Samsung xpress M2625D and LM19

Forum rules
Before you post please read this
Post Reply
Allconius
Level 1
Level 1
Posts: 5
Joined: Wed Dec 26, 2018 8:45 am

Samsung xpress M2625D and LM19

Post by Allconius » Wed Dec 26, 2018 8:57 am

Hi,
i have printer Samsung xpress M2625D and i try install LM19 MATE 64b on new HDD. But printer not working after install. I installed driver from samsung web page - still not working. I try boot live LM19 from USB, but some - not work. I see printer in system, system show that print runing , but printer only make sound 1 sec that start but no print. On same HW on other HDD i have LM 17.3 MATE 64b and printer works perfect. Any idea ?
Thx
Michal

User avatar
ClixTrix
Level 6
Level 6
Posts: 1069
Joined: Wed Dec 09, 2015 11:40 am
Location: Columbus, Ohio, USA

Re: Samsung xpress M2625D and LM19

Post by ClixTrix » Wed Jan 02, 2019 12:10 pm

Samsung's printer division was bought-out by HP back in 2017.

Most current driver for Ubuntu is here.

https://support.hp.com/us-en/drivers/se ... l/16462837
Linux Mint 19.2 x64 Cinnamon 4.15.0-72-generic
Gigabyte GA-AB350M-D3H (F20) / Ryzen 5 1600 / Micron Ballistix Sport DDR4 2400 2x8GB / Sapphire Radeon HD6450
NVMe-SSD: Samsung 960 EVO 250GB / SATA-SSD: Samsung 850 EVO 250GB + Toshiba OCZ VX500 512GB

Allconius
Level 1
Level 1
Posts: 5
Joined: Wed Dec 26, 2018 8:45 am

Re: Samsung xpress M2625D and LM19

Post by Allconius » Sat Jan 05, 2019 5:47 am

................
10. Others
If you have any questions regarding this agreement and other products, please co
ntact SAMSUNG ELECTRONICS.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

**** Do you agree ? [y/n] : y
**** The same version of Print driver is already installed.
**** The same version of Scan driver is already installed.
**** Install finished.

Allconius
Level 1
Level 1
Posts: 5
Joined: Wed Dec 26, 2018 8:45 am

Re: Samsung xpress M2625D and LM19

Post by Allconius » Sun Jan 06, 2019 5:13 am

http://localhost:631/admin/log/access_log? :
localhost - - [06/Jan/2019:10:06:11 +0100] "POST / HTTP/1.1" 200 349 Create-Printer-Subscriptions successful-ok
localhost - - [06/Jan/2019:10:06:11 +0100] "POST / HTTP/1.1" 200 176 Create-Printer-Subscriptions successful-ok
localhost - - [06/Jan/2019:10:06:31 +0100] "POST /admin/ HTTP/1.1" 200 62 - -
localhost - - [06/Jan/2019:10:06:31 +0100] "POST /admin/ HTTP/1.1" 200 15730 - -
localhost - - [06/Jan/2019:10:07:16 +0100] "POST /printers/M262x-282x-Series HTTP/1.1" 200 223 Create-Job successful-ok
localhost - - [06/Jan/2019:10:07:16 +0100] "POST /printers/M262x-282x-Series HTTP/1.1" 200 7177 Send-Document successful-ok
localhost - - [06/Jan/2019:10:07:17 +0100] "POST / HTTP/1.1" 200 364 Create-Printer-Subscriptions successful-ok

but no print :oops:

User avatar
ClixTrix
Level 6
Level 6
Posts: 1069
Joined: Wed Dec 09, 2015 11:40 am
Location: Columbus, Ohio, USA

Re: Samsung xpress M2625D and LM19

Post by ClixTrix » Sun Jan 06, 2019 10:11 am

Please run the following command from Terminal and post back the results.

Code: Select all

lpstat -t
Linux Mint 19.2 x64 Cinnamon 4.15.0-72-generic
Gigabyte GA-AB350M-D3H (F20) / Ryzen 5 1600 / Micron Ballistix Sport DDR4 2400 2x8GB / Sapphire Radeon HD6450
NVMe-SSD: Samsung 960 EVO 250GB / SATA-SSD: Samsung 850 EVO 250GB + Toshiba OCZ VX500 512GB

User avatar
ClixTrix
Level 6
Level 6
Posts: 1069
Joined: Wed Dec 09, 2015 11:40 am
Location: Columbus, Ohio, USA

Re: Samsung xpress M2625D and LM19

Post by ClixTrix » Sun Jan 06, 2019 12:00 pm

I have a Samsung Xpress M2020W that I picked up a few months back and remember installing for a test via wifi (back on old Mint 18.3) and then reboxed. It's going to my grandson, eventually.

