<SOLVED> Linux Mint 19 MATE - No Wireless After Running Level 1 & 2 Updates

Questions about WIFI networks and devices
Forum rules
Before you post please read how to get help
Post Reply
rbeltz48
Level 4
Level 4
Posts: 242
Joined: Mon Jan 16, 2012 3:08 pm
Location: Florida, USA

<SOLVED> Linux Mint 19 MATE - No Wireless After Running Level 1 & 2 Updates

Post by rbeltz48 » Mon Nov 12, 2018 5:09 pm

Just installed LM 19 MATE on my Lenovo Thinkpad T420 test box. Ran Level 1 & 2 updates and wireless stopped working. Is this a known bug in LM 19? There was also a wireless bug in LM 18 which still hasn't been fixed. LM 17.3 ran flawlessly. Any ideas here? Thanks.

UPDATE: Ubuntu MATE 18.04 had the exact same problem after installing it and then running all the updates. No wireless. So it appears to be a Ubuntu problem.
Last edited by rbeltz48 on Wed Nov 14, 2018 7:54 am, edited 1 time in total.

JeremyB
Level 19
Level 19
Posts: 9445
Joined: Fri Feb 21, 2014 8:17 am

Re: Linux Mint 19 MATE - No Wireless After Running Level 1 & 2 Updates

Post by JeremyB » Mon Nov 12, 2018 5:47 pm

See the wireless script link in my signature and post results

rbeltz48
Level 4
Level 4
Posts: 242
Joined: Mon Jan 16, 2012 3:08 pm
Location: Florida, USA

Re: Linux Mint 19 MATE - No Wireless After Running Level 1 & 2 Updates

Post by rbeltz48 » Tue Nov 13, 2018 11:25 am

First Command Results:

Code: Select all

########## wireless info START ##########

Report from: 13 Nov 2018 10:17 EST -0500

Booted last: 13 Nov 2018 00:00 EST -0500

Script from: 22 Oct 2018 03:34 UTC +0000

##### release ###########################

Distributor ID:	LinuxMint
Description:	Linux Mint 19 Tara
Release:	19
Codename:	tara

##### kernel ############################

Linux 4.15.0-20-generic #21-Ubuntu SMP Tue Apr 24 06:16:15 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux

Parameters: ro, quiet, splash, vt.handoff=1

##### desktop ###########################

MATE

##### lspci #############################

00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection [8086:1502] (rev 04)
	Subsystem: Lenovo 82579LM Gigabit Network Connection (Lewisville) (ThinkPad T520) [17aa:21ce]
	Kernel driver in use: e1000e

03:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] [8086:0085] (rev 34)
	Subsystem: Intel Corporation Centrino Advanced-N 6205 AGN [8086:1311]
	Kernel driver in use: iwlwifi

##### lsusb #############################

Bus 002 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 04f2:b221 Chicony Electronics Co., Ltd integrated camera
Bus 001 Device 003: ID 147e:2016 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

##### PCMCIA card info ##################

##### rfkill ############################

0: tpacpi_bluetooth_sw: Bluetooth
	Soft blocked: no
	Hard blocked: yes
1: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: yes

##### secure boot #######################

'mokutil' is not installed (package "mokutil").

##### lsmod #############################

iwldvm                229376  0
mac80211              778240  1 iwldvm
iwlwifi               278528  1 iwldvm
wmi_bmof               16384  0
cfg80211              622592  3 iwlwifi,mac80211,iwldvm
wmi                    24576  1 wmi_bmof

##### interfaces ########################

[/etc/network/interfaces]
auto lo
iface lo inet loopback

##### ifconfig ##########################

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback <MAC address> brd <MAC address>
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: enp0s25: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether <MAC 'enp0s25' [IF1]> brd <MAC address>
    inet 192.168.10.107/24 brd 192.168.10.255 scope global dynamic noprefixroute enp0s25
       valid_lft 86209sec preferred_lft 86209sec
    inet6 fe80::d5c9:5f37:b9a5:2c1c/64 scope link noprefixroute 
       valid_lft forever preferred_lft forever
3: wlp3s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether <MAC 'wlp3s0' [IF2]> brd <MAC address>

##### iwconfig ##########################

enp0s25   no wireless extensions.

lo        no wireless extensions.

wlp3s0    IEEE 802.11  ESSID:off/any  
          Mode:Managed  Access Point: Not-Associated   Tx-Power=off   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
          

