i915 *ERROR* Atomic update failure on pipe A AND snd_pcm_avail()...value...exceptionally large ¿Cause thermald.service?

[Jeronimo17]

I come from here viewtopic.php?f=49&t=340615

The keyboard stops responding and this error appears, it has always been playing in 3D, the mouse and everything else continues to work, only the keyboard is blocked (also the power button, I have to turn off removing the battery + charger).

With pcie_aspm=off it seems that it was holding up without problems until today

Code: Select all

[   10.744215] Bluetooth: RFCOMM ver 1.11
[   14.147864] usb 1-8: USB disconnect, device number 3
[ 4867.814707] nvidia-uvm: Loaded the UVM driver, major device number 509.
[20808.634774] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=2994998 end=2994999) time 182 us, min 1063, max 1079, scanline start 1049, end 1079
[20908.303211] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3009350 end=3009351) time 234 us, min 1063, max 1079, scanline start 1062, end 1098
[21004.325458] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3023177 end=3023178) time 206 us, min 1063, max 1079, scanline start 1060, end 1093
[21004.846221] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3023252 end=3023253) time 207 us, min 1063, max 1079, scanline start 1047, end 1081
[21106.181201] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037844 end=3037845) time 198 us, min 1063, max 1079, scanline start 1055, end 1086
[21106.195045] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037846 end=3037847) time 294 us, min 1063, max 1079, scanline start 1035, end 1078
[21106.271494] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037857 end=3037858) time 243 us, min 1063, max 1079, scanline start 1047, end 1086
[21106.431201] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037880 end=3037881) time 217 us, min 1063, max 1079, scanline start 1048, end 1082
[21106.549267] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037897 end=3037898) time 218 us, min 1063, max 1079, scanline start 1051, end 1085
[21106.577040] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037901 end=3037902) time 245 us, min 1063, max 1079, scanline start 1047, end 1085
[21106.604800] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037905 end=3037906) time 228 us, min 1063, max 1079, scanline start 1049, end 1084
[21106.632595] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037909 end=3037910) time 214 us, min 1063, max 1079, scanline start 1052, end 1085
[21106.646490] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037911 end=3037912) time 246 us, min 1063, max 1079, scanline start 1048, end 1086
[21106.660286] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037913 end=3037914) time 124 us, min 1063, max 1079, scanline start 1055, end 1080
[21106.681208] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037916 end=3037917) time 165 us, min 1063, max 1079, scanline start 1061, end 1086
[21106.695091] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037918 end=3037919) time 187 us, min 1063, max 1079, scanline start 1058, end 1087
[21106.708959] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037920 end=3037921) time 246 us, min 1063, max 1079, scanline start 1042, end 1079
[21106.736778] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037924 end=3037925) time 207 us, min 1063, max 1079, scanline start 1050, end 1083
[21106.750654] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037926 end=3037927) time 213 us, min 1063, max 1079, scanline start 1052, end 1085
[21106.785378] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037931 end=3037932) time 193 us, min 1063, max 1079, scanline start 1056, end 1085
[21106.813119] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037935 end=3037936) time 255 us, min 1063, max 1079, scanline start 1043, end 1080
[21106.827048] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037937 end=3037938) time 247 us, min 1063, max 1079, scanline start 1048, end 1087
[21106.840958] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037939 end=3037940) time 243 us, min 1063, max 1079, scanline start 1045, end 1085
[21106.854829] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037941 end=3037942) time 206 us, min 1063, max 1079, scanline start 1053, end 1085
[21106.972858] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037958 end=3037959) time 210 us, min 1063, max 1079, scanline start 1050, end 1085
[21107.007588] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037963 end=3037964) time 247 us, min 1063, max 1079, scanline start 1044, end 1084
[21109.945119] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3038386 end=3038387) time 153 us, min 1063, max 1079, scanline start 1059, end 1084
[21144.931898] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3043424 end=3043425) time 344 us, min 1063, max 1079, scanline start 1035, end 1086
[21152.674960] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3044539 end=3044540) time 165 us, min 1063, max 1079, scanline start 1058, end 1084
[21152.688864] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3044541 end=3044542) time 196 us, min 1063, max 1079, scanline start 1049, end 1081
[21152.716637] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3044545 end=3044546) time 172 us, min 1063, max 1079, scanline start 1050, end 1081
[21153.494439] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3044657 end=3044658) time 225 us, min 1063, max 1079, scanline start 1048, end 1079
[21153.529116] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3044662 end=3044663) time 135 us, min 1063, max 1079, scanline start 1052, end 1079
[21153.556897] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3044666 end=3044667) time 284 us, min 1063, max 1079, scanline start 1033, end 1081
[21153.709712] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3044688 end=3044689) time 209 us, min 1063, max 1079, scanline start 1047, end 1082
[21177.015752] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3048044 end=3048045) time 237 us, min 1063, max 1079, scanline start 1062, end 1101
[21183.751854] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3049014 end=3049015) time 207 us, min 1063, max 1079, scanline start 1051, end 1084
[21192.772831] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3050313 end=3050314) time 192 us, min 1063, max 1079, scanline start 1056, end 1087
[21204.849409] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3052052 end=3052053) time 183 us, min 1063, max 1079, scanline start 1060, end 1090
[21234.717921] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3056353 end=3056354) time 225 us, min 1063, max 1079, scanline start 1052, end 1083
[21234.731799] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3056355 end=3056356) time 161 us, min 1063, max 1079, scanline start 1058, end 1080
[21234.856820] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3056373 end=3056374) time 204 us, min 1063, max 1079, scanline start 1049, end 1086
[21309.323270] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3067096 end=3067097) time 194 us, min 1063, max 1079, scanline start 1052, end 1085
jeronimo17@jeronimo17-GIGABYTE-AORUS-7-KB ~ $ 

Historical record

Code: Select all

jeronimo17@jeronimo17-GIGABYTE-AORUS-7-KB / $ journalctl | grep -F "*ERROR* Atomic update failure on pipe A"
ene 05 16:35:28 jeronimo17-GIGABYTE-AORUS-7-KB kernel: [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=278726 end=278727) time 295 us, min 1063, max 1079, scanline start 1047, end 1096
ene 07 02:05:52 jeronimo17-GIGABYTE-AORUS-7-KB kernel: [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=234577 end=234578) time 303 us, min 1063, max 1079, scanline start 1031, end 1082
ene 07 17:12:40 jeronimo17-GIGABYTE-AORUS-7-KB kernel: [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=64480 end=64481) time 253 us, min 1063, max 1079, scanline start 1053, end 1096
ene 07 17:56:51 jeronimo17-GIGABYTE-AORUS-7-KB kernel: [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=446231 end=446232) time 236 us, min 1063, max 1079, scanline start 1051, end 1090
ene 07 18:50:12 jeronimo17-GIGABYTE-AORUS-7-KB kernel: [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=81958 end=81959) time 132 us, min 1063, max 1079, scanline start 1059, end 1081
ene 07 18:50:40 jeronimo17-GIGABYTE-AORUS-7-KB kernel: [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=86009 end=86010) time 241 us, min 1063, max 1079, scanline start 1048, end 1086
ene 07 18:51:09 jeronimo17-GIGABYTE-AORUS-7-KB kernel: [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=90149 end=90150) time 266 us, min 1063, max 1079, scanline start 1043, end 1088
ene 07 18:51:09 jeronimo17-GIGABYTE-AORUS-7-KB kernel: [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=90152 end=90153) time 298 us, min 1063, max 1079, scanline start 1039, end 1089
ene 13 01:06:23 jeronimo17-GIGABYTE-AORUS-7-KB kernel: [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=58693 end=58694) time 117 us, min 1063, max 1079, scanline start 1058, end 1081
ene 13 19:51:07 jeronimo17-GIGABYTE-AORUS-7-KB kernel: [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=31836 end=31837) time 186 us, min 1063, max 1079, scanline start 1052, end 1083
ene 17 15:31:00 jeronimo17-GIGABYTE-AORUS-7-KB kernel: [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=241979 end=241980) time 328 us, min 1063, max 1079, scanline start 1037, end 1091
ene 19 23:26:32 jeronimo17-GIGABYTE-AORUS-7-KB kernel: [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=1960692 end=1960693) time 351 us, min 1063, max 1079, scanline start 1059, end 1115
ene 20 15:52:58 jeronimo17-GIGABYTE-AORUS-7-KB kernel: [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=222872 end=222873) time 175 us, min 1063, max 1079, scanline start 1052, end 1081
ene 20 16:03:43 jeronimo17-GIGABYTE-AORUS-7-KB kernel: [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=315770 end=315771) time 222 us, min 1063, max 1079, scanline start 1062, end 1099
ene 20 16:14:51 jeronimo17-GIGABYTE-AORUS-7-KB kernel: [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=73158 end=73159) time 163 us, min 1063, max 1079, scanline start 1054, end 1081
ene 22 14:50:42 jeronimo17-GIGABYTE-AORUS-7-KB kernel: [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=180658 end=180659) time 294 us, min 1063, max 1079, scanline start 1059, end 1108
ene 22 16:59:40 jeronimo17-GIGABYTE-AORUS-7-KB kernel: [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=461334 end=461335) time 108 us, min 1063, max 1079, scanline start 1062, end 1080
ene 22 18:49:34 jeronimo17-GIGABYTE-AORUS-7-KB kernel: [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=1410987 end=1410988) time 195 us, min 1063, max 1079, scanline start 1047, end 1079
ene 22 19:24:57 jeronimo17-GIGABYTE-AORUS-7-KB kernel: [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=1716672 end=1716673) time 222 us, min 1063, max 1079, scanline start 1060, end 1096
ene 22 19:50:12 jeronimo17-GIGABYTE-AORUS-7-KB kernel: [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=31862 end=31863) time 271 us, min 1063, max 1079, scanline start 1042, end 1087
ene 22 19:50:12 jeronimo17-GIGABYTE-AORUS-7-KB kernel: [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=31864 end=31865) time 333 us, min 1063, max 1079, scanline start 1050, end 1105
ene 22 21:23:23 jeronimo17-GIGABYTE-AORUS-7-KB kernel: [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=21316 end=21317) time 363 us, min 1063, max 1079, scanline start 1044, end 1102
ene 22 21:23:26 jeronimo17-GIGABYTE-AORUS-7-KB kernel: [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=21841 end=21842) time 191 us, min 1063, max 1079, scanline start 1061, end 1093
ene 22 21:23:29 jeronimo17-GIGABYTE-AORUS-7-KB kernel: [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=22176 end=22177) time 330 us, min 1063, max 1079, scanline start 1040, end 1093
ene 23 14:33:30 jeronimo17-GIGABYTE-AORUS-7-KB kernel: [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=90573 end=90574) time 168 us, min 1063, max 1079, scanline start 1051, end 1079
ene 24 14:02:08 jeronimo17-GIGABYTE-AORUS-7-KB kernel: [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=631498 end=631499) time 180 us, min 1063, max 1079, scanline start 1055, end 1085
ene 26 03:48:20 jeronimo17-GIGABYTE-AORUS-7-KB kernel: [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=103441 end=103442) time 183 us, min 1063, max 1079, scanline start 1052, end 1082
ene 26 14:52:23 jeronimo17-GIGABYTE-AORUS-7-KB kernel: [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=815132 end=815133) time 106 us, min 1063, max 1079, scanline start 1062, end 1080
ene 26 16:14:08 jeronimo17-GIGABYTE-AORUS-7-KB kernel: [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=1521453 end=1521454) time 310 us, min 1063, max 1079, scanline start 1045, end 1097
ene 27 14:20:29 jeronimo17-GIGABYTE-AORUS-7-KB kernel: [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=97974 end=97975) time 155 us, min 1063, max 1079, scanline start 1057, end 1083
ene 27 20:30:32 jeronimo17-GIGABYTE-AORUS-7-KB kernel: [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=219529 end=219530) time 178 us, min 1063, max 1079, scanline start 1059, end 1089
ene 29 17:21:27 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=849585 end=849586) time 184 us, min 1063, max 1079, scanline start 1052, end 1081
feb 08 16:40:52 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=144251 end=144252) time 282 us, min 1063, max 1079, scanline start 1034, end 1081
feb 12 16:24:50 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=46799 end=46800) time 221 us, min 1063, max 1079, scanline start 1061, end 1098
feb 12 16:24:50 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=46804 end=46805) time 171 us, min 1063, max 1079, scanline start 1060, end 1088
feb 12 19:41:22 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=116867 end=116868) time 465 us, min 1063, max 1079, scanline start 1016, end 1090
feb 17 14:13:54 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=144935 end=144936) time 453 us, min 1063, max 1079, scanline start 1053, end 1124
feb 23 15:46:53 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=2194340 end=2194341) time 162 us, min 1063, max 1079, scanline start 1059, end 1086
feb 27 16:44:44 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=2368617 end=2368618) time 190 us, min 1063, max 1079, scanline start 1049, end 1079
mar 06 18:02:16 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=999762 end=999763) time 233 us, min 1063, max 1079, scanline start 1050, end 1088
mar 06 18:02:16 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=999765 end=999766) time 191 us, min 1063, max 1079, scanline start 1060, end 1091
mar 06 21:44:02 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=596365 end=596366) time 174 us, min 1063, max 1079, scanline start 1062, end 1091
mar 07 19:18:42 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=2994998 end=2994999) time 182 us, min 1063, max 1079, scanline start 1049, end 1079
mar 07 19:20:22 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3009350 end=3009351) time 234 us, min 1063, max 1079, scanline start 1062, end 1098
mar 07 19:21:58 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3023177 end=3023178) time 206 us, min 1063, max 1079, scanline start 1060, end 1093
mar 07 19:21:58 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3023252 end=3023253) time 207 us, min 1063, max 1079, scanline start 1047, end 1081
mar 07 19:23:40 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037844 end=3037845) time 198 us, min 1063, max 1079, scanline start 1055, end 1086
mar 07 19:23:40 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037846 end=3037847) time 294 us, min 1063, max 1079, scanline start 1035, end 1078
mar 07 19:23:40 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037857 end=3037858) time 243 us, min 1063, max 1079, scanline start 1047, end 1086
mar 07 19:23:40 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037880 end=3037881) time 217 us, min 1063, max 1079, scanline start 1048, end 1082
mar 07 19:23:40 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037897 end=3037898) time 218 us, min 1063, max 1079, scanline start 1051, end 1085
mar 07 19:23:40 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037901 end=3037902) time 245 us, min 1063, max 1079, scanline start 1047, end 1085
mar 07 19:23:40 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037905 end=3037906) time 228 us, min 1063, max 1079, scanline start 1049, end 1084
mar 07 19:23:40 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037909 end=3037910) time 214 us, min 1063, max 1079, scanline start 1052, end 1085
mar 07 19:23:40 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037911 end=3037912) time 246 us, min 1063, max 1079, scanline start 1048, end 1086
mar 07 19:23:40 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037913 end=3037914) time 124 us, min 1063, max 1079, scanline start 1055, end 1080
mar 07 19:23:40 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037916 end=3037917) time 165 us, min 1063, max 1079, scanline start 1061, end 1086
mar 07 19:23:40 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037918 end=3037919) time 187 us, min 1063, max 1079, scanline start 1058, end 1087
mar 07 19:23:40 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037920 end=3037921) time 246 us, min 1063, max 1079, scanline start 1042, end 1079
mar 07 19:23:40 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037924 end=3037925) time 207 us, min 1063, max 1079, scanline start 1050, end 1083
mar 07 19:23:40 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037926 end=3037927) time 213 us, min 1063, max 1079, scanline start 1052, end 1085
mar 07 19:23:40 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037931 end=3037932) time 193 us, min 1063, max 1079, scanline start 1056, end 1085
mar 07 19:23:40 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037935 end=3037936) time 255 us, min 1063, max 1079, scanline start 1043, end 1080
mar 07 19:23:40 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037937 end=3037938) time 247 us, min 1063, max 1079, scanline start 1048, end 1087
mar 07 19:23:40 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037939 end=3037940) time 243 us, min 1063, max 1079, scanline start 1045, end 1085
mar 07 19:23:40 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037941 end=3037942) time 206 us, min 1063, max 1079, scanline start 1053, end 1085
mar 07 19:23:41 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037958 end=3037959) time 210 us, min 1063, max 1079, scanline start 1050, end 1085
mar 07 19:23:41 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3037963 end=3037964) time 247 us, min 1063, max 1079, scanline start 1044, end 1084
mar 07 19:23:44 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3038386 end=3038387) time 153 us, min 1063, max 1079, scanline start 1059, end 1084
mar 07 19:24:19 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3043424 end=3043425) time 344 us, min 1063, max 1079, scanline start 1035, end 1086
mar 07 19:24:26 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3044539 end=3044540) time 165 us, min 1063, max 1079, scanline start 1058, end 1084
mar 07 19:24:26 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3044541 end=3044542) time 196 us, min 1063, max 1079, scanline start 1049, end 1081
mar 07 19:24:26 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3044545 end=3044546) time 172 us, min 1063, max 1079, scanline start 1050, end 1081
mar 07 19:24:27 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3044657 end=3044658) time 225 us, min 1063, max 1079, scanline start 1048, end 1079
mar 07 19:24:27 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3044662 end=3044663) time 135 us, min 1063, max 1079, scanline start 1052, end 1079
mar 07 19:24:27 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3044666 end=3044667) time 284 us, min 1063, max 1079, scanline start 1033, end 1081
mar 07 19:24:27 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3044688 end=3044689) time 209 us, min 1063, max 1079, scanline start 1047, end 1082
mar 07 19:24:51 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3048044 end=3048045) time 237 us, min 1063, max 1079, scanline start 1062, end 1101
mar 07 19:24:57 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3049014 end=3049015) time 207 us, min 1063, max 1079, scanline start 1051, end 1084
mar 07 19:25:06 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3050313 end=3050314) time 192 us, min 1063, max 1079, scanline start 1056, end 1087
mar 07 19:25:18 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3052052 end=3052053) time 183 us, min 1063, max 1079, scanline start 1060, end 1090
mar 07 19:25:48 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3056353 end=3056354) time 225 us, min 1063, max 1079, scanline start 1052, end 1083
mar 07 19:25:48 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3056355 end=3056356) time 161 us, min 1063, max 1079, scanline start 1058, end 1080
mar 07 19:25:48 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3056373 end=3056374) time 204 us, min 1063, max 1079, scanline start 1049, end 1086
mar 07 19:27:03 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3067096 end=3067097) time 194 us, min 1063, max 1079, scanline start 1052, end 1085
mar 07 19:27:27 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3070497 end=3070498) time 226 us, min 1063, max 1079, scanline start 1047, end 1078
mar 07 19:27:27 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3070501 end=3070502) time 227 us, min 1063, max 1079, scanline start 1039, end 1085
mar 07 19:27:27 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3070505 end=3070506) time 207 us, min 1063, max 1079, scanline start 1048, end 1081
mar 07 19:27:27 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3070508 end=3070509) time 206 us, min 1063, max 1079, scanline start 1045, end 1084
mar 07 19:27:27 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3070510 end=3070511) time 217 us, min 1063, max 1079, scanline start 1045, end 1085
mar 07 19:27:27 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3070512 end=3070513) time 292 us, min 1063, max 1079, scanline start 1039, end 1085
mar 07 19:27:30 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3070956 end=3070957) time 210 us, min 1063, max 1079, scanline start 1059, end 1097
mar 07 19:27:30 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3070960 end=3070961) time 196 us, min 1063, max 1079, scanline start 1053, end 1085
mar 07 19:27:30 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3070962 end=3070963) time 253 us, min 1063, max 1079, scanline start 1039, end 1085
mar 07 19:27:44 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3072984 end=3072985) time 161 us, min 1063, max 1079, scanline start 1062, end 1088
mar 07 19:27:53 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3074287 end=3074288) time 140 us, min 1063, max 1079, scanline start 1056, end 1084

