Lenovo IdeaPad 320 touch pad not working

Forum rules
Before you post please read this
Post Reply
nobodyknose
Level 1
Level 1
Posts: 6
Joined: Tue Jan 08, 2019 4:10 am

Lenovo IdeaPad 320 touch pad not working

Post by nobodyknose »

I have Linux kernel 4.15.0-43-generic, Linux Mint 19.1 installed on my Lenovo IdeaPad 320 and the touch pad is not working. I have tried all of the solutions that I could find via Google, all with no luck. Can anyone suggest a different solution?
JeremyB
Level 20
Level 20
Posts: 12008
Joined: Fri Feb 21, 2014 8:17 am

Re: Lenovo IdeaPad 320 touch pad not working

Post by JeremyB »

Post results from terminal for

Code: Select all

dmesg | grep -i elan
nobodyknose
Level 1
Level 1
Posts: 6
Joined: Tue Jan 08, 2019 4:10 am

Re: Lenovo IdeaPad 320 touch pad not working

Post by nobodyknose »

Thanks, Jeremy. I'm new to Linux, so I want to confirm: Run the instruction "dmesg | grep -i elan" in the terminal app?
marcia
Level 3
Level 3
Posts: 169
Joined: Sat Oct 27, 2007 3:34 pm

Re: Lenovo IdeaPad 320 touch pad not working

Post by marcia »

Hello,

I have a Lenovo Ideapad 530s ryzen 7. The touchpad did not work for 19.1. I read that this
will work in a terminal: sudo apt-get install xserver-xorg-input-synaptics . Reboot after this
and hopefully it will work.

Good fortune,

Marcia
JeremyB
Level 20
Level 20
Posts: 12008
Joined: Fri Feb 21, 2014 8:17 am

Re: Lenovo IdeaPad 320 touch pad not working

Post by JeremyB »

nobodyknose wrote:
Wed Jan 09, 2019 5:16 pm
Thanks, Jeremy. I'm new to Linux, so I want to confirm: Run the instruction "dmesg | grep -i elan" in the terminal app?
Yes
nobodyknose
Level 1
Level 1
Posts: 6
Joined: Tue Jan 08, 2019 4:10 am

Re: Lenovo IdeaPad 320 touch pad not working

Post by nobodyknose »

Thanks. I could get result for dmseg (below) but not grep -i elan.

