[SOLVED] Continuing Epson printer problems / cups-pki-expired

[Gryphon 2580]

I am posting this as a new topic, but it is actually a continuation of the JazzBass post.
I have a desktop running LM21 cinnamon and a laptop running LM21 Mate. Both have lost printing function and have the cups-pki-expired error message. Lets fix the laptop first, not that I think the problem is hardware related.
I have followed the process that JazzBass and Xenopeek have outlined. I downloaded the drivers from Epson, but when I try to install the package, I get the message that the package already exists. I select install new package anyway, but it just circles back to the 'package already exists' message. Okay, so I press on to Control Center>Printers to add a new printer,
My confusion is where JazzBass chose IPP network printer via DNS-SD, I already have that in my network printer parameters (see below)

ipps://EPSON%20WF-3620%20Series._ipps._tcp.local/
IPP network printer via DNS-SD
Remote CUPS printer via DNS-SD (Epson_WF_3620_series@marc-600-1350)

I also removed ippusbxd.
So, what am I doing wrong/not doing/making a wrong turn? Is there a thread that already solves this and I just don't know what to search for? Could really use some guidance and I appreciated everyone's time and help.
Thank-you.

[brian_p]

This device is AirPrint-capable. Epson drivers should not be needed. Give the outputs from

Code: Select all

avahi-browse -rt _ipp._tcp

Code: Select all

avahi-browse -rt _uscan._tcp

Code: Select all

driverless

[Gryphon 2580]

Brian;
Thanks for your response. The data requested is below:

address = [192.168.12.177]
port = [631]
txt = ["UUID=cfe92100-67c4-11d4-a45f-ac182643d874" "URF=CP1,MT1-3-6-8-10-11-12,PQ4-5,OB9,OFU0,RS300-600,SRGB24,W8,DM3,IS1-18,V1.3" "Scan=T" "PaperMax=legal-A4" "kind=document,envelope,photo" "Fax=T" "Duplex=T" "Color=T" "note=" "adminurl=http://EPSON43D874.local.:80/PRESENTATION/BONJOUR" "qtotal=1" "rp=ipp/print" "pdl=application/octet-stream,image/urf,image/jpeg" "product=(EPSON WF-3620 Series)" "usb_MDL=WF-3620 Series" "usb_MFG=EPSON" "ty=EPSON WF-3620 Series" "priority=30" "txtvers=1"]
= wlp2s0 IPv6 EPSON_WF_3620_Series @ marc-600-1350 Internet Printer local
hostname = [marc-600-1350.local]
address = [2607:fb90:bb8c:48e:75b6:a5e2:2b0:1b42]
port = [631]
txt = ["printer-type=0x901E" "Duplex=T" "Color=T" "mopria-certified=1.3" "URF=V1.4,CP1,W8,PQ4-5,SRGB24,RS600,DM1,FN3" "TLS=1.2" "UUID=722fbc48-5fc1-3b60-7df1-403a1ac506bc" "pdl=application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster,image/urf" "product=(EPSON WF-3620 Series)" "priority=0" "note=" "adminurl=https://marc-600-1350.local.:631/printe ... 620_Series" "ty=EPSON WF-3620 Series, driverless, cups-filters 1.28.15" "rp=printers/EPSON_WF_3620_Series" "qtotal=1" "txtvers=1"]
Failed to resolve service 'EPSON_WF_3620_Series @ marc-600-1350' of type '_ipp._tcp' in domain 'local': Timeout reached

I get no reply from
avahi-browse -rt _uscan._tcp
I also tried it with sudo and apt, still no data returned.

Driverless
ipps://EPSON%20WF-3620%20Series._ipps._tcp.local/

Hope I did this correctly.

[brian_p]

Brian;
Thanks for your response. The data requested is below:

address = [192.168.12.177]
port = [631]
txt = ["UUID=cfe92100-67c4-11d4-a45f-ac182643d874" "URF=CP1,MT1-3-6-8-10-11-12,PQ4-5,OB9,OFU0,RS300-600,SRGB24,W8,DM3,IS1-18,V1.3" "Scan=T" "PaperMax=legal-A4" "kind=document,envelope,photo" "Fax=T" "Duplex=T" "Color=T" "note=" "adminurl=http://EPSON43D874.local.:80/PRESENTATION/BONJOUR" "qtotal=1" "rp=ipp/print" "pdl=application/octet-stream,image/urf,image/jpeg" "product=(EPSON WF-3620 Series)" "usb_MDL=WF-3620 Series" "usb_MFG=EPSON" "ty=EPSON WF-3620 Series" "priority=30" "txtvers=1"]

This is from the printer. It indicates a URI of

Code: Select all

ipp://192.168.12.177/ipp/print

= wlp2s0 IPv6 EPSON_WF_3620_Series @ marc-600-1350 Internet Printer local
hostname = [marc-600-1350.local]
address = [2607:fb90:bb8c:48e:75b6:a5e2:2b0:1b42]
port = [631]
txt = ["printer-type=0x901E" "Duplex=T" "Color=T" "mopria-certified=1.3" "URF=V1.4,CP1,W8,PQ4-5,SRGB24,RS600,DM1,FN3" "TLS=1.2" "UUID=722fbc48-5fc1-3b60-7df1-403a1ac506bc" "pdl=application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster,image/urf" "product=(EPSON WF-3620 Series)" "priority=0" "note=" "adminurl=https://marc-600-1350.local.:631/printe ... 620_Series" "ty=EPSON WF-3620 Series, driverless, cups-filters 1.28.15" "rp=printers/EPSON_WF_3620_Series" "qtotal=1" "txtvers=1"]
Failed to resolve service 'EPSON_WF_3620_Series @ marc-600-1350' of type '_ipp._tcp' in domain 'local': Timeout reached

Thus is from a print queue that you set up. I do not intend to use the info.

