Lenovo IdeaPad 320 touch pad not working
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
-
nobodyknose
Lenovo IdeaPad 320 touch pad not working
I have Linux kernel 4.15.0-43-generic, Linux Mint 19.1 installed on my Lenovo IdeaPad 320 and the touch pad is not working. I have tried all of the solutions that I could find via Google, all with no luck. Can anyone suggest a different solution?
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 1 time in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Re: Lenovo IdeaPad 320 touch pad not working
Post results from terminal for
Code: Select all
dmesg | grep -i elan
-
nobodyknose
Re: Lenovo IdeaPad 320 touch pad not working
Thanks, Jeremy. I'm new to Linux, so I want to confirm: Run the instruction "dmesg | grep -i elan" in the terminal app?
Re: Lenovo IdeaPad 320 touch pad not working
Hello,
I have a Lenovo Ideapad 530s ryzen 7. The touchpad did not work for 19.1. I read that this
will work in a terminal: sudo apt-get install xserver-xorg-input-synaptics . Reboot after this
and hopefully it will work.
Good fortune,
Marcia
I have a Lenovo Ideapad 530s ryzen 7. The touchpad did not work for 19.1. I read that this
will work in a terminal: sudo apt-get install xserver-xorg-input-synaptics . Reboot after this
and hopefully it will work.
Good fortune,
Marcia
Re: Lenovo IdeaPad 320 touch pad not working
Yesnobodyknose wrote: ⤴Wed Jan 09, 2019 5:16 pm Thanks, Jeremy. I'm new to Linux, so I want to confirm: Run the instruction "dmesg | grep -i elan" in the terminal app?
-
nobodyknose
Re: Lenovo IdeaPad 320 touch pad not working
Thanks. I could get result for dmseg (below) but not grep -i elan.
Code: Select all
[ 0.000000] Linux version 4.15.0-43-generic (buildd@lgw01-amd64-001) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #46-Ubuntu SMP Thu Dec 6 14:45:28 UTC 2018 (Ubuntu 4.15.0-43.46-generic 4.15.18)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-43-generic root=UUID=bc29a7ad-262e-4400-be6b-46698863329a ro quiet splash vt.handoff=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[3]: 576, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 640, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000012151000-0x0000000067b4ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000067b50000-0x0000000067b50fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000067b51000-0x0000000067b6afff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000067b6b000-0x0000000067ba6fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000067ba7000-0x0000000068ba6fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000068ba7000-0x000000007822efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007822f000-0x000000007aebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007aebf000-0x000000007afbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007afbf000-0x000000007affefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007afff000-0x000000007affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007b000000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe042000-0x00000000fe044fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe900000-0x00000000fe902fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.0 present.
[ 0.000000] DMI: LENOVO 80XR/LNVNB161216, BIOS 5RCN36WW 08/06/2018
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F80000000 write-back
[ 0.000000] 1 base 007C000000 mask 7FFC000000 uncachable
[ 0.000000] 2 base 007B000000 mask 7FFF000000 uncachable
[ 0.000000] 3 base 0100000000 mask 7F00000000 write-back
[ 0.000000] 4 base 0200000000 mask 7F80000000 write-back
[ 0.000000] 5 base 00FFC00000 mask 70FFC00000 write-combining
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0x7b000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x25053f000, 0x25053ffff] PGTABLE
[ 0.000000] BRK [0x250540000, 0x250540fff] PGTABLE
[ 0.000000] BRK [0x250541000, 0x250541fff] PGTABLE
[ 0.000000] BRK [0x250542000, 0x250542fff] PGTABLE
[ 0.000000] BRK [0x250543000, 0x250543fff] PGTABLE
[ 0.000000] BRK [0x250544000, 0x250544fff] PGTABLE
[ 0.000000] BRK [0x250545000, 0x250545fff] PGTABLE
[ 0.000000] BRK [0x250546000, 0x250546fff] PGTABLE
[ 0.000000] BRK [0x250547000, 0x250547fff] PGTABLE
[ 0.000000] BRK [0x250548000, 0x250548fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x30e65000-0x34729fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x000000007AFDF188 0000CC (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 0x000000007AFF6000 000114 (v06 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x000000007AFE9000 007E55 (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x000000007AFB0000 000040
[ 0.000000] ACPI: FACS 0x000000007AFB0000 000040
[ 0.000000] ACPI: UEFI 0x000000007AFFD000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MSDM 0x000000007AFFC000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BDAT 0x000000007AFFB000 000030 (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x000000007AFFA000 000042 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DBG2 0x000000007AFF9000 000072 (v00 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DBGP 0x000000007AFF8000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 0x000000007AFF5000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: LPIT 0x000000007AFF4000 00005C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x000000007AFF3000 000084 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x000000007AFF2000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: NPKT 0x000000007AFF1000 000065 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000007AFE8000 0002AF (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000007AFE7000 0003DF (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000007AFE6000 00072B (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000007AFE5000 00032D (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000007AFE4000 00017C (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000007AFE1000 002701 (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0x000000007AFE0000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: WDAT 0x000000007AFF7000 000104 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: NHLT 0x000000007AFDE000 00002D (v00 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x27ffd5000-0x27fffffff]
[ 0.000000] tsc: Using PIT calibration value
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000000fffffff]
[ 0.000000] node 0: [mem 0x0000000012151000-0x0000000067b4ffff]
[ 0.000000] node 0: [mem 0x0000000067b6b000-0x0000000067ba6fff]
[ 0.000000] node 0: [mem 0x0000000068ba7000-0x000000007822efff]
[ 0.000000] node 0: [mem 0x000000007afff000-0x000000007affffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000027fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
[ 0.000000] On node 0 totalpages: 2052193
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7428 pages used for memmap
[ 0.000000] DMA32 zone: 475332 pages, LIFO batch:31
[ 0.000000] Normal zone: 24576 pages used for memmap
[ 0.000000] Normal zone: 1572864 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 99 pages
[ 0.000000] Reserving Intel graphics memory at 0x000000007c000000-0x000000007fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x10000000-0x12150fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x67b50000-0x67b50fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x67b51000-0x67b6afff]
[ 0.000000] PM: Registered nosave memory: [mem 0x67ba7000-0x68ba6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7822f000-0x7aebefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7aebf000-0x7afbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7afbf000-0x7affefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b000000-0x7fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xd0ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd1000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe4000000-0xfe041fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe042000-0xfe044fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe045000-0xfe8fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe900000-0xfe902fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe903000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[ 0.000000] e820: [mem 0x80000000-0xcfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2020104
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-43-generic root=UUID=bc29a7ad-262e-4400-be6b-46698863329a ro quiet splash vt.handoff=1
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7924616K/8208772K available (12300K kernel code, 2472K rwdata, 4252K rodata, 2408K init, 2416K bss, 284156K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 39186 entries in 154 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[ 0.000000] vt handoff: transparent VT on vt#1
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 7 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
[ 0.000000] hpet clockevent registered
[ 0.004000] APIC: Switch to symmetric I/O mode setup
[ 0.004000] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.008000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.032000] tsc: PIT calibration matches HPET. 1 loops
[ 0.032000] tsc: Detected 1094.446 MHz processor
[ 0.032000] tsc: Detected 1094.400 MHz TSC
[ 0.032000] Calibrating delay loop (skipped), value calculated using timer frequency.. 2188.80 BogoMIPS (lpj=4377600)
[ 0.032000] pid_max: default: 32768 minimum: 301
[ 0.032000] Security Framework initialized
[ 0.032000] Yama: becoming mindful.
