Display settings

Forum rules
Before you post please read how to get help
Post Reply
User avatar
Alex_L
Level 2
Level 2
Posts: 96
Joined: Mon Aug 11, 2014 6:59 am

Display settings

Post by Alex_L » Mon May 07, 2018 3:26 am

Hi

I have two monitors connected to my KDE Box.

Since a while, the displays only showed up with the wrong resolution. To correct that, I have to go to system settings->Display and monitor->Displays and correct the values by hand. Then I click on Apply and all is ok.
But when I logged out and in again, the displays have only a resolution of 1024x768, which is not the wished size.
Where are these settings stored, or how can I store these values to have them right in my session without modifying them by hand.


inxi -Fxz:
System: Host: Linux Kernel: 4.13.0-39-generic x86_64 (64 bit gcc: 5.4.0)
Desktop: KDE Plasma 5.8.9 (Qt 5.6.1) Distro: Linux Mint 18.3 Sylvia
Machine: System: innotek product: VirtualBox v: 1.2
Mobo: Oracle model: VirtualBox v: 1.2 Bios: innotek v: VirtualBox date: 12/01/2006
CPU: Quad core Intel Core i5-4590S (-MCP-) cache: 6144 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3) bmips: 23944
clock speeds: max: 2993 MHz 1: 2993 MHz 2: 2993 MHz 3: 2993 MHz 4: 2993 MHz
Graphics: Card: InnoTek Systemberatung VirtualBox Graphics Adapter bus-ID: 00:02.0
Display Server: X.Org 1.18.4 drivers: vboxvideo (unloaded: fbdev,vesa)
Resolution: 1920x1080@60.00hz, 1600x1200@60.00hz
GLX Renderer: llvmpipe (LLVM 5.0, 256 bits) GLX Version: 3.0 Mesa 17.2.8 Direct Rendering: Yes
Audio: Card-1 Intel 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller
driver: snd_hda_intel bus-ID: 00:05.0
Card-2 Logitech Headset H340 driver: USB Audio usb-ID: 001-003
Sound: Advanced Linux Sound Architecture v: k4.13.0-39-generic
Network: Card: Intel 82540EM Gigabit Ethernet Controller
driver: e1000 v: 7.3.21-k8-NAPI port: d010 bus-ID: 00:03.0
IF: enp0s3 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 60.0GB (83.5% used) ID-1: /dev/sda model: VBOX_HARDDISK size: 60.0GB
Partition: ID-1: / size: 50G used: 42G (89%) fs: ext4 dev: /dev/sda1
ID-2: swap-1 size: 5.42GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: None detected - is lm-sensors installed and configured?
Info: Processes: 182 Uptime: 13 min Memory: 1365.2/5965.8MB Init: systemd runlevel: 5 Gcc sys: 5.4.0
Client: Shell (bash 4.3.481) inxi: 2.2.35


Thanx a lot
Last edited by Alex_L on Tue Jun 19, 2018 9:51 am, edited 2 times in total.

User avatar
Alex_L
Level 2
Level 2
Posts: 96
Joined: Mon Aug 11, 2014 6:59 am

[Solved] Display settings

Post by Alex_L » Mon May 14, 2018 3:12 pm

I finally found the solution of the problem: Simply reconfigure X by typing in a terminal (no X):
sudo dpkg-reconfigure xserver-xorg

That's all.

I found the solution on: https://ubuntuforums.org/showthread.php?t=690760

Al

Post Reply

Return to “KDE”