Code: Select all

[    0.000000] Linux version 4.15.0-43-generic (buildd@lgw01-amd64-001) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #46-Ubuntu SMP Thu Dec 6 14:45:28 UTC 2018 (Ubuntu 4.15.0-43.46-generic 4.15.18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-43-generic root=UUID=bc29a7ad-262e-4400-be6b-46698863329a ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[3]:  576, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  640, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000012151000-0x0000000067b4ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000067b50000-0x0000000067b50fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000067b51000-0x0000000067b6afff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000067b6b000-0x0000000067ba6fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000067ba7000-0x0000000068ba6fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000068ba7000-0x000000007822efff] usable
[    0.000000] BIOS-e820: [mem 0x000000007822f000-0x000000007aebefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007aebf000-0x000000007afbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007afbf000-0x000000007affefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007afff000-0x000000007affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007b000000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe042000-0x00000000fe044fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe900000-0x00000000fe902fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.0 present.
[    0.000000] DMI: LENOVO 80XR/LNVNB161216, BIOS 5RCN36WW 08/06/2018
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7F80000000 write-back
[    0.000000]   1 base 007C000000 mask 7FFC000000 uncachable
[    0.000000]   2 base 007B000000 mask 7FFF000000 uncachable
[    0.000000]   3 base 0100000000 mask 7F00000000 write-back
[    0.000000]   4 base 0200000000 mask 7F80000000 write-back
[    0.000000]   5 base 00FFC00000 mask 70FFC00000 write-combining
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0x7b000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x25053f000, 0x25053ffff] PGTABLE
[    0.000000] BRK [0x250540000, 0x250540fff] PGTABLE
[    0.000000] BRK [0x250541000, 0x250541fff] PGTABLE
[    0.000000] BRK [0x250542000, 0x250542fff] PGTABLE
[    0.000000] BRK [0x250543000, 0x250543fff] PGTABLE
[    0.000000] BRK [0x250544000, 0x250544fff] PGTABLE
[    0.000000] BRK [0x250545000, 0x250545fff] PGTABLE
[    0.000000] BRK [0x250546000, 0x250546fff] PGTABLE
[    0.000000] BRK [0x250547000, 0x250547fff] PGTABLE
[    0.000000] BRK [0x250548000, 0x250548fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x30e65000-0x34729fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x000000007AFDF188 0000CC (v01 LENOVO CB-01    00000001      01000013)
[    0.000000] ACPI: FACP 0x000000007AFF6000 000114 (v06 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x000000007AFE9000 007E55 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FACS 0x000000007AFB0000 000040
[    0.000000] ACPI: FACS 0x000000007AFB0000 000040
[    0.000000] ACPI: UEFI 0x000000007AFFD000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MSDM 0x000000007AFFC000 000055 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: BDAT 0x000000007AFFB000 000030 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: UEFI 0x000000007AFFA000 000042 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DBG2 0x000000007AFF9000 000072 (v00 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DBGP 0x000000007AFF8000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 0x000000007AFF5000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: LPIT 0x000000007AFF4000 00005C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: APIC 0x000000007AFF3000 000084 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x000000007AFF2000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: NPKT 0x000000007AFF1000 000065 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007AFE8000 0002AF (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007AFE7000 0003DF (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007AFE6000 00072B (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007AFE5000 00032D (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007AFE4000 00017C (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007AFE1000 002701 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FPDT 0x000000007AFE0000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: WDAT 0x000000007AFF7000 000104 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: NHLT 0x000000007AFDE000 00002D (v00 LENOVO CB-01    00000001      01000013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x27ffd5000-0x27fffffff]
[    0.000000] tsc: Using PIT calibration value
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000027fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000000fffffff]
[    0.000000]   node   0: [mem 0x0000000012151000-0x0000000067b4ffff]
[    0.000000]   node   0: [mem 0x0000000067b6b000-0x0000000067ba6fff]
[    0.000000]   node   0: [mem 0x0000000068ba7000-0x000000007822efff]
[    0.000000]   node   0: [mem 0x000000007afff000-0x000000007affffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000027fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
[    0.000000] On node 0 totalpages: 2052193
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7428 pages used for memmap
[    0.000000]   DMA32 zone: 475332 pages, LIFO batch:31
[    0.000000]   Normal zone: 24576 pages used for memmap
[    0.000000]   Normal zone: 1572864 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 99 pages
[    0.000000] Reserving Intel graphics memory at 0x000000007c000000-0x000000007fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x10000000-0x12150fff]
[    0.000000] PM: Registered nosave memory: [mem 0x67b50000-0x67b50fff]
[    0.000000] PM: Registered nosave memory: [mem 0x67b51000-0x67b6afff]
[    0.000000] PM: Registered nosave memory: [mem 0x67ba7000-0x68ba6fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7822f000-0x7aebefff]
[    0.000000] PM: Registered nosave memory: [mem 0x7aebf000-0x7afbefff]
[    0.000000] PM: Registered nosave memory: [mem 0x7afbf000-0x7affefff]
[    0.000000] PM: Registered nosave memory: [mem 0x7b000000-0x7fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0xcfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xd0ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd1000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe4000000-0xfe041fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe042000-0xfe044fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe045000-0xfe8fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe900000-0xfe902fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe903000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[    0.000000] e820: [mem 0x80000000-0xcfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2020104
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-43-generic root=UUID=bc29a7ad-262e-4400-be6b-46698863329a ro quiet splash vt.handoff=1
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7924616K/8208772K available (12300K kernel code, 2472K rwdata, 4252K rodata, 2408K init, 2416K bss, 284156K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 39186 entries in 154 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#1
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
[    0.000000] hpet clockevent registered
[    0.004000] APIC: Switch to symmetric I/O mode setup
[    0.004000] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.008000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.032000] tsc: PIT calibration matches HPET. 1 loops
[    0.032000] tsc: Detected 1094.446 MHz processor
[    0.032000] tsc: Detected 1094.400 MHz TSC
[    0.032000] Calibrating delay loop (skipped), value calculated using timer frequency.. 2188.80 BogoMIPS (lpj=4377600)
[    0.032000] pid_max: default: 32768 minimum: 301
[    0.032000] Security Framework initialized
[    0.032000] Yama: becoming mindful.
