Code: Select all
System: Host: michael-MS-7640 Kernel: 4.4.0-133-generic x86_64 (64 bit gcc: 5.4.0)
Desktop: Cinnamon 3.6.7 (Gtk 3.18.9-1ubuntu3.3)
Distro: Linux Mint 18.3 Sylvia
Machine: Mobo: MSI model: Z170-A PRO (MS-7971) v: 1.0
Bios: American Megatrends v: 1.B0 date: 05/11/2016
CPU: Quad core Intel Core i5-6600K (-MCP-) cache: 6144 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 28032
clock speeds: max: 4500 MHz 1: 799 MHz 2: 799 MHz 3: 799 MHz
4: 799 MHz
Graphics: Card: NVIDIA Device 1b81 bus-ID: 01:00.0
Display Server: X.Org 1.18.4 drivers: nvidia (unloaded: fbdev,vesa,nouveau)
Resolution: 2560x1440@59.95hz
GLX Renderer: GeForce GTX 1070/PCIe/SSE2
GLX Version: 4.5.0 NVIDIA 384.130 Direct Rendering: Yes
Audio: Card-1 NVIDIA Device 10f0 driver: snd_hda_intel bus-ID: 01:00.1
Card-2 Intel Sunrise Point-H HD Audio
driver: snd_hda_intel bus-ID: 00:1f.3
Sound: Advanced Linux Sound Architecture v: k4.4.0-133-generic
Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: d000 bus-ID: 03:00.0
IF: eth2 state: up speed: 100 Mbps duplex: full mac: <filter>
Card-2: Ralink usb-ID: 001-005
IF: null-if-id state: N/A speed: N/A duplex: N/A mac: N/A
Drives: HDD Total Size: 1515.8GB (16.0% used)
ID-1: /dev/sda model: CT500BX100SSD1 size: 500.1GB temp: 31C
ID-2: /dev/sdb model: ST31000528AS size: 1000.2GB temp: 31C
ID-3: USB /dev/sdc model: DT_101_G2 size: 15.5GB temp: 0C
Partition: ID-1: / size: 451G used: 224G (53%) fs: ext4 dev: /dev/sda1
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 29.8C mobo: 27.8C gpu: 0.0:36C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 206 Uptime: 9 min Memory: 1229.1/16010.6MB
Init: systemd runlevel: 5 Gcc sys: 5.4.0
Client: Shell (bash 4.3.481) inxi: 2.2.35
So I went googling and tried three different git repositories including the two mentioned here: viewtopic.php?f=53&t=264693&p=1436226&h ... 0#p1436226 All three seemed to compile correctly but two them still don't recognize the adapter and the third (here: https://github.com/ulli-kroll/mt7610u) fails on this step:
Code: Select all
sudo insmod mt7610u.ko
insmod: ERROR: could not insert module mt7610u.ko: Unknown symbol in module
This is the output of lshw command no matter which solutions I tried:
Code: Select all
*-network
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:03:00.0
logical name: eth2
version: 15
serial: 4c:cc:6a:49:24:39
size: 100Mbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168h-2_0.0.2 02/26/15 ip=10.0.0.3 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
resources: irq:315 ioport:d000(size=256) memory:df104000-df104fff memory:df100000-df103fff