Hi,
I have Linux Mint 20.2 Cinnamon.
My mouse pointer does not visually reach the left edge of the screen. Logically the pointer functionality does reach the left edge, in the sense that it can select and copy text that extends to the left edge, but the pointer cannot be viewed performing this action; the displayed pointer stops about two millimeters "inland" from the border.
My mouse pointer reaches the upper, lower, and right edges of the screen without any problem.
My computer technician did some testing and found no problem with the screen (brand new), computer (3 years old), nor the mouse. (My mouse is indeed old, but the problem occurred even with the technician's new mouse). So we think that the problem is with the software of the operating system (or possibly a driver or firmware).
Can someone try to help me solve this problem?
Mouse doesn't reach left edge of screen (Solved)
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Mouse doesn't reach left edge of screen (Solved)
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 4 times in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Re: Mouse doesn't reach left edge of screen
What theme and mouse pointer are you using?gemk65 wrote: ⤴Wed Oct 13, 2021 9:23 amI have Linux Mint 20.2 Cinnamon.
My mouse pointer does not visually reach the left edge of the screen. Logically the pointer functionality does reach the left edge, in the sense that it can select and copy text that extends to the left edge, but the pointer cannot be viewed performing this action; the displayed pointer stops about two millimeters "inland" from the border.
My mouse pointer reaches the upper, lower, and right edges of the screen without any problem.
Please give us information about your install by entering this command in a terminal:
inxi -FxxxrzClick
</> from the mini toolbar above the textbox where you type your reply and then place your cursor between the code markers and paste the results of the command between the code markers [code]Results[/code]. This will let us know how Mint sees your hardware.
A woman typing on a laptop with LM20.3 Cinnamon.
Re: Mouse doesn't reach left edge of screen
Thank you, SMG.
I should mention that the problem persists even if I change the screen resolution.
I am using the Theme:
Window borders: Mint-Y
Icons: Mint-Y-Aqua
Controls: Mint-Y-Aqua
Mouse Pointer: DMZ-White
Desktop: Mint-Y-Dark
Results of command inxi -Fxxxrz:
I should mention that the problem persists even if I change the screen resolution.
I am using the Theme:
Window borders: Mint-Y
Icons: Mint-Y-Aqua
Controls: Mint-Y-Aqua
Mouse Pointer: DMZ-White
Desktop: Mint-Y-Dark
Results of command inxi -Fxxxrz:
Code: Select all
System:
Kernel: 5.4.0-88-generic x86_64 bits: 64 compiler: gcc v: 9.3.0
Desktop: Cinnamon 5.0.5 wm: muffin 5.0.1 dm: LightDM 1.30.0
Distro: Linux Mint 20.2 Uma base: Ubuntu 20.04 focal
Machine:
Type: Desktop Mobo: GIGABYTE model: MZBSWMP-00 v: 1.x serial: <filter>
UEFI: American Megatrends v: F3 date: 12/21/2016
CPU:
Topology: Quad Core model: Intel Celeron J3160 bits: 64 type: MCP
arch: Airmont rev: 4 L2 cache: 1024 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 12800
Speed: 480 MHz min/max: 480/2240 MHz Core speeds (MHz): 1: 498 2: 505
3: 927 4: 963
Graphics:
Device-1: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx
Integrated Graphics
vendor: Gigabyte driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:22b1
Display: x11 server: X.Org 1.20.11 driver: modesetting
unloaded: fbdev,vesa tty: N/A
OpenGL: renderer: Mesa DRI Intel HD Graphics 400 (BSW) v: 4.6 Mesa 21.0.3
compat-v: 3.0 direct render: Yes
Audio:
Device-1: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series
High Definition Audio
vendor: Gigabyte driver: snd_hda_intel v: kernel bus ID: 00:1b.0
chip ID: 8086:2284
Device-2: Microsoft LifeCam VX-800 type: USB
driver: snd-usb-audio,uvcvideo bus ID: 1-4:4 chip ID: 045e:0766
Sound Server: ALSA v: k5.4.0-88-generic
Network:
Device-1: Intel Wireless 3160 driver: iwlwifi v: kernel port: f040
bus ID: 02:00.0 chip ID: 8086:08b3
IF: wlp2s0 state: down mac: <filter>
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Gigabyte driver: r8169 v: kernel port: e000 bus ID: 03:00.0
chip ID: 10ec:8168
IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 1.82 TiB used: 539.79 GiB (29.0%)
ID-1: /dev/sda vendor: Samsung model: SSD 860 EVO 1TB size: 931.51 GiB
speed: 6.0 Gb/s serial: <filter> rev: 2B6Q scheme: GPT
ID-2: /dev/sdb type: USB vendor: Western Digital
model: WD My Passport 25E1 size: 931.48 GiB speed: <unknown>
serial: <filter> rev: 1015 scheme: GPT
Partition:
ID-1: / size: 915.40 GiB used: 277.81 GiB (30.3%) fs: ext4 dev: /dev/sda2
Sensors:
System Temperatures: cpu: 44.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos:
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/mono-official-stable.list
1: deb https://download.mono-project.com/repo/ubuntu stable-focal main
Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
1: deb http://packages.linuxmint.com uma main upstream import backport #id:linuxmint_main
2: deb http://archive.ubuntu.com/ubuntu focal main restricted universe multiverse
3: deb http://archive.ubuntu.com/ubuntu focal-updates main restricted universe multiverse
4: deb http://archive.ubuntu.com/ubuntu focal-backports main restricted universe multiverse
5: deb http://security.ubuntu.com/ubuntu/ focal-security main restricted universe multiverse
6: deb http://archive.canonical.com/ubuntu/ focal partner
Active apt repos in: /etc/apt/sources.list.d/pinta-maintainers-pinta-stable-focal.list
1: deb http://ppa.launchpad.net/pinta-maintainers/pinta-stable/ubuntu focal main
Active apt repos in: /etc/apt/sources.list.d/skype-stable.list
1: deb [arch=amd64] https://repo.skype.com/deb stable main
Info:
Processes: 201 Uptime: 34m Memory: 7.57 GiB used: 1.22 GiB (16.1%)
Init: systemd v: 245 runlevel: 5 Compilers: gcc: 9.3.0 alt: 9 Shell: bash
v: 5.0.17 running in: gnome-terminal inxi: 3.0.38
Re: Mouse doesn't reach left edge of screen
The launch date for the Intel Celeron J3160 processor was in 2016. Perhaps it could make use of the newer i915 graphics driver available in the 5.11 kernel. If you would like to try it to see if it might help this situation, you can upgrade to the 5.11 kernel using Update Manager.