[ 0.032000] AppArmor: AppArmor initialized
[ 0.038156] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.039851] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.039950] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.040035] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.040668] mce: CPU supports 7 MCE banks
[ 0.040709] CPU0: Thermal monitoring enabled (TM1)
[ 0.040790] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[ 0.040792] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.040797] Spectre V2 : Mitigation: Full generic retpoline
[ 0.040798] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.040800] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.040802] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.060478] Freeing SMP alternatives memory: 36K
[ 0.064230] TSC deadline timer enabled
[ 0.064241] smpboot: CPU0: Intel(R) Celeron(R) CPU N3350 @ 1.10GHz (family: 0x6, model: 0x5c, stepping: 0x9)
[ 0.064477] Performance Events: PEBS fmt3+, Goldmont events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.064518] ... version: 4
[ 0.064519] ... bit width: 48
[ 0.064521] ... generic registers: 4
[ 0.064523] ... value mask: 0000ffffffffffff
[ 0.064524] ... max period: 00007fffffffffff
[ 0.064526] ... fixed-purpose events: 3
[ 0.064527] ... event mask: 000000070000000f
[ 0.064634] Hierarchical SRCU implementation.
[ 0.066836] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.066884] smp: Bringing up secondary CPUs ...
[ 0.067219] x86: Booting SMP configuration:
[ 0.067223] .... node #0, CPUs: #1
[ 0.068522] smp: Brought up 1 node, 2 CPUs
[ 0.068522] smpboot: Max logical packages: 2
[ 0.068522] smpboot: Total of 2 processors activated (4377.60 BogoMIPS)
[ 0.070287] devtmpfs: initialized
[ 0.070287] x86/mm: Memory block size: 128MB
[ 0.073457] evm: security.selinux
[ 0.073460] evm: security.SMACK64
[ 0.073461] evm: security.SMACK64EXEC
[ 0.073462] evm: security.SMACK64TRANSMUTE
[ 0.073464] evm: security.SMACK64MMAP
[ 0.073465] evm: security.apparmor
[ 0.073467] evm: security.ima
[ 0.073468] evm: security.capability
[ 0.073550] PM: Registering ACPI NVS region [mem 0x67b50000-0x67b50fff] (4096 bytes)
[ 0.073550] PM: Registering ACPI NVS region [mem 0x67ba7000-0x68ba6fff] (16777216 bytes)
[ 0.073550] PM: Registering ACPI NVS region [mem 0x7aebf000-0x7afbefff] (1048576 bytes)
[ 0.073550] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.073550] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.073550] pinctrl core: initialized pinctrl subsystem
[ 0.073550] RTC time: 0:21:23, date: 01/10/19
[ 0.077654] NET: Registered protocol family 16
[ 0.077904] audit: initializing netlink subsys (disabled)
[ 0.077965] audit: type=2000 audit(1547079683.076:1): state=initialized audit_enabled=0 res=1
[ 0.077965] cpuidle: using governor ladder
[ 0.077965] cpuidle: using governor menu
[ 0.077965] ACPI: bus type PCI registered
[ 0.077965] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.077965] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.077965] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.077965] PCI: Using configuration type 1 for base access
[ 0.077965] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.077965] mtrr: probably your BIOS does not setup all CPUs.
[ 0.077965] mtrr: corrected configuration.
[ 0.082447] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.082447] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.082447] ACPI: Added _OSI(Module Device)
[ 0.082447] ACPI: Added _OSI(Processor Device)
[ 0.082447] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.082447] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.082447] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.082447] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.084275] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.102549] ACPI: Dynamic OEM Table Load:
[ 0.102570] ACPI: SSDT 0xFFFF99B0F5CEE200 000102 (v02 PmRef Cpu0Cst 00003001 INTL 20121220)
[ 0.104120] ACPI: Dynamic OEM Table Load:
[ 0.104138] ACPI: SSDT 0xFFFF99B0F5CEEA00 00015F (v02 PmRef ApIst 00003000 INTL 20121220)
[ 0.104977] ACPI: Dynamic OEM Table Load:
[ 0.104993] ACPI: SSDT 0xFFFF99B0F5CABC00 00008D (v02 PmRef ApCst 00003000 INTL 20121220)
[ 0.106362] ACPI: EC: EC started
[ 0.106364] ACPI: EC: interrupt blocked
[ 0.109610] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.109615] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x2b, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.109620] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 0.109621] ACPI: Interpreter enabled
[ 0.109693] ACPI: (supports S0 S3 S4 S5)
[ 0.109696] ACPI: Using IOAPIC for interrupt routing
[ 0.109796] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.110656] ACPI: GPE 0x0F active on init
[ 0.110752] ACPI: Enabled 9 GPEs in block 00 to 7F
[ 0.140259] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.140276] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.143345] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.143389] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.145890] PCI host bridge to bus 0000:00
[ 0.145897] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
[ 0.145901] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
[ 0.145905] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
