Which adapter wireless?
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Which adapter wireless?
Good morning to everyone.... I have an old wireless adapter Belkin (Realtek 802.11n WLAN Adapter) but it works with intermittence....please there is anyone that suggest me a newest one that works without troubles in linux mint 18.3 x64, and if possible to 5 ghz? Thanks
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 1 time in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
- Pjotr
- Level 24
- Posts: 20089
- Joined: Mon Mar 07, 2011 10:18 am
- Location: The Netherlands (Holland) 🇳🇱
- Contact:
Re: wich adapter wireless?
Don't give up so soon: maybe you can get the Belkin to work properly. Please generate an overview of your system like this:
- Launch a terminal window (this is how to launch a terminal window);
- make the terminal window full screen, to avoid chopped lines;
- Copy/paste this command into the terminal:
(if you type: the letter F is a capital letter)
Press Enter.
Copy/paste the output in your next message.
b. Do the same with the following four commands:
and:
and:
and:
- Launch a terminal window (this is how to launch a terminal window);
- make the terminal window full screen, to avoid chopped lines;
- Copy/paste this command into the terminal:
Code: Select all
inxi -Fxz
Press Enter.
Copy/paste the output in your next message.
b. Do the same with the following four commands:
Code: Select all
rfkill list all
Code: Select all
iwconfig
Code: Select all
inxi -Nn
Code: Select all
lsusb
Tip: 10 things to do after installing Linux Mint 21.3 Virginia
Keep your Linux Mint healthy: Avoid these 10 fatal mistakes
Twitter: twitter.com/easylinuxtips
All in all, horse sense simply makes sense.
Keep your Linux Mint healthy: Avoid these 10 fatal mistakes
Twitter: twitter.com/easylinuxtips
All in all, horse sense simply makes sense.
Re: Which adapter wireless?
Ok thank you. This is the responce
Code: Select all
vafiadis@vafiadis-desktop ~ $ inxi -Fxz
System: Host: vafiadis-desktop Kernel: 4.13.0-38-generic x86_64 (64 bit gcc: 5.4.0)
Desktop: Cinnamon 3.6.7 (Gtk 3.18.9-1ubuntu3.3)
Distro: Linux Mint 18.3 Sylvia
Machine: Mobo: ASRock model: A320M-DGS
Bios: American Megatrends v: P3.40 date: 01/03/2018
CPU: Quad core AMD A8-9600 RADEON R7 10 COMPUTE CORES 4C+6G (-MCP-) cache: 4096 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm) bmips: 24754
clock speeds: max: 3100 MHz 1: 1787 MHz 2: 1537 MHz 3: 1633 MHz
4: 1677 MHz
Graphics: Card: NVIDIA GF116 [GeForce GTX 550 Ti] bus-ID: 0b:00.0
Display Server: X.Org 1.18.4 drivers: nvidia (unloaded: fbdev,vesa,nouveau)
Resolution: 1280x1024@75.02hz
GLX Renderer: GeForce GTX 550 Ti/PCIe/SSE2
GLX Version: 4.5.0 NVIDIA 384.111 Direct Rendering: Yes
Audio: Card-1 Advanced Micro Devices [AMD] Device 157a
driver: snd_hda_intel bus-ID: 00:09.2
Card-2 NVIDIA GF116 High Definition Audio Controller
driver: snd_hda_intel bus-ID: 0b:00.1
Card-3 Microsoft driver: USB Audio usb-ID: 002-004
Sound: Advanced Linux Sound Architecture v: k4.13.0-38-generic
Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: e000 bus-ID: 09:00.0
IF: enp9s0 state: down mac: <filter>
Card-2: Belkin F7D1102 N150/Surf Micro Wireless Adapter v1000 [Realtek RTL8188CUS]
driver: rtl8xxxu usb-ID: 002-002
IF: wlx944452e6b05f state: N/A mac: N/A
Drives: HDD Total Size: 3250.7GB (0.9% used)
ID-1: /dev/nvme0n1 model: N/A size: 250.1GB
ID-2: /dev/sda model: WDC_WD10EZRX size: 1000.2GB
ID-3: /dev/sdb model: WDC_WD2500KS size: 250.1GB
ID-4: /dev/sdc model: ST2000DM006 size: 2000.4GB
Partition: ID-1: / size: 88G used: 22G (26%) fs: ext4 dev: /dev/nvme0n1p4
ID-2: swap-1 size: 8.00GB used: 0.00GB (0%) fs: swap dev: /dev/nvme0n1p5
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 0.0C mobo: N/A gpu: 0.0:38C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 210 Uptime: 1:01 Memory: 1587.8/15029.6MB
Init: systemd runlevel: 5 Gcc sys: 5.4.0
Client: Shell (bash 4.3.481) inxi: 2.2.35
vafiadis@vafiadis-desktop ~ $ rfkill list all
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
vafiadis@vafiadis-desktop ~ $ iwconfig
wlx944452e6b05f IEEE 802.11 ESSID:"Vodafone-43375046"
Mode:Managed Frequency:2.472 GHz Access Point: BC:15:AC:EF:F8:9B
Bit Rate=1 Mb/s Tx-Power=20 dBm
Retry short limit:7 RTS thr=2347 B Fragment thr:off
Power Management:off
Link Quality=58/70 Signal level=-52 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:300 Missed beacon:0
lo no wireless extensions.