Instructions for upgrading to the 5.11 kernel:
Instructions for upgrading to the 5.11 kernel:
- Open Update Manager.
- Select View > Linux Kernels and click Continue.
- Make sure 5.11 is selected on the left panel and then click the top-most option on the right panel. An "Install" button will appear.
- Install the kernel and then reboot for it to become active.
A woman typing on a laptop with LM20.3 Cinnamon.
Re: Mouse doesn't reach left edge of screen
I installed the kernel 5.11 and rebooted, but there is no change in the behavior of the mouse pointer.
This problem began after I updated my Mint 19.3 system. I was hoping that Mint 20.2 would solve the problem.
Thank you just the same. If you think of any other possible solutions, please let me know.
This problem began after I updated my Mint 19.3 system. I was hoping that Mint 20.2 would solve the problem.
Thank you just the same. If you think of any other possible solutions, please let me know.
Re: Mouse doesn't reach left edge of screen
So the problem was not there for Mint 19.3, but after you did a fresh install of LM20.2 it was there?
Nothing came to mind in the data you posted. Maybe someone else will have ideas.
A woman typing on a laptop with LM20.3 Cinnamon.
Re: Mouse doesn't reach left edge of screen
The problem was not there for most of 19.3, but it appeared after a recent update to 19.3. When I installed 20.2, the problem was still present.
I don't really know what to make of it, but something seems to be aging or mismatched. The problem could be a driver, it could be the computer, or it could be something else. I will have to be patient.
I don't really know what to make of it, but something seems to be aging or mismatched. The problem could be a driver, it could be the computer, or it could be something else. I will have to be patient.
Re: Mouse doesn't reach left edge of screen
Today the problem fixed itself, just as mysteriously as when it first manifested.
The mouse pointer flickered a bit (disappeared and re-appeared), and then I noticed that it now reached the left edge of the screen, as is normal.
I notice that the mouse does a lot of flickering over certain areas of the screen, such as buttons. I am not sure whether this is normal, or what the issue is, but it is not really a problem, though it might be related to the problem that I had.
The mouse pointer flickered a bit (disappeared and re-appeared), and then I noticed that it now reached the left edge of the screen, as is normal.
I notice that the mouse does a lot of flickering over certain areas of the screen, such as buttons. I am not sure whether this is normal, or what the issue is, but it is not really a problem, though it might be related to the problem that I had.
Re: Mouse doesn't reach left edge of screen
There are effects in the Cinnamon desktop and it is possible some activate when you mouse over buttons. I have a laptop with not a lot of memory, so I have all the effects turned off and do not really know what they do.
If you want to see if turning them off makes a difference, open the Effects app. Moving a slider to the left will turn off the effect. You can see if that makes a difference to what you notice.
A Cinnamon update to 5.0.6 just came through within the past few days. Maybe one of the updates was a factor in the original issue you noticed.
A woman typing on a laptop with LM20.3 Cinnamon.
Re: Mouse doesn't reach left edge of screen
Thank you, SMG.
I always have all of the Effects disabled.
But I will be sure to keep updating my system on a regular basis.
This post is Solved (for now).
I always have all of the Effects disabled.
But I will be sure to keep updating my system on a regular basis.
This post is Solved (for now).
Re: Mouse doesn't reach left edge of screen
The problem returned after a reboot. I will leave this post unSolved for now.
I notice also, after the reboot, that the flickering of the mouse pointer has stopped.
There seems to be some unstable process going on.
I notice also, after the reboot, that the flickering of the mouse pointer has stopped.
There seems to be some unstable process going on.
Re: Mouse doesn't reach left edge of screen
What settings are being used in your Displays app? Are you using the native resolution of the monitor? I noticed there is no resolution listed in your inxi output. Usually, the resolution is listed.