Code: Select all

inxi -Fxzn
System:    Kernel: 5.4.0-62-generic x86_64 bits: 64 compiler: gcc v: 9.3.0 Desktop: Xfce 4.14.2 
           Distro: Linux Mint 20.1 Ulyssa base: Ubuntu 20.04 focal 
Machine:   Type: Laptop System: GIGABYTE product: AORUS 7 KB v: N/A serial: <filter> 
           Mobo: GIGABYTE model: AORUS 7 KB serial: <filter> UEFI: INSYDE v: FB06 date: 08/03/2020 
Battery:   ID-1: BAT0 charge: 38.1 Wh condition: 44.5/48.0 Wh (93%) model: Notebook BAT status: Unknown 
CPU:       Topology: 6-Core model: Intel Core i7-10750H bits: 64 type: MT MCP arch: N/A L2 cache: 12.0 MiB 
           flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 62399 
           Speed: 800 MHz min/max: 800/5000 MHz Core speeds (MHz): 1: 800 2: 800 3: 800 4: 800 5: 800 
           6: 800 7: 800 8: 800 9: 800 10: 800 11: 800 12: 800 
Graphics:  Device-1: Intel UHD Graphics vendor: CLEVO/KAPOK driver: i915 v: kernel bus ID: 00:02.0 
           Device-2: NVIDIA TU106 [GeForce RTX 2060] vendor: CLEVO/KAPOK driver: nvidia v: 450.102.04 
           bus ID: 01:00.0 
           Display: x11 server: X.Org 1.20.9 driver: modesetting,nvidia unloaded: fbdev,nouveau,vesa 
           resolution: 1920x1080~144Hz 
           OpenGL: renderer: GeForce RTX 2060/PCIe/SSE2 v: 4.6.0 NVIDIA 450.102.04 direct render: Yes 
Audio:     Device-1: Intel Comet Lake PCH cAVS vendor: CLEVO/KAPOK driver: snd_hda_intel v: kernel 
           bus ID: 00:1f.3 
           Device-2: NVIDIA TU106 High Definition Audio driver: snd_hda_intel v: kernel bus ID: 01:00.1 
           Device-3: GEMBIRD USB2.0 Device type: USB driver: hid-generic,snd-usb-audio,usb-storage,usbhid 
           bus ID: 1-2:9 
           Sound Server: ALSA v: k5.4.0-62-generic 
Network:   Device-1: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel port: 5000 bus ID: 0c:00.0 
           IF: wlp12s0 state: down mac: <filter> 
           Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: CLEVO/KAPOK 
           driver: r8169 v: kernel port: 3000 bus ID: 0d:00.1 
           IF: enp13s0f1 state: up speed: 1000 Mbps duplex: full mac: <filter> 
Drives:    Local Storage: total: 1.12 TiB used: 458.10 GiB (39.9%) 
           ID-1: /dev/nvme0n1 model: SX8200PNP-512GT-S size: 476.94 GiB 
           ID-2: /dev/sda model: Q-720 size: 670.69 GiB 
Partition: ID-1: / size: 144.03 GiB used: 27.82 GiB (19.3%) fs: ext4 dev: /dev/nvme0n1p4 
           ID-2: /home size: 192.12 GiB used: 160.70 GiB (83.6%) fs: ext4 dev: /dev/nvme0n1p5 
           ID-3: swap-1 size: 7.91 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/nvme0n1p6 
Sensors:   System Temperatures: cpu: 36.0 C mobo: N/A gpu: nvidia temp: 39 C 
           Fan Speeds (RPM): cpu: 1525 
Info:      Processes: 313 Uptime: 3h 44m Memory: 15.34 GiB used: 2.65 GiB (17.3%) Init: systemd 
           runlevel: 5 Compilers: gcc: 9.3.0 clang: 10.0.0-4ubuntu1 Shell: bash v: 5.0.17 inxi: 3.0.38

Thanks


I add: I think it has always happened to me with Portal 2 Coop mode (Steam) alone

[Moonstone Man]

I

Code: Select all

inxi -Fxzn
System:    Kernel: 5.4.0-62-generic x86_64 bits: 64 compiler: gcc v: 9.3.0 Desktop: Xfce 4.14.2 
CPU:       Topology: 6-Core model: Intel Core i7-10750H bits: 64 type: MT MCP arch: N/A L2 cache: 12.0 MiB 

Well, what you have there won't help. Go into Update Manager. select Linux Kernels from the View menu, install kernel 5.8 and reboot.

[Jeronimo17]

Sorry, I copied from the other post, I already had 5.8 for a long time

Code: Select all

jeronimo17@jeronimo17-GIGABYTE-AORUS-7-KB ~ $ inxi -Fxzn
System:    Kernel: 5.8.0-43-generic x86_64 bits: 64 compiler: N/A Desktop: Xfce 4.14.2 
           Distro: Linux Mint 20.1 Ulyssa base: Ubuntu 20.04 focal 
Machine:   Type: Laptop System: GIGABYTE product: AORUS 7 KB v: N/A serial: <filter> 
           Mobo: GIGABYTE model: AORUS 7 KB serial: <filter> UEFI: INSYDE v: FB06 date: 08/03/2020 
Battery:   ID-1: BAT0 charge: 44.1 Wh condition: 44.6/48.0 Wh (93%) model: Notebook BAT status: Unknown 
CPU:       Topology: 6-Core model: Intel Core i7-10750H bits: 64 type: MT MCP arch: N/A L2 cache: 12.0 MiB 
           flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 62399 
           Speed: 800 MHz min/max: 800/5000 MHz Core speeds (MHz): 1: 800 2: 800 3: 800 4: 800 5: 800 
           6: 800 7: 800 8: 801 9: 800 10: 800 11: 800 12: 800 
Graphics:  Device-1: Intel UHD Graphics vendor: CLEVO/KAPOK driver: i915 v: kernel bus ID: 00:02.0 
           Device-2: NVIDIA TU106 [GeForce RTX 2060] vendor: CLEVO/KAPOK driver: nvidia v: 460.32.03 
           bus ID: 01:00.0 
           Display: x11 server: X.Org 1.20.9 driver: modesetting,nvidia unloaded: fbdev,nouveau,vesa 
           resolution: 1920x1080~144Hz 
           OpenGL: renderer: GeForce RTX 2060/PCIe/SSE2 v: 4.6.0 NVIDIA 460.32.03 direct render: Yes 
Audio:     Device-1: Intel Comet Lake PCH cAVS vendor: CLEVO/KAPOK driver: snd_hda_intel v: kernel 
           bus ID: 00:1f.3 
           Device-2: NVIDIA TU106 High Definition Audio driver: snd_hda_intel v: kernel bus ID: 01:00.1 
           Sound Server: ALSA v: k5.8.0-43-generic 
Network:   Device-1: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel port: 5000 bus ID: 0c:00.0 
           IF: wlp12s0 state: down mac: <filter> 
           Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: CLEVO/KAPOK 
           driver: r8169 v: kernel port: 3000 bus ID: 0d:00.1 
           IF: enp13s0f1 state: up speed: 1000 Mbps duplex: full mac: <filter> 
Drives:    Local Storage: total: 1.12 TiB used: 518.93 GiB (45.2%) 
           ID-1: /dev/nvme0n1 model: SX8200PNP-512GT-S size: 476.94 GiB 
           ID-2: /dev/sda model: Q-720 size: 670.69 GiB 
Partition: ID-1: / size: 144.03 GiB used: 36.19 GiB (25.1%) fs: ext4 dev: /dev/nvme0n1p4 
           ID-2: /home size: 192.12 GiB used: 128.63 GiB (67.0%) fs: ext4 dev: /dev/nvme0n1p5 
           ID-3: swap-1 size: 7.91 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/nvme0n1p6 
Sensors:   System Temperatures: cpu: 32.0 C mobo: N/A gpu: nvidia temp: 34 C 
           Fan Speeds (RPM): cpu: 0 
Info:      Processes: 324 Uptime: 3m Memory: 15.34 GiB used: 1.43 GiB (9.3%) Init: systemd runlevel: 5 
           Compilers: gcc: 5.3.1 clang: 10.0.0-4ubuntu1 Shell: bash v: 5.0.17 inxi: 3.0.38 

I don't know if it will have something to do with it, but "sensors" also gives me a problem in the PCIs

Code: Select all

jeronimo17@jeronimo17-GIGABYTE-AORUS-7-KB ~ $ sensors
coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +35.0°C  (high = +100.0°C, crit = +100.0°C)
Core 0:        +33.0°C  (high = +100.0°C, crit = +100.0°C)
Core 1:        +35.0°C  (high = +100.0°C, crit = +100.0°C)
Core 2:        +34.0°C  (high = +100.0°C, crit = +100.0°C)
Core 3:        +32.0°C  (high = +100.0°C, crit = +100.0°C)
Core 4:        +32.0°C  (high = +100.0°C, crit = +100.0°C)
Core 5:        +33.0°C  (high = +100.0°C, crit = +100.0°C)

clevo_xsm_wmi-isa-0000
Adapter: ISA adapter
CPU fan:            0 RPM
CPU temperature:  +36.0°C  

BAT0-acpi-0
Adapter: ACPI interface
in0:          14.65 V  
curr1:         0.00 A  

iwlwifi_1-virtual-0
Adapter: Virtual device
temp1:            N/A  

pch_cometlake-virtual-0
Adapter: Virtual device
temp1:        +55.0°C  

nvme-pci-0600
Adapter: PCI adapter
Composite:    +24.9°C  (low  =  -0.1°C, high = +74.8°C)
                       (crit = +79.8°C)
ERROR: Can't get value of subfeature temp3_min: I/O error
ERROR: Can't get value of subfeature temp3_max: I/O error
Sensor 2:     +23.9°C  (low  =  +0.0°C, high =  +0.0°C)
ERROR: Can't get value of subfeature temp4_min: I/O error
ERROR: Can't get value of subfeature temp4_max: I/O error
Sensor 3:     +24.9°C  (low  =  +0.0°C, high =  +0.0°C)
ERROR: Can't get value of subfeature temp5_min: I/O error
ERROR: Can't get value of subfeature temp5_max: I/O error
Sensor 4:     +20.9°C  (low  =  +0.0°C, high =  +0.0°C)
ERROR: Can't get value of subfeature temp6_min: I/O error
ERROR: Can't get value of subfeature temp6_max: I/O error
Sensor 5:     +21.9°C  (low  =  +0.0°C, high =  +0.0°C)
ERROR: Can't get value of subfeature temp7_min: I/O error
ERROR: Can't get value of subfeature temp7_max: I/O error
Sensor 6:     +24.9°C  (low  =  +0.0°C, high =  +0.0°C)

acpitz-acpi-0
Adapter: ACPI interface
temp1:        +36.0°C  (crit = +120.0°C)