enp9s0 no wireless extensions.
vafiadis@vafiadis-desktop ~ $ inxi -Nn
Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169
IF: enp9s0 state: down mac: 70:85:c2:5c:8f:3d
Card-2: Belkin F7D1102 N150/Surf Micro Wireless Adapter v1000 [Realtek RTL8188CUS]
driver: rtl8xxxu
IF: wlx944452e6b05f state: N/A mac: N/A
vafiadis@vafiadis-desktop ~ $ lsusb
Bus 001 Device 002: ID 0438:7900 Advanced Micro Devices, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 005: ID 045e:00dd Microsoft Corp. Comfort Curve Keyboard 2000 V1.0
Bus 002 Device 004: ID 045e:0810 Microsoft Corp.
Bus 002 Device 002: ID 050d:1102 Belkin Components F7D1102 N150/Surf Micro Wireless Adapter v1000 [Realtek RTL8188CUS]
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 004 Device 003: ID 046d:c534 Logitech, Inc. Unifying Receiver
Bus 004 Device 002: ID 2357:0105
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
vafiadis@vafiadis-desktop
Re: Which adapter wireless?
Try
Reboot
Code: Select all
echo "blacklist rtl8192cu" | sudo tee /etc/modprobe.d/rtl8192cu.conf
Re: Which adapter wireless?
OK thank you. I will check this for the next week, and than I’ll inform you. Have a good day
Re: Which adapter wireless?
For Pjort - JeremyB good morning again.
After one week observation of adaptor BELKIN ascertain 3 thinks:
1. At the start of PC is not always connect ( I must remove end replace the adaptor phisically)
2. Is disconect if remains innactive over 20 minutes
3. there is daley of few seconds when i change link
You understand that is complicate for me continue in this way….
Is possible for you, help me to install Archer_T4U ? (AC 1300 Wireless Dual Band USB Adapter)
Thank you
After one week observation of adaptor BELKIN ascertain 3 thinks:
1. At the start of PC is not always connect ( I must remove end replace the adaptor phisically)
2. Is disconect if remains innactive over 20 minutes
3. there is daley of few seconds when i change link
You understand that is complicate for me continue in this way….
Is possible for you, help me to install Archer_T4U ? (AC 1300 Wireless Dual Band USB Adapter)
Thank you
Re: Which adapter wireless?
I think the T4U works after
Reboot
Code: Select all
sudo apt-get install git dkms
git clone https://github.com/abperiasamy/rtl8812AU_8821AU_linux.git
cd rtl8812AU_8821AU_linux
sudo make -f Makefile.dkms install
Re: Which adapter wireless?
In terminal
Post the URL from terminal, hopefully it show the cause of the failure
Code: Select all
cat /var/lib/dkms/rtl8812au/4.3.14/build/make.log | nc termbin.com 9999
Re: Which adapter wireless?
For JeremyB. unsuccesfull..... I remember that i had tried to install it a few days ago without success... report the answer....in italian language.....
Code: Select all
vafiadis@vafiadis-desktop ~ $ sudo apt-get install git dkms
[sudo] password di vafiadis:
Lettura elenco dei pacchetti... Fatto
Generazione albero delle dipendenze
Lettura informazioni sullo stato... Fatto
dkms is already the newest version (2.2.0.3-2ubuntu11.5).
git is already the newest version (1:2.7.4-0ubuntu1.3).
I seguenti pacchetti sono stati installati automaticamente e non sono più richiesti:
linux-headers-4.4.0-121 linux-headers-4.4.0-121-generic
Usare "sudo apt autoremove" per rimuoverli.
