here's the output of inxi
Code: Select all
System:
Kernel: 5.4.0-66-generic x86_64 bits: 64 compiler: gcc v: 9.3.0
Desktop: Cinnamon 4.6.7 wm: muffin 4.6.3 dm: LightDM 1.30.0
Distro: Linux Mint 20 Ulyana base: Ubuntu 20.04 focal
Machine:
Type: Laptop System: Hewlett-Packard product: HP ProBook 4540s
v: A1019D1103 serial: <filter> Chassis: type: 10 serial: <filter>
Mobo: Hewlett-Packard model: 17F6 v: KBC Version 58.1E serial: <filter>
BIOS: Hewlett-Packard v: 68IRR Ver. F.41 date: 05/20/2013
Battery:
ID-1: BAT0 charge: 41.7 Wh condition: 42.6/42.6 Wh (100%) volts: 12.4/10.8
model: Hewlett-Packard Primary type: Li-ion serial: <filter>
status: Unknown
CPU:
Topology: Dual Core model: Intel Core i5-3230M bits: 64 type: MT MCP
arch: Ivy Bridge rev: 9 L2 cache: 3072 KiB
flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 20752
Speed: 1197 MHz min/max: 1200/3200 MHz Core speeds (MHz): 1: 1197 2: 1197
3: 1198 4: 1199
Graphics:
Device-1: Intel 3rd Gen Core processor Graphics vendor: Hewlett-Packard
driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:0166
Device-2: AMD Thames [Radeon HD 7550M/7570M/7650M] vendor: Hewlett-Packard
driver: radeon v: kernel bus ID: 01:00.0 chip ID: 1002:6841
Display: x11 server: X.Org 1.20.9 driver: ati,modesetting,radeon
unloaded: fbdev,vesa resolution: 1366x768~60Hz
OpenGL: renderer: Mesa DRI Intel HD Graphics 4000 (IVB GT2)
v: 4.2 Mesa 20.2.6 compat-v: 3.0 direct render: Yes
Audio:
Device-1: Intel 7 Series/C216 Family High Definition Audio
vendor: Hewlett-Packard driver: snd_hda_intel v: kernel bus ID: 00:1b.0
chip ID: 8086:1e20
Sound Server: ALSA v: k5.4.0-66-generic
Network:
Device-1: Qualcomm Atheros AR9485 Wireless Network Adapter
vendor: Hewlett-Packard driver: ath9k v: kernel port: 3000 bus ID: 04:00.0
chip ID: 168c:0032
IF: wlo1 state: down mac: <filter>
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Hewlett-Packard driver: r8169 v: kernel port: 2000 bus ID: 05:00.0
chip ID: 10ec:8168
IF: enp5s0 state: down mac: <filter>
Device-3: Qualcomm Atheros type: USB driver: btusb bus ID: 2-1.6:3
chip ID: 0cf3:311d serial: <filter>
Drives:
Local Storage: total: 698.64 GiB used: 114.59 GiB (16.4%)
ID-1: /dev/sda vendor: Hitachi model: HTS727575A9E364 size: 698.64 GiB
speed: 3.0 Gb/s rotation: 7200 rpm serial: <filter> rev: A0E0 scheme: MBR
Partition:
ID-1: / size: 685.03 GiB used: 114.32 GiB (16.7%) fs: ext4 dev: /dev/dm-1
ID-2: /boot size: 703.5 MiB used: 273.7 MiB (38.9%) fs: ext4
dev: /dev/sda1
ID-3: swap-1 size: 976.0 MiB used: 0 KiB (0.0%) fs: swap dev: /dev/dm-2
Sensors:
System Temperatures: cpu: 45.0 C mobo: N/A gpu: radeon temp: 127 C
Fan Speeds (RPM): N/A
Info:
Processes: 213 Uptime: 7m Memory: 7.66 GiB used: 730.5 MiB (9.3%)
Init: systemd v: 245 runlevel: 5 Compilers: gcc: 9.3.0 alt: 7/9
Shell: bash v: 5.0.17 running in: gnome-terminal inxi: 3.0.38
Wireless works fine, but I prefer this device use ethernet. I've tried different cables all Cat 6 that I've confirmed work on other devices. I've tried issuing the command sudo ifconfig enp5s0 up and sudo ip link set enp5s0 up but the device will not come up. here's the output of ethtool
Code: Select all
Settings for enp5s0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Advertised pause frame use: Symmetric Receive-only
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: 1000Mb/s
Duplex: Full
Port: MII
PHYAD: 0
Transceiver: internal
Auto-negotiation: off
Cannot get wake-on-lan settings: Operation not permitted
Current message level: 0x00000033 (51)
drv probe ifdown ifup
Link detected: no