lsusb reports:
Bus 001 Device 002: ID 04a9:181e Canon, Inc.
I edited /lib/udev/rules.d/60-libsane.rules, adding the following lines:
# Canon PIXMA E410 Series 04a9:181e
ATTRS{idVendor}=="04a9", ATTRS{idProduct}=="181e", ENV{libsane_matched}="yes"
Then rebooted, and installed Xsane, which reports: "No devices available". It suggests:
- 1) There is no device supported by sane
2) Supported devices are busy
3) Permissions don't allow you to do it, try as root.
4) The backend is not loaded by SANE (man sane-dll) [ "No manual entry for sane-dll" ]
5) The backend is not configured properly (man sand-"backendname")
6) Possibly there is more than one SANE$ version installed
Thanks,
Sadhu