Graphics:
Device-1: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx
Integrated Graphics
vendor: Gigabyte driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:22b1
Display: x11 server: X.Org 1.20.11 driver: modesetting
unloaded: fbdev,vesa tty: N/A
Graphics:
Device-1: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx
Integrated Graphics
vendor: Gigabyte driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:22b1
Display: x11 server: X.Org 1.20.11 driver: modesetting
unloaded: fbdev,vesa tty: N/A
A woman typing on a laptop with LM20.3 Cinnamon.
Re: Mouse doesn't reach left edge of screen
My monitor recommends 1920x1080 (a 16:9 ratio) at 60 Hz, but my vision is not so great, so I need to choose the next level down, which is 1600x900 (also a 16:9 ratio) at 60 Hz.
The mouse pointer displays the problematical behavior no matter what the resolution is.
By the way, my command inxi -Fxz does return the resolution:
The mouse pointer displays the problematical behavior no matter what the resolution is.
By the way, my command inxi -Fxz does return the resolution:
Code: Select all
Graphics:
Device-1: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx
Integrated Graphics
vendor: Gigabyte driver: i915 v: kernel bus ID: 00:02.0
Display: x11 server: X.Org 1.20.11 driver: modesetting
unloaded: fbdev,vesa resolution: 1600x900~60Hz
OpenGL: renderer: Mesa DRI Intel HD Graphics 400 (BSW) v: 4.6 Mesa 21.0.3
direct render: YesRe: Mouse doesn't reach left edge of screen
The only other idea I have is to check your /var/log/Xorg.0.log file to see if there are any errors or warnings related to the mouse. Maybe there might be a clue as to what is happening in that file.
A woman typing on a laptop with LM20.3 Cinnamon.
Re: Mouse doesn't reach left edge of screen
Thanks. The text in the file /var/log/Xorg.0.log is so lengthy that the Forum does not permit me to copy and paste it all. I don't see any mouse warnings, but here is a sample:
Code: Select all
[ 10.174]
X.Org X Server 1.20.11
X Protocol Version 11, Revision 0
[ 10.175] Build Operating System: linux Ubuntu
[ 10.175] Current Operating System: Linux GB-BACE-3160 5.11.0-37-generic #41~20.04.2-Ubuntu SMP Fri Sep 24 09:06:38 UTC 2021 x86_64
[ 10.175] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.11.0-37-generic root=UUID=2c916ae8-1beb-4942-9c98-be705a1b03ac ro quiet splash
[ 10.175] Build Date: 06 July 2021 10:17:51AM
[ 10.175] xorg-server 2:1.20.11-1ubuntu1~20.04.2 (For technical support please see http://www.ubuntu.com/support)
[ 10.175] Current version of pixman: 0.38.4
[ 10.175] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 10.175] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 10.175] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 19 14:29:53 2021
[ 10.194] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 10.199] (==) No Layout section. Using the first Screen section.
[ 10.199] (==) No screen section available. Using defaults.
[ 10.199] (**) |-->Screen "Default Screen Section" (0)
[ 10.199] (**) | |-->Monitor "<default monitor>"
[ 10.201] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 10.201] (==) Automatically adding devices
[ 10.201] (==) Automatically enabling devices
[ 10.201] (==) Automatically adding GPU devices
[ 10.201] (==) Automatically binding GPU devices
[ 10.201] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 10.205] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 10.205] Entry deleted from font path.
[ 10.205] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 10.205] Entry deleted from font path.
[ 10.205] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 10.205] Entry deleted from font path.
[ 10.205] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 10.205] Entry deleted from font path.
[ 10.205] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 10.205] Entry deleted from font path.
[ 10.206] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 10.206] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 10.206] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 10.206] (II) Loader magic: 0x55d4ec1d0020
[ 10.206] (II) Module ABI versions:
[ 10.206] X.Org ANSI C Emulation: 0.4
[ 10.206] X.Org Video Driver: 24.1
[ 10.206] X.Org XInput driver : 24.1
[ 10.206] X.Org Server Extension : 10.0
[ 10.207] (++) using VT number 7
[ 10.207] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 10.211] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 10.224] (--) PCI:*(0@0:2:0) 8086:22b1:1458:1000 rev 53, Mem @ 0x80000000/16777216, 0x90000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 10.225] (II) LoadModule: "glx"
[ 10.226] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 10.235] (II) Module glx: vendor="X.Org Foundation"
[ 10.235] compiled for 1.20.11, module version = 1.0.0
[ 10.235] ABI class: X.Org Server Extension, version 10.0
[ 10.235] (==) Matched modesetting as autoconfigured driver 0
[ 10.235] (==) Matched fbdev as autoconfigured driver 1
[ 10.235] (==) Matched vesa as autoconfigured driver 2
[ 10.235] (==) Assigned the driver to the xf86ConfigLayout
[ 10.235] (II) LoadModule: "modesetting"
[ 10.237] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 10.238] (II) Module modesetting: vendor="X.Org Foundation"
[ 10.238] compiled for 1.20.11, module version = 1.20.11
[ 10.238] Module class: X.Org Video Driver
