Tp-link TL-WN722n v3.0 not working
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Tp-link TL-WN722n v3.0 not working
Hello,
So I bought a new TL-wl722n v3.0 and for some reason it does not work. I have an older one that works fine. I can download the driver from TP-Link's website but can't compile it. Any tips or thoughts?
Thanks,
Jack
So I bought a new TL-wl722n v3.0 and for some reason it does not work. I have an older one that works fine. I can download the driver from TP-Link's website but can't compile it. Any tips or thoughts?
Thanks,
Jack
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 1 time in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
- Pjotr
- Level 24
- Posts: 20086
- Joined: Mon Mar 07, 2011 10:18 am
- Location: The Netherlands (Holland) 🇳🇱
- Contact:
Re: Tp-link TL-WN722n v3.0 not working
With the new dongle plugged in, please generate an overview of your system like this:
- Launch a terminal window (this is how to launch a terminal window);
- make the terminal window full screen, to avoid chopped lines;
- Copy/paste this command into the terminal:
(if you type: the letter F is a capital letter)
Press Enter.
Copy/paste the output in your next message.
b. Do the same with the following four commands:
and:
and:
and:
- Launch a terminal window (this is how to launch a terminal window);
- make the terminal window full screen, to avoid chopped lines;
- Copy/paste this command into the terminal:
Code: Select all
inxi -Fxz
Press Enter.
Copy/paste the output in your next message.
b. Do the same with the following four commands:
Code: Select all
rfkill list all
Code: Select all
iwconfig
Code: Select all
inxi -Nn
Code: Select all
lsusb
Tip: 10 things to do after installing Linux Mint 21.3 Virginia
Keep your Linux Mint healthy: Avoid these 10 fatal mistakes
Twitter: twitter.com/easylinuxtips
All in all, horse sense simply makes sense.
Keep your Linux Mint healthy: Avoid these 10 fatal mistakes
Twitter: twitter.com/easylinuxtips
All in all, horse sense simply makes sense.
Re: Tp-link TL-WN722n v3.0 not working
Code: Select all
computer@Computer ~ $ inxi -Fxz
System: Host: Computer Kernel: 4.10.0-38-generic x86_64 (64 bit gcc: 5.4.0)
Desktop: Cinnamon 3.6.6 (Gtk 3.18.9-1ubuntu3.3) Distro: Linux Mint 18.3 Sylvia
Machine: System: Hewlett-Packard product: HP Compaq 8100 Elite SFF PC
Mobo: Hewlett-Packard model: 304Ah Bios: Hewlett-Packard v: 786H1 v01.05 date: 06/09/2010
CPU: Dual core Intel Core i5 650 (-HT-MCP-) cache: 4096 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 12769
clock speeds: max: 3333 MHz 1: 1199 MHz 2: 1866 MHz 3: 2533 MHz 4: 2533 MHz
Graphics: Card-1: Intel Core Processor Integrated Graphics Controller bus-ID: 00:02.0
Card-2: NVIDIA Device 128b bus-ID: 18:00.0
Display Server: X.Org 1.18.4 driver: nvidia Resolution: 1024x768@60.00hz
GLX Renderer: GeForce GT 710/PCIe/SSE2 GLX Version: 4.5.0 NVIDIA 384.111 Direct Rendering: Yes
Audio: Card-1 Intel 5 Series/3400 Series High Definition Audio driver: snd_hda_intel bus-ID: 00:1b.0
Card-2 NVIDIA GK208 HDMI/DP Audio Controller driver: snd_hda_intel bus-ID: 18:00.1
Sound: Advanced Linux Sound Architecture v: k4.10.0-38-generic
Network: Card-1: Intel 82578DM Gigabit Network Connection driver: e1000e v: 3.2.6-k port: 2100 bus-ID: 00:19.0
IF: enp0s25 state: down mac: <filter>
Card-2: Atheros AR9271 802.11n driver: ath9k_htc usb-ID: 001-006
IF: wlxb0487a95b65a state: N/A mac: N/A
Drives: HDD Total Size: 500.1GB (10.2% used) ID-1: /dev/sda model: ST3500418AS size: 500.1GB
Partition: ID-1: / size: 455G used: 44G (11%) fs: ext4 dev: /dev/dm-1
ID-2: /boot size: 472M used: 68M (16%) fs: ext2 dev: /dev/sda1
ID-3: swap-1 size: 4.15GB used: 0.00GB (0%) fs: swap dev: /dev/dm-2
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 20.0C mobo: N/A gpu: 0.0:41C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 239 Uptime: 2 days Memory: 1520.3/3750.8MB Init: systemd runlevel: 5 Gcc sys: 5.4.0
Client: Shell (bash 4.3.481) inxi: 2.2.35
Code: Select all
computer@Computer ~ $ rfkill list all
1: phy1: Wireless LAN
Soft blocked: no
Hard blocked: no
Code: Select all
computer@Computer ~ $ iwconfig
lo no wireless extensions.
