I have messed up the system completely and now i get this message (as following your instructions)
Code: Select all
########## wireless info START ##########
Report from: 21 Aug 2018 18:35 +03 +0300
Booted last: 21 Aug 2018 00:00 +03 +0300
Script from: 10 Jan 2018 20:04 UTC +0000
##### release ###########################
Distributor ID: LinuxMint
Description: Linux Mint 19 Tara
Release: 19
Codename: tara
##### kernel ############################
Linux 4.15.0-20-generic #21-Ubuntu SMP Tue Apr 24 06:15:38 UTC 2018 i686 i686 i686 GNU/Linux
Parameters: ro, quiet, splash
##### desktop ###########################
Cinnamon
##### lspci #############################
00:03.0 Ethernet controller [0200]: Intel Corporation 82540EM Gigabit Ethernet Controller [8086:100e] (rev 02)
Subsystem: Intel Corporation PRO/1000 MT Desktop Adapter [8086:001e]
Kernel driver in use: e1000
##### lsusb #############################
Bus 001 Device 002: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 80ee:0021 VirtualBox USB Tablet
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
##### PCMCIA card info ##################
##### rfkill ############################
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
##### lsmod #############################
rt2800usb 28672 0
rt2x00usb 20480 1 rt2800usb
rt2800lib 110592 1 rt2800usb
rt2x00lib 49152 3 rt2800lib,rt2800usb,rt2x00usb
mac80211 675840 3 rt2800lib,rt2x00lib,rt2x00usb
cfg80211 532480 2 rt2x00lib,mac80211
##### interfaces ########################
[/etc/network/interfaces]
auto lo
iface lo inet loopback
##### ifconfig ##########################
enp0s3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.0.2.8 netmask 255.255.255.0 broadcast 10.0.2.255
inet6 fe80::d7cb:3408:290f:5ccd prefixlen 64 scopeid 0x20<link>
ether <MAC address> txqueuelen 1000 (Ethernet)
RX packets 330120 bytes 397605200 (397.6 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 189145 bytes 11873839 (11.8 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 1245 bytes 114182 (114.1 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1245 bytes 114182 (114.1 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlxf8d1111bf394: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether <MAC address> txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
##### iwconfig ##########################
lo no wireless extensions.
enp0s3 no wireless extensions.
wlxf8d1111bf394 IEEE 802.11 ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry short long limit:2 RTS thr:off Fragment thr:off
Power Management:off
##### route #############################
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 10.0.2.1 0.0.0.0 UG 100 0 0 enp0s3
10.0.2.0 0.0.0.0 255.255.255.0 U 100 0 0 enp0s3
169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 enp0s3
##### resolv.conf #######################
nameserver 127.0.0.53
##### network managers ##################
Installed:
NetworkManager
Running:
