Code: Select all
########## wireless info START ##########
Report from: 14 Jan 2018 12:21 EST -0500
Booted last: 14 Jan 2018 12:00 EST -0500
Script from: 05 Dec 2017 03:13 UTC +0000
##### release ###########################
Distributor ID: LinuxMint
Description: Linux Mint 17.2 Rafaela
Release: 17.2
Codename: rafaela
##### kernel ############################
Linux 4.4.0-109-generic #132~14.04.1-Ubuntu SMP Tue Jan 9 21:46:42 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
Parameters: ro, quiet, splash, vt.handoff=7
##### desktop ###########################
Cinnamon
##### lspci #############################
06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:3577]
Kernel driver in use: r8169
07:00.0 Network controller [0280]: Ralink corp. RT5390 Wireless 802.11n 1T/1R PCIe [1814:5390]
Subsystem: Hewlett-Packard Company U98Z077.00 Half-size Mini PCIe Card [103c:1636]
Kernel driver in use: rt2800pci
##### lsusb #############################
Bus 002 Device 002: ID 058f:a001 Alcor Micro Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0781:5530 SanDisk Corp. Cruzer
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
##### PCMCIA card info ##################
##### rfkill ############################
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes
1: hp-wifi: Wireless LAN
Soft blocked: no
Hard blocked: yes
##### lsmod #############################
hp_wmi 16384 0
sparse_keymap 16384 1 hp_wmi
rt2800pci 16384 0
rt2800mmio 20480 1 rt2800pci
rt2800lib 90112 2 rt2800pci,rt2800mmio
rt2x00pci 16384 1 rt2800pci
rt2x00mmio 16384 2 rt2800pci,rt2800mmio
rt2x00lib 53248 5 rt2x00pci,rt2800lib,rt2800pci,rt2800mmio,rt2x00mmio
mac80211 733184 3 rt2x00lib,rt2x00pci,rt2800lib
cfg80211 561152 2 mac80211,rt2x00lib
eeprom_93cx6 16384 1 rt2800pci
crc_ccitt 16384 1 rt2800lib
wmi 20480 1 hp_wmi
##### interfaces ########################
auto lo
iface lo inet loopback
##### ifconfig ##########################
eth0 Link encap:Ethernet HWaddr <MAC 'eth0' [IF1]>
inet addr:192.168.1.241 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::<IP6 'eth0' [IF1]>/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:10397 errors:0 dropped:0 overruns:0 frame:0
TX packets:6724 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:13626601 (13.6 MB) TX bytes:598678 (598.6 KB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:485 errors:0 dropped:0 overruns:0 frame:0
TX packets:485 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:63470 (63.4 KB) TX bytes:63470 (63.4 KB)
wlan0 Link encap:Ethernet HWaddr <MAC 'wlan0' [IF2]>
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
##### iwconfig ##########################
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=off
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:off
##### route #############################
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
192.168.1.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0
##### resolv.conf #######################
nameserver 127.0.1.1
##### network managers ##################
Installed:
NetworkManager
Running:
root 926 1 0 12:00 ? 00:00:00 NetworkManager
##### NetworkManager info ###############
NetworkManager Tool
State: connected (global)
- Device: wlan0 ----------------------------------------------------------------
Type: 802.11 WiFi
Driver: rt2800pci
State: unavailable
Default: no
HW Address: <MAC 'wlan0' [IF2]>
Capabilities:
Wireless Properties
WEP Encryption: yes
WPA Encryption: yes
WPA2 Encryption: yes
Wireless Access Points
- Device: eth0 [Wired connection 1] -------------------------------------------
Type: Wired
Driver: r8169
State: connected
Default: yes
HW Address: <MAC 'eth0' [IF1]>
Capabilities:
Carrier Detect: yes
Speed: 100 Mb/s
Wired Properties
Carrier: on
IPv4 Settings:
Address: 192.168.1.241
Prefix: 24 (255.255.255.0)
Gateway: 192.168.1.1
DNS: 192.168.1.1
##### NetworkManager.state ##############
[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