[Flemur]

https://www.dedoimedo.com/computers/int ... pdate.html

Under /etc/modprobe.d/, you will need to create a configuration file i915.conf, if it does not already exist. Then, inside this file, you will need to add the following line:

Code: Select all

options i915 enable_psr=0 

[Jeronimo17]

I tried it but it seems silly to me because this already gave me 0

Code: Select all

sudo cat /sys/module/i915/parameters/enable_psr
0 

I'm proving just the opposite

Code: Select all

GRUB_CMDLINE_LINUX_DEFAULT="nvidia-drm.modeset=1 pcie_aspm=off i915.enable_psr=1 i915.disable_power_well=0 i915.enable_fbc=1"

For now without errors, to see if later I try the same online game again, the keyboard crash and the i915 error was just when using ALT + TAB (after many times)

Code: Select all

jeronimo17@jeronimo17-GIGABYTE-AORUS-7-KB ~ $ sudo systool -m i915 -av
Module = "i915"

  Attributes:
    coresize            = "2195456"
    initsize            = "0"
    initstate           = "live"
    refcnt              = "4"
    srcversion          = "B451DDC11D346F62CF3844B"
    taint               = ""
    uevent              = <store method only>

  Parameters:
    disable_display     = "N"
    disable_power_well  = "0"
    dmc_firmware_path   = "(null)"
    edp_vswing          = "0"
    enable_dc           = "-1"
    enable_dp_mst       = "Y"
    enable_dpcd_backlight= "-1"
    enable_fbc          = "1"
    enable_guc          = "0"
    enable_gvt          = "N"
    enable_hangcheck    = "Y"
    enable_ips          = "1"
    enable_psr          = "1"
    error_capture       = "Y"
    fastboot            = "-1"
    force_probe         = ""
    force_reset_modeset_test= "N"
    guc_firmware_path   = "(null)"
    guc_log_level       = "-1"
    huc_firmware_path   = "(null)"
    invert_brightness   = "0"
    load_detect_test    = "N"
    lvds_channel_mode   = "0"
    mmio_debug          = "0"
    modeset             = "-1"
    nuclear_pageflip    = "N"
    panel_use_ssc       = "-1"
    reset               = "3"
    vbt_firmware        = "(null)"
    vbt_sdvo_panel_type = "-1"
    verbose_state_checks= "Y"

  Sections:
    .altinstr_aux       = "0xffffffffc084b25b"
    .altinstr_replacement= "0xffffffffc084b050"
    .altinstructions    = "0xffffffffc08afc24"
    .bss                = "0xffffffffc08c2400"
    .data..cacheline_aligned= "0xffffffffc08c1980"
    .data..read_mostly  = "0xffffffffc08bd700"
    .data.once          = "0xffffffffc08bd694"
    .data               = "0xffffffffc08b2000"
    .exit.text          = "0xffffffffc084b1e3"
    .fixup              = "0xffffffffc084b2a3"
    .gnu.linkonce.this_module= "0xffffffffc08c2080"
    .init.rodata        = "0xffffffffc0913000"
    .init.text          = "0xffffffffc0912000"
    .note.Linux         = "0xffffffffc084c024"
    .note.gnu.build-id  = "0xffffffffc084c000"
    .parainstructions   = "0xffffffffc08ae6c8"
    .ref.data           = "0xffffffffc08be020"
    .rodata             = "0xffffffffc084c0a0"
    .rodata.str1.1      = "0xffffffffc0876aa0"
    .rodata.str1.8      = "0xffffffffc0884a40"
    .smp_locks          = "0xffffffffc08ad6bc"
    .strtab             = "0xffffffffc0942e00"
    .symtab             = "0xffffffffc0914000"
    .text               = "0xffffffffc06f9000"
    .text.unlikely      = "0xffffffffc0842b95"
    __bpf_raw_tp_map    = "0xffffffffc08bd7a0"
    __bug_table         = "0xffffffffc08b9d4c"
    __ex_table          = "0xffffffffc08b06d4"
    __jump_table        = "0xffffffffc08b1000"
    __ksymtab_gpl       = "0xffffffffc084c03c"
    __ksymtab_strings   = "0xffffffffc08b0638"
    __mcount_loc        = "0xffffffffc086e9e0"
    __param             = "0xffffffffc08b0160"
    __tracepoints_ptrs  = "0xffffffffc08b071c"
    __tracepoints_strings= "0xffffffffc08b0800"
    __tracepoints       = "0xffffffffc08bf280"
    __verbose           = "0xffffffffc08bfff0"
    _ftrace_events      = "0xffffffffc08bde60"

[Jeronimo17]

The problem persists today (I thought not), I don't know what else to try, it only happens playing on Linux and very rarely.

I think just when I press the keyboard for a long time a key in the game, the sound is choppy, the internal keyboard stops responding and the off button does not work or even forcing a while, I have to remove the battery and the source to turn it off.

The funny thing is that although the error speaks of the intel, the graphics continue to work perfectly, the keyboard or shutdown button never work again until the forced restart

Note: USB keyboard and mouse works; windows 10 never crashed like this (although i'm rarely on it)

Code: Select all

[ 7431.793713] usb 1-2: USB disconnect, device number 5
[ 7431.794103] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
[ 7431.794279] cp210x 1-2:1.0: device disconnected
[ 8505.750528] device enp13s0f1 entered promiscuous mode
[ 8513.452583] device enp13s0f1 left promiscuous mode
[ 8871.968073] r8169 0000:0d:00.1 enp13s0f1: Link is Down
[ 8882.161117] r8169 0000:0d:00.1 enp13s0f1: Link is Up - 1Gbps/Full - flow control off
[ 9902.259216] usb usb3: root hub lost power or was reset
[ 9902.259217] usb usb4: root hub lost power or was reset
[10680.468867] usb usb3: root hub lost power or was reset
[10680.468868] usb usb4: root hub lost power or was reset
[11882.841989] usb usb3: root hub lost power or was reset
[11882.841990] usb usb4: root hub lost power or was reset
[14051.137389] usb usb3: root hub lost power or was reset
[14051.137390] usb usb4: root hub lost power or was reset
[14418.367767] usb usb3: root hub lost power or was reset
[14418.367768] usb usb4: root hub lost power or was reset
[17216.273479] usb usb3: root hub lost power or was reset
[17216.273480] usb usb4: root hub lost power or was reset
[17533.358165] usb usb3: root hub lost power or was reset
[17533.358167] usb usb4: root hub lost power or was reset
[18734.097317] usb usb3: root hub lost power or was reset
[18734.097319] usb usb4: root hub lost power or was reset
[19115.986662] usb usb3: root hub lost power or was reset
[19115.986663] usb usb4: root hub lost power or was reset
[19130.715244] device enp13s0f1 entered promiscuous mode
[20680.281537] usb usb3: root hub lost power or was reset
[20680.281538] usb usb4: root hub lost power or was reset
[20873.784806] usb usb3: root hub lost power or was reset
[20873.784807] usb usb4: root hub lost power or was reset
[20875.862063] device enp13s0f1 left promiscuous mode
[20910.977394] usb 1-2: new full-speed USB device number 6 using xhci_hcd
[20911.131432] usb 1-2: New USB device found, idVendor=10c4, idProduct=ea60, bcdDevice= 1.00
[20911.131438] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20911.131441] usb 1-2: Product: CP2104 USB to UART Bridge Controller
[20911.131444] usb 1-2: Manufacturer: Silicon Labs
[20911.131447] usb 1-2: SerialNumber: 02017739
[20911.134819] cp210x 1-2:1.0: cp210x converter detected
[20911.136467] usb 1-2: cp210x converter now attached to ttyUSB0
[20998.667094] usb 1-2: USB disconnect, device number 6
[20998.667444] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
[20998.667608] cp210x 1-2:1.0: device disconnected
[23079.552651] usb usb3: root hub lost power or was reset
[23079.552653] usb usb4: root hub lost power or was reset
[24184.709592] usb usb3: root hub lost power or was reset
[24184.709593] usb usb4: root hub lost power or was reset
[25385.449641] usb usb3: root hub lost power or was reset
[25385.449642] usb usb4: root hub lost power or was reset
[26598.386448] usb usb3: root hub lost power or was reset
[26598.386449] usb usb4: root hub lost power or was reset
[26684.878169] usb usb3: root hub lost power or was reset
[26684.878170] usb usb4: root hub lost power or was reset
[28633.588767] usb usb3: root hub lost power or was reset
[28633.588769] usb usb4: root hub lost power or was reset
[29827.561768] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3239659 end=3239660) time 328 us, min 1063, max 1079, scanline start 1044, end 1097
[29829.992399] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3240009 end=3240010) time 299 us, min 1063, max 1079, scanline start 1053, end 1101
[29844.936936] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3242161 end=3242162) time 130 us, min 1063, max 1079, scanline start 1062, end 1082
[29853.652329] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3243416 end=3243417) time 127 us, min 1063, max 1079, scanline start 1058, end 1078
[29862.735813] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3244724 end=3244725) time 132 us, min 1063, max 1079, scanline start 1060, end 1082
[29883.986164] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3247784 end=3247785) time 132 us, min 1063, max 1079, scanline start 1061, end 1083
[29893.236347] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3249116 end=3249117) time 144 us, min 1063, max 1079, scanline start 1062, end 1085
[29896.625305] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3249604 end=3249605) time 241 us, min 1063, max 1079, scanline start 1053, end 1090
[29905.701765] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3250911 end=3250912) time 178 us, min 1063, max 1079, scanline start 1054, end 1081
[29906.269563] usb 1-2: new low-speed USB device number 7 using xhci_hcd
[29906.422755] usb 1-2: New USB device found, idVendor=1c4f, idProduct=0002, bcdDevice= 1.10
[29906.422756] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[29906.422757] usb 1-2: Product: USB Keykoard
[29906.422758] usb 1-2: Manufacturer: SIGMACH1P
[29906.426443] input: SIGMACH1P USB Keykoard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:1C4F:0002.0003/input/input31
[29906.485817] hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Keyboard [SIGMACH1P USB Keykoard] on usb-0000:00:14.0-2/input0
[29906.487897] input: SIGMACH1P USB Keykoard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:1C4F:0002.0004/input/input32
[29906.545675] input: SIGMACH1P USB Keykoard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:1C4F:0002.0004/input/input33
[29906.545793] hid-generic 0003:1C4F:0002.0004: input,hidraw3: USB HID v1.10 Device [SIGMACH1P USB Keykoard] on usb-0000:00:14.0-2/input1
[29908.368533] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3251295 end=3251296) time 177 us, min 1063, max 1079, scanline start 1062, end 1089
[29908.868474] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3251367 end=3251368) time 185 us, min 1063, max 1079, scanline start 1050, end 1079
[29909.201871] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3251415 end=3251416) time 200 us, min 1063, max 1079, scanline start 1056, end 1087
[29910.285161] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3251571 end=3251572) time 156 us, min 1063, max 1079, scanline start 1056, end 1080
[29920.202009] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3252999 end=3253000) time 190 us, min 1063, max 1079, scanline start 1054, end 1081
[29926.000728] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3253834 end=3253835) time 167 us, min 1063, max 1079, scanline start 1060, end 1086
[29926.285406] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3253875 end=3253876) time 142 us, min 1063, max 1079, scanline start 1058, end 1080
[29944.154792] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3256265 end=3256266) time 192 us, min 1063, max 1079, scanline start 1053, end 1080
[29948.550738] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3256898 end=3256899) time 171 us, min 1063, max 1079, scanline start 1058, end 1090
[29950.613233] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3257195 end=3257196) time 127 us, min 1063, max 1079, scanline start 1060, end 1085
[29976.165138] usb usb3: root hub lost power or was reset
[29976.165139] usb usb4: root hub lost power or was reset
[29988.537391] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3262656 end=3262657) time 132 us, min 1063, max 1079, scanline start 1057, end 1079
[29991.558275] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3263091 end=3263092) time 125 us, min 1063, max 1079, scanline start 1060, end 1080
[29991.593026] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3263096 end=3263097) time 143 us, min 1063, max 1079, scanline start 1062, end 1084
[30078.177671] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3275564 end=3275565) time 161 us, min 1063, max 1079, scanline start 1054, end 1081
[30130.865971] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3283151 end=3283152) time 142 us, min 1063, max 1079, scanline start 1056, end 1078
[30143.657848] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3284993 end=3284994) time 175 us, min 1063, max 1079, scanline start 1055, end 1082
[30147.310659] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3285519 end=3285520) time 149 us, min 1063, max 1079, scanline start 1055, end 1078
[30268.562531] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3302979 end=3302980) time 132 us, min 1063, max 1079, scanline start 1058, end 1079
[30309.243719] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3308837 end=3308838) time 132 us, min 1063, max 1079, scanline start 1059, end 1080
[30410.536954] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3323423 end=3323424) time 161 us, min 1063, max 1079, scanline start 1058, end 1082
[30498.864714] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3336142 end=3336143) time 145 us, min 1063, max 1079, scanline start 1061, end 1084
[30502.517521] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3336668 end=3336669) time 146 us, min 1063, max 1079, scanline start 1057, end 1082
[30507.149524] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3337335 end=3337336) time 126 us, min 1063, max 1079, scanline start 1059, end 1079
[30604.637169] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3351373 end=3351374) time 147 us, min 1063, max 1079, scanline start 1060, end 1084
[30653.110100] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=3358353 end=3358354) time 157 us, min 1063, max 1079, scanline start 1054, end 1078

A permanent error that could be related is this:

Code: Select all

$ sensors
coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +49.0°C  (high = +100.0°C, crit = +100.0°C)
Core 0:        +46.0°C  (high = +100.0°C, crit = +100.0°C)
Core 1:        +48.0°C  (high = +100.0°C, crit = +100.0°C)
Core 2:        +46.0°C  (high = +100.0°C, crit = +100.0°C)
Core 3:        +46.0°C  (high = +100.0°C, crit = +100.0°C)
Core 4:        +46.0°C  (high = +100.0°C, crit = +100.0°C)
Core 5:        +46.0°C  (high = +100.0°C, crit = +100.0°C)

clevo_xsm_wmi-isa-0000
Adapter: ISA adapter
CPU fan:         2047 RPM
CPU temperature:  +50.0°C  