[ 0.145909] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.145913] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.145923] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.145927] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[ 0.145931] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window]
[ 0.145935] pci_bus 0000:00: root bus resource [mem 0x7b800001-0x7bffffff window]
[ 0.145938] pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window]
[ 0.145942] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
[ 0.145946] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.145970] pci 0000:00:00.0: [8086:5af0] type 00 class 0x060000
[ 0.146854] pci 0000:00:02.0: [8086:5a85] type 00 class 0x030000
[ 0.146883] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[ 0.146899] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.146910] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.147841] pci 0000:00:0e.0: [8086:5a98] type 00 class 0x040380
[ 0.147887] pci 0000:00:0e.0: reg 0x10: [mem 0x91410000-0x91413fff 64bit]
[ 0.147934] pci 0000:00:0e.0: reg 0x20: [mem 0x91100000-0x911fffff 64bit]
[ 0.148043] pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
[ 0.148944] pci 0000:00:0f.0: [8086:5a9a] type 00 class 0x078000
[ 0.148997] pci 0000:00:0f.0: reg 0x10: [mem 0x91416000-0x91416fff 64bit]
[ 0.149156] pci 0000:00:0f.0: PME# supported from D3hot
[ 0.149898] pci 0000:00:0f.1: [8086:5a9c] type 00 class 0x078000
[ 0.149951] pci 0000:00:0f.1: reg 0x10: [mem 0x91417000-0x91417fff 64bit]
[ 0.150110] pci 0000:00:0f.1: PME# supported from D3hot
[ 0.150844] pci 0000:00:0f.2: [8086:5a9e] type 00 class 0x078000
[ 0.150897] pci 0000:00:0f.2: reg 0x10: [mem 0x91418000-0x91418fff 64bit]
[ 0.151056] pci 0000:00:0f.2: PME# supported from D3hot
[ 0.151803] pci 0000:00:12.0: [8086:5ae3] type 00 class 0x010601
[ 0.151833] pci 0000:00:12.0: reg 0x10: [mem 0x91414000-0x91415fff]
[ 0.151846] pci 0000:00:12.0: reg 0x14: [mem 0x9141d000-0x9141d0ff]
[ 0.151858] pci 0000:00:12.0: reg 0x18: [io 0x3080-0x3087]
[ 0.151870] pci 0000:00:12.0: reg 0x1c: [io 0x3088-0x308b]
[ 0.151883] pci 0000:00:12.0: reg 0x20: [io 0x3060-0x307f]
[ 0.151896] pci 0000:00:12.0: reg 0x24: [mem 0x9141b000-0x9141b7ff]
[ 0.151957] pci 0000:00:12.0: PME# supported from D3hot
[ 0.152707] pci 0000:00:13.0: [8086:5ad8] type 01 class 0x060400
[ 0.152851] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
[ 0.153650] pci 0000:00:14.0: [8086:5ad6] type 01 class 0x060400
[ 0.153761] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
[ 0.154512] pci 0000:00:14.1: [8086:5ad7] type 01 class 0x060400
[ 0.154626] pci 0000:00:14.1: PME# supported from D0 D3hot D3cold
[ 0.155411] pci 0000:00:15.0: [8086:5aa8] type 00 class 0x0c0330
[ 0.155450] pci 0000:00:15.0: reg 0x10: [mem 0x91400000-0x9140ffff 64bit]
[ 0.155544] pci 0000:00:15.0: PME# supported from D3hot D3cold
[ 0.156323] pci 0000:00:17.0: [8086:5ab4] type 00 class 0x118000
[ 0.156365] pci 0000:00:17.0: reg 0x10: [mem 0x91419000-0x91419fff 64bit]
[ 0.156383] pci 0000:00:17.0: reg 0x18: [mem 0x9141a000-0x9141afff 64bit]
[ 0.157253] pci 0000:00:1f.0: [8086:5ae8] type 00 class 0x060100
[ 0.158150] pci 0000:00:1f.1: [8086:5ad4] type 00 class 0x0c0500
[ 0.158226] pci 0000:00:1f.1: reg 0x10: [mem 0x9141c000-0x9141c0ff 64bit]
[ 0.158309] pci 0000:00:1f.1: reg 0x20: [io 0x3040-0x305f]
[ 0.159246] pci 0000:00:13.0: PCI bridge to [bus 01]
[ 0.159435] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
[ 0.159505] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.159557] pci 0000:02:00.0: reg 0x18: [mem 0x91300000-0x91300fff 64bit]
[ 0.159592] pci 0000:02:00.0: reg 0x20: [mem 0x91000000-0x91003fff 64bit pref]
[ 0.159639] pci 0000:02:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
[ 0.159848] pci 0000:02:00.0: supports D1 D2
[ 0.159852] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.172085] pci 0000:00:14.0: PCI bridge to [bus 02]
[ 0.172092] pci 0000:00:14.0: bridge window [io 0x2000-0x2fff]
[ 0.172098] pci 0000:00:14.0: bridge window [mem 0x91300000-0x913fffff]
[ 0.172107] pci 0000:00:14.0: bridge window [mem 0x91000000-0x910fffff 64bit pref]
[ 0.172264] pci 0000:03:00.0: [10ec:8821] type 00 class 0x028000
[ 0.172332] pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.172393] pci 0000:03:00.0: reg 0x18: [mem 0x91200000-0x91203fff 64bit]
[ 0.172473] pci 0000:03:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
[ 0.172635] pci 0000:03:00.0: supports D1 D2
[ 0.172639] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.184082] pci 0000:00:14.1: PCI bridge to [bus 03]
[ 0.184089] pci 0000:00:14.1: bridge window [io 0x1000-0x1fff]
[ 0.184096] pci 0000:00:14.1: bridge window [mem 0x91200000-0x912fffff]
[ 0.186797] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[ 0.187068] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[ 0.187337] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[ 0.187606] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[ 0.187875] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[ 0.188156] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[ 0.188423] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[ 0.188692] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[ 0.190430] ACPI: EC: interrupt unblocked
[ 0.190473] ACPI: EC: event unblocked
[ 0.190504] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x2b, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.190508] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.191128] SCSI subsystem initialized
[ 0.191236] libata version 3.00 loaded.