[    0.032000] AppArmor: AppArmor initialized
[    0.038156] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.039851] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.039950] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.040035] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.040668] mce: CPU supports 7 MCE banks
[    0.040709] CPU0: Thermal monitoring enabled (TM1)
[    0.040790] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.040792] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.040797] Spectre V2 : Mitigation: Full generic retpoline
[    0.040798] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.040800] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.040802] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.060478] Freeing SMP alternatives memory: 36K
[    0.064230] TSC deadline timer enabled
[    0.064241] smpboot: CPU0: Intel(R) Celeron(R) CPU N3350 @ 1.10GHz (family: 0x6, model: 0x5c, stepping: 0x9)
[    0.064477] Performance Events: PEBS fmt3+, Goldmont events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.064518] ... version:                4
[    0.064519] ... bit width:              48
[    0.064521] ... generic registers:      4
[    0.064523] ... value mask:             0000ffffffffffff
[    0.064524] ... max period:             00007fffffffffff
[    0.064526] ... fixed-purpose events:   3
[    0.064527] ... event mask:             000000070000000f
[    0.064634] Hierarchical SRCU implementation.
[    0.066836] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.066884] smp: Bringing up secondary CPUs ...
[    0.067219] x86: Booting SMP configuration:
[    0.067223] .... node  #0, CPUs:      #1
[    0.068522] smp: Brought up 1 node, 2 CPUs
[    0.068522] smpboot: Max logical packages: 2
[    0.068522] smpboot: Total of 2 processors activated (4377.60 BogoMIPS)
[    0.070287] devtmpfs: initialized
[    0.070287] x86/mm: Memory block size: 128MB
[    0.073457] evm: security.selinux
[    0.073460] evm: security.SMACK64
[    0.073461] evm: security.SMACK64EXEC
[    0.073462] evm: security.SMACK64TRANSMUTE
[    0.073464] evm: security.SMACK64MMAP
[    0.073465] evm: security.apparmor
[    0.073467] evm: security.ima
[    0.073468] evm: security.capability
[    0.073550] PM: Registering ACPI NVS region [mem 0x67b50000-0x67b50fff] (4096 bytes)
[    0.073550] PM: Registering ACPI NVS region [mem 0x67ba7000-0x68ba6fff] (16777216 bytes)
[    0.073550] PM: Registering ACPI NVS region [mem 0x7aebf000-0x7afbefff] (1048576 bytes)
[    0.073550] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.073550] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.073550] pinctrl core: initialized pinctrl subsystem
[    0.073550] RTC time:  0:21:23, date: 01/10/19
[    0.077654] NET: Registered protocol family 16
[    0.077904] audit: initializing netlink subsys (disabled)
[    0.077965] audit: type=2000 audit(1547079683.076:1): state=initialized audit_enabled=0 res=1
[    0.077965] cpuidle: using governor ladder
[    0.077965] cpuidle: using governor menu
[    0.077965] ACPI: bus type PCI registered
[    0.077965] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.077965] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.077965] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[    0.077965] PCI: Using configuration type 1 for base access
[    0.077965] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.077965] mtrr: probably your BIOS does not setup all CPUs.
[    0.077965] mtrr: corrected configuration.
[    0.082447] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.082447] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.082447] ACPI: Added _OSI(Module Device)
[    0.082447] ACPI: Added _OSI(Processor Device)
[    0.082447] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.082447] ACPI: Added _OSI(Processor Aggregator Device)
[    0.082447] ACPI: Added _OSI(Linux-Dell-Video)
[    0.082447] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.084275] ACPI: Executed 3 blocks of module-level executable AML code
[    0.102549] ACPI: Dynamic OEM Table Load:
[    0.102570] ACPI: SSDT 0xFFFF99B0F5CEE200 000102 (v02 PmRef  Cpu0Cst  00003001 INTL 20121220)
[    0.104120] ACPI: Dynamic OEM Table Load:
[    0.104138] ACPI: SSDT 0xFFFF99B0F5CEEA00 00015F (v02 PmRef  ApIst    00003000 INTL 20121220)
[    0.104977] ACPI: Dynamic OEM Table Load:
[    0.104993] ACPI: SSDT 0xFFFF99B0F5CABC00 00008D (v02 PmRef  ApCst    00003000 INTL 20121220)
[    0.106362] ACPI: EC: EC started
[    0.106364] ACPI: EC: interrupt blocked
[    0.109610] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.109615] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x2b, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.109620] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.109621] ACPI: Interpreter enabled
[    0.109693] ACPI: (supports S0 S3 S4 S5)
[    0.109696] ACPI: Using IOAPIC for interrupt routing
[    0.109796] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.110656] ACPI: GPE 0x0F active on init
[    0.110752] ACPI: Enabled 9 GPEs in block 00 to 7F
[    0.140259] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.140276] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.143345] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.143389] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.145890] PCI host bridge to bus 0000:00
[    0.145897] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.145901] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.145905] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.145909] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.145913] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.145923] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.145927] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.145931] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window]
[    0.145935] pci_bus 0000:00: root bus resource [mem 0x7b800001-0x7bffffff window]
[    0.145938] pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window]
[    0.145942] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
[    0.145946] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.145970] pci 0000:00:00.0: [8086:5af0] type 00 class 0x060000
[    0.146854] pci 0000:00:02.0: [8086:5a85] type 00 class 0x030000
[    0.146883] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[    0.146899] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.146910] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.147841] pci 0000:00:0e.0: [8086:5a98] type 00 class 0x040380
[    0.147887] pci 0000:00:0e.0: reg 0x10: [mem 0x91410000-0x91413fff 64bit]
[    0.147934] pci 0000:00:0e.0: reg 0x20: [mem 0x91100000-0x911fffff 64bit]
[    0.148043] pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
[    0.148944] pci 0000:00:0f.0: [8086:5a9a] type 00 class 0x078000
[    0.148997] pci 0000:00:0f.0: reg 0x10: [mem 0x91416000-0x91416fff 64bit]
[    0.149156] pci 0000:00:0f.0: PME# supported from D3hot
[    0.149898] pci 0000:00:0f.1: [8086:5a9c] type 00 class 0x078000
[    0.149951] pci 0000:00:0f.1: reg 0x10: [mem 0x91417000-0x91417fff 64bit]
[    0.150110] pci 0000:00:0f.1: PME# supported from D3hot
[    0.150844] pci 0000:00:0f.2: [8086:5a9e] type 00 class 0x078000
[    0.150897] pci 0000:00:0f.2: reg 0x10: [mem 0x91418000-0x91418fff 64bit]
[    0.151056] pci 0000:00:0f.2: PME# supported from D3hot
[    0.151803] pci 0000:00:12.0: [8086:5ae3] type 00 class 0x010601
[    0.151833] pci 0000:00:12.0: reg 0x10: [mem 0x91414000-0x91415fff]
[    0.151846] pci 0000:00:12.0: reg 0x14: [mem 0x9141d000-0x9141d0ff]
[    0.151858] pci 0000:00:12.0: reg 0x18: [io  0x3080-0x3087]
[    0.151870] pci 0000:00:12.0: reg 0x1c: [io  0x3088-0x308b]
[    0.151883] pci 0000:00:12.0: reg 0x20: [io  0x3060-0x307f]
[    0.151896] pci 0000:00:12.0: reg 0x24: [mem 0x9141b000-0x9141b7ff]
[    0.151957] pci 0000:00:12.0: PME# supported from D3hot
[    0.152707] pci 0000:00:13.0: [8086:5ad8] type 01 class 0x060400
[    0.152851] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
[    0.153650] pci 0000:00:14.0: [8086:5ad6] type 01 class 0x060400