BAT0-acpi-0
Adapter: ACPI interface
in0:          12.33 V  
curr1:         0.00 A  

iwlwifi_1-virtual-0
Adapter: Virtual device
temp1:            N/A  

pch_cometlake-virtual-0
Adapter: Virtual device
temp1:        +66.0°C  

nvme-pci-0600
Adapter: PCI adapter
Composite:    +35.9°C  (low  =  -0.1°C, high = +74.8°C)
                       (crit = +79.8°C)
ERROR: Can't get value of subfeature temp3_min: I/O error
ERROR: Can't get value of subfeature temp3_max: I/O error
Sensor 2:     +35.9°C  (low  =  +0.0°C, high =  +0.0°C)
ERROR: Can't get value of subfeature temp4_min: I/O error
ERROR: Can't get value of subfeature temp4_max: I/O error
Sensor 3:     +38.9°C  (low  =  +0.0°C, high =  +0.0°C)
ERROR: Can't get value of subfeature temp5_min: I/O error
ERROR: Can't get value of subfeature temp5_max: I/O error
Sensor 4:     +35.9°C  (low  =  +0.0°C, high =  +0.0°C)
ERROR: Can't get value of subfeature temp6_min: I/O error
ERROR: Can't get value of subfeature temp6_max: I/O error
Sensor 5:     +35.9°C  (low  =  +0.0°C, high =  +0.0°C)
ERROR: Can't get value of subfeature temp7_min: I/O error
ERROR: Can't get value of subfeature temp7_max: I/O error
Sensor 6:     +32.9°C  (low  =  +0.0°C, high =  +0.0°C)

acpitz-acpi-0
Adapter: ACPI interface
temp1:        +50.0°C  (crit = +120.0°C)

Edit: Seems to have a lot of relationship with intel_idle.max_cstate=1, so far it has not happened

[Jeronimo17]

For now with this configuration I have not had any crash GRUB_CMDLINE_LINUX_DEFAULT="nvidia-drm.modeset=1 pcie_aspm=off intel_idle.max_cstate=1"

But this appears in dmesg, I think that since I have put this configuration, now I have a usb speaker connected and the cut in the music is noticeable at the time of each message appearing

Code: Select all

[ 9745.217083] usb usb3: root hub lost power or was reset
[ 9745.217084] usb usb4: root hub lost power or was reset
[ 9762.569769] usb usb3: root hub lost power or was reset
[ 9762.569770] usb usb4: root hub lost power or was reset
[ 9779.909454] usb usb3: root hub lost power or was reset
[ 9779.909455] usb usb4: root hub lost power or was reset
[ 9797.258323] usb usb3: root hub lost power or was reset
[ 9797.258325] usb usb4: root hub lost power or was reset
[ 9814.602590] usb usb3: root hub lost power or was reset
[ 9814.602592] usb usb4: root hub lost power or was reset
[ 9831.530124] usb usb3: root hub lost power or was reset
[ 9831.530126] usb usb4: root hub lost power or was reset
[ 9848.773693] usb usb3: root hub lost power or was reset
[ 9848.773694] usb usb4: root hub lost power or was reset
[ 9866.084007] usb usb3: root hub lost power or was reset
[ 9866.084008] usb usb4: root hub lost power or was reset
[ 9883.434520] usb usb3: root hub lost power or was reset
[ 9883.434522] usb usb4: root hub lost power or was reset
[ 9900.802671] usb usb3: root hub lost power or was reset
[ 9900.802673] usb usb4: root hub lost power or was reset
[ 9918.146695] usb usb3: root hub lost power or was reset
[ 9918.146696] usb usb4: root hub lost power or was reset
[ 9935.432450] usb usb3: root hub lost power or was reset
[ 9935.432451] usb usb4: root hub lost power or was reset
[ 9952.771774] usb usb3: root hub lost power or was reset
[ 9952.771777] usb usb4: root hub lost power or was reset
[ 9970.121044] usb usb3: root hub lost power or was reset
[ 9970.121045] usb usb4: root hub lost power or was reset
[ 9987.489963] usb usb3: root hub lost power or was reset
[ 9987.489964] usb usb4: root hub lost power or was reset
[10004.870942] usb usb3: root hub lost power or was reset
[10004.870943] usb usb4: root hub lost power or was reset
[10022.184433] usb usb3: root hub lost power or was reset
[10022.184434] usb usb4: root hub lost power or was reset
[10039.467808] usb usb3: root hub lost power or was reset
[10039.467810] usb usb4: root hub lost power or was reset
[10056.845077] usb usb3: root hub lost power or was reset
[10056.845079] usb usb4: root hub lost power or was reset
[10074.182284] usb usb3: root hub lost power or was reset
[10074.182286] usb usb4: root hub lost power or was reset
[10091.559666] usb usb3: root hub lost power or was reset
[10091.559668] usb usb4: root hub lost power or was reset
[10108.905634] usb usb3: root hub lost power or was reset
[10108.905635] usb usb4: root hub lost power or was reset
[10126.314955] usb usb3: root hub lost power or was reset
[10126.314957] usb usb4: root hub lost power or was reset
[10143.682031] usb usb3: root hub lost power or was reset
[10143.682032] usb usb4: root hub lost power or was reset
[10161.058984] usb usb3: root hub lost power or was reset
[10161.058986] usb usb4: root hub lost power or was reset
[10178.435299] usb usb3: root hub lost power or was reset
[10178.435300] usb usb4: root hub lost power or was reset
[10195.812223] usb usb3: root hub lost power or was reset
[10195.812224] usb usb4: root hub lost power or was reset
[10213.151167] usb usb3: root hub lost power or was reset
[10213.151168] usb usb4: root hub lost power or was reset
[10230.499614] usb usb3: root hub lost power or was reset
[10230.499615] usb usb4: root hub lost power or was reset
[10230.655454] usb usb3: root hub lost power or was reset
[10230.655456] usb usb4: root hub lost power or was reset
[10247.935927] usb usb3: root hub lost power or was reset
[10247.935928] usb usb4: root hub lost power or was reset
[10265.281596] usb usb3: root hub lost power or was reset
[10265.281597] usb usb4: root hub lost power or was reset
[10266.707280] usb usb3: root hub lost power or was reset
[10266.707282] usb usb4: root hub lost power or was reset
[10282.816698] usb usb3: root hub lost power or was reset
[10282.816700] usb usb4: root hub lost power or was reset
[10282.975189] usb usb3: root hub lost power or was reset
[10282.975190] usb usb4: root hub lost power or was reset
[10284.227183] usb usb3: root hub lost power or was reset
[10284.227184] usb usb4: root hub lost power or was reset
[10284.383154] usb usb3: root hub lost power or was reset
[10284.383158] usb usb4: root hub lost power or was reset
[10285.523046] usb usb3: root hub lost power or was reset
[10285.523047] usb usb4: root hub lost power or was reset
[10315.425494] usb usb3: root hub lost power or was reset
[10315.425496] usb usb4: root hub lost power or was reset
[10332.768251] usb usb3: root hub lost power or was reset
[10332.768252] usb usb4: root hub lost power or was reset
[10332.926941] usb usb3: root hub lost power or was reset
[10332.926942] usb usb4: root hub lost power or was reset
[10334.178923] usb usb3: root hub lost power or was reset
[10334.178924] usb usb4: root hub lost power or was reset
[10335.482943] usb usb3: root hub lost power or was reset
[10335.482947] usb usb4: root hub lost power or was reset
[10335.642937] usb usb3: root hub lost power or was reset
[10335.642941] usb usb4: root hub lost power or was reset
[10365.375316] usb usb3: root hub lost power or was reset
[10365.375317] usb usb4: root hub lost power or was reset
[10382.719614] usb usb3: root hub lost power or was reset
[10382.719615] usb usb4: root hub lost power or was reset
[10400.064692] usb usb3: root hub lost power or was reset
[10400.064693] usb usb4: root hub lost power or was reset
[10400.226601] usb usb3: root hub lost power or was reset
[10400.226602] usb usb4: root hub lost power or was reset
[10401.478592] usb usb3: root hub lost power or was reset
[10401.478593] usb usb4: root hub lost power or was reset
[10402.782575] usb usb3: root hub lost power or was reset
[10402.782576] usb usb4: root hub lost power or was reset
[10402.938583] usb usb3: root hub lost power or was reset
[10402.938586] usb usb4: root hub lost power or was reset
[10404.078595] usb usb3: root hub lost power or was reset
[10404.078596] usb usb4: root hub lost power or was reset
[10404.234606] usb usb3: root hub lost power or was reset
[10404.234607] usb usb4: root hub lost power or was reset
[10416.992900] usb usb3: root hub lost power or was reset
[10416.992901] usb usb4: root hub lost power or was reset
[10417.150513] usb usb3: root hub lost power or was reset
[10417.150517] usb usb4: root hub lost power or was reset
[10418.406514] usb usb3: root hub lost power or was reset
[10418.406515] usb usb4: root hub lost power or was reset
[10418.562464] usb usb3: root hub lost power or was reset
[10418.562468] usb usb4: root hub lost power or was reset
[10419.702496] usb usb3: root hub lost power or was reset
[10419.702497] usb usb4: root hub lost power or was reset
[10419.862509] usb usb3: root hub lost power or was reset
[10419.862512] usb usb4: root hub lost power or was reset
[10421.002486] usb usb3: root hub lost power or was reset
[10421.002487] usb usb4: root hub lost power or was reset
[10422.306515] usb usb3: root hub lost power or was reset
[10422.306516] usb usb4: root hub lost power or was reset
[10434.016974] usb usb3: root hub lost power or was reset
[10434.016975] usb usb4: root hub lost power or was reset
[10451.364336] usb usb3: root hub lost power or was reset
[10451.364337] usb usb4: root hub lost power or was reset
[10468.704736] usb usb3: root hub lost power or was reset
[10468.704737] usb usb4: root hub lost power or was reset
[10468.862235] usb usb3: root hub lost power or was reset
[10468.862239] usb usb4: root hub lost power or was reset
[10470.118278] usb usb3: root hub lost power or was reset
[10470.118282] usb usb4: root hub lost power or was reset
[10486.308304] usb usb3: root hub lost power or was reset
[10486.308305] usb usb4: root hub lost power or was reset
[10486.470141] usb usb3: root hub lost power or was reset
[10486.470145] usb usb4: root hub lost power or was reset
[10487.726179] usb usb3: root hub lost power or was reset
[10487.726183] usb usb4: root hub lost power or was reset
[10487.886179] usb usb3: root hub lost power or was reset
[10487.886183] usb usb4: root hub lost power or was reset
[10518.883615] usb usb3: root hub lost power or was reset
[10518.883616] usb usb4: root hub lost power or was reset
[10519.045963] usb usb3: root hub lost power or was reset
[10519.045967] usb usb4: root hub lost power or was reset
[10520.302005] usb usb3: root hub lost power or was reset
[10520.302009] usb usb4: root hub lost power or was reset
[10536.447912] usb usb3: root hub lost power or was reset
[10536.447913] usb usb4: root hub lost power or was reset
[10536.617888] usb usb3: root hub lost power or was reset
[10536.617891] usb usb4: root hub lost power or was reset
[10537.877927] usb usb3: root hub lost power or was reset
[10537.877928] usb usb4: root hub lost power or was reset
[10554.020113] usb usb3: root hub lost power or was reset
[10554.020114] usb usb4: root hub lost power or was reset
[10571.396602] usb usb3: root hub lost power or was reset
[10571.396603] usb usb4: root hub lost power or was reset
[10588.768443] usb usb3: root hub lost power or was reset
[10588.768444] usb usb4: root hub lost power or was reset
[10588.925621] usb usb3: root hub lost power or was reset
[10588.925625] usb usb4: root hub lost power or was reset
[10590.181645] usb usb3: root hub lost power or was reset
[10590.181646] usb usb4: root hub lost power or was reset
[10606.307474] usb usb3: root hub lost power or was reset
[10606.307475] usb usb4: root hub lost power or was reset
[10623.677980] usb usb3: root hub lost power or was reset
[10623.677982] usb usb4: root hub lost power or was reset
[10641.023382] usb usb3: root hub lost power or was reset
[10641.023383] usb usb4: root hub lost power or was reset
[10641.181595] usb usb3: root hub lost power or was reset
[10641.181596] usb usb4: root hub lost power or was reset
[10642.437415] usb usb3: root hub lost power or was reset
[10642.437419] usb usb4: root hub lost power or was reset
[10642.597369] usb usb3: root hub lost power or was reset
[10642.597370] usb usb4: root hub lost power or was reset
[10643.733376] usb usb3: root hub lost power or was reset
[10643.733377] usb usb4: root hub lost power or was reset
[10643.893352] usb usb3: root hub lost power or was reset
[10643.893353] usb usb4: root hub lost power or was reset
[10673.662992] usb usb3: root hub lost power or was reset
[10673.662993] usb usb4: root hub lost power or was reset
[10673.821177] usb usb3: root hub lost power or was reset
[10673.821180] usb usb4: root hub lost power or was reset
[10675.077242] usb usb3: root hub lost power or was reset
[10675.077246] usb usb4: root hub lost power or was reset
[10691.196053] usb usb3: root hub lost power or was reset
[10691.196054] usb usb4: root hub lost power or was reset
[10708.544867] usb usb3: root hub lost power or was reset
[10708.544868] usb usb4: root hub lost power or was reset
[10725.919550] usb usb3: root hub lost power or was reset
[10725.919551] usb usb4: root hub lost power or was reset
[10743.265328] usb usb3: root hub lost power or was reset
[10743.265330] usb usb4: root hub lost power or was reset
[10760.610380] usb usb3: root hub lost power or was reset
[10760.610381] usb usb4: root hub lost power or was reset
[10760.768777] usb usb3: root hub lost power or was reset
[10760.768781] usb usb4: root hub lost power or was reset
[10778.079257] usb usb3: root hub lost power or was reset
[10778.079258] usb usb4: root hub lost power or was reset

I think everything is related, it seems to me that one of the USB Type C has to do with graphics

Thanks


I edit to add things:
That of the usb error only appears with the configuration of the graphics in prime-select on-demand, In intel only or nvidia only mode it never happens.
I tried all the CS states and the one that seemed most stable is intel_idle.max_cstate = 6 (less USB errors).
In native linux games, the gamma control only works for me in on-demand mode ?¿?¿ (I run with __GLX_VENDOR_LIBRARY_NAME=nvidia __NV_PRIME_RENDER_OFFLOAD=1 to use nvidia in on-demand mode )