[ 0.191236] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.191236] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.191236] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.191236] vgaarb: loaded
[ 0.191236] ACPI: bus type USB registered
[ 0.191236] usbcore: registered new interface driver usbfs
[ 0.191236] usbcore: registered new interface driver hub
[ 0.191236] usbcore: registered new device driver usb
[ 0.191236] EDAC MC: Ver: 3.0.0
[ 0.192065] PCI: Using ACPI for IRQ routing
[ 0.198930] PCI: pci_cache_line_size set to 64 bytes
[ 0.199051] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.199055] e820: reserve RAM buffer [mem 0x67b50000-0x67ffffff]
[ 0.199057] e820: reserve RAM buffer [mem 0x67ba7000-0x67ffffff]
[ 0.199060] e820: reserve RAM buffer [mem 0x7822f000-0x7bffffff]
[ 0.199063] e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff]
[ 0.199316] NetLabel: Initializing
[ 0.199319] NetLabel: domain hash size = 128
[ 0.199320] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.199354] NetLabel: unlabeled traffic allowed by default
[ 0.200675] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.200693] hpet0: 8 comparators, 64-bit 19.200000 MHz counter
[ 0.202788] clocksource: Switched to clocksource hpet
[ 0.233823] VFS: Disk quotas dquot_6.6.0
[ 0.233868] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.234176] AppArmor: AppArmor Filesystem Enabled
[ 0.234250] pnp: PnP ACPI init
[ 0.235994] pnp 00:00: disabling [io 0x164e-0x164f] because it overlaps 0000:00:14.1 BAR 13 [io 0x1000-0x1fff]
[ 0.236132] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.236138] system 00:00: [io 0x0400-0x047f] could not be reserved
[ 0.236142] system 00:00: [io 0x0500-0x05fe] has been reserved
[ 0.236146] system 00:00: [io 0x0600-0x061f] has been reserved
[ 0.236163] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.236290] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.236917] system 00:02: [mem 0xe0000000-0xefffffff] could not be reserved
[ 0.236922] system 00:02: [mem 0xfea00000-0xfeafffff] has been reserved
[ 0.236926] system 00:02: [mem 0xfed01000-0xfed01fff] has been reserved
[ 0.236930] system 00:02: [mem 0xfed03000-0xfed03fff] has been reserved
[ 0.236935] system 00:02: [mem 0xfed06000-0xfed06fff] has been reserved
[ 0.236939] system 00:02: [mem 0xfed08000-0xfed09fff] has been reserved
[ 0.236943] system 00:02: [mem 0xfed80000-0xfedbffff] has been reserved
[ 0.236947] system 00:02: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 0.236952] system 00:02: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.236965] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.237846] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.238133] pnp: PnP ACPI: found 4 devices
[ 0.251037] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.251094] pci 0000:00:13.0: PCI bridge to [bus 01]
[ 0.251118] pci 0000:00:14.0: PCI bridge to [bus 02]
[ 0.251123] pci 0000:00:14.0: bridge window [io 0x2000-0x2fff]
[ 0.251131] pci 0000:00:14.0: bridge window [mem 0x91300000-0x913fffff]
[ 0.251137] pci 0000:00:14.0: bridge window [mem 0x91000000-0x910fffff 64bit pref]
[ 0.251146] pci 0000:00:14.1: PCI bridge to [bus 03]
[ 0.251151] pci 0000:00:14.1: bridge window [io 0x1000-0x1fff]
[ 0.251158] pci 0000:00:14.1: bridge window [mem 0x91200000-0x912fffff]
[ 0.251170] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
[ 0.251175] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
[ 0.251179] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
[ 0.251183] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.251187] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.251191] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.251195] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[ 0.251199] pci_bus 0000:00: resource 11 [mem 0x7c000001-0x7fffffff window]
[ 0.251203] pci_bus 0000:00: resource 12 [mem 0x7b800001-0x7bffffff window]
[ 0.251206] pci_bus 0000:00: resource 13 [mem 0x80000000-0xcfffffff window]
[ 0.251210] pci_bus 0000:00: resource 14 [mem 0xe0000000-0xefffffff window]
[ 0.251215] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.251219] pci_bus 0000:02: resource 1 [mem 0x91300000-0x913fffff]
[ 0.251223] pci_bus 0000:02: resource 2 [mem 0x91000000-0x910fffff 64bit pref]
[ 0.251227] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.251231] pci_bus 0000:03: resource 1 [mem 0x91200000-0x912fffff]
[ 0.251576] NET: Registered protocol family 2
[ 0.252211] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.252741] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.253458] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.253596] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.253746] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.253990] NET: Registered protocol family 1
[ 0.254035] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 1.422881] pci 0000:00:15.0: xHCI BIOS handoff failed (BIOS bug ?) 00012201
[ 1.423184] PCI: CLS 64 bytes, default 64
[ 1.423296] Unpacking initramfs...
[ 3.686314] Freeing initrd memory: 58132K
[ 3.686390] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.686400] software IO TLB [mem 0x7422f000-0x7822f000] (64MB) mapped at [ (ptrval)- (ptrval)]
[ 3.686504] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xfc66f4fc7c, max_idle_ns: 440795224246 ns
[ 3.686546] clocksource: Switched to clocksource tsc
[ 3.686705] Scanning for low memory corruption every 60 seconds
[ 3.688317] Initialise system trusted keyrings
[ 3.688340] Key type blacklist registered
[ 3.688424] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 3.691720] zbud: loaded
[ 3.693086] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 3.693469] fuse init (API version 7.26)
[ 3.697359] Key type asymmetric registered
[ 3.697362] Asymmetric key parser 'x509' registered
[ 3.697455] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 3.697536] io scheduler noop registered
[ 3.697539] io scheduler deadline registered
[ 3.697621] io scheduler cfq registered (default)
[ 3.699395] pcieport 0000:00:13.0: Signaling PME with IRQ 120
[ 3.699478] pcieport 0000:00:14.0: Signaling PME with IRQ 121
[ 3.699528] pcieport 0000:00:14.1: Signaling PME with IRQ 122
[ 3.699713] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[ 3.699715] vesafb: scrolling: redraw