[    0.153761] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
[    0.154512] pci 0000:00:14.1: [8086:5ad7] type 01 class 0x060400
[    0.154626] pci 0000:00:14.1: PME# supported from D0 D3hot D3cold
[    0.155411] pci 0000:00:15.0: [8086:5aa8] type 00 class 0x0c0330
[    0.155450] pci 0000:00:15.0: reg 0x10: [mem 0x91400000-0x9140ffff 64bit]
[    0.155544] pci 0000:00:15.0: PME# supported from D3hot D3cold
[    0.156323] pci 0000:00:17.0: [8086:5ab4] type 00 class 0x118000
[    0.156365] pci 0000:00:17.0: reg 0x10: [mem 0x91419000-0x91419fff 64bit]
[    0.156383] pci 0000:00:17.0: reg 0x18: [mem 0x9141a000-0x9141afff 64bit]
[    0.157253] pci 0000:00:1f.0: [8086:5ae8] type 00 class 0x060100
[    0.158150] pci 0000:00:1f.1: [8086:5ad4] type 00 class 0x0c0500
[    0.158226] pci 0000:00:1f.1: reg 0x10: [mem 0x9141c000-0x9141c0ff 64bit]
[    0.158309] pci 0000:00:1f.1: reg 0x20: [io  0x3040-0x305f]
[    0.159246] pci 0000:00:13.0: PCI bridge to [bus 01]
[    0.159435] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
[    0.159505] pci 0000:02:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.159557] pci 0000:02:00.0: reg 0x18: [mem 0x91300000-0x91300fff 64bit]
[    0.159592] pci 0000:02:00.0: reg 0x20: [mem 0x91000000-0x91003fff 64bit pref]
[    0.159639] pci 0000:02:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
[    0.159848] pci 0000:02:00.0: supports D1 D2
[    0.159852] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.172085] pci 0000:00:14.0: PCI bridge to [bus 02]
[    0.172092] pci 0000:00:14.0:   bridge window [io  0x2000-0x2fff]
[    0.172098] pci 0000:00:14.0:   bridge window [mem 0x91300000-0x913fffff]
[    0.172107] pci 0000:00:14.0:   bridge window [mem 0x91000000-0x910fffff 64bit pref]
[    0.172264] pci 0000:03:00.0: [10ec:8821] type 00 class 0x028000
[    0.172332] pci 0000:03:00.0: reg 0x10: [io  0x1000-0x10ff]
[    0.172393] pci 0000:03:00.0: reg 0x18: [mem 0x91200000-0x91203fff 64bit]
[    0.172473] pci 0000:03:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
[    0.172635] pci 0000:03:00.0: supports D1 D2
[    0.172639] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.184082] pci 0000:00:14.1: PCI bridge to [bus 03]
[    0.184089] pci 0000:00:14.1:   bridge window [io  0x1000-0x1fff]
[    0.184096] pci 0000:00:14.1:   bridge window [mem 0x91200000-0x912fffff]
[    0.186797] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.187068] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.187337] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.187606] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.187875] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.188156] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.188423] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.188692] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.190430] ACPI: EC: interrupt unblocked
[    0.190473] ACPI: EC: event unblocked
[    0.190504] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x2b, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.190508] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.191128] SCSI subsystem initialized
[    0.191236] libata version 3.00 loaded.
[    0.191236] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.191236] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.191236] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.191236] vgaarb: loaded
[    0.191236] ACPI: bus type USB registered
[    0.191236] usbcore: registered new interface driver usbfs
[    0.191236] usbcore: registered new interface driver hub
[    0.191236] usbcore: registered new device driver usb
[    0.191236] EDAC MC: Ver: 3.0.0
[    0.192065] PCI: Using ACPI for IRQ routing
[    0.198930] PCI: pci_cache_line_size set to 64 bytes
[    0.199051] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.199055] e820: reserve RAM buffer [mem 0x67b50000-0x67ffffff]
[    0.199057] e820: reserve RAM buffer [mem 0x67ba7000-0x67ffffff]
[    0.199060] e820: reserve RAM buffer [mem 0x7822f000-0x7bffffff]
[    0.199063] e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff]
[    0.199316] NetLabel: Initializing
[    0.199319] NetLabel:  domain hash size = 128
[    0.199320] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.199354] NetLabel:  unlabeled traffic allowed by default
[    0.200675] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.200693] hpet0: 8 comparators, 64-bit 19.200000 MHz counter
[    0.202788] clocksource: Switched to clocksource hpet
[    0.233823] VFS: Disk quotas dquot_6.6.0
[    0.233868] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.234176] AppArmor: AppArmor Filesystem Enabled
[    0.234250] pnp: PnP ACPI init
[    0.235994] pnp 00:00: disabling [io  0x164e-0x164f] because it overlaps 0000:00:14.1 BAR 13 [io  0x1000-0x1fff]
[    0.236132] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.236138] system 00:00: [io  0x0400-0x047f] could not be reserved
[    0.236142] system 00:00: [io  0x0500-0x05fe] has been reserved
[    0.236146] system 00:00: [io  0x0600-0x061f] has been reserved
[    0.236163] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.236290] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.236917] system 00:02: [mem 0xe0000000-0xefffffff] could not be reserved
[    0.236922] system 00:02: [mem 0xfea00000-0xfeafffff] has been reserved
[    0.236926] system 00:02: [mem 0xfed01000-0xfed01fff] has been reserved
[    0.236930] system 00:02: [mem 0xfed03000-0xfed03fff] has been reserved
[    0.236935] system 00:02: [mem 0xfed06000-0xfed06fff] has been reserved
[    0.236939] system 00:02: [mem 0xfed08000-0xfed09fff] has been reserved
[    0.236943] system 00:02: [mem 0xfed80000-0xfedbffff] has been reserved
[    0.236947] system 00:02: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    0.236952] system 00:02: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.236965] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.237846] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.238133] pnp: PnP ACPI: found 4 devices
[    0.251037] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.251094] pci 0000:00:13.0: PCI bridge to [bus 01]
[    0.251118] pci 0000:00:14.0: PCI bridge to [bus 02]
[    0.251123] pci 0000:00:14.0:   bridge window [io  0x2000-0x2fff]
[    0.251131] pci 0000:00:14.0:   bridge window [mem 0x91300000-0x913fffff]
[    0.251137] pci 0000:00:14.0:   bridge window [mem 0x91000000-0x910fffff 64bit pref]
[    0.251146] pci 0000:00:14.1: PCI bridge to [bus 03]
[    0.251151] pci 0000:00:14.1:   bridge window [io  0x1000-0x1fff]
[    0.251158] pci 0000:00:14.1:   bridge window [mem 0x91200000-0x912fffff]
[    0.251170] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    0.251175] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    0.251179] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    0.251183] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.251187] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.251191] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.251195] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    0.251199] pci_bus 0000:00: resource 11 [mem 0x7c000001-0x7fffffff window]
[    0.251203] pci_bus 0000:00: resource 12 [mem 0x7b800001-0x7bffffff window]
[    0.251206] pci_bus 0000:00: resource 13 [mem 0x80000000-0xcfffffff window]
[    0.251210] pci_bus 0000:00: resource 14 [mem 0xe0000000-0xefffffff window]
[    0.251215] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.251219] pci_bus 0000:02: resource 1 [mem 0x91300000-0x913fffff]
[    0.251223] pci_bus 0000:02: resource 2 [mem 0x91000000-0x910fffff 64bit pref]
[    0.251227] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.251231] pci_bus 0000:03: resource 1 [mem 0x91200000-0x912fffff]
[    0.251576] NET: Registered protocol family 2
[    0.252211] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.252741] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.253458] TCP: Hash tables configured (established 65536 bind 65536)
