(SOLVED) TP-LINK Archer T2U (AC600) Plus
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Re: (SOLVED) TP-LINK Archer T2U (AC600) Plus
Hello, I have the same issue, with the same exact adapter.
Trying to copy past the exact codes but it doesn't solve the problem, also the link towards the Drive is not working anymore I think.
Trying to copy past the exact codes but it doesn't solve the problem, also the link towards the Drive is not working anymore I think.
- Larry78723
- Level 14
- Posts: 5476
- Joined: Wed Jan 09, 2019 7:01 pm
- Location: Jasper County, SC, USA
Re: (SOLVED) TP-LINK Archer T2U (AC600) Plus
If you're having a problem, why is the thread marked (SOLVED)?
If you have found the solution to your initial post, please open your original post, click on the pencil, and add (Solved) to the Subject, it helps other users looking for help, and keeps the forum clean.
Re: (SOLVED) TP-LINK Archer T2U (AC600) Plus
Thank you all very much! It worked for me very well on Ubuntu 18.04LTS.
For future readers, here is the complete guide that worked for me.
For future readers, here is the complete guide that worked for me.
Code: Select all
sudo apt install git dkms
git clone https://github.com/aircrack-ng/rtl8812au.git
cd rtl8812au
sudo make dkms_install
sudo modprobe 88XXau
Re: (SOLVED) TP-LINK Archer T2U (AC600) Plus
Hi, I have the same problem while installing this to my Kali machine.
Can you please tell me will this works?
my version is:
uname -r
5.9.0-kali5-amd64
After following all these 5 steps my network adapter is not getting turned ON.
Any help will be appreciated.
Thanks.
Can you please tell me will this works?
my version is:
uname -r
5.9.0-kali5-amd64
After following all these 5 steps my network adapter is not getting turned ON.
Any help will be appreciated.
Thanks.
Re: (SOLVED) TP-LINK Archer T2U (AC600) Plus
There is no guarantee that something intended to work with Mint/Ubuntu will work with Kali. It might work just fine, and it might totally mess up your system. I see that Kali is based on Debian. If you can't find a solution intended to work with Kali, a Debian solution might be closer to your needs. Good luck.
“If the government were coming for your TVs and cars, then you'd be upset. But, as it is, they're only coming for your sons.” - Daniel Berrigan
Re: (SOLVED) TP-LINK Archer T2U (AC600) Plus
I have doe all these steps:
sudo apt install git dkms
git clone https://github.com/aircrack-ng/rtl8812au.git
cd rtl8812au
sudo make dkms_install
sudo modprobe 88XXau
I rebooted and adapter doesn't start
Any ideas? Thanks!
ifconfig
enp2s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.115 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::6887:d335:511b:ce33 prefixlen 64 scopeid 0x20<link>
ether 00:25:64:04:17:94 txqueuelen 1000 (Ethernet)
RX packets 7116 bytes 4735950 (4.7 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 5840 bytes 907941 (907.9 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 6892 bytes 615534 (615.5 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 6892 bytes 615534 (615.5 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
sudo apt install git dkms
git clone https://github.com/aircrack-ng/rtl8812au.git
cd rtl8812au
sudo make dkms_install
sudo modprobe 88XXau
I rebooted and adapter doesn't start
Any ideas? Thanks!
ifconfig
enp2s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.115 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::6887:d335:511b:ce33 prefixlen 64 scopeid 0x20<link>
ether 00:25:64:04:17:94 txqueuelen 1000 (Ethernet)
RX packets 7116 bytes 4735950 (4.7 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 5840 bytes 907941 (907.9 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 6892 bytes 615534 (615.5 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 6892 bytes 615534 (615.5 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Re: (SOLVED) TP-LINK Archer T2U (AC600) Plus
donjski wrote: ⤴Tue May 18, 2021 6:14 pm I have doe all these steps:
sudo apt install git dkms
git clone https://github.com/aircrack-ng/rtl8812au.git
cd rtl8812au
sudo make dkms_install
sudo modprobe 88XXau
I rebooted and adapter doesn't start
Any ideas? Thanks!