[ 3.699720] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 3.699748] vesafb: framebuffer at 0x80000000, mapped to 0x (ptrval), using 4160k, total 4160k
[ 3.700032] Console: switching to colour frame buffer device 170x48
[ 3.700083] fb0: VESA VGA frame buffer device
[ 3.700125] intel_idle: MWAIT substates: 0x11242020
[ 3.700127] intel_idle: v0.4.1 model 0x5C
[ 3.700399] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 3.701350] ACPI: AC Adapter [ADP0] (on-line)
[ 3.701560] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 3.701576] ACPI: Lid Switch [LID0]
[ 3.701666] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 3.701688] ACPI: Power Button [PWRB]
[ 3.705876] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 3.718535] Linux agpgart interface v0.103
[ 3.723959] loop: module loaded
[ 3.724595] libphy: Fixed MDIO Bus: probed
[ 3.724598] tun: Universal TUN/TAP device driver, 1.6
[ 3.724907] PPP generic driver version 2.4.2
[ 3.725088] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.725095] ehci-pci: EHCI PCI platform driver
[ 3.725172] ehci-platform: EHCI generic platform driver
[ 3.725195] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.725200] ohci-pci: OHCI PCI platform driver
[ 3.725225] ohci-platform: OHCI generic platform driver
[ 3.725240] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.725965] xhci_hcd 0000:00:15.0: xHCI Host Controller
[ 3.726022] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
[ 3.727336] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810
[ 3.727348] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
[ 3.727921] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.727925] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.727929] usb usb1: Product: xHCI Host Controller
[ 3.727933] usb usb1: Manufacturer: Linux 4.15.0-43-generic xhci-hcd
[ 3.727936] usb usb1: SerialNumber: 0000:00:15.0
[ 3.728356] hub 1-0:1.0: USB hub found
[ 3.728380] hub 1-0:1.0: 8 ports detected
[ 3.730611] xhci_hcd 0000:00:15.0: xHCI Host Controller
[ 3.730621] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
[ 3.730629] xhci_hcd 0000:00:15.0: Host supports USB 3.0 SuperSpeed
[ 3.730755] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.730760] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.730763] usb usb2: Product: xHCI Host Controller
[ 3.730767] usb usb2: Manufacturer: Linux 4.15.0-43-generic xhci-hcd
[ 3.730770] usb usb2: SerialNumber: 0000:00:15.0
[ 3.731193] hub 2-0:1.0: USB hub found
[ 3.731215] hub 2-0:1.0: 7 ports detected
[ 3.734584] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 3.734588] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 3.740526] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.740955] mousedev: PS/2 mouse device common for all mice
[ 3.741693] rtc_cmos 00:03: RTC can wake from S4
[ 3.742330] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 3.742442] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.742467] i2c /dev entries driver
[ 3.742481] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0
[ 3.742692] device-mapper: uevent: version 1.0.3
[ 3.742892] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 3.742909] intel_pstate: Intel P-state driver initializing
[ 3.743209] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.743887] NET: Registered protocol family 10
[ 3.750507] Segment Routing with IPv6
[ 3.750545] NET: Registered protocol family 17
[ 3.750623] Key type dns_resolver registered
[ 3.751013] intel_rdt: Intel RDT L2 allocation detected
[ 3.751034] RAS: Correctable Errors collector initialized.
[ 3.751090] microcode: sig=0x506c9, pf=0x1, revision=0x32
[ 3.751147] microcode: Microcode Update Driver: v2.2.
[ 3.751172] sched_clock: Marking stable (3751140081, 0)->(3720162931, 30977150)
[ 3.751379] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 3.751552] registered taskstats version 1
[ 3.751565] Loading compiled-in X.509 certificates
[ 3.755462] Loaded X.509 cert 'Build time autogenerated kernel key: 6afcca3ddc80072aeae87585a7fdb65d40603f58'
[ 3.755507] zswap: loaded using pool lzo/zbud
[ 3.762438] Key type big_key registered
[ 3.762445] Key type trusted registered
[ 3.765427] Key type encrypted registered
[ 3.765434] AppArmor: AppArmor sha1 policy hashing enabled
[ 3.765439] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 3.765451] ima: Allocated hash algorithm: sha1
[ 3.765478] evm: HMAC attrs: 0x1
[ 3.765980] Magic number: 3:538:354
[ 3.765991] input event0: hash matches
[ 3.766230] rtc_cmos 00:03: setting system clock to 2019-01-10 00:21:27 UTC (1547079687)
[ 3.766343] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.766344] EDD information not available.
[ 3.830465] ACPI: Battery Slot [BAT0] (battery present)
[ 3.833670] Freeing unused kernel memory: 2408K
[ 3.844332] Write protecting the kernel read-only data: 20480k
[ 3.845456] Freeing unused kernel memory: 2008K
[ 3.851510] Freeing unused kernel memory: 1892K
[ 3.862523] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 4.003073] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.012558] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.013166] r8169 0000:02:00.0 eth0: RTL8106e at 0x (ptrval), 54:e1:ad:4d:31:db, XID 04900000 IRQ 124
[ 4.033085] i801_smbus 0000:00:1f.1: SPD Write Disable is set
[ 4.033131] i801_smbus 0000:00:1f.1: SMBus using PCI interrupt
[ 4.035204] ahci 0000:00:12.0: version 3.0
[ 4.045734] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 4.045739] ahci 0000:00:12.0: flags: 64bit ncq sntf clo only pmp pio slum part deso sadm sds apst
[ 4.052092] scsi host0: ahci
[ 4.060114] scsi host1: ahci
[ 4.060210] ata1: SATA max UDMA/133 abar m2048@0x9141b000 port 0x9141b100 irq 125
[ 4.060213] ata2: SATA max UDMA/133 abar m2048@0x9141b000 port 0x9141b180 irq 125
[ 4.064056] usb 1-2: new low-speed USB device number 2 using xhci_hcd
[ 4.065131] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 4.109267] [drm] Memory usable by graphics device = 4096M
[ 4.109273] checking generic (80000000 410000) vs hw (80000000 10000000)
[ 4.109274] fb: switching to inteldrmfb from VESA VGA
[ 4.109318] Console: switching to colour dummy device 80x25
[ 4.110137] [drm] Replacing VGA console driver
[ 4.110305] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.110306] [drm] Driver supports precise vblank timestamp query.