##### route #############################

default via 192.168.10.1 dev enp0s25 proto dhcp metric 100 
169.254.0.0/16 dev enp0s25 scope link metric 1000 
192.168.10.0/24 dev enp0s25 proto kernel scope link src 192.168.10.107 metric 100 

##### resolv.conf #######################

[777 root '/etc/resolv.conf' -> '../run/systemd/resolve/stub-resolv.conf']

nameserver 127.0.0.53
search cfl.rr.com

##### network managers ##################

Installed:

	NetworkManager

Running:

root      3467     1  0 10:13 ?        00:00:00 /usr/sbin/NetworkManager --no-daemon

##### NetworkManager info ###############

GENERAL.DEVICE:                         enp0s25
GENERAL.TYPE:                           ethernet
GENERAL.NM-TYPE:                        NMDeviceEthernet
GENERAL.VENDOR:                         Intel Corporation
GENERAL.PRODUCT:                        82579LM Gigabit Network Connection (Lewisville) (ThinkPad T520)
GENERAL.DRIVER:                         e1000e
GENERAL.DRIVER-VERSION:                 3.2.6-k
GENERAL.FIRMWARE-VERSION:               0.13-3
GENERAL.HWADDR:                         <MAC 'enp0s25' [IF1]>
GENERAL.MTU:                            1500
GENERAL.STATE:                          100 (connected)
GENERAL.REASON:                         0 (No reason given)
GENERAL.UDI:                            /sys/devices/pci0000:00/0000:00:19.0/net/enp0s25
GENERAL.IP-IFACE:                       enp0s25
GENERAL.IS-SOFTWARE:                    no
GENERAL.NM-MANAGED:                     yes
GENERAL.AUTOCONNECT:                    yes
GENERAL.FIRMWARE-MISSING:               no
GENERAL.NM-PLUGIN-MISSING:              no
GENERAL.PHYS-PORT-ID:                   --
GENERAL.CONNECTION:                     Wired connection 1
GENERAL.CON-UUID:                       1e459bcc-0f4a-32b8-9bb1-a9f95acf527b
GENERAL.CON-PATH:                       /org/freedesktop/NetworkManager/ActiveConnection/1
GENERAL.METERED:                        no (guessed)
CAPABILITIES.CARRIER-DETECT:            yes
CAPABILITIES.SPEED:                     100 Mb/s
CAPABILITIES.IS-SOFTWARE:               no
CAPABILITIES.SRIOV:                     no
WIRED-PROPERTIES.CARRIER:               on
IP4.ADDRESS[1]:                         192.168.10.107/24
IP4.GATEWAY:                            192.168.10.1
IP4.ROUTE[1]:                           dst = 0.0.0.0/0, nh = 192.168.10.1, mt = 100
IP4.ROUTE[2]:                           dst = 192.168.10.0/24, nh = 0.0.0.0, mt = 100
IP4.ROUTE[3]:                           dst = 169.254.0.0/16, nh = 0.0.0.0, mt = 1000
IP4.DNS[1]:                             192.168.10.1
IP4.DOMAIN[1]:                          cfl.rr.com
DHCP4.OPTION[1]:                        requested_routers = 1
DHCP4.OPTION[2]:                        requested_domain_search = 1
DHCP4.OPTION[3]:                        requested_wpad = 1
DHCP4.OPTION[4]:                        requested_time_offset = 1
DHCP4.OPTION[5]:                        requested_broadcast_address = 1
DHCP4.OPTION[6]:                        requested_rfc3442_classless_static_routes = 1
DHCP4.OPTION[7]:                        requested_domain_name = 1
DHCP4.OPTION[8]:                        requested_netbios_scope = 1
DHCP4.OPTION[9]:                        domain_name = cfl.rr.com
DHCP4.OPTION[10]:                       next_server = 0.0.0.0
DHCP4.OPTION[11]:                       broadcast_address = 192.168.10.255
DHCP4.OPTION[12]:                       requested_interface_mtu = 1
DHCP4.OPTION[13]:                       requested_subnet_mask = 1
DHCP4.OPTION[14]:                       dhcp_lease_time = 86400
DHCP4.OPTION[15]:                       routers = 192.168.10.1
DHCP4.OPTION[16]:                       ip_address = 192.168.10.107
DHCP4.OPTION[17]:                       requested_domain_name_servers = 1
DHCP4.OPTION[18]:                       requested_static_routes = 1
DHCP4.OPTION[19]:                       subnet_mask = 255.255.255.0
DHCP4.OPTION[20]:                       expiry = 1542208442
DHCP4.OPTION[21]:                       domain_name_servers = 192.168.10.1
DHCP4.OPTION[22]:                       requested_netbios_name_servers = 1
DHCP4.OPTION[23]:                       requested_ntp_servers = 1
DHCP4.OPTION[24]:                       requested_ms_classless_static_routes = 1
DHCP4.OPTION[25]:                       dhcp_message_type = 5
DHCP4.OPTION[26]:                       network_number = 192.168.10.0
DHCP4.OPTION[27]:                       requested_host_name = 1
DHCP4.OPTION[28]:                       dhcp_server_identifier = 192.168.10.1
IP6.ADDRESS[1]:                         fe80::d5c9:5f37:b9a5:2c1c/64
IP6.GATEWAY:                            --
IP6.ROUTE[1]:                           dst = ff00::/8, nh = ::, mt = 256, table=255
IP6.ROUTE[2]:                           dst = fe80::/64, nh = ::, mt = 256
IP6.ROUTE[3]:                           dst = fe80::/64, nh = ::, mt = 100
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/{3}
CONNECTIONS.AVAILABLE-CONNECTIONS[1]:   1e459bcc-0f4a-32b8-9bb1-a9f95acf527b | Wired connection 1

