Screen problem

Forum rules
Before you post please read how to get help
omik
Level 1
Level 1
Posts: 2
Joined: Thu Sep 07, 2017 3:28 pm

Screen problem

Postby omik » Thu Sep 07, 2017 3:43 pm

When I start my computer when the display is off and turn on the display afterwards there is no screen. Maybe the xserver does not start when there is no display while booting or it does not recognize the display... Any ideas what I should do?

Hoser Rob
Level 9
Level 9
Posts: 2888
Joined: Sat Dec 15, 2012 8:57 am

Re: Screen problem

Postby Hoser Rob » Thu Sep 07, 2017 4:27 pm

omik wrote:When I start my computer when the display is off and turn on the display afterwards there is no screen. Maybe the xserver does not start when there is no display while booting or it does not recognize the display... Any ideas what I should do?


Can't do much without more info. Copy/paste this into the terminal and copy/paste the text output here:

Code: Select all

inxi -Fxz

omik
Level 1
Level 1
Posts: 2
Joined: Thu Sep 07, 2017 3:28 pm

Re: Screen problem

Postby omik » Thu Sep 07, 2017 5:14 pm

Hoser Rob wrote:
omik wrote:When I start my computer when the display is off and turn on the display afterwards there is no screen. Maybe the xserver does not start when there is no display while booting or it does not recognize the display... Any ideas what I should do?


Can't do much without more info. Copy/paste this into the terminal and copy/paste the text output here:

Code: Select all

inxi -Fxz


here is the output;

    System: Host: oto-MediaPC Kernel: 4.8.0-53-generic x86_64 (64 bit gcc: 5.4.0)
    Desktop: KDE Plasma 5.8.7 (Qt 5.6.1) Distro: Linux Mint 18.2 Sonya
    Machine: Mobo: GIGABYTE model: GA-H61TN-00 Bios: American Megatrends v: F1 date: 02/21/2013
    CPU: Dual core Intel Core i3-3220T (-HT-MCP-) cache: 3072 KB
    flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 11174
    clock speeds: max: 2800 MHz 1: 2222 MHz 2: 2256 MHz 3: 2051 MHz 4: 2255 MHz
    Graphics: Card: Intel Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller bus-ID: 00:02.0
    Display Server: X.Org 1.18.4 drivers: intel (unloaded: fbdev,vesa) Resolution: 1920x1080@60.00hz
    GLX Renderer: Mesa DRI Intel Ivybridge Desktop GLX Version: 3.0 Mesa 12.0.6 Direct Rendering: Yes
    Audio: Card Intel 6 Series/C200 Series Family High Definition Audio Controller
    driver: snd_hda_intel bus-ID: 00:1b.0
    Sound: Advanced Linux Sound Architecture v: k4.8.0-53-generic
    Network: Card-1: Intel Centrino Wireless-N 1030 [Rainbow Peak] driver: iwlwifi bus-ID: 02:00.0
    IF: wlp2s0 state: down mac: <filter>
    Card-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
    driver: r8169 v: 2.3LK-NAPI port: e000 bus-ID: 03:00.0
    IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
    Drives: HDD Total Size: 2000.4GB (52.6% used) ID-1: /dev/sda model: WDC_WD20EZRZ size: 2000.4GB
    Partition: ID-1: / size: 94G used: 6.1G (7%) fs: ext4 dev: /dev/sda5
    ID-2: /home size: 1.7T used: 967G (59%) fs: ext4 dev: /dev/sda3
    ID-3: swap-1 size: 8.19GB used: 0.00GB (0%) fs: swap dev: /dev/sda1
    RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
    Sensors: System Temperatures: cpu: 62.0C mobo: 27.8C
    Fan Speeds (in rpm): cpu: N/A
    Info: Processes: 194 Uptime: 4:43 Memory: 1516.9/3843.1MB Init: systemd runlevel: 5 Gcc sys: 5.4.0
    Client: Shell (bash 4.3.481) inxi: 2.2.35

maybe useful - I use TV as a monitor connected via HDMI


Return to “KDE”