[ 10.239] ABI class: X.Org Video Driver, version 24.1
[ 10.239] (II) LoadModule: "fbdev"
[ 10.239] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 10.240] (II) Module fbdev: vendor="X.Org Foundation"
[ 10.240] compiled for 1.20.1, module version = 0.5.0
[ 10.240] Module class: X.Org Video Driver
[ 10.240] ABI class: X.Org Video Driver, version 24.0
[ 10.240] (II) LoadModule: "vesa"
[ 10.241] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 10.242] (II) Module vesa: vendor="X.Org Foundation"
[ 10.242] compiled for 1.20.4, module version = 2.4.0
[ 10.242] Module class: X.Org Video Driver
[ 10.242] ABI class: X.Org Video Driver, version 24.0
[ 10.242] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 10.242] (II) FBDEV: driver for framebuffer: fbdev
[ 10.242] (II) VESA: driver for VESA chipsets: vesa
[ 10.266] (II) modeset(0): using drv /dev/dri/card0
[ 10.266] (WW) Falling back to old probe method for fbdev
[ 10.266] (II) Loading sub module "fbdevhw"
[ 10.266] (II) LoadModule: "fbdevhw"
[ 10.266] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 10.267] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 10.267] compiled for 1.20.11, module version = 0.0.2
[ 10.267] ABI class: X.Org Video Driver, version 24.1
[ 10.268] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 10.268] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 10.268] (==) modeset(0): RGB weight 888
[ 10.268] (==) modeset(0): Default visual is TrueColor
[ 10.268] (II) Loading sub module "glamoregl"
[ 10.268] (II) LoadModule: "glamoregl"
[ 10.268] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 10.283] (II) Module glamoregl: vendor="X.Org Foundation"
[ 10.283] compiled for 1.20.11, module version = 1.0.1
[ 10.283] ABI class: X.Org ANSI C Emulation, version 0.4
[ 10.369] (II) modeset(0): glamor X acceleration enabled on Mesa DRI Intel(R) HD Graphics 400 (BSW)
[ 10.369] (II) modeset(0): glamor initialized
[ 10.468] (II) modeset(0): Output DP-1 has no monitor section
[ 10.470] (II) modeset(0): Output HDMI-1 has no monitor section
[ 10.470] (II) modeset(0): Output DP-2 has no monitor section
[ 10.662] (II) modeset(0): Output HDMI-2 has no monitor section
[ 10.743] (II) modeset(0): Output DP-3 has no monitor section
[ 10.772] (II) modeset(0): Output HDMI-3 has no monitor section
[ 10.855] (II) modeset(0): EDID for output DP-1
[ 10.857] (II) modeset(0): EDID for output HDMI-1
[ 10.857] (II) modeset(0): EDID for output DP-2
[ 11.049] (II) modeset(0): EDID for output HDMI-2
[ 11.133] (II) modeset(0): EDID for output DP-3
[ 11.163] (II) modeset(0): EDID for output HDMI-3
[ 11.163] (II) modeset(0): Manufacturer: LEN Model: 62ae Serial#: 16843009
[ 11.163] (II) modeset(0): Year: 2021 Week: 21
[ 11.164] (II) modeset(0): EDID Version: 1.3
[ 11.164] (II) modeset(0): Digital Display Input
[ 11.164] (II) modeset(0): Max Image Size [cm]: horiz.: 53 vert.: 30
[ 11.164] (II) modeset(0): Gamma: 2.20
[ 11.164] (II) modeset(0): DPMS capabilities: Off
[ 11.164] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 11.164] (II) modeset(0): Default color space is primary color space
[ 11.164] (II) modeset(0): First detailed timing is preferred mode
[ 11.164] (II) modeset(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 11.164] (II) modeset(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 11.164] (II) modeset(0): Supported established timings:
[ 11.165] (II) modeset(0): 720x400@70Hz
[ 11.165] (II) modeset(0): 640x480@60Hz
[ 11.165] (II) modeset(0): 640x480@72Hz
[ 11.165] (II) modeset(0): 640x480@75Hz
[ 11.165] (II) modeset(0): 800x600@60Hz
[ 11.165] (II) modeset(0): 800x600@75Hz
[ 11.165] (II) modeset(0): 1024x768@60Hz
[ 11.165] (II) modeset(0): 1024x768@75Hz
[ 11.165] (II) modeset(0): 1280x1024@75Hz
[ 11.165] (II) modeset(0): Manufacturer's mask: 0
[ 11.165] (II) modeset(0): Supported standard timings:
[ 11.165] (II) modeset(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 11.165] (II) modeset(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 11.166] (II) modeset(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 11.166] (II) modeset(0): #3: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 11.166] (II) modeset(0): #4: hsize: 1600 vsize 900 refresh: 75 vid: 53161
[ 11.166] (II) modeset(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 11.166] (II) modeset(0): #6: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 11.166] (II) modeset(0): Supported detailed timing:
[ 11.166] (II) modeset(0): clock: 148.5 MHz Image Size: 527 x 296 mm
[ 11.166] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 11.166] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 11.166] (II) modeset(0): Ranges: V min: 48 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 185 MHz
[ 11.166] (II) modeset(0): Monitor name: S24e-20
[ 11.166] (II) modeset(0): Serial No: VNA657NL
[ 11.167] (II) modeset(0): Supported detailed timing:
[ 11.167] (II) modeset(0): clock: 174.5 MHz Image Size: 527 x 296 mm
[ 11.167] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 11.167] (II) modeset(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1119 v_border: 0
[ 11.167] (II) modeset(0): Supported detailed timing:
[ 11.167] (II) modeset(0): clock: 88.8 MHz Image Size: 527 x 296 mm
[ 11.167] (II) modeset(0): h_active: 1440 h_sync: 1488 h_sync_end 1520 h_blank_end 1600 h_border: 0