root 565 1 0 17:43 ? 00:00:03 /usr/sbin/NetworkManager --no-daemon
##### NetworkManager info ###############
GENERAL.DEVICE: enp0s3
GENERAL.TYPE: ethernet
GENERAL.NM-TYPE: NMDeviceEthernet
GENERAL.VENDOR: Intel Corporation
GENERAL.PRODUCT: 82540EM Gigabit Ethernet Controller (PRO/1000 MT Desktop Adapter)
GENERAL.DRIVER: e1000
GENERAL.DRIVER-VERSION: 7.3.21-k8-NAPI
GENERAL.FIRMWARE-VERSION: --
GENERAL.HWADDR: <MAC address>
GENERAL.MTU: 1500
GENERAL.STATE: 100 (connected)
GENERAL.REASON: 0 (No reason given)
GENERAL.UDI: /sys/devices/pci0000:00/0000:00:03.0/net/enp0s3
GENERAL.IP-IFACE: enp0s3
GENERAL.IS-SOFTWARE: no
GENERAL.NM-MANAGED: yes
GENERAL.AUTOCONNECT: yes
GENERAL.FIRMWARE-MISSING: no
GENERAL.NM-PLUGIN-MISSING: no
GENERAL.PHYS-PORT-ID: --
GENERAL.CONNECTION: Wired connection 1
GENERAL.CON-UUID: 9fc4e80d-3986-3a64-a33b-f6739457d091
GENERAL.CON-PATH: /org/freedesktop/NetworkManager/ActiveConnection/1
GENERAL.METERED: no (guessed)
CAPABILITIES.CARRIER-DETECT: yes
CAPABILITIES.SPEED: 1000 Mb/s
CAPABILITIES.IS-SOFTWARE: no
CAPABILITIES.SRIOV: no
WIRED-PROPERTIES.CARRIER: on
IP4.ADDRESS[1]: 10.0.2.8/24
IP4.GATEWAY: 10.0.2.1
IP4.ROUTE[1]: dst = 0.0.0.0/0, nh = 10.0.2.1, mt = 100
IP4.ROUTE[2]: dst = 10.0.2.0/24, nh = 0.0.0.0, mt = 100
IP4.ROUTE[3]: dst = 169.254.0.0/16, nh = 0.0.0.0, mt = 1000
IP4.DNS[1]: 192.168.1.1
DHCP4.OPTION[1]: requested_host_name = 1
DHCP4.OPTION[2]: requested_domain_search = 1
DHCP4.OPTION[3]: requested_time_offset = 1
DHCP4.OPTION[4]: requested_broadcast_address = 1
DHCP4.OPTION[5]: requested_ntp_servers = 1
DHCP4.OPTION[6]: requested_rfc3442_classless_static_routes = 1
DHCP4.OPTION[7]: requested_domain_name = 1
DHCP4.OPTION[8]: requested_netbios_scope = 1
DHCP4.OPTION[9]: expiry = 1534866820
DHCP4.OPTION[10]: next_server = 0.0.0.0
DHCP4.OPTION[11]: broadcast_address = 10.0.2.255
DHCP4.OPTION[12]: requested_interface_mtu = 1
DHCP4.OPTION[13]: dhcp_message_type = 5
DHCP4.OPTION[14]: dhcp_lease_time = 1200
DHCP4.OPTION[15]: routers = 10.0.2.1
DHCP4.OPTION[16]: ip_address = 10.0.2.8
DHCP4.OPTION[17]: requested_domain_name_servers = 1
DHCP4.OPTION[18]: subnet_mask = 255.255.255.0
DHCP4.OPTION[19]: requested_subnet_mask = 1
DHCP4.OPTION[20]: requested_static_routes = 1
DHCP4.OPTION[21]: requested_wpad = 1
DHCP4.OPTION[22]: domain_name_servers = 192.168.1.1
DHCP4.OPTION[23]: requested_netbios_name_servers = 1
DHCP4.OPTION[24]: requested_ms_classless_static_routes = 1
DHCP4.OPTION[25]: requested_routers = 1
DHCP4.OPTION[26]: network_number = 10.0.2.0
DHCP4.OPTION[27]: dhcp_server_identifier = 10.0.2.3
IP6.ADDRESS[1]: fe80::d7cb:3408:290f:5ccd/64
IP6.GATEWAY: --
IP6.ROUTE[1]: dst = ff00::/8, nh = ::, mt = 256, table=255
IP6.ROUTE[2]: dst = fe80::/64, nh = ::, mt = 256
IP6.ROUTE[3]: dst = fe80::/64, nh = ::, mt = 100
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/{1}
CONNECTIONS.AVAILABLE-CONNECTIONS[1]: 9fc4e80d-3986-3a64-a33b-f6739457d091 | Wired connection 1
GENERAL.DEVICE: wlxf8d1111bf394
GENERAL.TYPE: wifi
