here under the result of the command
Code: Select all
syssi@si5:~$ inxi -Fxz
System: Host: si5 Kernel: 4.8.0-53-generic x86_64 bits: 64 gcc: 5.4.0
Desktop: Cinnamon 3.8.9 (Gtk 3.22.30-1ubuntu1)
Distro: Linux Mint 19 Tara
Machine: Device: laptop System: Packard Bell product: EasyNote LS11HR v: V1.14 serial: N/A
Mobo: Packard Bell model: SJV70_HR serial: N/A
BIOS: Packard Bell v: V1.14 date: 09/07/2011
Battery BAT0: charge: 19.1 Wh 65.0% condition: 29.5/47.5 Wh (62%)
model: SANYO Li_Ion_4000mA status: Discharging
CPU: Dual core Intel Core i5-2430M (-MT-MCP-)
arch: Sandy Bridge rev.7 cache: 3072 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 9578
clock speeds: max: 3000 MHz 1: 800 MHz 2: 805 MHz 3: 804 MHz
4: 866 MHz
Graphics: Card-1: Intel 2nd Generation Core Integrated Graphics Controller
bus-ID: 00:02.0
Card-2: Advanced Micro Devices [AMD/ATI] Whistler [Radeon HD 6630M/6650M/6750M/7670M/7690M]
bus-ID: 01:00.0
Display Server: x11 (X.Org 1.19.6 )
drivers: modesetting,ati,radeon (unloaded: fbdev,vesa)
Resolution: 1600x900@60.08hz
OpenGL: renderer: Mesa DRI Intel Sandybridge Mobile
version: 3.3 Mesa 18.0.5 Direct Render: Yes
Audio: Card Intel 6 Series/C200 Series Family High Def. Audio Controller
bus-ID: 00:1b.0
Network: Card-1: Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet
driver: atl1c port: 2000 bus-ID: 02:00.0
IF: enp2s0 state: down mac: <filter>
Card-2: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express)
bus-ID: 03:00.0
IF: N/A state: N/A mac: N/A[/b]
Drives: HDD Total Size: 750.2GB (4.0% used)
ID-1: /dev/sda model: FUJITSU_MHY2250B size: 250.1GB
ID-2: /dev/sdb model: WDC_WD5000BPVT size: 500.1GB
Partition: ID-1: / size: 140G used: 23G (17%) fs: ext4 dev: /dev/sdb6
ID-2: swap-1 size: 6.29GB used: 0.00GB (0%)
fs: swap dev: /dev/sdb8
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: No active sensors found. Have you configured your sensors yet? mobo: N/A gpu: N/A
Info: Processes: 205 Uptime: 3 min Memory: 663.0/5820.2MB
Init: systemd runlevel: 5 Gcc sys: 7.3.0
Client: Shell (bash 4.4.191) inxi: 2.3.56
syssi@si5:~$
If you have any ideas I will be interested. Thanks a lot