[ 11.167] (II) modeset(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 926 v_border: 0
[ 11.167] (II) modeset(0): Supported detailed timing:
[ 11.167] (II) modeset(0): clock: 119.0 MHz Image Size: 527 x 296 mm
[ 11.168] (II) modeset(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
[ 11.168] (II) modeset(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
[ 11.168] (II) modeset(0): Number of EDID sections to follow: 1
[ 11.168] (II) modeset(0): EDID (in hex):
[ 11.168] (II) modeset(0): 00ffffffffffff0030aeae6201010101
[ 11.168] (II) modeset(0): 151f010380351e782eee95a3544c9926
[ 11.168] (II) modeset(0): 0f5054ad4b00714f81809500a9c0a9cf
[ 11.168] (II) modeset(0): b300d1c00101023a801871382d40582c
[ 11.168] (II) modeset(0): 45000f282100001e000000fd00304b1e
[ 11.168] (II) modeset(0): 5312000a202020202020000000fc0053
[ 11.168] (II) modeset(0): 3234652d32300a2020202020000000ff
[ 11.168] (II) modeset(0): 00564e413635374e4c0a2020202001ca
[ 11.169] (II) modeset(0): 020327f14b901f051404131211030201
[ 11.169] (II) modeset(0): 230907078301000065030c001000681a
[ 11.169] (II) modeset(0): 00000101304be62a4480a07038274030
[ 11.169] (II) modeset(0): 2035000f282100001aab22a0a050841a
[ 11.169] (II) modeset(0): 30302036000f282100001a7c2e90a060
[ 11.169] (II) modeset(0): 1a1e40302036000f282100001a000000
[ 11.169] (II) modeset(0): 00000000000000000000000000000000
[ 11.169] (II) modeset(0): 00000000000000000000000000000008
[ 11.170] (II) modeset(0): Printing probed modes for output HDMI-3
[ 11.170] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 11.170] (II) modeset(0): Modeline "1920x1080"x75.0 174.50 1920 1968 2000 2080 1080 1083 1088 1119 +hsync -vsync (83.9 kHz e)
[ 11.170] (II) modeset(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 11.170] (II) modeset(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 11.170] (II) modeset(0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 11.170] (II) modeset(0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 11.170] (II) modeset(0): Modeline "1920x1080i"x59.9 74.18 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[ 11.170] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 11.170] (II) modeset(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz e)
[ 11.170] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 11.170] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 11.170] (II) modeset(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 11.170] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 11.170] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 11.170] (II) modeset(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 11.170] (II) modeset(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 11.170] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 11.170] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 11.170] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 11.170] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 11.170] (II) modeset(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 11.170] (II) modeset(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 11.170] (II) modeset(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 11.171] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 11.171] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 11.171] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 11.171] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 11.171] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 11.171] (II) modeset(0): Output DP-1 disconnected
[ 11.171] (II) modeset(0): Output HDMI-1 disconnected
[ 11.171] (II) modeset(0): Output DP-2 disconnected
[ 11.171] (II) modeset(0): Output HDMI-2 disconnected
[ 11.171] (II) modeset(0): Output DP-3 disconnected
[ 11.171] (II) modeset(0): Output HDMI-3 connected
[ 11.171] (II) modeset(0): Using exact sizes for initial modes
[ 11.171] (II) modeset(0): Output HDMI-3 using initial mode 1920x1080 +0+0
[ 11.171] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 11.171] (==) modeset(0): DPI set to (96, 96)
[ 11.171] (II) Loading sub module "fb"
[ 11.171] (II) LoadModule: "fb"
[ 11.171] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 11.173] (II) Module fb: vendor="X.Org Foundation"
[ 11.173] compiled for 1.20.11, module version = 1.0.0
[ 11.173] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11.173] (II) UnloadModule: "fbdev"
[ 11.173] (II) Unloading fbdev
[ 11.173] (II) UnloadSubModule: "fbdevhw"
[ 11.173] (II) Unloading fbdevhw
[ 11.173] (II) UnloadModule: "vesa"
[ 11.173] (II) Unloading vesa
[ 11.212] (==) modeset(0): Backing store enabled
[ 11.212] (==) modeset(0): Silken mouse enabled
[ 11.316] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 11.317] (==) modeset(0): DPMS enabled
[ 11.320] (II) modeset(0): [DRI2] Setup complete
[ 11.320] (II) modeset(0): [DRI2] DRI driver: i965
[ 11.320] (II) modeset(0): [DRI2] VDPAU driver: va_glRe: Mouse doesn't reach left edge of screen
Yes, I am aware it can be very long. The mouse-related items are usually much later in the file after the monitor-related items. There may not be any issues with it, but that was the only other idea I had.
A woman typing on a laptop with LM20.3 Cinnamon.
Re: Mouse doesn't reach left edge of screen
Ok, I found the parts about the mouse. It doesn't seem to indicate a warning, but I am not sure.