Code: Select all

$ sensors
iwlwifi_1-virtual-0
Adapter: Virtual device
temp1:            N/A  

pch_cometlake-virtual-0
Adapter: Virtual device
temp1:        +62.0°C  

nvme-pci-0600
Adapter: PCI adapter
Composite:    +33.9°C  (low  =  -0.1°C, high = +74.8°C)
                       (crit = +79.8°C)
ERROR: Can't get value of subfeature temp3_min: I/O error
ERROR: Can't get value of subfeature temp3_max: I/O error
Sensor 2:     +33.9°C  (low  =  +0.0°C, high =  +0.0°C)
ERROR: Can't get value of subfeature temp4_min: I/O error
ERROR: Can't get value of subfeature temp4_max: I/O error
Sensor 3:     +37.9°C  (low  =  +0.0°C, high =  +0.0°C)
ERROR: Can't get value of subfeature temp5_min: I/O error
ERROR: Can't get value of subfeature temp5_max: I/O error
Sensor 4:     +33.9°C  (low  =  +0.0°C, high =  +0.0°C)
ERROR: Can't get value of subfeature temp6_min: I/O error
ERROR: Can't get value of subfeature temp6_max: I/O error
Sensor 5:     +33.9°C  (low  =  +0.0°C, high =  +0.0°C)
ERROR: Can't get value of subfeature temp7_min: I/O error
ERROR: Can't get value of subfeature temp7_max: I/O error
Sensor 6:     +31.9°C  (low  =  +0.0°C, high =  +0.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +44.0°C  (high = +100.0°C, crit = +100.0°C)
Core 0:        +41.0°C  (high = +100.0°C, crit = +100.0°C)
Core 1:        +42.0°C  (high = +100.0°C, crit = +100.0°C)
Core 2:        +41.0°C  (high = +100.0°C, crit = +100.0°C)
Core 3:        +40.0°C  (high = +100.0°C, crit = +100.0°C)
Core 4:        +39.0°C  (high = +100.0°C, crit = +100.0°C)
Core 5:        +41.0°C  (high = +100.0°C, crit = +100.0°C)

clevo_xsm_wmi-isa-0000
Adapter: ISA adapter
CPU fan:         2041 RPM
CPU temperature:  +44.0°C  

acpitz-acpi-0
Adapter: ACPI interface
temp1:        +44.0°C  (crit = +120.0°C)

Edit2:
Sometimes it starts up with sound problems like mpv and browser choppy sound and video

[ 7.405047] snd_hda_intel 0000:00:1f.3: No response from codec, disabling MSI: last cmd=0x0093603f
[ 8.413138] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x0093603f

