SD card slot not working on Intel NUC7PJYH

Questions about hardware,drivers and peripherals
Forum rules
Before you post please read how to get help
Post Reply
vic49
Level 1
Level 1
Posts: 4
Joined: Tue Jul 07, 2020 10:33 am

SD card slot not working on Intel NUC7PJYH

Post by vic49 »

Hi. I'm happily running LM20 on an Intel NUC7PJYH. It has an SD card slot, but the slot isn't working. I've tried taking the SD card out and re-inserting it, and tried a couple of different SD cards, both of which I know to be good, but nothing happens. Driver Manager insists that the machine doesn't need any more drivers and that no non-standard drivers are in use. The lspci command shows an SD Host controller as a PCI device. The other PCI devices all work fine. Part of the output from lspci -v is as follows:

Code: Select all

vic@vic-NUC7PJYH:~$ lspci -v

00:1c.0 SD Host controller: Intel Corporation Celeron/Pentium Silver Processor SDA Standard Compliant SD Host Controller (rev 03) (prog-if 01)
	DeviceName: Onboard - Other
	Subsystem: Intel Corporation Celeron/Pentium Silver Processor SDA Standard Compliant SD Host Controller
	Flags: bus master, fast devsel, latency 0, IRQ 39
	Memory at a131c000 (64-bit, non-prefetchable) [size=4K]
	Memory at a131b000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: sdhci-pci
	Kernel modules: sdhci_pci
I'm now out of my depth. Can anyone please advise me on sorting this out? Thanks.
Post Reply

Return to “Hardware Support”