[ 4.110448] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 4.110801] [drm] Finished loading DMC firmware i915/bxt_dmc_ver1_07.bin (v1.7)
[ 4.120529] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[ 4.122228] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.122256] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 4.123573] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 4.139716] fbcon: inteldrmfb (fb0) is primary device
[ 4.139810] Console: switching to colour frame buffer device 170x48
[ 4.139839] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 4.216405] usb 1-2: New USB device found, idVendor=0461, idProduct=4d0f
[ 4.216412] usb 1-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 4.216417] usb 1-2: Product: USB Optical Mouse
[ 4.344208] usb 1-7: new high-speed USB device number 3 using xhci_hcd
[ 4.472333] random: fast init done
[ 4.515189] usb 1-7: New USB device found, idVendor=174f, idProduct=116a
[ 4.515193] usb 1-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 4.515212] usb 1-7: Product: EasyCamera
[ 4.515214] usb 1-7: Manufacturer: 201607290001
[ 4.515215] usb 1-7: SerialNumber: 200901010001
[ 4.515560] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 4.515574] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 4.515601] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 4.532235] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.532278] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.533038] ata1.00: ATA-10: WDC WD10SPZX-24Z10T0, 01.01A01, max UDMA/133
[ 4.533041] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4.534133] ata1.00: configured for UDMA/133
[ 4.534358] scsi 0:0:0:0: Direct-Access ATA WDC WD10SPZX-24Z 1A01 PQ: 0 ANSI: 5
[ 4.534649] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.534719] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 4.534723] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 4.534744] sd 0:0:0:0: [sda] Write Protect is off
[ 4.534747] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.534772] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.535820] ata2.00: ATAPI: PLDS DVD-RW DA8AESH, XL6M, max UDMA/133
[ 4.541914] ata2.00: configured for UDMA/133
[ 4.558912] scsi 1:0:0:0: CD-ROM PLDS DVD-RW DA8AESH XL6M PQ: 0 ANSI: 5
[ 4.631253] sda: sda1
[ 4.631819] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.638048] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 4.638054] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.638518] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.638674] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.644039] usb 1-8: new full-speed USB device number 4 using xhci_hcd
[ 4.793522] usb 1-8: New USB device found, idVendor=0bda, idProduct=0821
[ 4.793526] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.793528] usb 1-8: Product: Bluetooth Radio
[ 4.793530] usb 1-8: Manufacturer: Realtek
[ 4.793531] usb 1-8: SerialNumber: 00e04c000001
[ 4.800951] usbcore: registered new interface driver usbhid
[ 4.800953] usbhid: USB HID core driver
[ 4.804137] input: USB Optical Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2:1.0/0003:0461:4D0F.0001/input/input4
[ 4.804283] hid-generic 0003:0461:4D0F.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:15.0-2/input0
[ 5.824328] [drm] RC6 on
[ 6.024012] raid6: sse2x1 gen() 5056 MB/s
[ 6.072011] raid6: sse2x1 xor() 2983 MB/s
[ 6.120007] raid6: sse2x2 gen() 5558 MB/s
[ 6.168010] raid6: sse2x2 xor() 3434 MB/s
[ 6.216005] raid6: sse2x4 gen() 6081 MB/s
[ 6.264004] raid6: sse2x4 xor() 2589 MB/s
[ 6.264005] raid6: using algorithm sse2x4 gen() 6081 MB/s
[ 6.264006] raid6: .... xor() 2589 MB/s, rmw enabled
[ 6.264007] raid6: using ssse3x2 recovery algorithm
[ 6.269753] xor: measuring software checksum speed
[ 6.308078] prefetch64-sse: 8070.000 MB/sec
[ 6.348078] generic_sse: 7393.000 MB/sec
[ 6.348079] xor: using function: prefetch64-sse (8070.000 MB/sec)
[ 6.374357] Btrfs loaded, crc32c=crc32c-intel
[ 6.987637] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 8.192868] random: crng init done
[ 8.192874] random: 7 urandom warning(s) missed due to ratelimiting
[ 9.830128] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.013984] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 10.032856] systemd[1]: Detected architecture x86-64.
[ 10.036583] systemd[1]: Set hostname to <kurtk-Lenovo-ideapad-320>.
[ 11.702435] systemd[1]: Created slice System Slice.
[ 11.702801] systemd[1]: Listening on Journal Socket (/dev/log).
[ 11.702876] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 11.702896] systemd[1]: Reached target User and Group Name Lookups.
[ 11.702971] systemd[1]: Listening on udev Kernel Socket.
[ 11.702990] systemd[1]: Reached target Remote File Systems.
[ 11.703208] systemd[1]: Created slice User and Session Slice.
[ 12.053464] lp: driver loaded but no devices found
[ 12.104625] ppdev: user-space parallel port driver
[ 12.278056] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 12.759189] systemd-journald[340]: Received request to flush runtime journal from PID 1
[ 16.464439] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS
[ 20.707868] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 21.957777] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 29.523260] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 29.574783] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 29.589780] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 29.591518] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 29.593681] i2c_hid i2c-SYNA2B37:00: i2c-SYNA2B37:00 supply vdd not found, using dummy regulator
[ 29.593769] i2c_hid i2c-SYNA2B37:00: hid_descr_cmd failed
[ 29.638409] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input5
[ 29.722574] rtl8821ae: Using firmware rtlwifi/rtl8821aefw_29.bin
[ 29.722580] rtl8821ae: Using firmware rtlwifi/rtl8821aefw_wowlan.bin
[ 29.748697] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 29.749512] rtlwifi: rtlwifi: wireless switch is on
[ 29.814906] snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 29.846539] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 29.846542] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 29.846543] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 29.846543] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 29.846544] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 29.905893] snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 29.905897] snd_hda_codec_generic hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 29.905899] snd_hda_codec_generic hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 29.905900] snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0
[ 29.905902] snd_hda_codec_generic hdaudioC0D0: inputs:
[ 29.905904] snd_hda_codec_generic hdaudioC0D0: Mic=0x19
[ 29.905906] snd_hda_codec_generic hdaudioC0D0: Internal Mic=0x12
[ 29.908663] SSE version of gcm_enc/dec engaged.