Code: Select all

[    0.366582] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.366582] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.368929] clocksource: Switched to clocksource tsc-early
[    0.381473] VFS: Disk quotas dquot_6.6.0
[    0.381490] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.381581] AppArmor: AppArmor Filesystem Enabled
[    0.381604] pnp: PnP ACPI init
[    0.381724] system 00:00: [mem 0x40000000-0x403fffff] could not be reserved
[    0.381730] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.382010] system 00:01: [io  0x1800-0x18fe] has been reserved
[    0.382013] system 00:01: [mem 0xfd000000-0xfd69ffff] has been reserved
[    0.382015] system 00:01: [mem 0xfd6c0000-0xfd6cffff] has been reserved
[    0.382018] system 00:01: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    0.382020] system 00:01: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.382022] system 00:01: [mem 0xfe200000-0xfe7fffff] has been reserved
[    0.382024] system 00:01: [mem 0xff000000-0xffffffff] could not be reserved
[    0.382029] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.382387] system 00:02: [io  0x2000-0x20fe] has been reserved
[    0.382391] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.382490] pnp 00:03: disabling [io  0x3322-0x3323] because it overlaps 0000:00:1d.6 BAR 13 [io  0x3000-0x3fff]
[    0.382518] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.382569] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.382674] system 00:05: [io  0x1854-0x1857] has been reserved
[    0.382679] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.382702] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.382726] pnp 00:07: Plug and Play ACPI device, IDs ETD0463 PNP0f13 (active)
[    0.383386] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.383390] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.383392] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.383394] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[    0.383396] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.383399] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.383401] system 00:08: [mem 0xfed45000-0xfed8ffff] could not be reserved
[    0.383403] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.383408] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.383657] system 00:09: [mem 0xfe038000-0xfe038fff] has been reserved
[    0.383662] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.383935] pnp: PnP ACPI: found 10 devices
[    0.389513] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.389566] NET: Registered protocol family 2
[    0.389734] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.389815] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.389990] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.390066] TCP: Hash tables configured (established 131072 bind 65536)
[    0.390144] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.390191] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.390252] NET: Registered protocol family 1
[    0.390259] NET: Registered protocol family 44
[    0.390263] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.390267] pci 0000:0d:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    0.390279] pci 0000:00:15.0: BAR 0: assigned [mem 0x9d800000-0x9d800fff 64bit]
[    0.390337] pci 0000:00:15.1: BAR 0: assigned [mem 0x9d801000-0x9d801fff 64bit]
[    0.390391] pci 0000:01:00.0: BAR 6: assigned [mem 0xc6000000-0xc607ffff pref]
[    0.390394] pci 0000:00:01.0: PCI bridge to [bus 01-05]
[    0.390397] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
[    0.390400] pci 0000:00:01.0:   bridge window [mem 0xc6000000-0xc80fffff]
[    0.390403] pci 0000:00:01.0:   bridge window [mem 0xb0000000-0xc20fffff 64bit pref]
[    0.390408] pci 0000:00:1b.0: PCI bridge to [bus 06]
[    0.390416] pci 0000:00:1b.0:   bridge window [mem 0xc2400000-0xc24fffff]
[    0.390423] pci 0000:00:1d.0: PCI bridge to [bus 07-0b]
[    0.390427] pci 0000:00:1d.0:   bridge window [io  0x4000-0x4fff]
[    0.390432] pci 0000:00:1d.0:   bridge window [mem 0xc5000000-0xc5ffffff]
[    0.390435] pci 0000:00:1d.0:   bridge window [mem 0xc3000000-0xc3ffffff 64bit pref]
[    0.390441] pci 0000:00:1d.5: PCI bridge to [bus 0c]
[    0.390445] pci 0000:00:1d.5:   bridge window [mem 0xc2300000-0xc23fffff]
[    0.390452] pci 0000:0d:00.0: BAR 6: assigned [mem 0xc2210000-0xc221ffff pref]
[    0.390454] pci 0000:00:1d.6: PCI bridge to [bus 0d]
[    0.390457] pci 0000:00:1d.6:   bridge window [io  0x3000-0x3fff]
[    0.390461] pci 0000:00:1d.6:   bridge window [mem 0xc2200000-0xc22fffff]
[    0.390468] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.390470] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.390472] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.390474] pci_bus 0000:00: resource 7 [mem 0x9d800000-0xdfffffff window]
[    0.390476] pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff window]
[    0.390478] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
[    0.390480] pci_bus 0000:01: resource 1 [mem 0xc6000000-0xc80fffff]
[    0.390482] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xc20fffff 64bit pref]
[    0.390484] pci_bus 0000:06: resource 1 [mem 0xc2400000-0xc24fffff]
[    0.390486] pci_bus 0000:07: resource 0 [io  0x4000-0x4fff]
[    0.390488] pci_bus 0000:07: resource 1 [mem 0xc5000000-0xc5ffffff]
[    0.390490] pci_bus 0000:07: resource 2 [mem 0xc3000000-0xc3ffffff 64bit pref]
[    0.390493] pci_bus 0000:0c: resource 1 [mem 0xc2300000-0xc23fffff]
[    0.390495] pci_bus 0000:0d: resource 0 [io  0x3000-0x3fff]
[    0.390496] pci_bus 0000:0d: resource 1 [mem 0xc2200000-0xc22fffff]
[    0.390651] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.392780] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    0.392849] pci 0000:01:00.2: D0 power state depends on 0000:01:00.0
[    0.393187] pci 0000:01:00.3: D0 power state depends on 0000:01:00.0
[    0.393221] PCI: CLS 64 bytes, default 64
[    0.393314] Trying to unpack rootfs image as initramfs...
[    0.588507] Freeing initrd memory: 89892K
[    0.636959] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.636963] software IO TLB: mapped [mem 0x880ec000-0x8c0ec000] (64MB)
[    0.637182] check: Scanning for low memory corruption every 60 seconds
[    0.637577] Initialise system trusted keyrings
[    0.637590] Key type blacklist registered
[    0.637617] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[    0.638748] zbud: loaded
[    0.638970] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.639098] fuse: init (API version 7.31)
[    0.639216] integrity: Platform Keyring initialized
[    0.648126] Key type asymmetric registered
[    0.648128] Asymmetric key parser 'x509' registered
[    0.648135] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.648166] io scheduler mq-deadline registered
[    0.649175] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.649225] efifb: probing for efifb
[    0.649249] efifb: framebuffer at 0xa0000000, using 8100k, total 8100k
[    0.649251] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    0.649252] efifb: scrolling: redraw
[    0.649254] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.649325] Console: switching to colour frame buffer device 240x67
[    0.652915] fb0: EFI VGA frame buffer device
[    0.652936] intel_idle: MWAIT substates: 0x11142120
[    0.653247] Monitor-Mwait will be used to enter C-1 state
[    0.653254] Monitor-Mwait will be used to enter C-2 state
[    0.653260] Monitor-Mwait will be used to enter C-3 state
[    0.653264] ACPI: \_SB_.PR00: Found 3 idle states
[    0.653284] intel_idle: v0.5.1 model 0xA5
[    0.653626] intel_idle: Local APIC timer is reliable in all C-states
[    0.654757] ACPI: AC Adapter [AC] (on-line)
[    0.654835] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.654887] ACPI: Power Button [PWRB]
[    0.654923] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.654967] ACPI: Sleep Button [SLPB]
[    0.655003] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    0.655045] ACPI: Lid Switch [LID0]
[    0.655080] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.655122] ACPI: Power Button [PWRF]
[    0.658747] thermal LNXTHERM:00: registered as thermal_zone0
[    0.658767] ACPI: Thermal Zone [TZ0] (44 C)
[    0.658933] battery: ACPI: Battery Slot [BAT0] (battery absent)
[    0.658965] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.660461] Linux agpgart interface v0.103
[    0.662911] loop: module loaded
[    0.663149] libphy: Fixed MDIO Bus: probed
[    0.663164] tun: Universal TUN/TAP device driver, 1.6
[    0.663199] PPP generic driver version 2.4.2
[    0.663248] VFIO - User Level meta-driver version: 0.3
[    0.663340] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.663362] ehci-pci: EHCI PCI platform driver
[    0.663384] ehci-platform: EHCI generic platform driver
[    0.663408] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.663428] ohci-pci: OHCI PCI platform driver
[    0.663448] ohci-platform: OHCI generic platform driver
[    0.663474] uhci_hcd: USB Universal Host Controller Interface driver
[    0.663528] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.287745] i8042: Detected active multiplexing controller, rev 1.1
[    1.289698] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.289718] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.289763] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.289795] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.289826] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.289992] mousedev: PS/2 mouse device common for all mice
[    1.290188] rtc_cmos 00:04: RTC can wake from S4
[    1.290987] rtc_cmos 00:04: registered as rtc0
[    1.291228] rtc_cmos 00:04: setting system clock to 2021-05-16T18:14:46 UTC (1621188886)
[    1.291287] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.291315] i2c /dev entries driver
[    1.291366] device-mapper: uevent: version 1.0.3
[    1.292299] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
[    1.293226] platform eisa.0: Probing EISA bus 0
[    1.294123] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.295027] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.295922] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.296813] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.297742] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.298627] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.299490] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.300339] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.301189] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.302016] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.302835] platform eisa.0: EISA: Detected 0 cards
[    1.303653] intel_pstate: Intel P-state driver initializing
[    1.305649] intel_pstate: HWP enabled
[    1.306476] ledtrig-cpu: registered to indicate activity on CPUs
[    1.306944] EFI Variables Facility v0.08 2004-May-17
[    1.339228] intel_pmc_core INT33A1:00:  initialized
[    1.339735] drop_monitor: Initializing network drop monitor service
[    1.340270] NET: Registered protocol family 10
[    1.344102] Segment Routing with IPv6
[    1.344550] NET: Registered protocol family 17
[    1.345195] Key type dns_resolver registered
[    1.346441] microcode: sig=0xa0652, pf=0x20, revision=0xe0
[    1.347158] microcode: Microcode Update Driver: v2.2.
[    1.347160] IPI shorthand broadcast: enabled
[    1.348023] sched_clock: Marking stable (1346413274, 743317)->(1352806513, -5649922)
[    1.348536] registered taskstats version 1
[    1.349039] Loading compiled-in X.509 certificates
[    1.350013] Loaded X.509 cert 'Build time autogenerated kernel key: 11b2ac59332c9016669f146f9c6552f77253cce2'
[    1.350764] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[    1.351521] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[    1.351982] zswap: loaded using pool lzo/zbud
[    1.352550] Key type ._fscrypt registered
[    1.353039] Key type .fscrypt registered
[    1.353496] Key type fscrypt-provisioning registered
[    1.355515] Key type encrypted registered
[    1.355950] AppArmor: AppArmor sha1 policy hashing enabled
[    1.358191] integrity: Loading X.509 certificate: UEFI:db
[    1.358920] integrity: Problem loading X.509 certificate -22
[    1.359331] integrity: Error adding keys to platform keyring UEFI:db
[    1.359747] integrity: Loading X.509 certificate: UEFI:db
[    1.360184] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    1.360612] integrity: Loading X.509 certificate: UEFI:db
[    1.361114] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    1.361556] integrity: Loading X.509 certificate: UEFI:db
[    1.362103] integrity: Loaded X.509 cert 'Secure Certificate: 01dcc89619884ca147983429f8a4a1a0'
[    1.364381] ima: No TPM chip found, activating TPM-bypass!
[    1.364842] ima: Allocated hash algorithm: sha1
[    1.365362] ima: No architecture policies found
[    1.365809] evm: Initialising EVM extended attributes:
[    1.366258] evm: security.selinux
[    1.366700] evm: security.SMACK64
[    1.367141] evm: security.SMACK64EXEC
[    1.367566] evm: security.SMACK64TRANSMUTE
[    1.367981] evm: security.SMACK64MMAP
[    1.368398] evm: security.apparmor
[    1.368815] evm: security.ima
[    1.369303] evm: security.capability
[    1.369720] evm: HMAC attrs: 0x1
[    1.370956] PM:   Magic number: 5:274:241
[    1.371406] acpi device:84: hash matches
[    1.371842] memory memory119: hash matches
[    1.372419] RAS: Correctable Errors collector initialized.
[    1.373574] Freeing unused decrypted memory: 2040K
[    1.374326] Freeing unused kernel image (initmem) memory: 2644K
[    1.417117] Write protecting the kernel read-only data: 22528k
[    1.418226] Freeing unused kernel image (text/rodata gap) memory: 2044K
[    1.419036] Freeing unused kernel image (rodata/data gap) memory: 692K
[    1.432503] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.433226] Run /init as init process
[    1.433940]   with arguments:
[    1.433940]     /init
[    1.433941]   with environment:
[    1.433941]     HOME=/
[    1.433942]     TERM=linux
[    1.433943]     BOOT_IMAGE=/boot/vmlinuz-5.8.0-50-generic
[    1.433943]     enable_psr=0
[    1.481215] hid: raw HID events driver (C) Jiri Kosina
[    1.482155] nvidia-gpu 0000:01:00.3: enabling device (0000 -> 0002)
[    1.483238] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.483880] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.485072] rtsx_pci 0000:0d:00.0: enabling device (0000 -> 0002)
[    1.485506] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[    1.486536] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.487479] ahci 0000:00:17.0: version 3.0
[    1.487696] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    1.488464] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    1.488611] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[    1.488643] nvme nvme0: pci function 0000:06:00.0
[    1.490382] i2c i2c-1: 2/2 memory slots populated (from DMI)
[    1.490672] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.491929] i2c i2c-1: Successfully instantiated SPD at 0x50
[    1.492098] usb usb1: Product: xHCI Host Controller
[    1.494176] usb usb1: Manufacturer: Linux 5.8.0-50-generic xhci-hcd
[    1.494820] usb usb1: SerialNumber: 0000:00:14.0
[    1.495548] hub 1-0:1.0: USB hub found
[    1.496071] hub 1-0:1.0: 16 ports detected
[    1.496759] cryptd: max_cpu_qlen set to 1000
[    1.497841] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x10 impl SATA mode
[    1.498549] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.498560] nvme nvme0: 12/0/0 default/read/poll queues
[    1.498614] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part ems deso sadm sds apst 
[    1.499240] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.499951]  nvme0n1: p1 p2 p3 p4 p5 p6
[    1.500479] scsi host0: ahci
[    1.500609] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    1.501327] scsi host1: ahci
[    1.501433] scsi host2: ahci
[    1.501497] scsi host3: ahci
[    1.501560] scsi host4: ahci
[    1.501595] ata1: DUMMY
[    1.502639] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
[    1.502895] ata2: DUMMY
[    1.503775] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.504580] ata3: DUMMY
[    1.505503] usb usb2: Product: xHCI Host Controller
[    1.505503] usb usb2: Manufacturer: Linux 5.8.0-50-generic xhci-hcd
[    1.505504] usb usb2: SerialNumber: 0000:00:14.0
[    1.505608] hub 2-0:1.0: USB hub found
[    1.506177] libphy: r8169: probed
[    1.506308] r8169 0000:0d:00.1 eth0: RTL8411b, 80:fa:5b:85:1c:17, XID 5c8, IRQ 144
[    1.506309] r8169 0000:0d:00.1 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    1.506334] ata4: DUMMY
[    1.506943] hub 2-0:1.0: 8 ports detected
[    1.507004] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
[    1.507336] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    1.507738] ata5: SATA max UDMA/133 abar m2048@0xc259f000 port 0xc259f300 irq 130
[    1.510975] i2c_hid i2c-ELAN0412:00: supply vdd not found, using dummy regulator
[    1.514583] AVX2 version of gcm_enc/dec engaged.
[    1.515353] xhci_hcd 0000:01:00.2: xHCI Host Controller
[    1.515735] AES CTR mode by8 optimization enabled
[    1.516372] xhci_hcd 0000:01:00.2: new USB bus registered, assigned bus number 3
[    1.516748] r8169 0000:0d:00.1 enp13s0f1: renamed from eth0
[    1.518304] i2c_hid i2c-ELAN0412:00: supply vddl not found, using dummy regulator
[    1.519534] xhci_hcd 0000:01:00.2: hcc params 0x0180ff05 hci version 0x110 quirks 0x0000000000000010
[    1.524741] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[    1.525454] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.526168] usb usb3: Product: xHCI Host Controller
[    1.526832] usb usb3: Manufacturer: Linux 5.8.0-50-generic xhci-hcd
[    1.527693] usb usb3: SerialNumber: 0000:01:00.2
[    1.528495] hub 3-0:1.0: USB hub found
[    1.529585] hub 3-0:1.0: 2 ports detected
[    1.530461] xhci_hcd 0000:01:00.2: xHCI Host Controller
[    1.530989] xhci_hcd 0000:01:00.2: new USB bus registered, assigned bus number 4
[    1.531525] xhci_hcd 0000:01:00.2: Host supports USB 3.1 Enhanced SuperSpeed
[    1.532075] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.532616] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
[    1.533169] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.533666] usb usb4: Product: xHCI Host Controller
[    1.534177] usb usb4: Manufacturer: Linux 5.8.0-50-generic xhci-hcd
[    1.534673] usb usb4: SerialNumber: 0000:01:00.2
[    1.535230] hub 4-0:1.0: USB hub found
[    1.535731] hub 4-0:1.0: 4 ports detected
[    1.664532] checking generic (a0000000 7e9000) vs hw (c4000000 1000000)
[    1.664533] checking generic (a0000000 7e9000) vs hw (a0000000 10000000)
[    1.664534] fb0: switching to inteldrmfb from EFI VGA
[    1.664927] tsc: Refined TSC clocksource calibration: 2591.993 MHz
[    1.665859] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255cb052b3b, max_idle_ns: 440795338616 ns
[    1.665904] clocksource: Switched to clocksource tsc
[    1.665907] Console: switching to colour dummy device 80x25
[    1.665948] i915 0000:00:02.0: vgaarb: deactivate vga console
[    1.667364] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.667698] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    1.668151] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    1.692917] intel-lpss 0000:00:15.1: enabling device (0004 -> 0006)
[    1.693114] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    1.824031] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.824370] ata5.00: ATA-9: Q-720, T180731, max UDMA/133
[    1.824380] ata5.00: 1406544048 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.824602] ata5.00: configured for UDMA/133
[    1.824826] scsi 4:0:0:0: Direct-Access     ATA      Q-720            731  PQ: 0 ANSI: 5
[    1.825289] sd 4:0:0:0: Attached scsi generic sg0 type 0
[    1.825336] sd 4:0:0:0: [sda] 1406544048 512-byte logical blocks: (720 GB/671 GiB)
[    1.825363] sd 4:0:0:0: [sda] Write Protect is off
[    1.825369] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.825393] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.833031] usb 1-6: new low-speed USB device number 2 using xhci_hcd
[    1.846912]  sda: sda1 sda2 sda3
[    1.847908] sd 4:0:0:0: [sda] Attached SCSI disk
[    1.853997] input: ELAN0412:00 04F3:3162 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-2/i2c-ELAN0412:00/0018:04F3:3162.0001/input/input11
[    1.854290] input: ELAN0412:00 04F3:3162 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-2/i2c-ELAN0412:00/0018:04F3:3162.0001/input/input13
[    1.854448] hid-generic 0018:04F3:3162.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN0412:00 04F3:3162] on i2c-ELAN0412:00
[    1.984882] usb 1-6: New USB device found, idVendor=ffc0, idProduct=0040, bcdDevice= 0.00
[    1.984896] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.984902] usb 1-6: Product: USB Laser Mouse
[    1.984907] usb 1-6: Manufacturer: Mouse
[    1.993970] input: Mouse USB Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:FFC0:0040.0002/input/input14
[    1.994431] hid-generic 0003:FFC0:0040.0002: input,hidraw1: USB HID v1.11 Mouse [Mouse USB Laser Mouse] on usb-0000:00:14.0-6/input0
[    1.994514] usbcore: registered new interface driver usbhid
[    1.994519] usbhid: USB HID core driver
[    2.113031] usb 1-8: new high-speed USB device number 3 using xhci_hcd
[    2.277976] usb 1-8: New USB device found, idVendor=04f2, idProduct=b685, bcdDevice=54.04
[    2.278000] usb 1-8: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    2.278002] usb 1-8: Product: Chicony USB2.0 Camera
[    2.278003] usb 1-8: Manufacturer: Sonix Technology Co., Ltd.
[    2.348541] psmouse serio2: elantech: assuming hardware version 4 (with firmware version 0x5d4f02)
[    2.404965] usb 1-14: new full-speed USB device number 4 using xhci_hcd
[    2.445692] psmouse serio2: elantech: Synaptics capabilities query result 0x70, 0x17, 0x0d.
[    2.542576] psmouse serio2: elantech: Elan sample query result 04, 0e, 97
[    2.554407] usb 1-14: New USB device found, idVendor=8087, idProduct=0029, bcdDevice= 0.01
[    2.554409] usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.862489] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio2/input/input10
[    3.423463] [drm] Initialized i915 1.6.0 20200515 for 0000:00:02.0 on minor 0
[    3.430075] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.430271] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input17
[    3.435054] fbcon: i915drmfb (fb0) is primary device
[    3.440633] Console: switching to colour frame buffer device 240x67
[    3.453908] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[    3.668946] raid6: avx2x4   gen() 50299 MB/s
[    3.736946] raid6: avx2x4   xor() 22310 MB/s
[    3.804977] raid6: avx2x2   gen() 50930 MB/s
[    3.872977] raid6: avx2x2   xor() 30268 MB/s
[    3.940946] raid6: avx2x1   gen() 43072 MB/s
[    4.008946] raid6: avx2x1   xor() 24470 MB/s
[    4.076949] raid6: sse2x4   gen() 21204 MB/s
[    4.144948] raid6: sse2x4   xor() 11803 MB/s
[    4.212946] raid6: sse2x2   gen() 21343 MB/s
[    4.280946] raid6: sse2x2   xor() 12998 MB/s
[    4.348948] raid6: sse2x1   gen() 17872 MB/s
[    4.416949] raid6: sse2x1   xor()  9116 MB/s
[    4.416958] raid6: using algorithm avx2x2 gen() 50930 MB/s
[    4.416969] raid6: .... xor() 30268 MB/s, rmw enabled
[    4.416979] raid6: using avx2x2 recovery algorithm
[    4.417774] xor: automatically using best checksumming function   avx       
[    4.428816] Btrfs loaded, crc32c=crc32c-intel
[    4.489183] EXT4-fs (nvme0n1p4): mounted filesystem with ordered data mode. Opts: (null)
[    4.615307] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[    4.628309] systemd[1]: Inserted module 'autofs4'
[    4.697257] systemd[1]: systemd 245.4-4ubuntu3.6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    4.717222] systemd[1]: Detected architecture x86-64.
[    4.740341] systemd[1]: Set hostname to <jeronimo17-GIGABYTE-AORUS-7-KB>.
[    4.805139] systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly.
[    4.829462] systemd[1]: Created slice system-modprobe.slice.
[    4.831571] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    4.833715] systemd[1]: Created slice User and Session Slice.
[    4.835648] systemd[1]: Started ntp-systemd-netif.path.
[    4.837662] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.839645] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.841675] systemd[1]: Reached target User and Group Name Lookups.
[    4.843575] systemd[1]: Reached target Remote File Systems.
[    4.845534] systemd[1]: Reached target Slices.
[    4.847412] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    4.849379] systemd[1]: Listening on LVM2 poll daemon socket.
[    4.851243] systemd[1]: Listening on Syslog Socket.
[    4.853660] systemd[1]: Listening on Process Core Dump Socket.
[    4.855525] systemd[1]: Listening on fsck to fsckd communication Socket.
[    4.857388] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    4.859290] systemd[1]: Listening on Journal Audit Socket.
[    4.861164] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.863056] systemd[1]: Listening on Journal Socket.
[    4.864958] systemd[1]: Listening on udev Control Socket.
[    4.866861] systemd[1]: Listening on udev Kernel Socket.
[    4.869213] systemd[1]: Mounting Huge Pages File System...
[    4.871515] systemd[1]: Mounting POSIX Message Queue File System...
[    4.873860] systemd[1]: Mounting Kernel Debug File System...
[    4.876187] systemd[1]: Mounting Kernel Trace File System...
[    4.879202] systemd[1]: Starting Journal Service...
[    4.882055] systemd[1]: Starting Availability of block devices...
[    4.884719] systemd[1]: Starting Set the console keyboard layout...
[    4.887296] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    4.890013] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    4.892153] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[    4.893275] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    4.894021] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    4.895916] systemd[1]: Starting Load Kernel Modules...
[    4.899012] systemd[1]: Starting Remount Root and Kernel File Systems...
[    4.902237] systemd[1]: Starting udev Coldplug all Devices...
[    4.904896] systemd[1]: Starting Uncomplicated firewall...
[    4.905032] clevo_xsm_wmi: loading out-of-tree module taints kernel.
[    4.905423] EXT4-fs (nvme0n1p4): re-mounted. Opts: errors=remount-ro
[    4.907299] clevo_xsm_wmi: module verification failed: signature and/or required key missing - tainting kernel
[    4.907458] clevo_xsm_wmi: Model Clevo AORUS 7 KB found
[    4.910335] systemd[1]: Mounted Huge Pages File System.
[    4.911827] systemd[1]: Mounted POSIX Message Queue File System.
[    4.913336] systemd[1]: Mounted Kernel Debug File System.
[    4.914818] systemd[1]: Mounted Kernel Trace File System.
[    4.916456] systemd[1]: Finished Availability of block devices.
[    4.919061] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    4.921358] systemd[1]: Finished Remount Root and Kernel File Systems.
[    4.923187] systemd[1]: Finished Set the console keyboard layout.
[    4.924668] systemd[1]: Started Journal Service.
[    4.930718] input: Clevo Airplane-Mode Hotkey as /devices/platform/clevo_xsm_wmi/input/input18
[    4.931659] clevo_xsm_wmi: Polling thread started (PID: 438), polling at 5 Hz
[    4.932952] clevo_xsm_wmi clevo_xsm_wmi: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    4.933517] systemd-journald[414]: Received client request to flush runtime journal.
[    4.941104] lp: driver loaded but no devices found
[    4.943545] ppdev: user-space parallel port driver
[    5.056864] input: Intel HID events as /devices/platform/INT33D5:00/input/input19
[    5.100392] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    5.136074] nvidia: module license 'NVIDIA' taints kernel.
[    5.136074] Disabling lock debugging due to kernel taint
[    5.149448] pstore: Using crash dump compression: deflate
[    5.149465] pstore: Registered efi as persistent store backend
[    5.149895] ee1004 1-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
[    5.152810] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    5.153136] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.153290] mc: Linux media interface: v0.10
[    5.158773] videodev: Linux video capture interface: v2.00
[    5.164030] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    5.164031] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    5.164031] RAPL PMU: hw unit of domain package 2^-14 Joules
[    5.164032] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    5.164032] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    5.164032] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    5.166027] Bluetooth: Core ver 2.22
[    5.166057] nvidia-nvlink: Nvlink Core is being initialized, major device number 511
[    5.166069] NET: Registered protocol family 31
[    5.166070] Bluetooth: HCI device and connection manager initialized
[    5.166074] Bluetooth: HCI socket layer initialized
[    5.166078] Bluetooth: L2CAP socket layer initialized
[    5.166081] Bluetooth: SCO socket layer initialized
[    5.168667] Intel(R) Wireless WiFi driver for Linux
[    5.168730] iwlwifi 0000:0c:00.0: enabling device (0000 -> 0002)
[    5.171464] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    5.171693] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    5.171830] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[    5.171930] snd_hda_intel 0000:01:00.1: Disabling MSI
[    5.171935] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    5.172437] iwlwifi 0000:0c:00.0: Direct firmware load for iwlwifi-cc-a0-56.ucode failed with error -2
[    5.174886] iwlwifi 0000:0c:00.0: api flags index 2 larger than supported by driver
[    5.174896] iwlwifi 0000:0c:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.22
[    5.174898] iwlwifi 0000:0c:00.0: Found debug destination: EXTERNAL_DRAM
[    5.174899] iwlwifi 0000:0c:00.0: Found debug configuration: 0
[    5.175106] iwlwifi 0000:0c:00.0: loaded firmware version 55.d9698065.0 cc-a0-55.ucode op_mode iwlmvm
[    5.175292] iwlwifi 0000:0c:00.0: Direct firmware load for iwl-debug-yoyo.bin failed with error -2
[    5.179549] nvidia 0000:01:00.0: enabling device (0000 -> 0003)
[    5.179769] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
[    5.185769] uvcvideo: Found UVC 1.00 device Chicony USB2.0 Camera (04f2:b685)
[    5.195491] input: Chicony USB2.0 Camera: Chicony  as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input20
[    5.200939] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    5.203971] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.222971] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  460.80  Fri May  7 06:55:54 UTC 2021
[    5.237005] Adding 8297468k swap on /dev/nvme0n1p6.  Priority:-2 extents:1 across:8297468k SSFS
[    5.260771] usbcore: registered new interface driver btusb
[    5.266700] Bluetooth: hci0: Firmware revision 0.0 build 121 week 36 2020
[    5.267089] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[    5.271027] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  460.80  Fri May  7 06:48:29 UTC 2021
[    5.280112] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[    5.280792] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
[    5.281013] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22
[    5.281143] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input23
[    5.281254] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input24
[    5.281361] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input25
[    5.282253] usbcore: registered new interface driver uvcvideo
[    5.282255] USB Video Class driver (1.1.1)
[    5.284516] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC293: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    5.284521] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.284525] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[    5.284528] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    5.284530] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    5.284534] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[    5.284537] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    5.306654] input: ELAN0412:00 04F3:3162 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-2/i2c-ELAN0412:00/0018:04F3:3162.0001/input/input26
[    5.306919] input: ELAN0412:00 04F3:3162 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-2/i2c-ELAN0412:00/0018:04F3:3162.0001/input/input28
[    5.307160] hid-multitouch 0018:04F3:3162.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN0412:00 04F3:3162] on i2c-ELAN0412:00
[    5.316049] EXT4-fs (nvme0n1p5): mounted filesystem with ordered data mode. Opts: (null)
[    5.344889] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20200528/nsarguments-59)
[    5.357368] audit: type=1400 audit(1621181690.564:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=725 comm="apparmor_parser"
[    5.358718] audit: type=1400 audit(1621181690.564:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=720 comm="apparmor_parser"
[    5.358983] audit: type=1400 audit(1621181690.564:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=729 comm="apparmor_parser"
[    5.359068] audit: type=1400 audit(1621181690.564:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=727 comm="apparmor_parser"
[    5.359071] audit: type=1400 audit(1621181690.564:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=727 comm="apparmor_parser"
[    5.359353] audit: type=1400 audit(1621181690.564:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=718 comm="apparmor_parser"
[    5.359918] audit: type=1400 audit(1621181690.564:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=719 comm="apparmor_parser"
[    5.360519] audit: type=1400 audit(1621181690.564:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=728 comm="apparmor_parser"
[    5.362818] audit: type=1400 audit(1621181690.568:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=735 comm="apparmor_parser"
[    5.362845] audit: type=1400 audit(1621181690.568:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=716 comm="apparmor_parser"
[    5.374411] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29
[    5.374486] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30
[    5.374627] iwlwifi 0000:0c:00.0: Detected Intel(R) Wi-Fi 6 AX200 160MHz, REV=0x340
[    5.377114] intel_rapl_common: Found RAPL domain package
[    5.377115] intel_rapl_common: Found RAPL domain core
[    5.377116] intel_rapl_common: Found RAPL domain uncore
[    5.377117] intel_rapl_common: Found RAPL domain dram
[    5.551724] iwlwifi 0000:0c:00.0: base HW address: e0:d4:e8:73:2b:a7
[    5.564782] thermal thermal_zone3: failed to read out thermal zone (-61)
[    5.567881] iwlwifi 0000:0c:00.0 wlp12s0: renamed from wlan0
[    5.975281] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.975600] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
[    6.096937] nvidia-gpu 0000:01:00.3: i2c timeout error e0000000
[    6.097518] ucsi_ccg 0-0008: i2c_transfer failed -110
[    6.097992] ucsi_ccg 0-0008: ucsi_ccg_init failed - -110
[    6.098454] ucsi_ccg: probe of 0-0008 failed with error -110
[    6.177296] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    6.177297] Bluetooth: BNEP filters: protocol multicast
[    6.177300] Bluetooth: BNEP socket layer initialized
[    6.180652] NET: Registered protocol family 38
[    6.300951] Generic FE-GE Realtek PHY r8169-d01:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-d01:00, irq=IGNORE)
[    6.400958] snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to polling mode: last cmd=0x0093603f
[    6.497069] r8169 0000:0d:00.1 enp13s0f1: Link is Down
[    7.405047] snd_hda_intel 0000:00:1f.3: No response from codec, disabling MSI: last cmd=0x0093603f
[    8.413138] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x0093603f
[    9.949439] r8169 0000:0d:00.1 enp13s0f1: Link is Up - 1Gbps/Full - flow control rx/tx
[    9.949463] IPv6: ADDRCONF(NETDEV_CHANGE): enp13s0f1: link becomes ready
[    9.997431] vboxdrv: Found 12 processor cores
[   10.017340] vboxdrv: TSC mode is Invariant, tentative frequency 2592005053 Hz
[   10.017341] vboxdrv: Successfully loaded version 6.1.16_Ubuntu (interface 0x00300000)
[   10.021770] VBoxNetFlt: Successfully started.
[   10.024989] VBoxNetAdp: Successfully started.
[   11.369604] bpfilter: Loaded bpfilter_umh pid 1484
[   11.369654] Started bpfilter
[   11.521189] Bluetooth: RFCOMM TTY layer initialized
[   11.521192] Bluetooth: RFCOMM socket layer initialized
[   11.521195] Bluetooth: RFCOMM ver 1.11

