Hello
Yesterday I installed a fresh version of Mint Cinamon.
It works very well in exception of the Wifi Connection.
The connect does work, but in case i reach out to any addresses, there is no traffic at all.
It works fine via LAN.
Are there any hints , switchs, buttons i have to amend ?
rgrds
[SOLVED] Wifi x230
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
[SOLVED] Wifi x230
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 2 times in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
- Pjotr
- Level 24
- Posts: 20142
- Joined: Mon Mar 07, 2011 10:18 am
- Location: The Netherlands (Holland) 🇳🇱
- Contact:
Re: Wifi x230
Please generate an overview of your system like this:
- Launch a terminal window (this is how to launch a terminal window);
- make the terminal window full screen, to avoid chopped lines;
- Copy/paste this command into the terminal:
(if you type: the letter F is a capital letter)
Press Enter.
Copy/paste the output in your next message.
Do the same with the following four commands:
- Launch a terminal window (this is how to launch a terminal window);
- make the terminal window full screen, to avoid chopped lines;
- Copy/paste this command into the terminal:
Code: Select all
inxi -Fxz
Press Enter.
Copy/paste the output in your next message.
Do the same with the following four commands:
Code: Select all
rfkill list all
Code: Select all
iwconfig
Code: Select all
lsusb
Code: Select all
lspci
Tip: 10 things to do after installing Linux Mint 21.3 Virginia
Keep your Linux Mint healthy: Avoid these 10 fatal mistakes
Twitter: twitter.com/easylinuxtips
All in all, horse sense simply makes sense.
Keep your Linux Mint healthy: Avoid these 10 fatal mistakes
Twitter: twitter.com/easylinuxtips
All in all, horse sense simply makes sense.
Re: Wifi x230
Code: Select all
m8tin@m8tin-ThinkPad-X230:~$ inxi -Fxz
System: Host: m8tin-ThinkPad-X230 Kernel: 4.15.0-50-generic x86_64 bits: 64 compiler: gcc v: 7.3.0 Desktop: Cinnamon 4.0.10
Distro: Linux Mint 19.1 Tessa base: Ubuntu 18.04 bionic
Machine: Type: Laptop System: LENOVO product: 23255T8 v: ThinkPad X230 serial: <filter>
Mobo: LENOVO model: 23255T8 serial: <filter> UEFI [Legacy]: LENOVO v: G2ETA1WW (2.61 ) date: 04/22/2014
Battery: ID-1: BAT0 charge: 34.0 Wh condition: 34.5/57.7 Wh (60%) model: LGC 45N1025 status: Unknown
CPU: Topology: Dual Core model: Intel Core i5-3320M bits: 64 type: MT MCP arch: Ivy Bridge rev: 9 L2 cache: 3072 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 20751
Speed: 1197 MHz min/max: 1200/3300 MHz Core speeds (MHz): 1: 1197 2: 1197 3: 1197 4: 1197
Graphics: Device-1: Intel 3rd Gen Core processor Graphics vendor: Lenovo driver: i915 v: kernel bus ID: 00:02.0
Display: x11 server: X.Org 1.19.6 driver: modesetting unloaded: fbdev,vesa resolution: 1366x768~60Hz
OpenGL: renderer: Mesa DRI Intel Ivybridge Mobile v: 4.2 Mesa 18.2.8 direct render: Yes
Audio: Device-1: Intel 7 Series/C216 Family High Definition Audio vendor: Lenovo driver: snd_hda_intel v: kernel
bus ID: 00:1b.0
Sound Server: ALSA v: k4.15.0-50-generic
Network: Device-1: Intel 82579LM Gigabit Network vendor: Lenovo driver: e1000e v: 3.2.6-k port: 5080 bus ID: 00:19.0
IF: enp0s25 state: down mac: <filter>
Device-2: Intel Centrino Advanced-N 6205 [Taylor Peak] driver: iwlwifi v: kernel port: efa0 bus ID: 03:00.0
IF: wlp3s0 state: up mac: <filter>
Drives: Local Storage: total: 465.76 GiB used: 17.81 GiB (3.8%)
ID-1: /dev/sda vendor: Samsung model: SSD 850 EVO 500GB size: 465.76 GiB
Partition: ID-1: / size: 457.45 GiB used: 17.81 GiB (3.9%) fs: ext4 dev: /dev/sda1
Sensors: System Temperatures: cpu: 47.0 C mobo: N/A
Fan Speeds (RPM): cpu: 1779
Info: Processes: 196 Uptime: 25m Memory: 15.37 GiB used: 2.30 GiB (14.9%) Init: systemd runlevel: 5 Compilers: gcc: 7.4.0
Shell: bash v: 4.4.19 inxi: 3.0.27
m8tin@m8tin-ThinkPad-X230:~$
Code: Select all
m8tin@m8tin-ThinkPad-X230:~$ rfkill list all
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
m8tin@m8tin-ThinkPad-X230:~$
__________________________
Code: Select all
iwm8tin@m8tin-ThinkPad-X230:~$ iwconfig
lo no wireless extensions.
enp0s25 no wireless extensions.
wlp3s0 IEEE 802.11 ESSID:"HITRON-A7E0"
Mode:Managed Frequency:2.437 GHz Access Point: 84:94:8C:FA:A7:E8
Bit Rate=58.5 Mb/s Tx-Power=15 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:on
Link Quality=70/70 Signal level=-24 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:311 Missed beacon:0
m8tin@m8tin-ThinkPad-X230:~$
___________________________________
Code: Select all
lsm8tin@m8tin-ThinkPad-X230:~$ lsusb
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 04f2:b2eb Chicony Electronics Co., Ltd
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Code: Select all
m8tin@m8tin-ThinkPad-X230:~$ lspci
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C216 Chipset Family MEI Controller #1 (rev 04)
00:16.3 Serial controller: Intel Corporation 7 Series/C210 Series Chipset Family KT Controller (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (Lewisville) (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C216 Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C216 Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM77 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C216 Chipset Family SMBus Controller (rev 04)
02:00.0 System peripheral: Ricoh Co Ltd PCIe SDXC/MMC Host Controller (rev 07)
03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] (rev 34)
m8tin@m8tin-ThinkPad-X230:~$
Last edited by Moem on Mon Jun 24, 2019 1:58 pm, edited 1 time in total.
Reason: Adding [code] tags. They retain some formatting that makes your output easier to read.
Reason: Adding [code] tags. They retain some formatting that makes your output easier to read.
Re: Wifi x230
[Resolved]
I disabled Wifi Mode 11n and left Wifi 11 B/G active. Now it works.
I disabled Wifi Mode 11n and left Wifi 11 B/G active. Now it works.