GENERAL.DEVICE:                         wlp3s0
GENERAL.TYPE:                           wifi
GENERAL.NM-TYPE:                        NMDeviceWifi
GENERAL.VENDOR:                         Intel Corporation
GENERAL.PRODUCT:                        Centrino Advanced-N 6205 [Taylor Peak] (Centrino Advanced-N 6205 (802.11a/b/g/n))
GENERAL.DRIVER:                         iwlwifi
GENERAL.DRIVER-VERSION:                 4.15.0-20-generic
GENERAL.FIRMWARE-VERSION:               18.168.6.1
GENERAL.HWADDR:                         <MAC 'wlp3s0' [IF2]>
GENERAL.MTU:                            1500
GENERAL.STATE:                          20 (unavailable)
GENERAL.REASON:                         2 (Device is now managed)
GENERAL.UDI:                            /sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0/net/wlp3s0
GENERAL.IP-IFACE:                       --
GENERAL.IS-SOFTWARE:                    no
GENERAL.NM-MANAGED:                     yes
GENERAL.AUTOCONNECT:                    yes
GENERAL.FIRMWARE-MISSING:               no
GENERAL.NM-PLUGIN-MISSING:              no
GENERAL.PHYS-PORT-ID:                   --
GENERAL.CONNECTION:                     --
GENERAL.CON-UUID:                       --
GENERAL.CON-PATH:                       --
GENERAL.METERED:                        unknown
CAPABILITIES.CARRIER-DETECT:            no
CAPABILITIES.SPEED:                     unknown
CAPABILITIES.IS-SOFTWARE:               no
CAPABILITIES.SRIOV:                     no
WIFI-PROPERTIES.WEP:                    yes
WIFI-PROPERTIES.WPA:                    yes
WIFI-PROPERTIES.WPA2:                   yes
WIFI-PROPERTIES.TKIP:                   yes
WIFI-PROPERTIES.CCMP:                   yes
WIFI-PROPERTIES.AP:                     yes
WIFI-PROPERTIES.ADHOC:                  yes
WIFI-PROPERTIES.2GHZ:                   yes
WIFI-PROPERTIES.5GHZ:                   yes
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: --

SSID  BSSID  MODE  CHAN  FREQ  RATE  SIGNAL  BARS  SECURITY  ACTIVE  IN-USE 

##### NetworkManager.state ##############

[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true

##### NetworkManager config #############

[[/etc/NetworkManager/conf.d/default-wifi-powersave-on.conf]]
[connection]
wifi.powersave = 3

[[/etc/NetworkManager/NetworkManager.conf]]
[main]
plugins=ifupdown,keyfile
[ifupdown]
managed=false
[device]
wifi.scan-rand-mac-address=no

[[/usr/lib/NetworkManager/conf.d/10-dns-resolved.conf]]
[main]
dns=systemd-resolved

[[/usr/lib/NetworkManager/conf.d/10-globally-managed-devices.conf]]
[keyfile]
unmanaged-devices=*,except:type:wifi,except:type:wwan