[Jeronimo17]

Let's see if the problem comes from the audio, this happened just when I was playing a new game with background music.

This is the journalctl log, sound starts choppy internal laptop keyboard stops responding and I connect a usb keyboard, to try to turn it off well although finally I have to remove power to turn it off

Code: Select all

may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]: snd_pcm_avail() returned a value that is exceptionally large: 440960 bytes (2499 ms).
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]: Most likely this is a bug in the ALSA driver 'snd_hda_intel'. Please report this issue to the ALSA developers.
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]: snd_pcm_dump():
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]: Soft volume PCM
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]: Control: PCM Playback Volume
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]: min_dB: -51
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]: max_dB: 0
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]: resolution: 256
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]: Its setup is:
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   stream       : PLAYBACK
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   access       : MMAP_INTERLEAVED
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   format       : S16_LE
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   subformat    : STD
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   channels     : 2
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   rate         : 44100
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   exact rate   : 44100 (44100/1)
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   msbits       : 16
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   buffer_size  : 4408
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   period_size  : 1102
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   period_time  : 24988
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   tstamp_mode  : ENABLE
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   tstamp_type  : MONOTONIC
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   period_step  : 1
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   avail_min    : 1102
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   period_event : 1
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   start_threshold  : -1
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   stop_threshold   : 4962966789362286592
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   silence_threshold: 0
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   silence_size : 0
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   boundary     : 4962966789362286592
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]: Slave: Hardware PCM card 0 'HDA Intel PCH' device 0 subdevice 0
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]: Its setup is:
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   stream       : PLAYBACK
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   access       : MMAP_INTERLEAVED
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   format       : S16_LE
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   subformat    : STD
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   channels     : 2
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   rate         : 44100
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   exact rate   : 44100 (44100/1)
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   msbits       : 16
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   buffer_size  : 4408
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   period_size  : 1102
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   period_time  : 24988
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   tstamp_mode  : ENABLE
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   tstamp_type  : MONOTONIC
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   period_step  : 1
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   avail_min    : 1102
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   period_event : 1
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   start_threshold  : -1
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   stop_threshold   : 4962966789362286592
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   silence_threshold: 0
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   silence_size : 0
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   boundary     : 4962966789362286592
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   appl_ptr     : 47704880
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   hw_ptr       : 47810712
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]: snd_pcm_delay() returned a value that is exceptionally large: -247148 bytes (-1401 ms).
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]: Most likely this is a bug in the ALSA driver 'snd_hda_intel'. Please report this issue to the ALSA developers.
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]: snd_pcm_dump():
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]: Soft volume PCM
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]: Control: PCM Playback Volume
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]: min_dB: -51
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]: max_dB: 0
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]: resolution: 256
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]: Its setup is:
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   stream       : PLAYBACK
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   access       : MMAP_INTERLEAVED
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   format       : S16_LE
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   subformat    : STD
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   channels     : 2
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   rate         : 44100
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   exact rate   : 44100 (44100/1)
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   msbits       : 16
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   buffer_size  : 4408
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   period_size  : 1102
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   period_time  : 24988
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   tstamp_mode  : ENABLE
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   tstamp_type  : MONOTONIC
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   period_step  : 1
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   avail_min    : 1102
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   period_event : 1
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   start_threshold  : -1
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   stop_threshold   : 4962966789362286592
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   silence_threshold: 0
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   silence_size : 0
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   boundary     : 4962966789362286592
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]: Slave: Hardware PCM card 0 'HDA Intel PCH' device 0 subdevice 0
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]: Its setup is:
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   stream       : PLAYBACK
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   access       : MMAP_INTERLEAVED
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   format       : S16_LE
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   subformat    : STD
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   channels     : 2
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   rate         : 44100
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   exact rate   : 44100 (44100/1)
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   msbits       : 16
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   buffer_size  : 4408
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   period_size  : 1102
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   period_time  : 24988
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   tstamp_mode  : ENABLE
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   tstamp_type  : MONOTONIC
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   period_step  : 1
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   avail_min    : 1102
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   period_event : 1
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   start_threshold  : -1
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   stop_threshold   : 4962966789362286592
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   silence_threshold: 0
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   silence_size : 0
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   boundary     : 4962966789362286592
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   appl_ptr     : 47748960
may 29 18:44:35 jeronimo17-GIGABYTE-AORUS-7-KB pulseaudio[1370]:   hw_ptr       : 47810784
may 29 18:44:44 jeronimo17-GIGABYTE-AORUS-7-KB kernel: usb 1-2: new low-speed USB device number 5 using xhci_hcd
may 29 18:44:45 jeronimo17-GIGABYTE-AORUS-7-KB kernel: usb 1-2: New USB device found, idVendor=04d9, idProduct=1603, bcdDevice= 3.10
may 29 18:44:45 jeronimo17-GIGABYTE-AORUS-7-KB kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
may 29 18:44:45 jeronimo17-GIGABYTE-AORUS-7-KB kernel: usb 1-2: Product: USB Keyboard
may 29 18:44:45 jeronimo17-GIGABYTE-AORUS-7-KB kernel: usb 1-2: Manufacturer:  
may 29 18:44:45 jeronimo17-GIGABYTE-AORUS-7-KB kernel: input:   USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:04D9:1603.0003/input/input31
may 29 18:44:45 jeronimo17-GIGABYTE-AORUS-7-KB kernel: hid-generic 0003:04D9:1603.0003: input,hidraw2: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:14.0-2/input0
may 29 18:44:45 jeronimo17-GIGABYTE-AORUS-7-KB kernel: input:   USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:04D9:1603.0004/input/input32
may 29 18:44:45 jeronimo17-GIGABYTE-AORUS-7-KB mtp-probe[17439]: checking bus 1, device 5: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2"
may 29 18:44:45 jeronimo17-GIGABYTE-AORUS-7-KB mtp-probe[17439]: bus: 1, device: 5 was not an MTP device
may 29 18:44:45 jeronimo17-GIGABYTE-AORUS-7-KB kernel: input:   USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:04D9:1603.0004/input/input33
may 29 18:44:45 jeronimo17-GIGABYTE-AORUS-7-KB kernel: hid-generic 0003:04D9:1603.0004: input,hidraw3: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:14.0-2/input1
may 29 18:44:46 jeronimo17-GIGABYTE-AORUS-7-KB systemd-logind[841]: Watching system buttons on /dev/input/event20 (  USB Keyboard System Control)
may 29 18:44:46 jeronimo17-GIGABYTE-AORUS-7-KB systemd-logind[841]: Watching system buttons on /dev/input/event5 (  USB Keyboard)
may 29 18:44:46 jeronimo17-GIGABYTE-AORUS-7-KB mtp-probe[17498]: checking bus 1, device 5: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2"
may 29 18:44:46 jeronimo17-GIGABYTE-AORUS-7-KB mtp-probe[17498]: bus: 1, device: 5 was not an MTP device
may 29 18:46:28 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=375067 end=375068) time 132 us, min 1063, max 1079, scanline start 1059, end 1080
may 29 18:46:47 jeronimo17-GIGABYTE-AORUS-7-KB acpid[791]: client 1099[0:0] has disconnected

[Jeronimo17]

I think that all of the above is worthless.

We could start over

The problem seems to come from thermald.service I have deactivated it with systemctl disable thermald.service and removed the limitation of c-states

And for now I am not experiencing a problem, although I have configured the kernel with GRUB_CMDLINE_LINUX_DEFAULT="pcie_aspm=off nvidia-drm.modeset=1 enable_psr=0" in /etc/default/grub

Why have I read out there that it usually gives problems with laptops? and on firmware with integrated cooling systems

Maybe it has to do with the temperature error when reading the nvme?