[    0.253596] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.253746] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.253990] NET: Registered protocol family 1
[    0.254035] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.422881] pci 0000:00:15.0: xHCI BIOS handoff failed (BIOS bug ?) 00012201
[    1.423184] PCI: CLS 64 bytes, default 64
[    1.423296] Unpacking initramfs...
[    3.686314] Freeing initrd memory: 58132K
[    3.686390] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    3.686400] software IO TLB [mem 0x7422f000-0x7822f000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    3.686504] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xfc66f4fc7c, max_idle_ns: 440795224246 ns
[    3.686546] clocksource: Switched to clocksource tsc
[    3.686705] Scanning for low memory corruption every 60 seconds
[    3.688317] Initialise system trusted keyrings
[    3.688340] Key type blacklist registered
[    3.688424] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    3.691720] zbud: loaded
[    3.693086] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    3.693469] fuse init (API version 7.26)
[    3.697359] Key type asymmetric registered
[    3.697362] Asymmetric key parser 'x509' registered
[    3.697455] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    3.697536] io scheduler noop registered
[    3.697539] io scheduler deadline registered
[    3.697621] io scheduler cfq registered (default)
[    3.699395] pcieport 0000:00:13.0: Signaling PME with IRQ 120
[    3.699478] pcieport 0000:00:14.0: Signaling PME with IRQ 121
[    3.699528] pcieport 0000:00:14.1: Signaling PME with IRQ 122
[    3.699713] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[    3.699715] vesafb: scrolling: redraw
[    3.699720] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    3.699748] vesafb: framebuffer at 0x80000000, mapped to 0x        (ptrval), using 4160k, total 4160k
[    3.700032] Console: switching to colour frame buffer device 170x48
[    3.700083] fb0: VESA VGA frame buffer device
[    3.700125] intel_idle: MWAIT substates: 0x11242020
[    3.700127] intel_idle: v0.4.1 model 0x5C
[    3.700399] intel_idle: lapic_timer_reliable_states 0xffffffff
[    3.701350] ACPI: AC Adapter [ADP0] (on-line)
[    3.701560] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    3.701576] ACPI: Lid Switch [LID0]
[    3.701666] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    3.701688] ACPI: Power Button [PWRB]
[    3.705876] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    3.718535] Linux agpgart interface v0.103
[    3.723959] loop: module loaded
[    3.724595] libphy: Fixed MDIO Bus: probed
[    3.724598] tun: Universal TUN/TAP device driver, 1.6
[    3.724907] PPP generic driver version 2.4.2
[    3.725088] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.725095] ehci-pci: EHCI PCI platform driver
[    3.725172] ehci-platform: EHCI generic platform driver
[    3.725195] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.725200] ohci-pci: OHCI PCI platform driver
[    3.725225] ohci-platform: OHCI generic platform driver
[    3.725240] uhci_hcd: USB Universal Host Controller Interface driver
[    3.725965] xhci_hcd 0000:00:15.0: xHCI Host Controller
[    3.726022] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
[    3.727336] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810
[    3.727348] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
[    3.727921] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.727925] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.727929] usb usb1: Product: xHCI Host Controller
[    3.727933] usb usb1: Manufacturer: Linux 4.15.0-43-generic xhci-hcd
[    3.727936] usb usb1: SerialNumber: 0000:00:15.0
[    3.728356] hub 1-0:1.0: USB hub found
[    3.728380] hub 1-0:1.0: 8 ports detected
[    3.730611] xhci_hcd 0000:00:15.0: xHCI Host Controller
[    3.730621] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
[    3.730629] xhci_hcd 0000:00:15.0: Host supports USB 3.0  SuperSpeed
[    3.730755] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    3.730760] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.730763] usb usb2: Product: xHCI Host Controller
[    3.730767] usb usb2: Manufacturer: Linux 4.15.0-43-generic xhci-hcd
[    3.730770] usb usb2: SerialNumber: 0000:00:15.0
[    3.731193] hub 2-0:1.0: USB hub found
[    3.731215] hub 2-0:1.0: 7 ports detected
[    3.734584] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    3.734588] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    3.740526] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.740955] mousedev: PS/2 mouse device common for all mice
[    3.741693] rtc_cmos 00:03: RTC can wake from S4
[    3.742330] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    3.742442] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    3.742467] i2c /dev entries driver
[    3.742481] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0
[    3.742692] device-mapper: uevent: version 1.0.3
[    3.742892] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    3.742909] intel_pstate: Intel P-state driver initializing
[    3.743209] ledtrig-cpu: registered to indicate activity on CPUs
[    3.743887] NET: Registered protocol family 10
[    3.750507] Segment Routing with IPv6
[    3.750545] NET: Registered protocol family 17
[    3.750623] Key type dns_resolver registered
[    3.751013] intel_rdt: Intel RDT L2 allocation detected
[    3.751034] RAS: Correctable Errors collector initialized.
[    3.751090] microcode: sig=0x506c9, pf=0x1, revision=0x32
[    3.751147] microcode: Microcode Update Driver: v2.2.
[    3.751172] sched_clock: Marking stable (3751140081, 0)->(3720162931, 30977150)
[    3.751379] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    3.751552] registered taskstats version 1
[    3.751565] Loading compiled-in X.509 certificates
[    3.755462] Loaded X.509 cert 'Build time autogenerated kernel key: 6afcca3ddc80072aeae87585a7fdb65d40603f58'
[    3.755507] zswap: loaded using pool lzo/zbud
[    3.762438] Key type big_key registered
[    3.762445] Key type trusted registered
[    3.765427] Key type encrypted registered
[    3.765434] AppArmor: AppArmor sha1 policy hashing enabled
[    3.765439] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    3.765451] ima: Allocated hash algorithm: sha1
[    3.765478] evm: HMAC attrs: 0x1
[    3.765980]   Magic number: 3:538:354
[    3.765991] input event0: hash matches
[    3.766230] rtc_cmos 00:03: setting system clock to 2019-01-10 00:21:27 UTC (1547079687)
[    3.766343] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    3.766344] EDD information not available.
[    3.830465] ACPI: Battery Slot [BAT0] (battery present)
[    3.833670] Freeing unused kernel memory: 2408K
[    3.844332] Write protecting the kernel read-only data: 20480k
[    3.845456] Freeing unused kernel memory: 2008K
[    3.851510] Freeing unused kernel memory: 1892K
[    3.862523] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    4.003073] hidraw: raw HID events driver (C) Jiri Kosina
[    4.012558] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    4.013166] r8169 0000:02:00.0 eth0: RTL8106e at 0x        (ptrval), 54:e1:ad:4d:31:db, XID 04900000 IRQ 124
[    4.033085] i801_smbus 0000:00:1f.1: SPD Write Disable is set
[    4.033131] i801_smbus 0000:00:1f.1: SMBus using PCI interrupt
[    4.035204] ahci 0000:00:12.0: version 3.0
[    4.045734] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    4.045739] ahci 0000:00:12.0: flags: 64bit ncq sntf clo only pmp pio slum part deso sadm sds apst 
[    4.052092] scsi host0: ahci
[    4.060114] scsi host1: ahci
[    4.060210] ata1: SATA max UDMA/133 abar m2048@0x9141b000 port 0x9141b100 irq 125
[    4.060213] ata2: SATA max UDMA/133 abar m2048@0x9141b000 port 0x9141b180 irq 125
[    4.064056] usb 1-2: new low-speed USB device number 2 using xhci_hcd
[    4.065131] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    4.109267] [drm] Memory usable by graphics device = 4096M
[    4.109273] checking generic (80000000 410000) vs hw (80000000 10000000)