Code: Select all
[ 11.512] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 11.512] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 11.512] (II) LoadModule: "libinput"
[ 11.512] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 11.518] (II) Module libinput: vendor="X.Org Foundation"
[ 11.518] compiled for 1.20.4, module version = 0.29.0
[ 11.518] Module class: X.Org XInput Driver
[ 11.518] ABI class: X.Org XInput driver, version 24.1
[ 11.518] (II) Using input driver 'libinput' for 'Power Button'
[ 11.518] (**) Power Button: always reports core events
[ 11.518] (**) Option "Device" "/dev/input/event2"
[ 11.518] (**) Option "_source" "server/udev"
[ 11.527] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 11.528] (II) event2 - Power Button: device is a keyboard
[ 11.528] (II) event2 - Power Button: device removed
[ 11.550] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 11.550] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 11.550] (**) Option "xkb_model" "pc105"
[ 11.550] (**) Option "xkb_layout" "us"
[ 11.554] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 11.554] (II) event2 - Power Button: device is a keyboard
[ 11.557] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 11.557] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 11.557] (II) Using input driver 'libinput' for 'Video Bus'
[ 11.557] (**) Video Bus: always reports core events
[ 11.557] (**) Option "Device" "/dev/input/event4"
[ 11.557] (**) Option "_source" "server/udev"
[ 11.561] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 11.561] (II) event4 - Video Bus: device is a keyboard
[ 11.561] (II) event4 - Video Bus: device removed
[ 11.578] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[ 11.578] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 11.579] (**) Option "xkb_model" "pc105"
[ 11.579] (**) Option "xkb_layout" "us"
[ 11.587] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 11.588] (II) event4 - Video Bus: device is a keyboard
[ 11.590] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 11.590] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 11.590] (II) Using input driver 'libinput' for 'Power Button'
[ 11.590] (**) Power Button: always reports core events
[ 11.590] (**) Option "Device" "/dev/input/event0"
[ 11.590] (**) Option "_source" "server/udev"
[ 11.594] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 11.594] (II) event0 - Power Button: device is a keyboard
[ 11.594] (II) event0 - Power Button: device removed
[ 11.614] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 11.614] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 11.614] (**) Option "xkb_model" "pc105"
[ 11.615] (**) Option "xkb_layout" "us"
[ 11.622] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 11.622] (II) event0 - Power Button: device is a keyboard
[ 11.625] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 11.626] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 11.626] (II) Using input driver 'libinput' for 'Sleep Button'
[ 11.626] (**) Sleep Button: always reports core events
[ 11.626] (**) Option "Device" "/dev/input/event1"
[ 11.626] (**) Option "_source" "server/udev"
[ 11.630] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 11.630] (II) event1 - Sleep Button: device is a keyboard
[ 11.631] (II) event1 - Sleep Button: device removed
[ 11.650] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 11.650] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 11.651] (**) Option "xkb_model" "pc105"
[ 11.651] (**) Option "xkb_layout" "us"
[ 11.659] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 11.659] (II) event1 - Sleep Button: device is a keyboard
[ 11.665] (II) config/udev: Adding input device HID 04d9:1400 (/dev/input/event5)
[ 11.665] (**) HID 04d9:1400: Applying InputClass "libinput keyboard catchall"
[ 11.665] (II) Using input driver 'libinput' for 'HID 04d9:1400'
[ 11.665] (**) HID 04d9:1400: always reports core events
[ 11.665] (**) Option "Device" "/dev/input/event5"
[ 11.665] (**) Option "_source" "server/udev"
[ 11.671] (II) event5 - HID 04d9:1400: is tagged by udev as: Keyboard
[ 11.671] (II) event5 - HID 04d9:1400: device is a keyboard
[ 11.672] (II) event5 - HID 04d9:1400: device removed
[ 11.682] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:04D9:1400.0001/input/input5/event5"
[ 11.682] (II) XINPUT: Adding extended input device "HID 04d9:1400" (type: KEYBOARD, id 10)
[ 11.682] (**) Option "xkb_model" "pc105"
[ 11.683] (**) Option "xkb_layout" "us"
[ 11.691] (II) event5 - HID 04d9:1400: is tagged by udev as: Keyboard
[ 11.692] (II) event5 - HID 04d9:1400: device is a keyboard
[ 11.696] (II) config/udev: Adding input device HID 04d9:1400 Mouse (/dev/input/event6)
[ 11.696] (**) HID 04d9:1400 Mouse: Applying InputClass "libinput pointer catchall"
[ 11.696] (II) Using input driver 'libinput' for 'HID 04d9:1400 Mouse'
[ 11.696] (**) HID 04d9:1400 Mouse: always reports core events
[ 11.696] (**) Option "Device" "/dev/input/event6"
[ 11.696] (**) Option "_source" "server/udev"
[ 11.702] (II) event6 - HID 04d9:1400 Mouse: is tagged by udev as: Mouse
[ 11.703] (II) event6 - HID 04d9:1400 Mouse: device is a pointer
[ 11.703] (II) event6 - HID 04d9:1400 Mouse: device removed
[ 11.738] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:04D9:1400.0002/input/input6/event6"
[ 11.738] (II) XINPUT: Adding extended input device "HID 04d9:1400 Mouse" (type: MOUSE, id 11)
[ 11.740] (**) Option "AccelerationScheme" "none"
[ 11.740] (**) HID 04d9:1400 Mouse: (accel) selected scheme none/0
[ 11.741] (**) HID 04d9:1400 Mouse: (accel) acceleration factor: 2.000
[ 11.741] (**) HID 04d9:1400 Mouse: (accel) acceleration threshold: 4
[ 11.750] (II) event6 - HID 04d9:1400 Mouse: is tagged by udev as: Mouse
[ 11.751] (II) event6 - HID 04d9:1400 Mouse: device is a pointer
[ 11.754] (II) config/udev: Adding input device HID 04d9:1400 Mouse (/dev/input/mouse0)
[ 11.755] (II) No input driver specified, ignoring this device.
