Connection issues after a kernel update.

Questions about WIFI networks and devices
Forum rules
Before you post please read how to get help
Post Reply
dalinar
Level 1
Level 1
Posts: 4
Joined: Tue Jul 03, 2018 1:30 pm

Connection issues after a kernel update.

Post by dalinar » Wed Nov 14, 2018 11:59 pm

Hi!

I love Linux Mint and would love to keep using it for as long as I can. I have a problem, though. After updating my kernel from 4.10.0-38 to 4.15.0-39. Before updating I can connect to the wifi in my apartment and on campus at my University. After updating, I can still connect to the wifi on campus, but I can't connect the wifi in my apartment. So, I rolled back to the first kernel and posted this. Can anyone help me with this?

The output of iwconfig is:

Code: Select all

    lo        no wireless extensions.

    wlo1      IEEE 802.11  ESSID:"optix"  
              Mode:Managed  Frequency:2.462 GHz  Access Point: 50:60:28:14:8D:A1   
              Bit Rate=72.2 Mb/s   Tx-Power=20 dBm   
              Retry short limit:7   RTS thr=2347 B   Fragment thr:off
              Power Management:off
              Link Quality=70/70  Signal level=-37 dBm  
              Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
              Tx excessive retries:0  Invalid misc:557   Missed beacon:0

    enp3s0    no wireless extensions.
The output of inxi -Fxz:

Code: Select all

    System:    Host: dalinar-HP-15-Notebook-PC Kernel: 4.10.0-38-generic x86_64 (64 bit gcc: 5.4.0)
               Desktop: Cinnamon 3.6.7 (Gtk 3.18.9-1ubuntu3.3)
               Distro: Linux Mint 18.3 Sylvia
    Machine:   System: HP (portable) product: HP 15 Notebook PC v: Type1 - ProductConfigId
               Mobo: Hewlett-Packard model: 233F v: 06.26
               Bios: Insyde v: F.25 date: 10/05/2015
    CPU:       Quad core Intel Pentium N3540 (-MCP-) cache: 1024 KB
               flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 17326
               clock speeds: max: 2665 MHz 1: 763 MHz 2: 750 MHz 3: 1223 MHz
               4: 858 MHz
    Graphics:  Card: Intel Atom Processor Z36xxx/Z37xxx Series Graphics & Display
               bus-ID: 00:02.0
               Display Server: X.Org 1.18.4 drivers: intel (unloaded: fbdev,vesa)
               Resolution: 1366x768@60.00hz
               GLX Renderer: Mesa DRI Intel Bay Trail
               GLX Version: 3.0 Mesa 18.0.5 Direct Rendering: Yes
    Audio:     Card Intel Atom Processor Z36xxx/Z37xxx Series High Definition Audio Controller
               driver: snd_hda_intel bus-ID: 00:1b.0
               Sound: Advanced Linux Sound Architecture v: k4.10.0-38-generic
    Network:   Card-1: Realtek RTL8188EE Wireless Network Adapter
               driver: rtl8188ee port: 2000 bus-ID: 02:00.0
               IF: wlo1 state: up mac: <filter>
               Card-2: Realtek RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller
               driver: r8169 v: 2.3LK-NAPI port: 1000 bus-ID: 03:00.0
               IF: enp3s0 state: down mac: <filter>
    Drives:    HDD Total Size: 500.1GB (3.7% used)
               ID-1: /dev/sda model: HGST_HTS545050A7 size: 500.1GB
    Partition: ID-1: / size: 455G used: 14G (4%) fs: ext4 dev: /dev/sda1
               ID-2: swap-1 size: 4.18GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
    RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
    Sensors:   System Temperatures: cpu: 54.0C mobo: N/A
               Fan Speeds (in rpm): cpu: N/A
    Info:      Processes: 199 Uptime: 14 min Memory: 1925.7/3844.5MB
               Init: systemd runlevel: 5 Gcc sys: 5.4.0
               Client: Shell (bash 4.3.481) inxi: 2.2.35


I have already tested for soft and hard blocks and that's not the case.
I would really appreciate help on this.

Post Reply

Return to “Wireless”