[    4.109274] fb: switching to inteldrmfb from VESA VGA
[    4.109318] Console: switching to colour dummy device 80x25
[    4.110137] [drm] Replacing VGA console driver
[    4.110305] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.110306] [drm] Driver supports precise vblank timestamp query.
[    4.110448] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    4.110801] [drm] Finished loading DMC firmware i915/bxt_dmc_ver1_07.bin (v1.7)
[    4.120529] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[    4.122228] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    4.122256] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    4.123573] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[    4.139716] fbcon: inteldrmfb (fb0) is primary device
[    4.139810] Console: switching to colour frame buffer device 170x48
[    4.139839] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    4.216405] usb 1-2: New USB device found, idVendor=0461, idProduct=4d0f
[    4.216412] usb 1-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    4.216417] usb 1-2: Product: USB Optical Mouse
[    4.344208] usb 1-7: new high-speed USB device number 3 using xhci_hcd
[    4.472333] random: fast init done
[    4.515189] usb 1-7: New USB device found, idVendor=174f, idProduct=116a
[    4.515193] usb 1-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    4.515212] usb 1-7: Product: EasyCamera
[    4.515214] usb 1-7: Manufacturer: 201607290001
[    4.515215] usb 1-7: SerialNumber: 200901010001
[    4.515560] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.515574] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.515601] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.532235] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    4.532278] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.533038] ata1.00: ATA-10: WDC WD10SPZX-24Z10T0, 01.01A01, max UDMA/133
[    4.533041] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    4.534133] ata1.00: configured for UDMA/133
[    4.534358] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10SPZX-24Z 1A01 PQ: 0 ANSI: 5
[    4.534649] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.534719] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    4.534723] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    4.534744] sd 0:0:0:0: [sda] Write Protect is off
[    4.534747] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.534772] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.535820] ata2.00: ATAPI: PLDS    DVD-RW DA8AESH, XL6M, max UDMA/133
[    4.541914] ata2.00: configured for UDMA/133
[    4.558912] scsi 1:0:0:0: CD-ROM            PLDS     DVD-RW DA8AESH   XL6M PQ: 0 ANSI: 5
[    4.631253]  sda: sda1
[    4.631819] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.638048] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    4.638054] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.638518] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    4.638674] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    4.644039] usb 1-8: new full-speed USB device number 4 using xhci_hcd
[    4.793522] usb 1-8: New USB device found, idVendor=0bda, idProduct=0821
[    4.793526] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.793528] usb 1-8: Product: Bluetooth Radio 
[    4.793530] usb 1-8: Manufacturer: Realtek 
[    4.793531] usb 1-8: SerialNumber: 00e04c000001
[    4.800951] usbcore: registered new interface driver usbhid
[    4.800953] usbhid: USB HID core driver
[    4.804137] input: USB Optical Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2:1.0/0003:0461:4D0F.0001/input/input4
[    4.804283] hid-generic 0003:0461:4D0F.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:15.0-2/input0
[    5.824328] [drm] RC6 on
[    6.024012] raid6: sse2x1   gen()  5056 MB/s
[    6.072011] raid6: sse2x1   xor()  2983 MB/s
[    6.120007] raid6: sse2x2   gen()  5558 MB/s
[    6.168010] raid6: sse2x2   xor()  3434 MB/s
[    6.216005] raid6: sse2x4   gen()  6081 MB/s
[    6.264004] raid6: sse2x4   xor()  2589 MB/s
[    6.264005] raid6: using algorithm sse2x4 gen() 6081 MB/s
[    6.264006] raid6: .... xor() 2589 MB/s, rmw enabled
[    6.264007] raid6: using ssse3x2 recovery algorithm
[    6.269753] xor: measuring software checksum speed
[    6.308078]    prefetch64-sse:  8070.000 MB/sec
[    6.348078]    generic_sse:  7393.000 MB/sec
[    6.348079] xor: using function: prefetch64-sse (8070.000 MB/sec)
[    6.374357] Btrfs loaded, crc32c=crc32c-intel
[    6.987637] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    8.192868] random: crng init done
[    8.192874] random: 7 urandom warning(s) missed due to ratelimiting
[    9.830128] ip_tables: (C) 2000-2006 Netfilter Core Team
[   10.013984] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[   10.032856] systemd[1]: Detected architecture x86-64.
[   10.036583] systemd[1]: Set hostname to <kurtk-Lenovo-ideapad-320>.
[   11.702435] systemd[1]: Created slice System Slice.
[   11.702801] systemd[1]: Listening on Journal Socket (/dev/log).
[   11.702876] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   11.702896] systemd[1]: Reached target User and Group Name Lookups.
[   11.702971] systemd[1]: Listening on udev Kernel Socket.
[   11.702990] systemd[1]: Reached target Remote File Systems.
[   11.703208] systemd[1]: Created slice User and Session Slice.
[   12.053464] lp: driver loaded but no devices found
[   12.104625] ppdev: user-space parallel port driver
[   12.278056] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   12.759189] systemd-journald[340]: Received request to flush runtime journal from PID 1
[   16.464439] Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k FS
[   20.707868] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[   21.957777] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   29.523260] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   29.574783] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   29.589780] idma64 idma64.0: Found Intel integrated DMA 64-bit
[   29.591518] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   29.593681] i2c_hid i2c-SYNA2B37:00: i2c-SYNA2B37:00 supply vdd not found, using dummy regulator
[   29.593769] i2c_hid i2c-SYNA2B37:00: hid_descr_cmd failed
[   29.638409] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input5
[   29.722574] rtl8821ae: Using firmware rtlwifi/rtl8821aefw_29.bin
[   29.722580] rtl8821ae: Using firmware rtlwifi/rtl8821aefw_wowlan.bin
[   29.748697] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   29.749512] rtlwifi: rtlwifi: wireless switch is on
[   29.814906] snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   29.846539] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[   29.846542] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   29.846543] RAPL PMU: hw unit of domain package 2^-14 Joules
[   29.846543] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   29.846544] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   29.905893] snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   29.905897] snd_hda_codec_generic hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   29.905899] snd_hda_codec_generic hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   29.905900] snd_hda_codec_generic hdaudioC0D0:    mono: mono_out=0x0
[   29.905902] snd_hda_codec_generic hdaudioC0D0:    inputs:
[   29.905904] snd_hda_codec_generic hdaudioC0D0:      Mic=0x19
[   29.905906] snd_hda_codec_generic hdaudioC0D0:      Internal Mic=0x12
[   29.908663] SSE version of gcm_enc/dec engaged.
[   29.937302] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:0e.0/sound/card0/input6
[   29.937378] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:0e.0/sound/card0/input7
[   29.937455] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input8
[   29.937524] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input9
[   29.937603] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input10
[   29.937671] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input11
[   29.937737] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input12
