Code: Select all
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 931.5G 0 disk
sdb 8:16 0 465.8G 0 disk
├─sdb1 8:17 0 953M 0 part /boot
├─sdb2 8:18 0 24.8G 0 part /
├─sdb3 8:19 0 7.8G 0 part [SWAP]
└─sdb4 8:20 0 432.2G 0 part /home
sr0 11:0 1 1024M 0 rom
sda is apparently my new drive, installed but nothing further done.
When I look at FSTAB (/etc/fstab - - gedit) I get:
Code: Select all
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=067258bb-4967-4f00-b6a5-379b038f389f / ext4 errors=remount-ro 0 1
# /boot was on /dev/sda1 during installation
UUID=243c5d8c-7fbe-4640-94e0-31654f08d855 /boot ext4 defaults 0 2
# /home was on /dev/sda4 during installation
UUID=856f7c0f-de45-4597-9595-f8d116084b11 /home ext4 defaults 0 2
# swap was on /dev/sda3 during installation
UUID=35fda864-d74d-4ddd-8285-995d8b603905 none swap sw 0 0