wlxb0487a95b65a IEEE 802.11 ESSID:"Marty69"
Mode:Managed Frequency:2.462 GHz Access Point: 28:C6:8E:82:10:2E
Bit Rate=11 Mb/s Tx-Power=20 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=30/70 Signal level=-80 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:5 Invalid misc:435 Missed beacon:0
tun0 no wireless extensions.
enp0s25 no wireless extensions.
Code: Select all
computer@Computer ~ $ inxi -Nn
Network: Card-1: Intel 82578DM Gigabit Network Connection driver: e1000e
IF: enp0s25 state: down mac: 6c:62:6d:dd:d6:d0
Card-2: Atheros AR9271 802.11n driver: ath9k_htc
IF: wlxb0487a95b65a state: N/A mac: N/A
Code: Select all
computer@Computer ~ $ lsusb
Bus 002 Device 004: ID 2357:010c
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 006: ID 0cf3:9271 Atheros Communications, Inc. AR9271 802.11n
Bus 001 Device 004: ID 413c:2107 Dell Computer Corp.
Bus 001 Device 003: ID 0461:4d81 Primax Electronics, Ltd Dell N889 Optical Mouse
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Last edited by JeremyB on Thu May 03, 2018 6:23 am, edited 1 time in total.
Reason: code tags added
Reason: code tags added
Re: Tp-link TL-WN722n v3.0 not working
I have the V1.0 one plugged in now to connect to the internet. I believe it is the Bus 002 Device 004: ID 2357:010c that is the V3.0 that does not work
- Pjotr
- Level 24
- Posts: 20086
- Joined: Mon Mar 07, 2011 10:18 am
- Location: The Netherlands (Holland) 🇳🇱
- Contact:
Re: Tp-link TL-WN722n v3.0 not working
Try this:
Update Manager - panel: View - Linux kernels
Install the latest kernel of the 4.15 series.
Then reboot.
Update Manager - panel: View - Linux kernels
Install the latest kernel of the 4.15 series.
Then reboot.
Tip: 10 things to do after installing Linux Mint 21.3 Virginia
Keep your Linux Mint healthy: Avoid these 10 fatal mistakes
Twitter: twitter.com/easylinuxtips
All in all, horse sense simply makes sense.
Keep your Linux Mint healthy: Avoid these 10 fatal mistakes
Twitter: twitter.com/easylinuxtips
All in all, horse sense simply makes sense.
Re: Tp-link TL-WN722n v3.0 not working
What about v2.0? I cant open airmon-ng or anything that enables me to go to monitor mode. I tried to solve it for few days now but i just cant. BTW im pretty new to linux
Re: Tp-link TL-WN722n v3.0 not working
it would pay you to start a new post about your issue,,
& then use those commands that Pjotr suggested, to give some information about your system.
& then use those commands that Pjotr suggested, to give some information about your system.
Please edit your original post title to include [SOLVED] - when your problem is solved!
and DO LOOK at those Unanswered Topics - - you may be able to answer some!.