Code: Select all

sensors
coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +43.0°C  (high = +100.0°C, crit = +100.0°C)
Core 0:        +41.0°C  (high = +100.0°C, crit = +100.0°C)
Core 1:        +42.0°C  (high = +100.0°C, crit = +100.0°C)
Core 2:        +42.0°C  (high = +100.0°C, crit = +100.0°C)
Core 3:        +40.0°C  (high = +100.0°C, crit = +100.0°C)
Core 4:        +39.0°C  (high = +100.0°C, crit = +100.0°C)
Core 5:        +40.0°C  (high = +100.0°C, crit = +100.0°C)

clevo_xsm_wmi-isa-0000
Adapter: ISA adapter
CPU fan:         2059 RPM
CPU temperature:  +44.0°C  

BAT0-acpi-0
Adapter: ACPI interface
in0:          16.26 V  
curr1:         0.00 A  

iwlwifi_1-virtual-0
Adapter: Virtual device
temp1:            N/A  

pch_cometlake-virtual-0
Adapter: Virtual device
temp1:        +60.0°C  

nvme-pci-0600
Adapter: PCI adapter
Composite:    +32.9°C  (low  =  -0.1°C, high = +74.8°C)
                       (crit = +79.8°C)
ERROR: Can't get value of subfeature temp3_min: I/O error
ERROR: Can't get value of subfeature temp3_max: I/O error
Sensor 2:     +32.9°C  (low  =  +0.0°C, high =  +0.0°C)
ERROR: Can't get value of subfeature temp4_min: I/O error
ERROR: Can't get value of subfeature temp4_max: I/O error
Sensor 3:     +37.9°C  (low  =  +0.0°C, high =  +0.0°C)
ERROR: Can't get value of subfeature temp5_min: I/O error
ERROR: Can't get value of subfeature temp5_max: I/O error
Sensor 4:     +32.9°C  (low  =  +0.0°C, high =  +0.0°C)
ERROR: Can't get value of subfeature temp6_min: I/O error
ERROR: Can't get value of subfeature temp6_max: I/O error
Sensor 5:     +32.9°C  (low  =  +0.0°C, high =  +0.0°C)
ERROR: Can't get value of subfeature temp7_min: I/O error
ERROR: Can't get value of subfeature temp7_max: I/O error
Sensor 6:     +31.9°C  (low  =  +0.0°C, high =  +0.0°C)

acpitz-acpi-0
Adapter: ACPI interface
temp1:        +44.0°C  (crit = +120.0°C)

Thanks, greetings

[Jeronimo17]

Code: Select all

may 24 20:28:27 jeronimo17-GIGABYTE-AORUS-7-KB kernel: mmcblk0: mmc0:aaaa SD08G 7.40 GiB 
may 24 20:28:27 jeronimo17-GIGABYTE-AORUS-7-KB kernel:  mmcblk0: p1
may 24 20:29:29 jeronimo17-GIGABYTE-AORUS-7-KB kernel: mmc0: card aaaa removed
may 24 22:38:10 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=5540133 end=5540134) time 212 us, min 1063, max 1079, scanline start 1053, end 1086
may 24 22:38:10 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=5540135 end=5540136) time 248 us, min 1063, max 1079, scanline start 1042, end 1080
may 24 22:38:38 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=5544234 end=5544235) time 185 us, min 1063, max 1079, scanline start 1058, end 1087
may 24 22:38:46 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=5545381 end=5545382) time 157 us, min 1063, max 1079, scanline start 1062, end 1086
may 24 22:38:57 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=5546981 end=5546982) time 283 us, min 1063, max 1079, scanline start 1051, end 1095
may 24 22:39:13 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=5549291 end=5549292) time 163 us, min 1063, max 1079, scanline start 1056, end 1082
may 24 22:39:13 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=5549293 end=5549294) time 184 us, min 1063, max 1079, scanline start 1050, end 1082
may 24 22:39:13 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=5549295 end=5549296) time 163 us, min 1063, max 1079, scanline start 1058, end 1085
may 24 22:39:13 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=5549303 end=5549304) time 173 us, min 1063, max 1079, scanline start 1053, end 1080
may 24 22:39:13 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=5549305 end=5549306) time 173 us, min 1063, max 1079, scanline start 1052, end 1079
may 24 22:39:13 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=5549311 end=5549312) time 173 us, min 1063, max 1079, scanline start 1051, end 1078
may 24 22:39:13 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=5549313 end=5549314) time 167 us, min 1063, max 1079, scanline start 1053, end 1081
may 24 22:39:13 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=5549315 end=5549316) time 173 us, min 1063, max 1079, scanline start 1055, end 1082
may 24 22:39:13 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=5549318 end=5549319) time 167 us, min 1063, max 1079, scanline start 1054, end 1081
may 24 22:39:13 jeronimo17-GIGABYTE-AORUS-7-KB kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=5549335 end=5549336) time 234 us, min 1063, max 1079, scanline start 1041, end 1078
may 24 22:40:05 jeronimo17-GIGABYTE-AORUS-7-KB systemd-shutdown[1]: Syncing filesystems and block devices.
may 24 22:40:05 jeronimo17-GIGABYTE-AORUS-7-KB systemd-shutdown[1]: Sending SIGTERM to remaining processes...

It didn't happen again until today, with heavy use of the integrated keyboard, I wasn't gaming.
But he had nomachine and several consoles.

Total blocking of the keyboard and power button, I had to remove the power supply and battery.

[SMG]

It didn't happen again until today, with heavy use of the integrated keyboard, I wasn't gaming.
But he had nomachine and several consoles.

Total blocking of the keyboard and power button, I had to remove the power supply and battery.

You have not posted in nearly a near. Please provide an updated version of inxi -Fxxxrz.

[Jeronimo17]

Thank you for your response

Code: Select all

GIGABYTE-AORUS-7-KB ~ $ inxi -Fxxxrz
System:    Kernel: 5.13.0-44-generic x86_64 bits: 64 compiler: N/A Desktop: Xfce 4.16.0 tk: Gtk 3.24.20 
           info: xfce4-panel wm: xfwm4 dm: LightDM 1.30.0 Distro: Linux Mint 20.3 Una 
           base: Ubuntu 20.04 focal 
Machine:   Type: Laptop System: GIGABYTE product: AORUS 7 KB v: N/A serial: <filter> Chassis: type: 10 
           serial: <filter> 
           Mobo: GIGABYTE model: AORUS 7 KB serial: <filter> UEFI: INSYDE v: FB06 date: 08/03/2020 
Battery:   ID-1: BAT0 charge: 42.9 Wh condition: 43.8/47.2 Wh (93%) volts: 14.8/14.4 model: Notebook BAT 
           type: Li-ion serial: <filter> status: Unknown 
CPU:       Topology: 6-Core model: Intel Core i7-10750H bits: 64 type: MT MCP arch: N/A L2 cache: 12.0 MiB 
           flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 62399 
           Speed: 800 MHz min/max: 800/5000 MHz Core speeds (MHz): 1: 800 2: 800 3: 1015 4: 800 5: 800 
           6: 800 7: 800 8: 800 9: 800 10: 800 11: 800 12: 800 
Graphics:  Device-1: Intel UHD Graphics vendor: CLEVO/KAPOK driver: i915 v: kernel bus ID: 00:02.0 
           chip ID: 8086:9bc4 
           Device-2: NVIDIA TU106 [GeForce RTX 2060] vendor: CLEVO/KAPOK driver: nvidia v: 510.73.05 
           bus ID: 01:00.0 chip ID: 10de:1f15 
           Display: x11 server: X.Org 1.20.13 driver: modesetting,nvidia unloaded: fbdev,nouveau,vesa 
           resolution: 1920x1080~144Hz 
           OpenGL: renderer: NVIDIA GeForce RTX 2060/PCIe/SSE2 v: 4.6.0 NVIDIA 510.73.05 
           direct render: Yes 
Audio:     Device-1: Intel Comet Lake PCH cAVS vendor: CLEVO/KAPOK driver: snd_hda_intel v: kernel 
           bus ID: 00:1f.3 chip ID: 8086:06c8 
           Device-2: NVIDIA TU106 High Definition Audio driver: snd_hda_intel v: kernel bus ID: 01:00.1 
           chip ID: 10de:10f9 
           Sound Server: ALSA v: k5.13.0-44-generic 
Network:   Device-1: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel port: 5000 bus ID: 0c:00.0 
           chip ID: 8086:2723 
           IF: wlp12s0 state: down mac: <filter> 
           Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: CLEVO/KAPOK 
           driver: r8169 v: kernel port: 3000 bus ID: 0d:00.1 chip ID: 10ec:8168 
           IF: enp13s0f1 state: up speed: 1000 Mbps duplex: full mac: <filter> 
Drives:    Local Storage: total: 1.12 TiB used: 643.84 GiB (56.1%) 
           ID-1: /dev/nvme0n1 model: SX8200PNP-512GT-S size: 476.94 GiB speed: 31.6 Gb/s lanes: 4 
           serial: <filter> rev: 42A4SANA scheme: GPT 
           ID-2: /dev/sda model: Q-720 size: 670.69 GiB speed: 6.0 Gb/s serial: <filter> rev: 731 
           scheme: GPT 
Partition: ID-1: / size: 144.03 GiB used: 51.43 GiB (35.7%) fs: ext4 dev: /dev/nvme0n1p4 
           ID-2: /home size: 192.12 GiB used: 134.37 GiB (69.9%) fs: ext4 dev: /dev/nvme0n1p5 
           ID-3: swap-1 size: 14.65 GiB used: 2.8 MiB (0.0%) fs: swap dev: /dev/nvme0n1p6 
Sensors:   System Temperatures: cpu: 46.0 C mobo: N/A gpu: nvidia temp: 49 C 
           Fan Speeds (RPM): cpu: 2120 
Repos:     No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/additional-repositories.list 
           1: deb https://dl.winehq.org/wine-builds/ubuntu/ bionic main
           2: deb http://cz.archive.ubuntu.com/ubuntu xenial main
           3: deb https://dl.winehq.org/wine-builds/ubuntu/ focal main
           Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list 
           1: deb [arch=amd64] https://brave-browser-apt-release.s3.brave.com/ stable main
           Active apt repos in: /etc/apt/sources.list.d/celestia.list 
           1: deb https://celestia.space/packages focal main
           Active apt repos in: /etc/apt/sources.list.d/cuda-ubuntu2004-11-2-local.list 
           1: deb file:///var/cuda-repo-ubuntu2004-11-2-local /
           Active apt repos in: /etc/apt/sources.list.d/cuda.list 
           1: deb http://developer.download.nvidia.com/compute/cuda/repos/ubuntu1604/x86_64 /
           Active apt repos in: /etc/apt/sources.list.d/google-earth-pro.list 
           1: deb [arch=amd64] http://dl.google.com/linux/earth/deb/ stable main
           Active apt repos in: /etc/apt/sources.list.d/graphics-drivers-dev-focal.list 
           1: deb http://ppa.launchpad.net/graphics-drivers/dev/ubuntu focal main
           Active apt repos in: /etc/apt/sources.list.d/keybase.list 
           1: deb http://prerelease.keybase.io/deb stable main
           Active apt repos in: /etc/apt/sources.list.d/lutris-team-lutris-focal.list 
           1: deb http://ppa.launchpad.net/lutris-team/lutris/ubuntu focal main
           Active apt repos in: /etc/apt/sources.list.d/obsproject-obs-studio-focal.list 
           1: deb http://ppa.launchpad.net/obsproject/obs-studio/ubuntu focal main
           Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list 
           1: deb http://packages.linuxmint.com una main upstream import backport #id:linuxmint_main
           2: deb http://archive.ubuntu.com/ubuntu focal main restricted universe multiverse
           3: deb http://archive.ubuntu.com/ubuntu focal-updates main restricted universe multiverse
           4: deb http://archive.ubuntu.com/ubuntu focal-backports main restricted universe multiverse
           5: deb http://security.ubuntu.com/ubuntu/ focal-security main restricted universe multiverse
           6: deb http://archive.canonical.com/ubuntu/ focal partner
           Active apt repos in: /etc/apt/sources.list.d/opera-stable.list 
           1: deb https://deb.opera.com/opera-stable/ stable non-free #Opera Browser (final releases)
           Active apt repos in: /etc/apt/sources.list.d/saiarcot895-chromium-beta-focal.list 
           1: deb http://ppa.launchpad.net/saiarcot895/chromium-beta/ubuntu focal main
           Active apt repos in: /etc/apt/sources.list.d/signal-xenial.list 
           1: deb [arch=amd64 signed-by=/usr/share/keyrings/signal-desktop-keyring.gpg] https://updates.signal.org/desktop/apt xenial main
           Active apt repos in: /etc/apt/sources.list.d/skype-stable.list 
           1: deb [arch=amd64] https://repo.skype.com/deb stable main
           Active apt repos in: /etc/apt/sources.list.d/slimbook-slimbook-focal.list 
           1: deb http://ppa.launchpad.net/slimbook/slimbook/ubuntu focal main
           Active apt repos in: /etc/apt/sources.list.d/sublime-text.list 
           1: deb https://download.sublimetext.com/ apt/stable/
           Active apt repos in: /etc/apt/sources.list.d/team-xbmc-xbmc-nightly-focal.list 
           1: deb http://ppa.launchpad.net/team-xbmc/xbmc-nightly/ubuntu focal main
           Active apt repos in: /etc/apt/sources.list.d/umang-indicator-stickynotes-focal.list 
           1: deb http://ppa.launchpad.net/umang/indicator-stickynotes/ubuntu focal main
Info:      Processes: 323 Uptime: 1h 20m Memory: 15.33 GiB used: 4.82 GiB (31.4%) Init: systemd v: 245 
           runlevel: 5 Compilers: gcc: 9.4.0 alt: 5/8/9 clang: 10.0.0-4ubuntu1 Shell: bash v: 5.0.17 
           running in: xfce4-terminal inxi: 3.0.38 

[SMG]

And for now I am not experiencing a problem, although I have configured the kernel with GRUB_CMDLINE_LINUX_DEFAULT="pcie_aspm=off nvidia-drm.modeset=1 enable_psr=0" in /etc/default/grub

Are you still using these kernel parameters? I've not heard of the last one. My understanding of it is i915.enable_psr=0.

I am expecting to soon hear of availability of the 5.15 kernel, but until then there is a 5.14-oem kernel available. Your hardware is quite new and it could be there are still optimizations to come in future kernels.

If you want to try the 5.14-oem kernel, you can install the latest one kernel with

Code: Select all

sudo apt install linux-oem-20.04d

and reboot.

[Jeronimo17]

No, I've had it that way for a long time.

Code: Select all

GRUB_CMDLINE_LINUX_DEFAULT="pcie_aspm=off nvidia-drm.modeset=1"

I'll try the new kernel, thanks

[Jeronimo17]

5.14-oem does not work well for me, I have noticed slowdowns in the mouse when doing some things like opening a program with wine. with 5.13 it never happens.

[SMG]

No, I've had it that way for a long time.

Code: Select all

GRUB_CMDLINE_LINUX_DEFAULT="pcie_aspm=off nvidia-drm.modeset=1"

I'll try the new kernel, thanks

I'm curious as to why you are using the nvidia-drm.modeset=1? This is info I found for it Understanding nvidia-drm.modeset=1 (NVIDIA Linux driver modesetting). Your computer seems to be somewhat unique with how it compares with other computers with the same install so that kernel parameter may be needed for your particular hardware.

Have you checked recently for any BIOS/UEFI updates from the manufacturer?

[Jeronimo17]

Bios yes I have checked every now and then, there has been no new update.

That setting eliminates the screen tearing for me.

viewtopic.php?t=337384

Another thing I'm using is viewtopic.php?t=287190 Clevo-xsm-wmi, a driver to control the RGB lights that make up the keyboard, I don't know if that could be creating the lockup that happens so infrequently.
What I hate the most is that the start button does not respond to a general lock as in my old laptop.

[Jeronimo17]

I almost messed up, I removed clevo-xsm-wmi and I couldn't reinstall it, it seems that it happens what it says here https://forum.manjaro.org/t/clevo-xsm-w ... 5-10/69747 and https://forum.endeavouros.com/t/clevo-k ... rror/23583,

Code: Select all

insmod: ERROR: could not insert module clevo-xsm-wmi.ko: Invalid module format

No matter how many times I uninstalled and did all the steps again

I managed it by passing the timeshift files.

By the way I see a lot of versions of clevo-xsm-wmi, I don't know which one is the most updated.

[SMG]

That setting eliminates the screen tearing for me.

Now you have said that I recall reading that in this post so others are using it as well.

Another thing I'm using is viewtopic.php?t=287190 Clevo-xsm-wmi, a driver to control the RGB lights that make up the keyboard, I don't know if that could be creating the lockup that happens so infrequently.

Sorry, but I do not know. I would think if they were, there would be some kind of message in dmesg, syslog, or journalctl.