I get no reply from
avahi-browse -rt _uscan._tcp
I also tried it with sudo and apt, still no data returned.

The output is OK and not unexpected. Advice on scanning will require the output of

Code: Select all

scanimage -L

Driverless
ipps://EPSON%20WF-3620%20Series._ipps._tcp.local/

Hope I did this correctly.

The is another URI. It is preferred to the first one. However, you now have two URIs. Try both in turn in this command:

Code: Select all

lpadmin -p Wf3620 -v "URI" -E -m everywhere

Test printing with

Code: Select all

lp -d Wf3620 /etc/nsswitch.conf

[Gryphon 2580]

Brian.....
In order, the results are:

gryphon@gryphon-Inspiron-5735:~$ scanimage -L
device `airscan:w1:EPSON WF-3620 Series' is a WSD EPSON WF-3620 Series ip=192.168.12.177



lpadmin -p Wf3620 -v "URI" -E -m everywhere

The is another URI. It is preferred to the first one. However, you now have two URIs. Try both in turn in this command:

Code: Select all

lpadmin -p Wf3620 -v "URI" -E -m everywhere

I don't know how to construct this. Instructions please.

[brian_p]

Brian.....
In order, the results are:

gryphon@gryphon-Inspiron-5735:~$ scanimage -L
device `airscan:w1:EPSON WF-3620 Series' is a WSD EPSON WF-3620 Series ip=192.168.12.177

That's a good output. Can you scan with

Code: Select all

simple-scan "airscan:w1:EPSON WF-3620 Series"

lpadmin -p Wf3620 -v "URI" -E -m everywhere

The is another URI. It is preferred to the first one. However, you now have two URIs. Try both in turn in this command:

Code: Select all

lpadmin -p Wf3620 -v "URI" -E -m everywhere

I don't know how to construct this. Instructions please.

First command to try:

Code: Select all

lpadmin -p Wf3620 -v "ipp://192.168.12.177/ipp/print" -E -m everywhere

Test printing to Wf3620.

First command to try:

Code: Select all

lpadmin -p Wf3620 -v "ipps://EPSON%20WF-3620%20Series._ipps._tcp.local/" -E -m everywhere

Test printing to Wf3620.

[Gryphon 2580]

Well, I thought that was how the command was to be structured, but then I second guessed myself and talked myself out of it.
Thanks, I learned something.

For the first command:
lpadmin -p Wf3620 -v "ipp://192.168.12.177/ipp/print" -E -m everywhere
I get no return at all.

For the second command:
gryphon@gryphon-Inspiron-5735:~$ lpadmin -p Wf3620 -v "ipps://EPSON%20WF-3620%20Series._ipps._tcp.local/" -E -m everywhere
lpadmin: Success

When I tried to do a test print, I got nothing - not even a failure or error window.
I did print off a document on my windows machine just to make sure the printer was not down.

[brian_p]

Well, I thought that was how the command was to be structured, but then I second guessed myself and talked myself out of it.
Thanks, I learned something.

For the first command:
lpadmin -p Wf3620 -v "ipp://192.168.12.177/ipp/print" -E -m everywhere
I get no return at all.

That's OK. No output means no error.

Did you try

Code: Select all

lp -d Wf3620 /etc/nsswitch.conf

For the second command:
gryphon@gryphon-Inspiron-5735:~$ lpadmin -p Wf3620 -v "ipps://EPSON%20WF-3620%20Series._ipps._tcp.local/" -E -m everywhere
lpadmin: Success

OK. This command replaces the previous one. How does

Code: Select all

lp -d Wf3620 /etc/nsswitch.conf

go?

When I tried to do a test print, I got nothing - not even a failure or error window.
I did print off a document on my windows machine just to make sure the printer was not down.

I am unsure what is going on here.

BTW, you did not give the outcome from the asked for::

Code: Select all

simple-scan "airscan:w1:EPSON WF-3620 Series"

[Gryphon 2580]

Sorry, I missed that request.
After I sent the previous post, I did some updates and rebooted. The print error panel came up then.

Progress....
When I ran;
simple-scan "airscan:w1:EPSON WF-3620 Series"
The printer ran a scan, which I saved. I went to the documents folder and was able to print the saved scan. I did have 2 listings for the printer under the general tab;

WF 3620 (which worked and allowed me to print the scan)
and
EPSON_WF_3620_SERIES which showed it was PAUSED.

So on a whim, I brought up the print dialogue box (CTL+P0) and found WF 3620 listed and was able to print a copy of this forum page.

Seems like I need to remove the other printer listings and/or make WF 3620 the default print listing?

However, out of curiosity, I looked at the print dialogue box on the desktop running cinnamon and it does not have the "WF 3620" listing and it will not print from either of the 2 listings.

[Gryphon 2580]

Thank you Brian!
I just finished running through your instructions and successfully got my desktop to print!