[ 11.755] (II) This device may have been added with another device file.
[ 11.757] (II) config/udev: Adding input device HID 04d9:1400 Consumer Control (/dev/input/event7)
[ 11.757] (**) HID 04d9:1400 Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 11.757] (II) Using input driver 'libinput' for 'HID 04d9:1400 Consumer Control'
[ 11.757] (**) HID 04d9:1400 Consumer Control: always reports core events
[ 11.757] (**) Option "Device" "/dev/input/event7"
[ 11.757] (**) Option "_source" "server/udev"
[ 11.762] (II) event7 - HID 04d9:1400 Consumer Control: is tagged by udev as: Keyboard
[ 11.763] (II) event7 - HID 04d9:1400 Consumer Control: device is a keyboard
[ 11.763] (II) event7 - HID 04d9:1400 Consumer Control: device removed
[ 11.782] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:04D9:1400.0002/input/input7/event7"
[ 11.782] (II) XINPUT: Adding extended input device "HID 04d9:1400 Consumer Control" (type: KEYBOARD, id 12)
[ 11.783] (**) Option "xkb_model" "pc105"
[ 11.783] (**) Option "xkb_layout" "us"
[ 11.796] (II) event7 - HID 04d9:1400 Consumer Control: is tagged by udev as: Keyboard
[ 11.796] (II) event7 - HID 04d9:1400 Consumer Control: device is a keyboard
[ 11.799] (II) config/udev: Adding input device HID 04d9:1400 System Control (/dev/input/event8)
[ 11.799] (**) HID 04d9:1400 System Control: Applying InputClass "libinput keyboard catchall"
[ 11.799] (II) Using input driver 'libinput' for 'HID 04d9:1400 System Control'
[ 11.799] (**) HID 04d9:1400 System Control: always reports core events
[ 11.799] (**) Option "Device" "/dev/input/event8"
[ 11.799] (**) Option "_source" "server/udev"
[ 11.804] (II) event8 - HID 04d9:1400 System Control: is tagged by udev as: Keyboard
[ 11.805] (II) event8 - HID 04d9:1400 System Control: device is a keyboard
[ 11.805] (II) event8 - HID 04d9:1400 System Control: device removed
[ 11.814] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:04D9:1400.0002/input/input8/event8"
[ 11.814] (II) XINPUT: Adding extended input device "HID 04d9:1400 System Control" (type: KEYBOARD, id 13)
[ 11.815] (**) Option "xkb_model" "pc105"
[ 11.815] (**) Option "xkb_layout" "us"
[ 11.834] (II) event8 - HID 04d9:1400 System Control: is tagged by udev as: Keyboard
[ 11.834] (II) event8 - HID 04d9:1400 System Control: device is a keyboard
[ 11.837] (II) config/udev: Adding input device Microsoft Microsoft IntelliMouse® Optical (/dev/input/event9)
[ 11.838] (**) Microsoft Microsoft IntelliMouse® Optical: Applying InputClass "libinput pointer catchall"
[ 11.838] (II) Using input driver 'libinput' for 'Microsoft Microsoft IntelliMouse® Optical'
[ 11.838] (**) Microsoft Microsoft IntelliMouse® Optical: always reports core events
[ 11.838] (**) Option "Device" "/dev/input/event9"
[ 11.838] (**) Option "_source" "server/udev"
[ 11.914] (II) event9 - Microsoft Microsoft IntelliMouse® Optical: is tagged by udev as: Mouse
[ 11.914] (II) event9 - Microsoft Microsoft IntelliMouse® Optical: device is a pointer
[ 11.915] (II) event9 - Microsoft Microsoft IntelliMouse® Optical: device removed
[ 11.950] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:045E:0039.0003/input/input9/event9"
[ 11.950] (II) XINPUT: Adding extended input device "Microsoft Microsoft IntelliMouse® Optical" (type: MOUSE, id 14)
[ 11.952] (**) Option "AccelerationScheme" "none"
[ 11.952] (**) Microsoft Microsoft IntelliMouse® Optical: (accel) selected scheme none/0
[ 11.952] (**) Microsoft Microsoft IntelliMouse® Optical: (accel) acceleration factor: 2.000
[ 11.952] (**) Microsoft Microsoft IntelliMouse® Optical: (accel) acceleration threshold: 4
[ 12.026] (II) event9 - Microsoft Microsoft IntelliMouse® Optical: is tagged by udev as: Mouse
[ 12.027] (II) event9 - Microsoft Microsoft IntelliMouse® Optical: device is a pointer
[ 12.030] (II) config/udev: Adding input device Microsoft Microsoft IntelliMouse® Optical (/dev/input/mouse1)
[ 12.030] (II) No input driver specified, ignoring this device.
[ 12.030] (II) This device may have been added with another device file.