[   29.981766] Bluetooth: Core ver 2.22
[   29.981791] NET: Registered protocol family 31
[   29.981792] Bluetooth: HCI device and connection manager initialized
[   29.981797] Bluetooth: HCI socket layer initialized
[   29.981800] Bluetooth: L2CAP socket layer initialized
[   29.981811] Bluetooth: SCO socket layer initialized
[   30.023653] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000a lmp_ver=06 lmp_subver=8821
[   30.023658] Bluetooth: hci0: rtl: loading rtl_bt/rtl8821a_config.bin
[   30.026456] usbcore: registered new interface driver btusb
[   30.041755] bluetooth hci0: Direct firmware load for rtl_bt/rtl8821a_config.bin failed with error -2
[   30.041761] Bluetooth: hci0: rtl: loading rtl_bt/rtl8821a_fw.bin
[   30.059790] Bluetooth: hci0: rom_version status=0 version=1
[   30.059805] Bluetooth: hci0: cfg_sz 0, total size 17428
[   30.097937] EDAC pnd2: b_cr_tolud_pci=080000001 ret=0
[   30.097981] EDAC pnd2: b_cr_touud_lo_pci=080000000 ret=0
[   30.098022] EDAC pnd2: b_cr_touud_hi_pci=000000002 ret=0
[   30.098063] EDAC pnd2: b_cr_asym_mem_region0_mchbar=000000000 ret=0
[   30.098105] EDAC pnd2: b_cr_asym_mem_region1_mchbar=000000000 ret=0
[   30.098145] EDAC pnd2: b_cr_mot_out_base_mchbar=000000000 ret=0
[   30.098186] EDAC pnd2: b_cr_mot_out_mask_mchbar=000000000 ret=0
[   30.098267] EDAC pnd2: b_cr_slice_channel_hash=8000000480000001 ret=0
[   30.098309] EDAC pnd2: b_cr_asym_2way_mem_region_mchbar=000000000 ret=0
[   30.098350] EDAC pnd2: d_cr_drp0=0c000c007 ret=0
[   30.098390] EDAC pnd2: d_cr_drp0=000000000 ret=2
[   30.098431] EDAC pnd2: d_cr_drp0=000000000 ret=2
[   30.098472] EDAC pnd2: d_cr_drp0=000000000 ret=2
[   30.098473] EDAC pnd2: ECC disabled on channel 0
[   30.098474] EDAC pnd2: Failed to register device with error -22.
[   30.100635] media: Linux media interface: v0.10
[   30.108369] intel_telemetry_core Init
[   30.132760] Linux video capture interface: v2.00
[   30.156742] intel_rapl: Found RAPL domain package
[   30.156746] intel_rapl: Found RAPL domain core
[   30.156749] intel_rapl: Found RAPL domain uncore
[   30.156751] intel_rapl: Found RAPL domain dram
[   30.169670] audit: type=1400 audit(1547079713.899:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=586 comm="apparmor_parser"
[   30.169677] audit: type=1400 audit(1547079713.899:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=586 comm="apparmor_parser"
[   30.169680] audit: type=1400 audit(1547079713.899:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=586 comm="apparmor_parser"
[   30.169684] audit: type=1400 audit(1547079713.899:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=586 comm="apparmor_parser"
[   30.176167] audit: type=1400 audit(1547079713.907:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=585 comm="apparmor_parser"
[   30.176172] audit: type=1400 audit(1547079713.907:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=585 comm="apparmor_parser"
[   30.178049] audit: type=1400 audit(1547079713.907:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=590 comm="apparmor_parser"
[   30.178055] audit: type=1400 audit(1547079713.907:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=590 comm="apparmor_parser"
[   30.178058] audit: type=1400 audit(1547079713.907:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=590 comm="apparmor_parser"
[   30.178717] 8812au: version magic '4.15.0-20-generic SMP mod_unload ' should be '4.15.0-43-generic SMP mod_unload '
[   30.179000] 8812au: version magic '4.15.0-20-generic SMP mod_unload ' should be '4.15.0-43-generic SMP mod_unload '
[   30.180521] audit: type=1400 audit(1547079713.911:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=591 comm="apparmor_parser"
[   30.216330] uvcvideo: Found UVC 1.00 device EasyCamera (174f:116a)
[   30.220872] uvcvideo 1-7:1.0: Entity type for entity Extension 4 was not initialized!
[   30.220876] uvcvideo 1-7:1.0: Entity type for entity Processing 2 was not initialized!
[   30.220878] uvcvideo 1-7:1.0: Entity type for entity Camera 1 was not initialized!
[   30.220990] input: EasyCamera: EasyCamera as /devices/pci0000:00/0000:00:15.0/usb1/1-7/1-7:1.0/input/input13
[   30.221106] usbcore: registered new interface driver uvcvideo
[   30.221107] USB Video Class driver (1.1.1)
[   30.261255] rtl8821ae 0000:03:00.0 wlp3s0: renamed from wlan0
[   33.796221] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   33.796223] Bluetooth: BNEP filters: protocol multicast
[   33.796230] Bluetooth: BNEP socket layer initialized
[   37.649618] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   37.932234] r8169 0000:02:00.0 enp2s0: link down
[   37.932400] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   37.956288] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   38.271413] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   38.337196] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   41.504366] wlp3s0: authenticate with 10:13:31:4b:df:d5
[   41.504858] wlp3s0: send auth to 10:13:31:4b:df:d5 (try 1/3)
[   41.511157] wlp3s0: authenticated
[   41.512087] wlp3s0: associate with 10:13:31:4b:df:d5 (try 1/3)
[   41.517962] wlp3s0: RX AssocResp from 10:13:31:4b:df:d5 (capab=0x11 status=0 aid=15)
[   41.528055] wlp3s0: associated
[   41.647382] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   45.409410] Bluetooth: RFCOMM TTY layer initialized
[   45.409419] Bluetooth: RFCOMM socket layer initialized
[   45.409430] Bluetooth: RFCOMM ver 1.11
[   46.077715] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=fe80:0000:0000:0000:2780:1330:2c1a:2005 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=898120 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[   46.077755] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=fe80:0000:0000:0000:2780:1330:2c1a:2005 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=665725 PROTO=UDP SPT=8612 DPT=8610 LEN=24 
[   46.088303] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=fe80:0000:0000:0000:2780:1330:2c1a:2005 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=898120 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[   46.088338] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=fe80:0000:0000:0000:2780:1330:2c1a:2005 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=665725 PROTO=UDP SPT=8612 DPT=8610 LEN=24 
[   95.147396] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=6048 end=6049) time 185 us, min 763, max 767, scanline start 760, end 768
[  133.231271] [UFW BLOCK] IN=wlp3s0 OUT= MAC=60:14:b3:81:b5:3d:c8:3a:6b:10:36:ba:08:00 SRC=192.168.0.33 DST=192.168.0.19 LEN=341 TOS=0x00 PREC=0x00 TTL=64 ID=55777 DF PROTO=UDP SPT=1900 DPT=45611 LEN=321 
[  135.157630] [UFW BLOCK] IN=wlp3s0 OUT= MAC=60:14:b3:81:b5:3d:c8:3a:6b:10:36:ba:08:00 SRC=192.168.0.33 DST=192.168.0.19 LEN=341 TOS=0x00 PREC=0x00 TTL=64 ID=55928 DF PROTO=UDP SPT=1900 DPT=45611 LEN=321 
[  135.921918] [UFW BLOCK] IN=wlp3s0 OUT= MAC=60:14:b3:81:b5:3d:c8:3a:6b:10:36:ba:08:00 SRC=192.168.0.33 DST=192.168.0.19 LEN=341 TOS=0x00 PREC=0x00 TTL=64 ID=55929 DF PROTO=UDP SPT=1900 DPT=45611 LEN=321 
[  136.949739] [UFW BLOCK] IN=wlp3s0 OUT= MAC=60:14:b3:81:b5:3d:c8:3a:6b:10:36:ba:08:00 SRC=192.168.0.33 DST=192.168.0.19 LEN=341 TOS=0x00 PREC=0x00 TTL=64 ID=56018 DF PROTO=UDP SPT=1900 DPT=45611 LEN=321 
[  156.144365] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:10:13:31:4b:df:d3:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[  205.705343] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:fb:54:99:63:a6:69:64:08:00 SRC=192.168.0.91 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=17169 PROTO=2 
[  254.251533] [UFW BLOCK] IN=wlp3s0 OUT= MAC=60:14:b3:81:b5:3d:c8:3a:6b:10:36:ba:08:00 SRC=192.168.0.33 DST=192.168.0.19 LEN=341 TOS=0x00 PREC=0x00 TTL=64 ID=56549 DF PROTO=UDP SPT=1900 DPT=60259 LEN=321 
[  255.859602] [UFW BLOCK] IN=wlp3s0 OUT= MAC=60:14:b3:81:b5:3d:c8:3a:6b:10:36:ba:08:00 SRC=192.168.0.33 DST=192.168.0.19 LEN=341 TOS=0x00 PREC=0x00 TTL=64 ID=56692 DF PROTO=UDP SPT=1900 DPT=60259 LEN=321
nobodyknose
Level 1
Level 1
Posts: 6
Joined: Tue Jan 08, 2019 4:10 am