WimaxEnabled=true
##### NetworkManager.conf ###############
[main]
plugins=ifupdown,keyfile,ofono
dns=dnsmasq
[ifupdown]
managed=false
##### NetworkManager profiles ###########
[[/etc/NetworkManager/system-connections/Auto AlbertNET]] (600 root)
[connection] id=Auto AlbertNET | type=802-11-wireless
[802-11-wireless] ssid=AlbertNET | mac-address=<MAC 'wlan0' [IF2]>
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/Auto Jennifer Cook's iPhone]] (600 root)
[connection] id=Auto Jennifer Cook's iPhone | type=802-11-wireless
[802-11-wireless] ssid=Jennifer Cook's iPhone | mac-address=<MAC 'wlan0' [IF2]>
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/Wi-Fi connection 1]] (600 root)
[connection] id=Wi-Fi connection 1 | type=802-11-wireless
[802-11-wireless] ssid=Jennifer Cook's iPhone
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/Hotspot]] (600 root)
[connection] id=Hotspot | type=802-11-wireless | autoconnect=false
[802-11-wireless] ssid=jennifer-HP-2000-Notebook-PC | mac-address=<MAC 'wlan0' [IF2]>
[ipv4] method=shared
[ipv6] method=auto
##### Netplan config ####################
##### iw reg get ########################
Region: America/New_York (based on set time zone)
country 00:
(2402 - 2472 @ 40), (3, 20)
(2457 - 2482 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS
(2474 - 2494 @ 20), (3, 20), NO-OFDM, PASSIVE-SCAN, NO-IBSS
(5170 - 5250 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS
(5735 - 5835 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS
##### iwlist channels ###################
lo no frequency information.
eth0 no frequency information.
wlan0 14 channels in total; available frequencies :
Channel 01 : 2.412 GHz
Channel 02 : 2.417 GHz
Channel 03 : 2.422 GHz
Channel 04 : 2.427 GHz
Channel 05 : 2.432 GHz
Channel 06 : 2.437 GHz
Channel 07 : 2.442 GHz
Channel 08 : 2.447 GHz
Channel 09 : 2.452 GHz
Channel 10 : 2.457 GHz
Channel 11 : 2.462 GHz
Channel 12 : 2.467 GHz
Channel 13 : 2.472 GHz
Channel 14 : 2.484 GHz
##### iwlist scan #######################
lo Interface doesn't support scanning.
wlan0 Interface doesn't support scanning : Network is down
eth0 Interface doesn't support scanning.
##### module infos ######################
[rt2800pci]
filename: /lib/modules/4.4.0-109-generic/kernel/drivers/net/wireless/rt2x00/rt2800pci.ko
license: GPL
firmware: rt2860.bin
description: Ralink RT2800 PCI & PCMCIA Wireless LAN driver.
version: 2.3.0
author: http://rt2x00.serialmonkey.com
srcversion: A85C15B012046B471096C5F
depends: rt2x00lib,rt2800lib,rt2800mmio,rt2x00mmio,rt2x00pci,eeprom_93cx6
intree: Y
vermagic: 4.4.0-109-generic SMP mod_unload modversions
parm: nohwcrypt:Disable hardware encryption. (bool)
[rt2800mmio]
filename: /lib/modules/4.4.0-109-generic/kernel/drivers/net/wireless/rt2x00/rt2800mmio.ko
license: GPL
description: rt2800 MMIO library
version: 2.3.0
author: http://rt2x00.serialmonkey.com
srcversion: C6D1A5D54B56AB8E61D5A73
depends: rt2800lib,rt2x00lib,rt2x00mmio
intree: Y
vermagic: 4.4.0-109-generic SMP mod_unload modversions
[rt2800lib]
filename: /lib/modules/4.4.0-109-generic/kernel/drivers/net/wireless/rt2x00/rt2800lib.ko
license: GPL
description: Ralink RT2800 library
version: 2.3.0
author: http://rt2x00.serialmonkey.com, Bartlomiej Zolnierkiewicz
srcversion: 9C888DC1E0B053A56F1B5D4
depends: rt2x00lib,mac80211,crc-ccitt
intree: Y
vermagic: 4.4.0-109-generic SMP mod_unload modversions
[rt2x00pci]
filename: /lib/modules/4.4.0-109-generic/kernel/drivers/net/wireless/rt2x00/rt2x00pci.ko
license: GPL
description: rt2x00 pci library
version: 2.3.0
author: http://rt2x00.serialmonkey.com
srcversion: 543B84557258F153AC267F0
depends: rt2x00lib,mac80211
intree: Y
vermagic: 4.4.0-109-generic SMP mod_unload modversions
[rt2x00mmio]
filename: /lib/modules/4.4.0-109-generic/kernel/drivers/net/wireless/rt2x00/rt2x00mmio.ko
license: GPL
description: rt2x00 mmio library