[[/usr/lib/NetworkManager/conf.d/no-mac-addr-change.conf]]
[device-mac-addr-change-wifi]
match-device=driver:rtl8723bs,driver:rtl8189es,driver:r8188eu,driver:8188eu,driver:eagle_sdio,driver:wl
wifi.scan-rand-mac-address=no
wifi.cloned-mac-address=preserve
ethernet.cloned-mac-address=preserve

##### NetworkManager profiles ###########

Sorry, try again.
[[/etc/NetworkManager/system-connections/Default-7a19c36a-9cba-47ef-97f3-16c937ac85fc]] (600 root)
[connection] id=Default | type=wifi | permissions=user:rick:;
[wifi] mac-address=<MAC 'wlp3s0' [IF2]> | mac-address-blacklist= | ssid=Default
[ipv4] method=auto
[ipv6] method=auto

[[/etc/NetworkManager/system-connections/Default]] (600 root)
[connection] id=Default | type=wifi | permissions=user:mint:;
[wifi] mac-address=<MAC 'wlp3s0' [IF2]> | mac-address-blacklist= | ssid=Default
[ipv4] method=auto
[ipv6] method=auto

##### Netplan config ####################

[/etc/netplan/1-network-manager-all.yaml]
network:
  version: 2
  renderer: NetworkManager

##### iw reg get ########################

Region: America/New_York (based on set time zone)

global
country 00: DFS-UNSET
	(2402 - 2472 @ 40), (N/A, 20), (N/A)
	(2457 - 2482 @ 20), (N/A, 20), (N/A), AUTO-BW, PASSIVE-SCAN
	(2474 - 2494 @ 20), (N/A, 20), (N/A), NO-OFDM, PASSIVE-SCAN
	(5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW, PASSIVE-SCAN
	(5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW, PASSIVE-SCAN
	(5490 - 5730 @ 160), (N/A, 20), (0 ms), DFS, PASSIVE-SCAN
	(5735 - 5835 @ 80), (N/A, 20), (N/A), PASSIVE-SCAN
	(57240 - 63720 @ 2160), (N/A, 0), (N/A)

##### iwlist channels ###################

enp0s25   no frequency information.

lo        no frequency information.

wlp3s0    32 channels in total; available frequencies :
          Channel 01 : 2.412 GHz
          Channel 02 : 2.417 GHz
          Channel 03 : 2.422 GHz
          Channel 04 : 2.427 GHz
          Channel 05 : 2.432 GHz
          Channel 06 : 2.437 GHz
          Channel 07 : 2.442 GHz
          Channel 08 : 2.447 GHz
          Channel 09 : 2.452 GHz
          Channel 10 : 2.457 GHz
          Channel 11 : 2.462 GHz
          Channel 12 : 2.467 GHz
          Channel 13 : 2.472 GHz
          Channel 36 : 5.18 GHz
          Channel 40 : 5.2 GHz
          Channel 44 : 5.22 GHz
          Channel 48 : 5.24 GHz
          Channel 52 : 5.26 GHz
          Channel 56 : 5.28 GHz
          Channel 60 : 5.3 GHz
          Channel 64 : 5.32 GHz
          Channel 100 : 5.5 GHz
          Channel 104 : 5.52 GHz
          Channel 108 : 5.54 GHz
          Channel 112 : 5.56 GHz
          Channel 116 : 5.58 GHz
          Channel 120 : 5.6 GHz
          Channel 124 : 5.62 GHz
          Channel 128 : 5.64 GHz
          Channel 132 : 5.66 GHz
          Channel 136 : 5.68 GHz
          Channel 140 : 5.7 GHz

##### iwlist scan #######################

enp0s25   Interface doesn't support scanning.

wlp3s0    Interface doesn't support scanning : Network is down

lo        Interface doesn't support scanning.