Re: Lenovo IdeaPad 320 touch pad not working

Post by nobodyknose »

marcia wrote:
Wed Jan 09, 2019 5:42 pm
Hello,

I have a Lenovo Ideapad 530s ryzen 7. The touchpad did not work for 19.1. I read that this
will work in a terminal: sudo apt-get install xserver-xorg-input-synaptics . Reboot after this
and hopefully it will work.

Good fortune,

Marcia
Thanks for the suggestion, Marcia :) Unfortunately, I tried it and the touchpad still does not work :(
marcia
Level 3
Level 3
Posts: 169
Joined: Sat Oct 27, 2007 3:34 pm

Re: Lenovo IdeaPad 320 touch pad not working

Post by marcia »

Hello,

It took me awhile to find the correct manual for my machine. Once I did, I found out that selecting F6 turns on or off the touchpad. I just read that
is the key to turn it on or off for your machine, too. I tried it and sure enough it works perfectly on my machine. I do not know if I needed the command I gave you on the previous post or not. For just a fast simple test, I would reboot and then try the F6 key.

If that really does not work, here is a link that has info about updating to a newer kernel that solved the problem: https://forums.lenovo.com/t5/Linux-Disc ... -p/3836105

Also, there is a post on that page that talks about using the F6 key.

It appears many have it working with linux, so something should make it work.

Good fortune,

Marcia
marcia
Level 3
Level 3
Posts: 169
Joined: Sat Oct 27, 2007 3:34 pm

Re: Lenovo IdeaPad 320 touch pad not working

Post by marcia »

Hello again,

I just found this link that may have something for you if the other post does not help. Here it is: https://askubuntu.com/questions/1049787 ... ot-working.

Hope you get it working soon.

Good fortune,

Marcia
nobodyknose
Level 1
Level 1
Posts: 6
Joined: Tue Jan 08, 2019 4:10 am

Re: Lenovo IdeaPad 320 touch pad not working

Post by nobodyknose »

marcia wrote:
Fri Jan 11, 2019 11:09 am
Hello again,

I just found this link that may have something for you if the other post does not help. Here it is: https://askubuntu.com/questions/1049787 ... ot-working.

Hope you get it working soon.

Good fortune,

Marcia
Thanks again. I updated the kernel to the most recent via UUKU and rebooted a couple times, and still can't use the touch pad. I have also tried tapping the F6 key, which didn't work either.
marcia
Level 3
Level 3
Posts: 169
Joined: Sat Oct 27, 2007 3:34 pm

Re: Lenovo IdeaPad 320 touch pad not working

Post by marcia »

Hi,

I must apologize. I found a forum and the manual for your model that says it is the F8 key that toggles the touchpad on or off.

That is maybe worth a try. If that does not work ,hopefully someone or I will be able to offer the solution.

Good fortune,

Marcia
nobodyknose
Level 1
Level 1
Posts: 6
Joined: Tue Jan 08, 2019 4:10 am

Re: Lenovo IdeaPad 320 touch pad not working

Post by nobodyknose »

marcia wrote:
Sun Jan 13, 2019 1:52 pm
Hi,

I must apologize. I found a forum and the manual for your model that says it is the F8 key that toggles the touchpad on or off.

That is maybe worth a try. If that does not work ,hopefully someone or I will be able to offer the solution.

Good fortune,

Marcia
Thanks again, but unfortunately the F8 key didn't work either. I'll keep searching :)
marcia
Level 3
Level 3
Posts: 169
Joined: Sat Oct 27, 2007 3:34 pm

Re: Lenovo IdeaPad 320 touch pad not working

Post by marcia »

Hi,

I am sending some video links that may or may not help. Here we go:

https://www.youtube.com/watch?v=dZrGUKwzyfg
https://www.youtube.com/watch?v=ZAPSrbZvsjk
https://www.youtube.com/watch?v=X3SPxLB6PFk
https://www.youtube.com/watch?v=q1rQhujINS8
https://www.youtube.com/watch?v=BtRLW_GSRj8

Maybe you fixed it already. When you do get it fixed I would love
to know what you did.

Much fortune,

Marcia
voyrev
Level 1
Level 1
Posts: 2
Joined: Sat Jun 15, 2019 4:51 pm

Re: Lenovo IdeaPad 320 touch pad not working

Post by voyrev »

Post Reply

Return to “Printers & Scanners”