0 aggiornati, 0 installati, 0 da rimuovere e 1 non aggiornati.
vafiadis@vafiadis-desktop ~ $ git clone https://github.com/abperiasamy/rtl8812AU_8821AU_linux.git
fatal: il path di destinazione 'rtl8812AU_8821AU_linux' esiste già e non è una directory vuota.
vafiadis@vafiadis-desktop ~ $ cd rtl8812AU_8821AU_linux
vafiadis@vafiadis-desktop ~/rtl8812AU_8821AU_linux $ sudo make -f Makefile.dkms install
make clean
make[1]: ingresso nella directory "/home/vafiadis/rtl8812AU_8821AU_linux"
make ARCH=x86_64 CROSS_COMPILE= -C /lib/modules/4.13.0-39-generic/build M=/home/vafiadis/rtl8812AU_8821AU_linux clean
make[2]: ingresso nella directory "/usr/src/linux-headers-4.13.0-39-generic"
make[2]: uscita dalla directory "/usr/src/linux-headers-4.13.0-39-generic"
make[1]: uscita dalla directory "/home/vafiadis/rtl8812AU_8821AU_linux"
mkdir -p '/usr/src/rtl8812au-4.3.14'
cp -r dkms.conf Kconfig Makefile.dkms Makefile platform core hal include os_dep '/usr/src/rtl8812au-4.3.14'
cp Makefile '/usr/src/rtl8812au-4.3.14/Makefile'
sed 's/#MODULE_VERSION#/4.3.14/' dkms.conf > '/usr/src/rtl8812au-4.3.14/dkms.conf'
dkms add -m rtl8812au -v 4.3.14 2>/dev/null || true
dkms build -m rtl8812au -v 4.3.14
Kernel preparation unnecessary for this kernel. Skipping...
Building module:
cleaning build area....
make KERNELRELEASE=4.13.0-39-generic KVER=4.13.0-39-generic....(bad exit status: 2)
ERROR (dkms apport): binary package for rtl8812au: 4.3.14 not found
Error! Bad return status for module build on kernel: 4.13.0-39-generic (x86_64)
Consult /var/lib/dkms/rtl8812au/4.3.14/build/make.log for more information.
Makefile.dkms:18: set di istruzioni per l'obiettivo "build" non riuscito
make: *** [build] Errore 10
vafiadis@vafiadis-desktop ~/rtl8812AU_8821AU_linux $
Re: Which adapter wireless?
to JeremyB excuse me for the delay of appearance ....work problems......
the URL response is the following but i'm not expert to resolve.....thank you
the URL response is the following but i'm not expert to resolve.....thank you
Code: Select all
DKMS make.log for rtl8812au-4.3.14 for kernel 4.13.0-39-generic (x86_64)
mar 1 mag 2018, 19.26.19, CEST
make[1]: ingresso nella directory "/var/lib/dkms/rtl8812au/4.3.14/build"
make ARCH=x86_64 CROSS_COMPILE= -C /lib/modules/4.13.0-39-generic/build M=/var/lib/dkms/rtl8812au/4.3.14/build modules
make[2]: ingresso nella directory "/usr/src/linux-headers-4.13.0-39-generic"
CC [M] /var/lib/dkms/rtl8812au/4.3.14/build/core/rtw_cmd.o
In file included from /var/lib/dkms/rtl8812au/4.3.14/build/include/drv_types.h:32:0,
from /var/lib/dkms/rtl8812au/4.3.14/build/core/rtw_cmd.c:22:
/var/lib/dkms/rtl8812au/4.3.14/build/include/osdep_service.h: In function ‘thread_enter’:
/var/lib/dkms/rtl8812au/4.3.14/build/include/osdep_service.h:343:2: error: implicit declaration of function ‘allow_signal’ [-Werror=implicit-function-declaration]
allow_signal(SIGTERM);
^
/var/lib/dkms/rtl8812au/4.3.14/build/include/osdep_service.h: In function ‘flush_signals_thread’:
/var/lib/dkms/rtl8812au/4.3.14/build/include/osdep_service.h:353:6: error: implicit declaration of function ‘signal_pending’ [-Werror=implicit-function-declaration]
if (signal_pending (current)) {
^
/var/lib/dkms/rtl8812au/4.3.14/build/include/osdep_service.h:354:3: error: implicit declaration of function ‘flush_signals’ [-Werror=implicit-function-declaration]
flush_signals(current);
^
cc1: all warnings being treated as errors
scripts/Makefile.build:316: set di istruzioni per l'obiettivo "/var/lib/dkms/rtl8812au/4.3.14/build/core/rtw_cmd.o" non riuscito
make[3]: *** [/var/lib/dkms/rtl8812au/4.3.14/build/core/rtw_cmd.o] Errore 1
Makefile:1550: set di istruzioni per l'obiettivo "_module_/var/lib/dkms/rtl8812au/4.3.14/build" non riuscito
make[2]: *** [_module_/var/lib/dkms/rtl8812au/4.3.14/build] Errore 2
make[2]: uscita dalla directory "/usr/src/linux-headers-4.13.0-39-generic"
Makefile:1570: set di istruzioni per l'obiettivo "modules" non riuscito
make[1]: *** [modules] Errore 2
make[1]: uscita dalla directory "/var/lib/dkms/rtl8812au/4.3.14/build"