Screen problem

[omik]

When I start my computer when the display is off and turn on the display afterwards there is no screen. Maybe the xserver does not start when there is no display while booting or it does not recognize the display... Any ideas what I should do?

[Hoser Rob]

When I start my computer when the display is off and turn on the display afterwards there is no screen. Maybe the xserver does not start when there is no display while booting or it does not recognize the display... Any ideas what I should do?

Can't do much without more info. Copy/paste this into the terminal and copy/paste the text output here:

Code: Select all

inxi -Fxz

[omik]

When I start my computer when the display is off and turn on the display afterwards there is no screen. Maybe the xserver does not start when there is no display while booting or it does not recognize the display... Any ideas what I should do?

Can't do much without more info. Copy/paste this into the terminal and copy/paste the text output here:

Code: Select all

inxi -Fxz

here is the output;

• System: Host: oto-MediaPC Kernel: 4.8.0-53-generic x86_64 (64 bit gcc: 5.4.0)
  Desktop: KDE Plasma 5.8.7 (Qt 5.6.1) Distro: Linux Mint 18.2 Sonya
  Machine: Mobo: GIGABYTE model: GA-H61TN-00 Bios: American Megatrends v: F1 date: 02/21/2013
  CPU: Dual core Intel Core i3-3220T (-HT-MCP-) cache: 3072 KB
  flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 11174
  clock speeds: max: 2800 MHz 1: 2222 MHz 2: 2256 MHz 3: 2051 MHz 4: 2255 MHz
  Graphics: Card: Intel Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller bus-ID: 00:02.0
  Display Server: X.Org 1.18.4 drivers: intel (unloaded: fbdev,vesa) Resolution: 1920x1080@60.00hz
  GLX Renderer: Mesa DRI Intel Ivybridge Desktop GLX Version: 3.0 Mesa 12.0.6 Direct Rendering: Yes
  Audio: Card Intel 6 Series/C200 Series Family High Definition Audio Controller
  driver: snd_hda_intel bus-ID: 00:1b.0
  Sound: Advanced Linux Sound Architecture v: k4.8.0-53-generic
  Network: Card-1: Intel Centrino Wireless-N 1030 [Rainbow Peak] driver: iwlwifi bus-ID: 02:00.0
  IF: wlp2s0 state: down mac: <filter>
  Card-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
  driver: r8169 v: 2.3LK-NAPI port: e000 bus-ID: 03:00.0
  IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
  Drives: HDD Total Size: 2000.4GB (52.6% used) ID-1: /dev/sda model: WDC_WD20EZRZ size: 2000.4GB
  Partition: ID-1: / size: 94G used: 6.1G (7%) fs: ext4 dev: /dev/sda5
  ID-2: /home size: 1.7T used: 967G (59%) fs: ext4 dev: /dev/sda3
  ID-3: swap-1 size: 8.19GB used: 0.00GB (0%) fs: swap dev: /dev/sda1
  RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
  Sensors: System Temperatures: cpu: 62.0C mobo: 27.8C
  Fan Speeds (in rpm): cpu: N/A
  Info: Processes: 194 Uptime: 4:43 Memory: 1516.9/3843.1MB Init: systemd runlevel: 5 Gcc sys: 5.4.0
  Client: Shell (bash 4.3.481) inxi: 2.2.35

maybe useful - I use TV as a monitor connected via HDMI