[ 29.937302] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:0e.0/sound/card0/input6
[ 29.937378] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:0e.0/sound/card0/input7
[ 29.937455] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input8
[ 29.937524] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input9
[ 29.937603] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input10
[ 29.937671] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input11
[ 29.937737] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input12
[ 29.981766] Bluetooth: Core ver 2.22
[ 29.981791] NET: Registered protocol family 31
[ 29.981792] Bluetooth: HCI device and connection manager initialized
[ 29.981797] Bluetooth: HCI socket layer initialized
[ 29.981800] Bluetooth: L2CAP socket layer initialized
[ 29.981811] Bluetooth: SCO socket layer initialized
[ 30.023653] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000a lmp_ver=06 lmp_subver=8821
[ 30.023658] Bluetooth: hci0: rtl: loading rtl_bt/rtl8821a_config.bin
[ 30.026456] usbcore: registered new interface driver btusb
[ 30.041755] bluetooth hci0: Direct firmware load for rtl_bt/rtl8821a_config.bin failed with error -2
[ 30.041761] Bluetooth: hci0: rtl: loading rtl_bt/rtl8821a_fw.bin
[ 30.059790] Bluetooth: hci0: rom_version status=0 version=1
[ 30.059805] Bluetooth: hci0: cfg_sz 0, total size 17428
[ 30.097937] EDAC pnd2: b_cr_tolud_pci=080000001 ret=0
[ 30.097981] EDAC pnd2: b_cr_touud_lo_pci=080000000 ret=0
[ 30.098022] EDAC pnd2: b_cr_touud_hi_pci=000000002 ret=0
[ 30.098063] EDAC pnd2: b_cr_asym_mem_region0_mchbar=000000000 ret=0
[ 30.098105] EDAC pnd2: b_cr_asym_mem_region1_mchbar=000000000 ret=0
[ 30.098145] EDAC pnd2: b_cr_mot_out_base_mchbar=000000000 ret=0
[ 30.098186] EDAC pnd2: b_cr_mot_out_mask_mchbar=000000000 ret=0
[ 30.098267] EDAC pnd2: b_cr_slice_channel_hash=8000000480000001 ret=0
[ 30.098309] EDAC pnd2: b_cr_asym_2way_mem_region_mchbar=000000000 ret=0
[ 30.098350] EDAC pnd2: d_cr_drp0=0c000c007 ret=0
[ 30.098390] EDAC pnd2: d_cr_drp0=000000000 ret=2
[ 30.098431] EDAC pnd2: d_cr_drp0=000000000 ret=2
[ 30.098472] EDAC pnd2: d_cr_drp0=000000000 ret=2
[ 30.098473] EDAC pnd2: ECC disabled on channel 0
[ 30.098474] EDAC pnd2: Failed to register device with error -22.
[ 30.100635] media: Linux media interface: v0.10
[ 30.108369] intel_telemetry_core Init
[ 30.132760] Linux video capture interface: v2.00
[ 30.156742] intel_rapl: Found RAPL domain package
[ 30.156746] intel_rapl: Found RAPL domain core
[ 30.156749] intel_rapl: Found RAPL domain uncore
[ 30.156751] intel_rapl: Found RAPL domain dram
[ 30.169670] audit: type=1400 audit(1547079713.899:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=586 comm="apparmor_parser"
[ 30.169677] audit: type=1400 audit(1547079713.899:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=586 comm="apparmor_parser"
[ 30.169680] audit: type=1400 audit(1547079713.899:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=586 comm="apparmor_parser"
[ 30.169684] audit: type=1400 audit(1547079713.899:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=586 comm="apparmor_parser"
[ 30.176167] audit: type=1400 audit(1547079713.907:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=585 comm="apparmor_parser"
[ 30.176172] audit: type=1400 audit(1547079713.907:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=585 comm="apparmor_parser"
[ 30.178049] audit: type=1400 audit(1547079713.907:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=590 comm="apparmor_parser"
[ 30.178055] audit: type=1400 audit(1547079713.907:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=590 comm="apparmor_parser"
[ 30.178058] audit: type=1400 audit(1547079713.907:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=590 comm="apparmor_parser"
[ 30.178717] 8812au: version magic '4.15.0-20-generic SMP mod_unload ' should be '4.15.0-43-generic SMP mod_unload '
[ 30.179000] 8812au: version magic '4.15.0-20-generic SMP mod_unload ' should be '4.15.0-43-generic SMP mod_unload '
[ 30.180521] audit: type=1400 audit(1547079713.911:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=591 comm="apparmor_parser"
[ 30.216330] uvcvideo: Found UVC 1.00 device EasyCamera (174f:116a)
[ 30.220872] uvcvideo 1-7:1.0: Entity type for entity Extension 4 was not initialized!
[ 30.220876] uvcvideo 1-7:1.0: Entity type for entity Processing 2 was not initialized!
[ 30.220878] uvcvideo 1-7:1.0: Entity type for entity Camera 1 was not initialized!
[ 30.220990] input: EasyCamera: EasyCamera as /devices/pci0000:00/0000:00:15.0/usb1/1-7/1-7:1.0/input/input13
[ 30.221106] usbcore: registered new interface driver uvcvideo
[ 30.221107] USB Video Class driver (1.1.1)
[ 30.261255] rtl8821ae 0000:03:00.0 wlp3s0: renamed from wlan0
[ 33.796221] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 33.796223] Bluetooth: BNEP filters: protocol multicast
[ 33.796230] Bluetooth: BNEP socket layer initialized
[ 37.649618] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 37.932234] r8169 0000:02:00.0 enp2s0: link down
[ 37.932400] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 37.956288] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 38.271413] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 38.337196] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 41.504366] wlp3s0: authenticate with 10:13:31:4b:df:d5
[ 41.504858] wlp3s0: send auth to 10:13:31:4b:df:d5 (try 1/3)
[ 41.511157] wlp3s0: authenticated
[ 41.512087] wlp3s0: associate with 10:13:31:4b:df:d5 (try 1/3)
[ 41.517962] wlp3s0: RX AssocResp from 10:13:31:4b:df:d5 (capab=0x11 status=0 aid=15)
[ 41.528055] wlp3s0: associated
[ 41.647382] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 45.409410] Bluetooth: RFCOMM TTY layer initialized
[ 45.409419] Bluetooth: RFCOMM socket layer initialized
[ 45.409430] Bluetooth: RFCOMM ver 1.11
[ 46.077715] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=fe80:0000:0000:0000:2780:1330:2c1a:2005 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=898120 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 46.077755] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=fe80:0000:0000:0000:2780:1330:2c1a:2005 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=665725 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 46.088303] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=fe80:0000:0000:0000:2780:1330:2c1a:2005 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=898120 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 46.088338] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=fe80:0000:0000:0000:2780:1330:2c1a:2005 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=665725 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 95.147396] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=6048 end=6049) time 185 us, min 763, max 767, scanline start 760, end 768
