WiFi stops working

[silveroneill]

hi everyone... im new linux user so i still learning about sistem and other stuff... so far im really happy with sistem but i have one problem with WiFi...
when i surfing my wifi stop working but icons showing like is connected... sometimes i can surf 1 minute and he stop but sometimes can take longer...
can anyone have idea whatsa going on?
p.s. - i didnt have that problem whit windows...

[sleeper12]

Post the results of:

Code: Select all

 rfkill list && iwconfig && mokutil --sb-state 

[silveroneill]

Here:

Code: Select all

0: hci0: Bluetooth
	Soft blocked: no
	Hard blocked: no
1: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: no
2: hp-wifi: Wireless LAN
	Soft blocked: no
	Hard blocked: no
3: hp-bluetooth: Bluetooth
	Soft blocked: no
	Hard blocked: no
lo        no wireless extensions.

ens5      no wireless extensions.

wlo1      IEEE 802.11  ESSID:"ZDRAVKO"  
          Mode:Managed  Frequency:2.442 GHz  Access Point: C8:0C:C8:2A:66:5C   
          Bit Rate=121.5 Mb/s   Tx-Power=20 dBm   
          Retry short  long limit:2   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality=67/70  Signal level=-43 dBm  
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:1  Invalid misc:45   Missed beacon:0

EFI variables are not supported on this system

[sleeper12]

I don't see a problem with anything there. Let's see:

Code: Select all

 inxi -Fxxxz 

[silveroneill]

Code: Select all

System:    Kernel: 5.4.0-70-generic x86_64 bits: 64 compiler: gcc v: 9.3.0 Desktop: Cinnamon 4.8.6 wm: muffin 4.8.1 
           dm: LightDM 1.30.0 Distro: Linux Mint 20.1 Ulyssa base: Ubuntu 20.04 focal 
Machine:   Type: Laptop System: Hewlett-Packard product: HP ProBook 4720s v: N/A serial: <filter> Chassis: type: 10 
           serial: <filter> 
           Mobo: Hewlett-Packard model: 1411 v: KBC Version 57.31 serial: <filter> BIOS: Hewlett-Packard v: 68AZZ Ver. F.0C 
           date: 12/06/2010 
Battery:   ID-1: BAT0 charge: 2.5 Wh condition: 17.7/47.5 Wh (37%) volts: 8.0/10.8 model: Hewlett-Packard Primary type: Li-ion 
           serial: <filter> status: Unknown 
CPU:       Topology: Dual Core model: Intel Pentium P6200 bits: 64 type: MCP arch: Nehalem rev: 5 L2 cache: 3072 KiB 
           flags: lm nx pae sse sse2 sse3 ssse3 bogomips: 8512 
           Speed: 931 MHz min/max: 933/2133 MHz Core speeds (MHz): 1: 931 2: 947 
Graphics:  Device-1: Advanced Micro Devices [AMD/ATI] Park [Mobility Radeon HD 5430/5450/5470] vendor: Hewlett-Packard 
           driver: radeon v: kernel bus ID: 01:00.0 chip ID: 1002:68e0 
           Display: x11 server: X.Org 1.20.9 driver: ati,radeon unloaded: fbdev,modesetting,vesa resolution: 1366x768~60Hz 
           OpenGL: renderer: AMD CEDAR (DRM 2.50.0 / 5.4.0-70-generic LLVM 11.0.0) v: 3.3 Mesa 20.2.6 compat-v: 3.1 
           direct render: Yes 
Audio:     Device-1: Intel 5 Series/3400 Series High Definition Audio vendor: Hewlett-Packard driver: snd_hda_intel v: kernel 
           bus ID: 00:1b.0 chip ID: 8086:3b56 
           Device-2: Advanced Micro Devices [AMD/ATI] Cedar HDMI Audio [Radeon HD 5400/6300/7300 Series] 
           vendor: Hewlett-Packard driver: snd_hda_intel v: kernel bus ID: 01:00.1 chip ID: 1002:aa68 
           Sound Server: ALSA v: k5.4.0-70-generic 
Network:   Device-1: Ralink RT3090 Wireless 802.11n 1T/1R PCIe vendor: Hewlett-Packard driver: rt2800pci v: 2.3.0 port: 5000 
           bus ID: 44:00.0 chip ID: 1814:3090 
           IF: wlo1 state: up mac: <filter> 
           Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Hewlett-Packard driver: r8169 v: kernel 
           port: 2000 bus ID: 45:00.0 chip ID: 10ec:8168 
           IF: ens5 state: down mac: <filter> 
           Device-3: Ralink Motorola BC4 Bluetooth 3.0+HS Adapter type: USB driver: btusb bus ID: 2-1.6:4 chip ID: 148f:1000 
Drives:    Local Storage: total: 111.79 GiB used: 10.15 GiB (9.1%) 
           ID-1: /dev/sda vendor: Kingston model: SA400S37120G size: 111.79 GiB speed: 3.0 Gb/s serial: <filter> rev: B1E1 
           scheme: MBR 
Partition: ID-1: / size: 109.04 GiB used: 10.15 GiB (9.3%) fs: ext4 dev: /dev/sda5 
Sensors:   System Temperatures: cpu: 52.0 C mobo: N/A gpu: radeon temp: 59 C 
           Fan Speeds (RPM): N/A 
Info:      Processes: 178 Uptime: 34m Memory: 7.63 GiB used: 1.10 GiB (14.5%) Init: systemd v: 245 runlevel: 5 Compilers: 
           gcc: 9.3.0 alt: 9 Shell: bash v: 5.0.17 running in: gnome-terminal inxi: 3.0.38 

[sleeper12]

Again, I see no obvious problem. Until someone else jumps in, you might try shutting down & restart your router & machine.

[hglee]

Network: Ralink RT3090 Wireless 802.11n 1T/1R PCIe driver: rt2800pci v: 2.3.0 port: 5000

Open a Terminal (Ctrl-Alt-T), copy-and-paste the following command-line, then tap Enter...

Code: Select all

echo "options rt2800pci  nohwcrypt=1" | sudo tee /etc/modprobe.d/rt2800pci.conf

Reboot.

[silveroneill]

thank you guys... i'll test now then we will see...

[silveroneill]

so far seems to be ok... ill post if problem shows again...
ty guys