version: 2.3.0
author: http://rt2x00.serialmonkey.com
srcversion: ADBE279820CFD0A1081C682
depends: rt2x00lib
intree: Y
vermagic: 4.4.0-109-generic SMP mod_unload modversions
[rt2x00lib]
filename: /lib/modules/4.4.0-109-generic/kernel/drivers/net/wireless/rt2x00/rt2x00lib.ko
license: GPL
description: rt2x00 library
version: 2.3.0
author: http://rt2x00.serialmonkey.com
srcversion: 72E39180D883A5541F66494
depends: mac80211,cfg80211
intree: Y
vermagic: 4.4.0-109-generic SMP mod_unload modversions
[mac80211]
filename: /lib/modules/4.4.0-109-generic/kernel/net/mac80211/mac80211.ko
license: GPL
description: IEEE 802.11 subsystem
srcversion: 0AD8BFD6BB3C27B3A487221
depends: cfg80211
intree: Y
vermagic: 4.4.0-109-generic SMP mod_unload modversions
parm: minstrel_vht_only:Use only VHT rates when VHT is supported by sta. (bool)
parm: max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
parm: max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
parm: beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
parm: probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
parm: ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)
[cfg80211]
filename: /lib/modules/4.4.0-109-generic/kernel/net/wireless/cfg80211.ko
description: wireless configuration support
license: GPL
author: Johannes Berg
srcversion: D2A8E57424453F0D1BE1DBE
depends:
intree: Y
vermagic: 4.4.0-109-generic SMP mod_unload modversions
parm: bss_entries_limit:limit to number of scan BSS entries (per wiphy, default 1000) (int)
parm: ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm: cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)
##### module parameters #################
[rt2800pci]
nohwcrypt: N
[mac80211]
beacon_loss_count: 7
ieee80211_default_rc_algo: minstrel_ht
max_nullfunc_tries: 2
max_probe_tries: 5
minstrel_vht_only: Y
probe_wait_ms: 500
[cfg80211]
bss_entries_limit: 1000
cfg80211_disable_40mhz_24ghz: N
ieee80211_regdom: 00
##### /etc/modules ######################
lp
rtc
##### modprobe options ##################
[/etc/modprobe.d/blacklist-ath_pci.conf]
blacklist ath_pci
[/etc/modprobe.d/blacklist.conf]
blacklist evbug
blacklist usbmouse
blacklist usbkbd
blacklist eepro100
blacklist de4x5
blacklist eth1394
blacklist snd_intel8x0m
blacklist snd_aw2
blacklist i2c_i801
blacklist prism54
blacklist bcm43xx
blacklist garmin_gps
blacklist asus_acpi
blacklist snd_pcsp
blacklist pcspkr
blacklist amd76x_edac
[/etc/modprobe.d/blacklist-rare-network.conf]
alias net-pf-3 off
alias net-pf-6 off
alias net-pf-9 off
alias net-pf-11 off
alias net-pf-12 off
alias net-pf-19 off
alias net-pf-21 off
alias net-pf-36 off
[/etc/modprobe.d/iwlwifi.conf]
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
&& /sbin/modprobe -r mac80211
[/etc/modprobe.d/mlx4.conf]
softdep mlx4_core post: mlx4_en
##### rc.local ##########################
exit 0
##### pm-utils ##########################
##### udev rules ########################
[/etc/udev/rules.d/70-persistent-net.rules]
# PCI device 0x10ec:0x8136 (r8169)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC 'eth0' [IF1]>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# PCI device 0x1814:0x5390 (rt2800pci)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC 'wlan0' [IF2]>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0"
# USB device 0x:0x (rtl8192cu)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC address>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan1"
# USB device 0x:0x (rtl8192cu)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC address>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan2"
##### dmesg #############################
[ 25.207925] r8169 0000:06:00.0 eth0: link down
[ 25.208104] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 50.108666] r8169 0000:06:00.0 eth0: link up
[ 50.108702] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
########## wireless info END ############