 20.04 focal 
CPU:
  Topology: 8-Core model: AMD Ryzen 7 2700 bits: 64 type: MT MCP arch: Zen+ 
  rev: 2 L2 cache: 4096 KiB 
  flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm 
  bogomips: 102205 
  Speed: 1376 MHz min/max: 1550/3200 MHz Core speeds (MHz): 1: 1376 2: 1373 
  3: 1375 4: 1384 5: 1378 6: 1382 7: 1547 8: 1544 9: 1376 10: 1376 11: 1422 
  12: 1376 13: 1518 14: 1421 15: 1380 16: 1467 
Graphics:
  Device-1: AMD Vega 10 XL/XT [Radeon RX Vega 56/64] 
  vendor: Acer Incorporated ALI driver: amdgpu v: kernel bus ID: 08:00.0 
  chip ID: 1002:687f 
  Display: x11 server: X.Org 1.20.9 driver: amdgpu,ati 
  unloaded: fbdev,modesetting,vesa resolution: 1920x1080~144Hz 
  OpenGL: renderer: AMD VEGA10 (DRM 3.38.0 5.8.0-34-generic LLVM 11.0.0) 
  v: 4.6 Mesa 21.0.0-devel (git-e8f50bd 2021-01-07 focal-oibaf-ppa) 
  direct render: Yes

It's currently working just fine, benchmark went great, so I'm going to try testing it for a little while longer with blender and other stress tests.
Oh, I'll also make sure I'm not updating the kernel in any way until I (hopefully) achieve sustained success.
I'll keep you posted. Thank you!

EDIT:
Ah! So I opened a project in blender, everything loaded in beautifully fast, went to render out, and I get the static screen of doom.
Rebooted, ended up in low performance mode? Toggled power adapter, opened benchmark, graphics are low power, cpu is high power.
Nothing changed between now and then except the static screen of doom. Any ideas? Wondering if I should toy around with fan levels again, but I don't like using a windows utility for that. Also, it's too hack-y for my tastes - it would be better to find and solve the actual root cause here.

Update:
This laptop has several drives, so I save my home folder on a different drive before I clean install. Fortunately, I still have the folder with NBFC compiled, so I was able to test blender with the fans on high speed.
And it crashed with the static screen again. I had the fans on the highest setting, waited until they clearly came up to speed, let the laptop cool down like that, then launched blender and tried to render out a scene (after letting eevee load everything in)
So it looks like temperature is no longer the main problem here... I'm pretty lost from here on out, hopefully someone else is able to suggest something or otherwise pickup where I left off. I'm subscribed to this topic (now) so I should get email notifications if you reply.

Good luck, and thank you!