Read these Forum guidelines, then start your own discussion thread:
READ: How To Get Help! (Section [5] particularly)
How to post your Linux Mint System Information (inxi report)
Linux Mint 21 Vanessa, MATE 1.26.0, kernel 5.15.0*, Dell 2-in-1
AMD Ryzen 7 5825U / Barcelo iGPU - 14" WUXGA Touchscreen
MediaTek MT7921 WiFi-6 BT-5.2; 32GB DDR4@3200MHz; XPG 2TB-NVMe
AMD Ryzen 7 5825U / Barcelo iGPU - 14" WUXGA Touchscreen
MediaTek MT7921 WiFi-6 BT-5.2; 32GB DDR4@3200MHz; XPG 2TB-NVMe
Re: (SOLVED) TP-LINK Archer T2U (AC600) Plus
Wired thing. I put adapter in different usb port and it started right up...
-
- Level 1
- Posts: 1
- Joined: Sat Jun 12, 2021 7:33 am
Re: (SOLVED) TP-LINK Archer T2U (AC600) Plus
That was a great help and you guys made my day
-
- Level 1
- Posts: 1
- Joined: Sun Aug 15, 2021 7:53 am
Re: (SOLVED) TP-LINK Archer T2U (AC600) Plus
The first command which you mentioned worked flawlessly. But I am still getting a fatal error on the modprobe. Can you please suggest a solution for that?
Re: (SOLVED) TP-LINK Archer T2U (AC600) Plus
Check
mokutil --sb-state
as Secure Boot needs to be disabled, then try a rebootRe: (SOLVED) TP-LINK Archer T2U (AC600) Plus
I have done all these steps:
grgehyd@grgehyd-HP-G42-Notebook-PC:~$ git clone https://github.com/aircrack-ng/rtl8812au.git
Cloning into 'rtl8812au'...
remote: Enumerating objects: 11080, done.
remote: Counting objects: 100% (118/118), done.
remote: Compressing objects: 100% (78/78), done.
remote: Total 11080 (delta 47), reused 75 (delta 36), pack-reused 10962
Receiving objects: 100% (11080/11080), 70.96 MiB | 1.43 MiB/s, done.
Resolving deltas: 100% (7711/7711), done.
grgehyd@grgehyd-HP-G42-Notebook-PC:~$ cd rtl8812au
grgehyd@grgehyd-HP-G42-Notebook-PC:~/rtl8812au$ sudo ./dkms-install.sh
sudo: ./dkms-install.sh: command not found
grgehyd@grgehyd-HP-G42-Notebook-PC:~/rtl8812au$ cd
grgehyd@grgehyd-HP-G42-Notebook-PC:~$ sudo ./dkms-install.sh
sudo: ./dkms-install.sh: command not found
My TP Link Archer 600 is not getting recognised or driver not getting installed.
On ./sudo: ./dkms-install.sh it simply says command not found.
Please help
grgehyd@grgehyd-HP-G42-Notebook-PC:~$ git clone https://github.com/aircrack-ng/rtl8812au.git
Cloning into 'rtl8812au'...
remote: Enumerating objects: 11080, done.
remote: Counting objects: 100% (118/118), done.
remote: Compressing objects: 100% (78/78), done.
remote: Total 11080 (delta 47), reused 75 (delta 36), pack-reused 10962
Receiving objects: 100% (11080/11080), 70.96 MiB | 1.43 MiB/s, done.
Resolving deltas: 100% (7711/7711), done.
grgehyd@grgehyd-HP-G42-Notebook-PC:~$ cd rtl8812au
grgehyd@grgehyd-HP-G42-Notebook-PC:~/rtl8812au$ sudo ./dkms-install.sh
sudo: ./dkms-install.sh: command not found
grgehyd@grgehyd-HP-G42-Notebook-PC:~/rtl8812au$ cd
grgehyd@grgehyd-HP-G42-Notebook-PC:~$ sudo ./dkms-install.sh
sudo: ./dkms-install.sh: command not found
My TP Link Archer 600 is not getting recognised or driver not getting installed.
On ./sudo: ./dkms-install.sh it simply says command not found.
Please help
Re: (SOLVED) TP-LINK Archer T2U (AC600) Plus
Code: Select all
cd rtl8812au
sudo make dkms_install
-
- Level 1
- Posts: 1
- Joined: Tue Oct 05, 2021 2:59 am
Re: (SOLVED) TP-LINK Archer T2U (AC600) Plus
I'm quite new to Linux Mint but this forum is already helpful. This instruction works for me in setting up this WLAN adapter; as well troubleshooting this error when it pop " sudo: ./dkms-install.sh: command not found " using " sudo make dkms_install ". Thank you Guys
Last edited by karlchen on Tue Oct 05, 2021 3:56 am, edited 1 time in total.
Reason: removed recursive full quote in quote
Reason: removed recursive full quote in quote