##### module infos ######################

[iwldvm]
filename:       /lib/modules/4.15.0-20-generic/kernel/drivers/net/wireless/intel/iwlwifi/dvm/iwldvm.ko
license:        GPL
author:         Copyright(c) 2003- 2015 Intel Corporation <linuxwifi@intel.com>
description:    Intel(R) Wireless WiFi Link AGN driver for Linux
srcversion:     5144A889CD9311D5F87BAC3
depends:        mac80211,iwlwifi,cfg80211
retpoline:      Y
intree:         Y
name:           iwldvm
vermagic:       4.15.0-20-generic SMP mod_unload 
signat:         PKCS#7
signer:         
sig_key:        
sig_hashalgo:   md4
parm:           force_cam:force continuously aware mode (no power saving at all) (bool)

[mac80211]
filename:       /lib/modules/4.15.0-20-generic/kernel/net/mac80211/mac80211.ko
license:        GPL
description:    IEEE 802.11 subsystem
srcversion:     1CEA5CF286EDB289C1D0BF8
depends:        cfg80211
retpoline:      Y
intree:         Y
name:           mac80211
vermagic:       4.15.0-20-generic SMP mod_unload 
signat:         PKCS#7
signer:         
sig_key:        
sig_hashalgo:   md4
parm:           minstrel_vht_only:Use only VHT rates when VHT is supported by sta. (bool)
parm:           max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
parm:           max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
parm:           beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
parm:           probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
parm:           ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)

[iwlwifi]
filename:       /lib/modules/4.15.0-20-generic/kernel/drivers/net/wireless/intel/iwlwifi/iwlwifi.ko
license:        GPL
author:         Copyright(c) 2003- 2015 Intel Corporation <linuxwifi@intel.com>
description:    Intel(R) Wireless WiFi driver for Linux
firmware:       iwlwifi-100-5.ucode
firmware:       iwlwifi-1000-5.ucode
firmware:       iwlwifi-135-6.ucode
firmware:       iwlwifi-105-6.ucode
firmware:       iwlwifi-2030-6.ucode
firmware:       iwlwifi-2000-6.ucode
firmware:       iwlwifi-5150-2.ucode
firmware:       iwlwifi-5000-5.ucode
firmware:       iwlwifi-6000g2b-6.ucode
firmware:       iwlwifi-6000g2a-6.ucode
firmware:       iwlwifi-6050-5.ucode
firmware:       iwlwifi-6000-6.ucode
firmware:       iwlwifi-7265D-29.ucode
firmware:       iwlwifi-7265-17.ucode
firmware:       iwlwifi-3168-29.ucode
firmware:       iwlwifi-3160-17.ucode
firmware:       iwlwifi-7260-17.ucode
firmware:       iwlwifi-8265-34.ucode
firmware:       iwlwifi-8000C-34.ucode
firmware:       iwlwifi-9260-th-b0-jf-b0-34.ucode
firmware:       iwlwifi-9260-th-a0-jf-a0-34.ucode
firmware:       iwlwifi-9000-pu-a0-jf-b0-34.ucode
firmware:       iwlwifi-9000-pu-b0-jf-b0-34.ucode
firmware:       iwlwifi-9000-pu-a0-jf-a0-34.ucode
firmware:       iwlwifi-QuQnj-a0-hr-a0-34.ucode
firmware:       iwlwifi-QuQnj-a0-jf-b0-34.ucode
firmware:       iwlwifi-QuQnj-f0-hr-a0-34.ucode
firmware:       iwlwifi-Qu-a0-jf-b0-34.ucode
firmware:       iwlwifi-Qu-a0-hr-a0-34.ucode
srcversion:     CFFF5C162A83F2977E03473
depends:        cfg80211
retpoline:      Y
intree:         Y
name:           iwlwifi
vermagic:       4.15.0-20-generic SMP mod_unload 
signat:         PKCS#7
signer:         
sig_key:        
sig_hashalgo:   md4
parm:           swcrypto:using crypto in software (default 0 [hardware]) (int)
parm:           11n_disable:disable 11n functionality, bitmap: 1: full, 2: disable agg TX, 4: disable agg RX, 8 enable agg TX (uint)
parm:           amsdu_size:amsdu size 0: 12K for multi Rx queue devices, 4K for other devices 1:4K 2:8K 3:12K (default 0) (int)
parm:           fw_restart:restart firmware in case of error (default true) (bool)
parm:           antenna_coupling:specify antenna coupling in dB (default: 0 dB) (int)
parm:           nvm_file:NVM file name (charp)
parm:           d0i3_disable:disable d0i3 functionality (default: Y) (bool)
parm:           lar_disable:disable LAR functionality (default: N) (bool)
parm:           uapsd_disable:disable U-APSD functionality bitmap 1: BSS 2: P2P Client (default: 3) (uint)
parm:           bt_coex_active:enable wifi/bt co-exist (default: enable) (bool)
parm:           led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int)
parm:           power_save:enable WiFi power management (default: disable) (bool)
parm:           power_level:default power save level (range from 1 - 5, default: 1) (int)
parm:           fw_monitor:firmware monitor - to debug FW (default: false - needs lots of memory) (bool)
parm:           d0i3_timeout:Timeout to D0i3 entry when idle (ms) (uint)
parm:           disable_11ac:Disable VHT capabilities (default: false) (bool)