I just got that printer out for a test with Mint 19 (never installed to this OS/machine...one in my sig running Cinnamon) and it was immediately detected and installed without install of the driver. Did a print test from Printers and it printed OK. It automatically installed port 631 IPP, which is fairly normal with following URI.

ipp://SEC8425191418C9.local:631/ipp/print

Technically, it should use the same universal driver from HP/Samsung, as the M2625D. I will install the driver on a test machine running 19.1 and report back.

Edit:

From a Mint 19.1 Cinnamon test machine.....

I was successful in installing the driver with "sudo bash install.sh" from the ULD directory created from extract of the downloaded gz. Long page on license and said yes to install and firewall.

Was able to install the printer with jetDirect and LDP. Note, ipp reports as driverless on manual attempt to install with that mode.

Only problem I encountered was a bug in locking the screen in Printers when attempting to use Change (which I believe is a reported bug in 19.1). I just deleted and added the printer for my tests. Also, on reboot it automatically detects and reinstalls the printer as ipp, even with it installed in one of the other modes.

Didn't try USB.

Edit2:

I was able to login to the printer's SyncThru Web Service console and did some looking. There is a way to disable ipp (and the other two protocols) in my machine. Note, the default ID and password are admin/sec00000.

http://www.samsungsetup.com/ts/manual/S ... DIBFBI.htm

Edit3: OK.....started the same Mint 19.1 Cinnamon test machine with my M2020W Printer connected USB. Printer automatically installed and prints from Printers app. Deleted the printer from Printers and re-Added. Same results. Note, that's the same machine I installed the driver too.
Linux Mint 19.2 x64 Cinnamon 4.15.0-72-generic
Gigabyte GA-AB350M-D3H (F20) / Ryzen 5 1600 / Micron Ballistix Sport DDR4 2400 2x8GB / Sapphire Radeon HD6450
NVMe-SSD: Samsung 960 EVO 250GB / SATA-SSD: Samsung 850 EVO 250GB + Toshiba OCZ VX500 512GB

OceanMan7
Level 1
Level 1
Posts: 12
Joined: Wed Jun 15, 2011 1:31 pm

Re: Samsung xpress M2625D and LM19 - SOLVED

Post by OceanMan7 » Tue Jan 08, 2019 4:30 pm

Hello,

I'd been having a similar problem with printing to a Samsung M2835DW under 19.1. After getting the Samsung driver installed, everything worked except the java-based application, Moneydance, which hung the whole GUI when I tried to print. I had installed 18.3 in another partition to restore printing (no problems with that version) and was just starting to trace my Moneydance problem when I installed the new version of Cinnamon that was pushed today.

Today's new version of Cinnamon solved all remaining problems.

Thanks to the developers and gurus hovering over this list!

Allconius
Level 1
Level 1
Posts: 5
Joined: Wed Dec 26, 2018 8:45 am

Re: Samsung xpress M2625D and LM19

Post by Allconius » Sat Jan 19, 2019 2:14 am

Hi,

after upgrade to 19.1 MATE I have same problem.

Code: Select all

michal@michal-MS-7758 ~ $ lpstat -t
scheduler is running
system default destination: M262x-282x-Series
device for Deskjet-F2400-series: hp:/usb/Deskjet_F2400_series?serial=CN9AH120P305H4
device for M262x-282x-Series: usb://Samsung/M262x%20282x%20Series?serial=ZEB2B8GJ2B004EK
Deskjet-F2400-series accepting requests since Út 25. prosince 2018, 18:54:31 CET
M262x-282x-Series accepting requests since Út 25. prosince 2018, 15:46:02 CET
printer Deskjet-F2400-series is idle.  enabled since Út 25. prosince 2018, 18:54:31 CET
printer M262x-282x-Series is idle.  enabled since Út 25. prosince 2018, 15:46:02 CET
michal@michal-MS-7758 ~ $ 

Allconius
Level 1
Level 1
Posts: 5
Joined: Wed Dec 26, 2018 8:45 am

Re: Samsung xpress M2625D and LM19

Post by Allconius » Sat Jan 19, 2019 2:25 am

Wooow I solved my problem deleted the printer from Printers and re-Added :D Thx a lot !

Rtep
Level 3
Level 3
Posts: 169
Joined: Sun Sep 04, 2016 2:57 pm

Re: Samsung xpress M2625D and LM19

Post by Rtep » Thu Jan 24, 2019 1:38 pm

Is scanner working also?

Post Reply

Return to “Printers & Scanners”