GENERAL.NM-TYPE: NMDeviceWifi
GENERAL.VENDOR: Ralink
GENERAL.PRODUCT: 802.11 n WLAN
GENERAL.DRIVER: rt2800usb
GENERAL.DRIVER-VERSION: 4.15.0-20-generic
GENERAL.FIRMWARE-VERSION: N/A
GENERAL.HWADDR: <MAC address>
GENERAL.MTU: 1500
GENERAL.STATE: 30 (disconnected)
GENERAL.REASON: 42 (The supplicant is now available)
GENERAL.UDI: /sys/devices/pci0000:00/0000:00:0b.0/usb1/1-1/1-1:1.0/net/wlxf8d1111bf394
GENERAL.IP-IFACE: --
GENERAL.IS-SOFTWARE: no
GENERAL.NM-MANAGED: yes
GENERAL.AUTOCONNECT: yes
GENERAL.FIRMWARE-MISSING: no
GENERAL.NM-PLUGIN-MISSING: no
GENERAL.PHYS-PORT-ID: --
GENERAL.CONNECTION: --
GENERAL.CON-UUID: --
GENERAL.CON-PATH: --
GENERAL.METERED: unknown
CAPABILITIES.CARRIER-DETECT: no
CAPABILITIES.SPEED: unknown
CAPABILITIES.IS-SOFTWARE: no
CAPABILITIES.SRIOV: no
WIFI-PROPERTIES.WEP: yes
WIFI-PROPERTIES.WPA: yes
WIFI-PROPERTIES.WPA2: yes
WIFI-PROPERTIES.TKIP: yes
WIFI-PROPERTIES.CCMP: yes
WIFI-PROPERTIES.AP: yes
WIFI-PROPERTIES.ADHOC: yes
WIFI-PROPERTIES.2GHZ: yes
WIFI-PROPERTIES.5GHZ: no
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: --
SSID BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY ACTIVE IN-USE
##### NetworkManager.state ##############
cat: /var/lib/NetworkManager/NetworkManager.state: No such file or directory
##### NetworkManager.conf ###############
[main]
plugins=ifupdown,keyfile
[ifupdown]
managed=false
[device]
wifi.scan-rand-mac-address=no
##### NetworkManager profiles ###########
##### Netplan config ####################
[/etc/netplan/1-network-manager-all.yaml]
network:
version: 2
renderer: NetworkManager
##### iw reg get ########################
Region: Europe/Istanbul (based on set time zone)
global
country 00: DFS-UNSET
(2402 - 2472 @ 40), (N/A, 20), (N/A)
(2457 - 2482 @ 20), (N/A, 20), (N/A), AUTO-BW, NO-IR
(2474 - 2494 @ 20), (N/A, 20), (N/A), NO-OFDM, NO-IR
(5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW, NO-IR
(5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW, NO-IR
(5490 - 5730 @ 160), (N/A, 20), (0 ms), DFS, NO-IR
(5735 - 5835 @ 80), (N/A, 20), (N/A), NO-IR
(57240 - 63720 @ 2160), (N/A, 0), (N/A)
##### iwlist channels ###################
lo no frequency information.
enp0s3 no frequency information.
wlxf8d1111bf394 14 channels in total; available frequencies :
Channel 01 : 2.412 GHz
Channel 02 : 2.417 GHz
Channel 03 : 2.422 GHz
Channel 04 : 2.427 GHz
Channel 05 : 2.432 GHz
Channel 06 : 2.437 GHz
Channel 07 : 2.442 GHz
Channel 08 : 2.447 GHz
Channel 09 : 2.452 GHz
Channel 10 : 2.457 GHz
Channel 11 : 2.462 GHz
Channel 12 : 2.467 GHz
Channel 13 : 2.472 GHz
Channel 14 : 2.484 GHz
##### iwlist scan #######################
lo Interface doesn't support scanning.
enp0s3 Interface doesn't support scanning.
wlxf8d1111bf394 No scan results
##### module infos ######################
[rt2800usb]
filename: /lib/modules/4.15.0-20-generic/kernel/drivers/net/wireless/ralink/rt2x00/rt2800usb.ko
license: GPL
firmware: rt2870.bin
description: Ralink RT2800 USB Wireless LAN driver.