[cfg80211]
filename:       /lib/modules/4.15.0-20-generic/kernel/net/wireless/cfg80211.ko
description:    wireless configuration support
license:        GPL
author:         Johannes Berg
srcversion:     D5B0789D4C423C81CCFB437
depends:        
retpoline:      Y
intree:         Y
name:           cfg80211
vermagic:       4.15.0-20-generic SMP mod_unload 
signat:         PKCS#7
signer:         
sig_key:        
sig_hashalgo:   md4
parm:           bss_entries_limit:limit to number of scan BSS entries (per wiphy, default 1000) (int)
parm:           ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm:           cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)

##### module parameters #################

[iwldvm]
force_cam: Y

[mac80211]
beacon_loss_count: 7
ieee80211_default_rc_algo: minstrel_ht
max_nullfunc_tries: 2
max_probe_tries: 5
minstrel_vht_only: Y
probe_wait_ms: 500

[iwlwifi]
11n_disable: 0
amsdu_size: 0
antenna_coupling: 0
bt_coex_active: Y
d0i3_disable: Y
d0i3_timeout: 1000
disable_11ac: N
fw_monitor: N
fw_restart: Y
lar_disable: N
led_mode: 0
nvm_file: (null)
power_level: 0
power_save: N
swcrypto: 0
uapsd_disable: 3

[cfg80211]
bss_entries_limit: 1000
cfg80211_disable_40mhz_24ghz: N
ieee80211_regdom: 00

##### /etc/modules ######################

##### modprobe options ##################

[/etc/modprobe.d/blacklist-ath_pci.conf]
blacklist ath_pci

[/etc/modprobe.d/blacklist.conf]
blacklist evbug
blacklist usbmouse
blacklist usbkbd
blacklist eepro100
blacklist de4x5
blacklist eth1394
blacklist snd_intel8x0m
blacklist snd_aw2
blacklist prism54
blacklist bcm43xx
blacklist garmin_gps
blacklist asus_acpi
blacklist snd_pcsp
blacklist pcspkr
blacklist amd76x_edac

[/etc/modprobe.d/blacklist-rare-network.conf]
alias net-pf-3 off
alias net-pf-6 off
alias net-pf-9 off
alias net-pf-11 off
alias net-pf-12 off
alias net-pf-19 off
alias net-pf-21 off
alias net-pf-36 off

[/etc/modprobe.d/iwlwifi.conf]
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
&& /sbin/modprobe -r mac80211

##### rc.local ##########################

grep: /etc/rc.local: No such file or directory

##### pm-utils ##########################

##### udev rules ########################

##### dmesg #############################

[   20.046964] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[   20.214847] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[   20.265437] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   20.265440] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[   20.265442] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   20.265444] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[   20.271741] iwlwifi 0000:03:00.0: reporting RF_KILL (radio disabled)
[   20.271767] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio.
[   20.298336] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   20.300294] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[   28.740002] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready (repeated 2 times)
[   29.020762] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   31.594083] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[   31.594094] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
[   31.594145] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[  319.576409] e1000e: enp0s25 NIC Link is Down
[  797.801056] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[  797.803880] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[  841.410113] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[  841.410124] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
[  841.410175] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready

########## wireless info END ############
Second Command Results:

http://termbin.com/2ael

JeremyB
Level 19
Level 19
Posts: 9445
Joined: Fri Feb 21, 2014 8:17 am

Re: Linux Mint 19 MATE - No Wireless After Running Level 1 & 2 Updates

Post by JeremyB » Wed Nov 14, 2018 7:16 am


rbeltz48
Level 4
Level 4
Posts: 242
Joined: Mon Jan 16, 2012 3:08 pm
Location: Florida, USA

Re: Linux Mint 19 MATE - No Wireless After Running Level 1 & 2 Updates

Post by rbeltz48 » Wed Nov 14, 2018 7:51 am

Yes. I found this answer in another thread about wireless. I was trying to remove the DVD drive looking for the release button and I must have turned the wireless button off. Thanks for your help!

Post Reply

Return to “Wireless”