[ 12.032] (II) config/udev: Adding input device Microsoft LifeCam VX-800: Micro (/dev/input/event10)
[ 12.032] (**) Microsoft LifeCam VX-800: Micro: Applying InputClass "libinput keyboard catchall"
[ 12.032] (II) Using input driver 'libinput' for 'Microsoft LifeCam VX-800: Micro'
[ 12.032] (**) Microsoft LifeCam VX-800: Micro: always reports core events
[ 12.032] (**) Option "Device" "/dev/input/event10"
[ 12.032] (**) Option "_source" "server/udev"
[ 12.036] (II) event10 - Microsoft LifeCam VX-800: Micro: is tagged by udev as: Keyboard
[ 12.036] (II) event10 - Microsoft LifeCam VX-800: Micro: device is a keyboard
[ 12.036] (II) event10 - Microsoft LifeCam VX-800: Micro: device removed
[ 12.058] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input10/event10"
[ 12.058] (II) XINPUT: Adding extended input device "Microsoft LifeCam VX-800: Micro" (type: KEYBOARD, id 15)
[ 12.058] (**) Option "xkb_model" "pc105"
[ 12.059] (**) Option "xkb_layout" "us"
[ 12.070] (II) event10 - Microsoft LifeCam VX-800: Micro: is tagged by udev as: Keyboard
[ 12.070] (II) event10 - Microsoft LifeCam VX-800: Micro: device is a keyboard
[ 12.072] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[ 12.072] (II) No input driver specified, ignoring this device.
[ 12.072] (II) This device may have been added with another device file.
[ 12.073] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[ 12.073] (II) No input driver specified, ignoring this device.
[ 12.073] (II) This device may have been added with another device file.
[ 12.075] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event13)
[ 12.075] (II) No input driver specified, ignoring this device.
[ 12.075] (II) This device may have been added with another device file.
[ 12.076] (II) config/udev: Adding input device AT Raw Set 2 keyboard (/dev/input/event3)
[ 12.076] (**) AT Raw Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 12.076] (II) Using input driver 'libinput' for 'AT Raw Set 2 keyboard'
[ 12.076] (**) AT Raw Set 2 keyboard: always reports core events
[ 12.076] (**) Option "Device" "/dev/input/event3"
[ 12.077] (**) Option "_source" "server/udev"
[ 12.080] (II) event3 - AT Raw Set 2 keyboard: is tagged by udev as: Keyboard
[ 12.080] (II) event3 - AT Raw Set 2 keyboard: device is a keyboard
[ 12.083] (II) event3 - AT Raw Set 2 keyboard: device removed
[ 12.110] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 12.110] (II) XINPUT: Adding extended input device "AT Raw Set 2 keyboard" (type: KEYBOARD, id 16)
[ 12.110] (**) Option "xkb_model" "pc105"
[ 12.110] (**) Option "xkb_layout" "us"
[ 12.116] (II) event3 - AT Raw Set 2 keyboard: is tagged by udev as: Keyboard
[ 12.116] (II) event3 - AT Raw Set 2 keyboard: device is a keyboard
[ 14.646] (II) modeset(0): EDID vendor "LEN", prod id 25262
[ 14.647] (II) modeset(0): Using EDID range info for horizontal sync
[ 14.647] (II) modeset(0): Using EDID range info for vertical refresh
[ 14.647] (II) modeset(0): Printing DDC gathered Modelines:
[ 14.647] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)Re: Mouse doesn't reach left edge of screen
I also do not see anything which might indicate an issue.
We'll have to see if anyone else has "mouse" ideas.
A woman typing on a laptop with LM20.3 Cinnamon.
Re: Mouse doesn't reach left edge of screen
Just now I did an experiment: I created and used a live-boot USB containing Linux Mint Mate, and another one containing Linux EndeavourOS.
The LInux Mint Mate session presented the mouse pointer with the same problematical behavior -- it could not reach the left edge of the screen.
However, when I booted the Linux EndeavourOS from the live USB, the mouse pointer behaved perfectly normally, reaching the left edge of the screen and fully able to select text positioned at the far left of the screen.
This experiment appears to demonstrate that the fault lies not with my mouse, screen, or computer, but with something in the Linux Mint software.
The LInux Mint Mate session presented the mouse pointer with the same problematical behavior -- it could not reach the left edge of the screen.
However, when I booted the Linux EndeavourOS from the live USB, the mouse pointer behaved perfectly normally, reaching the left edge of the screen and fully able to select text positioned at the far left of the screen.
This experiment appears to demonstrate that the fault lies not with my mouse, screen, or computer, but with something in the Linux Mint software.
Re: Mouse doesn't reach left edge of screen
You indicated in your initial post that you were able to select items on the far left and that the problem was just visual.
Are you now saying the problem is no longer visual and you can no longer select items on the far left?gemk65 wrote: ⤴Wed Oct 13, 2021 9:23 amMy mouse pointer does not visually reach the left edge of the screen. Logically the pointer functionality does reach the left edge, in the sense that it can select and copy text that extends to the left edge, but the pointer cannot be viewed performing this action; the displayed pointer stops about two millimeters "inland" from the border.
There are a significant number of software differences between EndeavourOS and Mint. If you really wanted to say Mint is the problem then a better comparison would have been to test an Ubuntu distro and not an Arch-based distro.
A woman typing on a laptop with LM20.3 Cinnamon.