version: 2.3.0
author: http://rt2x00.serialmonkey.com
srcversion: 4F0F1C05A752BBA568D1BFD
depends: rt2x00lib,rt2800lib,rt2x00usb
retpoline: Y
intree: Y
name: rt2800usb
vermagic: 4.15.0-20-generic SMP mod_unload 686
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
parm: nohwcrypt:Disable hardware encryption. (bool)
[rt2x00usb]
filename: /lib/modules/4.15.0-20-generic/kernel/drivers/net/wireless/ralink/rt2x00/rt2x00usb.ko
license: GPL
description: rt2x00 usb library
version: 2.3.0
author: http://rt2x00.serialmonkey.com
srcversion: 7A742B2A51EAA83026536C8
depends: rt2x00lib,mac80211
retpoline: Y
intree: Y
name: rt2x00usb
vermagic: 4.15.0-20-generic SMP mod_unload 686
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
[rt2800lib]
filename: /lib/modules/4.15.0-20-generic/kernel/drivers/net/wireless/ralink/rt2x00/rt2800lib.ko
license: GPL
description: Ralink RT2800 library
version: 2.3.0
author: http://rt2x00.serialmonkey.com, Bartlomiej Zolnierkiewicz
srcversion: E3426613D56538B49359106
depends: rt2x00lib,mac80211
retpoline: Y
intree: Y
name: rt2800lib
vermagic: 4.15.0-20-generic SMP mod_unload 686
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
[rt2x00lib]
filename: /lib/modules/4.15.0-20-generic/kernel/drivers/net/wireless/ralink/rt2x00/rt2x00lib.ko
license: GPL
description: rt2x00 library
version: 2.3.0
author: http://rt2x00.serialmonkey.com
srcversion: 61C3C15FFF5FD57ADC4DEB0
depends: mac80211,cfg80211
retpoline: Y
intree: Y
name: rt2x00lib
vermagic: 4.15.0-20-generic SMP mod_unload 686
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
[mac80211]
filename: /lib/modules/4.15.0-20-generic/kernel/net/mac80211/mac80211.ko
license: GPL
description: IEEE 802.11 subsystem
srcversion: 1CEA5CF286EDB289C1D0BF8
depends: cfg80211
retpoline: Y
intree: Y
name: mac80211
vermagic: 4.15.0-20-generic SMP mod_unload 686
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
parm: minstrel_vht_only:Use only VHT rates when VHT is supported by sta. (bool)
parm: max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
parm: max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
parm: beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
parm: probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
parm: ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)
[cfg80211]
filename: /lib/modules/4.15.0-20-generic/kernel/net/wireless/cfg80211.ko
description: wireless configuration support
license: GPL
author: Johannes Berg
srcversion: D5B0789D4C423C81CCFB437
depends:
retpoline: Y
intree: Y
name: cfg80211
vermagic: 4.15.0-20-generic SMP mod_unload 686
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
parm: bss_entries_limit:limit to number of scan BSS entries (per wiphy, default 1000) (int)
parm: ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm: cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)
##### module parameters #################
[rt2800usb]
nohwcrypt: N
[mac80211]
beacon_loss_count: 7
ieee80211_default_rc_algo: minstrel_ht
max_nullfunc_tries: 2
max_probe_tries: 5
minstrel_vht_only: Y
probe_wait_ms: 500
[cfg80211]
bss_entries_limit: 1000
cfg80211_disable_40mhz_24ghz: N
ieee80211_regdom: 00
##### /etc/modules ######################
##### modprobe options ##################
[/etc/modprobe.d/amd64-microcode-blacklist.conf]
blacklist microcode
[/etc/modprobe.d/blacklist-ath_pci.conf]
blacklist ath_pci
[/etc/modprobe.d/blacklist.conf]
blacklist evbug
blacklist usbmouse
blacklist usbkbd
blacklist eepro100
blacklist de4x5
blacklist eth1394
blacklist snd_intel8x0m
blacklist snd_aw2
blacklist i2c_i801
blacklist prism54
blacklist bcm43xx
blacklist garmin_gps
blacklist asus_acpi
blacklist snd_pcsp
blacklist pcspkr
blacklist amd76x_edac
[/etc/modprobe.d/blacklist-rare-network.conf]
alias net-pf-3 off
alias net-pf-6 off
alias net-pf-9 off
alias net-pf-11 off
alias net-pf-12 off
alias net-pf-19 off
alias net-pf-21 off
alias net-pf-36 off
[/etc/modprobe.d/intel-microcode-blacklist.conf]
blacklist microcode
[/etc/modprobe.d/iwlwifi.conf]
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
&& /sbin/modprobe -r mac80211
##### rc.local ##########################
grep: /etc/rc.local: No such file or directory
##### pm-utils ##########################
##### udev rules ########################
##### dmesg #############################
[ 25.554200] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 30.605020] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[ 32.381601] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 32.777656] rt2800usb 1-1:1.0 wlxf8d1111bf394: renamed from wlan0
[ 34.510763] IPv6: ADDRCONF(NETDEV_UP): wlxf8d1111bf394: link is not ready
[ 34.510853] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 34.553118] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[ 38.333285] IPv6: ADDRCONF(NETDEV_UP): wlxf8d1111bf394: link is not ready (repeated 2 times)
[ 250.533246] ieee80211 phy0: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x1004 with error -110
[ 253.847093] ieee80211 phy0: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x101c with error -110
[ 439.331691] ieee80211 phy0: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0500 with error -110 (repeated 2 times)
[ 1230.060487] IPv6: ADDRCONF(NETDEV_UP): wlxf8d1111bf394: link is not ready
########## wireless info END ############