[ 133.231271] [UFW BLOCK] IN=wlp3s0 OUT= MAC=60:14:b3:81:b5:3d:c8:3a:6b:10:36:ba:08:00 SRC=192.168.0.33 DST=192.168.0.19 LEN=341 TOS=0x00 PREC=0x00 TTL=64 ID=55777 DF PROTO=UDP SPT=1900 DPT=45611 LEN=321
[ 135.157630] [UFW BLOCK] IN=wlp3s0 OUT= MAC=60:14:b3:81:b5:3d:c8:3a:6b:10:36:ba:08:00 SRC=192.168.0.33 DST=192.168.0.19 LEN=341 TOS=0x00 PREC=0x00 TTL=64 ID=55928 DF PROTO=UDP SPT=1900 DPT=45611 LEN=321
[ 135.921918] [UFW BLOCK] IN=wlp3s0 OUT= MAC=60:14:b3:81:b5:3d:c8:3a:6b:10:36:ba:08:00 SRC=192.168.0.33 DST=192.168.0.19 LEN=341 TOS=0x00 PREC=0x00 TTL=64 ID=55929 DF PROTO=UDP SPT=1900 DPT=45611 LEN=321
[ 136.949739] [UFW BLOCK] IN=wlp3s0 OUT= MAC=60:14:b3:81:b5:3d:c8:3a:6b:10:36:ba:08:00 SRC=192.168.0.33 DST=192.168.0.19 LEN=341 TOS=0x00 PREC=0x00 TTL=64 ID=56018 DF PROTO=UDP SPT=1900 DPT=45611 LEN=321
[ 156.144365] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:10:13:31:4b:df:d3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 205.705343] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:fb:54:99:63:a6:69:64:08:00 SRC=192.168.0.91 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=17169 PROTO=2
[ 254.251533] [UFW BLOCK] IN=wlp3s0 OUT= MAC=60:14:b3:81:b5:3d:c8:3a:6b:10:36:ba:08:00 SRC=192.168.0.33 DST=192.168.0.19 LEN=341 TOS=0x00 PREC=0x00 TTL=64 ID=56549 DF PROTO=UDP SPT=1900 DPT=60259 LEN=321
[ 255.859602] [UFW BLOCK] IN=wlp3s0 OUT= MAC=60:14:b3:81:b5:3d:c8:3a:6b:10:36:ba:08:00 SRC=192.168.0.33 DST=192.168.0.19 LEN=341 TOS=0x00 PREC=0x00 TTL=64 ID=56692 DF PROTO=UDP SPT=1900 DPT=60259 LEN=321-
nobodyknose
Re: Lenovo IdeaPad 320 touch pad not working
Thanks for the suggestion, Marcia
Unfortunately, I tried it and the touchpad still does not work 
Re: Lenovo IdeaPad 320 touch pad not working
Hello,
It took me awhile to find the correct manual for my machine. Once I did, I found out that selecting F6 turns on or off the touchpad. I just read that
is the key to turn it on or off for your machine, too. I tried it and sure enough it works perfectly on my machine. I do not know if I needed the command I gave you on the previous post or not. For just a fast simple test, I would reboot and then try the F6 key.
If that really does not work, here is a link that has info about updating to a newer kernel that solved the problem: https://forums.lenovo.com/t5/Linux-Disc ... -p/3836105
Also, there is a post on that page that talks about using the F6 key.
It appears many have it working with linux, so something should make it work.
Good fortune,
Marcia
It took me awhile to find the correct manual for my machine. Once I did, I found out that selecting F6 turns on or off the touchpad. I just read that
is the key to turn it on or off for your machine, too. I tried it and sure enough it works perfectly on my machine. I do not know if I needed the command I gave you on the previous post or not. For just a fast simple test, I would reboot and then try the F6 key.
If that really does not work, here is a link that has info about updating to a newer kernel that solved the problem: https://forums.lenovo.com/t5/Linux-Disc ... -p/3836105
Also, there is a post on that page that talks about using the F6 key.
It appears many have it working with linux, so something should make it work.
Good fortune,
Marcia
Re: Lenovo IdeaPad 320 touch pad not working
Hello again,
I just found this link that may have something for you if the other post does not help. Here it is: https://askubuntu.com/questions/1049787 ... ot-working.
Hope you get it working soon.
Good fortune,
Marcia
I just found this link that may have something for you if the other post does not help. Here it is: https://askubuntu.com/questions/1049787 ... ot-working.
Hope you get it working soon.
Good fortune,
Marcia
-
nobodyknose
Re: Lenovo IdeaPad 320 touch pad not working
Thanks again. I updated the kernel to the most recent via UUKU and rebooted a couple times, and still can't use the touch pad. I have also tried tapping the F6 key, which didn't work either.marcia wrote: ⤴Fri Jan 11, 2019 11:09 am Hello again,
I just found this link that may have something for you if the other post does not help. Here it is: https://askubuntu.com/questions/1049787 ... ot-working.
Hope you get it working soon.
Good fortune,
Marcia
Re: Lenovo IdeaPad 320 touch pad not working
Hi,
I must apologize. I found a forum and the manual for your model that says it is the F8 key that toggles the touchpad on or off.
That is maybe worth a try. If that does not work ,hopefully someone or I will be able to offer the solution.
Good fortune,
Marcia
I must apologize. I found a forum and the manual for your model that says it is the F8 key that toggles the touchpad on or off.
That is maybe worth a try. If that does not work ,hopefully someone or I will be able to offer the solution.
Good fortune,
Marcia
-
nobodyknose
Re: Lenovo IdeaPad 320 touch pad not working
Thanks again, but unfortunately the F8 key didn't work either. I'll keep searchingmarcia wrote: ⤴Sun Jan 13, 2019 1:52 pm Hi,
I must apologize. I found a forum and the manual for your model that says it is the F8 key that toggles the touchpad on or off.
That is maybe worth a try. If that does not work ,hopefully someone or I will be able to offer the solution.
Good fortune,
Marcia
Re: Lenovo IdeaPad 320 touch pad not working
Hi,
I am sending some video links that may or may not help. Here we go:
https://www.youtube.com/watch?v=dZrGUKwzyfg
https://www.youtube.com/watch?v=ZAPSrbZvsjk
https://www.youtube.com/watch?v=X3SPxLB6PFk
https://www.youtube.com/watch?v=q1rQhujINS8
https://www.youtube.com/watch?v=BtRLW_GSRj8
Maybe you fixed it already. When you do get it fixed I would love
to know what you did.
Much fortune,
Marcia
I am sending some video links that may or may not help. Here we go:
https://www.youtube.com/watch?v=dZrGUKwzyfg
https://www.youtube.com/watch?v=ZAPSrbZvsjk
https://www.youtube.com/watch?v=X3SPxLB6PFk
https://www.youtube.com/watch?v=q1rQhujINS8
https://www.youtube.com/watch?v=BtRLW_GSRj8
Maybe you fixed it already. When you do get it fixed I would love
to know what you did.
Much fortune,
Marcia