I recently installed LM 19.3 Tricia XFCE 32 bit on an old Dell laptop. When I close it running and open it, put in the password, the screen is black with the cursor. The same thing happens if it has been sitting, times out, and requires a password to resume. Black screen with cursor. The only way I've found to resume work is kill the power and reboot. In the XFCE forum, someone came up with a script to fix a 64 bit XFCE version but I couldn't get it to work on this 32 bit version. Anyone with ideas?
Thanks
Notebok opening & enter password doesn't resume screen
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Notebok opening & enter password doesn't resume screen
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 1 time in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Re: Notebok opening & enter password doesn't resume screen
What issue did the script address?
Please give us information about your install by entering this command in a terminal:
Click
Please give us information about your install by entering this command in a terminal:
inxi -Fxxxrz
Click
</>
from the mini toolbar above the textbox where you type your reply and then place your cursor between the code markers and paste the results of the command between the code markers [code]
Results[/code]
. This will let us know how Mint sees your hardware.A woman typing on a laptop with LM20.3 Cinnamon.
Re: Notebok opening & enter password doesn't resume screen
Code: Select all
user@user-MM061:~$ inxi -Fxxxrz
System:
Host: user-MM061 Kernel: 5.4.0-72-generic i686 bits: 32 compiler: gcc
v: 7.5.0 Desktop: Xfce 4.14.1 tk: Gtk 3.22.30 info: xfce4-panel wm: xfwm4
dm: LightDM 1.26.0 Distro: Linux Mint 19.3 Tricia
base: Ubuntu 18.04 bionic
Machine:
Type: Portable System: Dell product: MM061 v: N/A serial: <filter>
Chassis: type: 8 serial: <filter>
Mobo: Dell model: 0KD882 serial: <filter> BIOS: Dell v: A12
date: 12/18/2006
Battery:
ID-1: BAT0 charge: 45.9 Wh condition: 45.9/53.3 Wh (86%) volts: 12.5/11.1
model: Sanyo DELLUD2646 type: Li-ion serial: <filter> status: Full
CPU:
Topology: Dual Core model: Intel T2250 bits: 32 type: MCP arch: M Yonah
rev: 8 L2 cache: 2048 KiB
flags: nx pae sse sse2 sse3 bogomips: 6915
Speed: 798 MHz min/max: 800/1733 MHz Core speeds (MHz): 1: 798 2: 798
Graphics:
Device-1: Intel Mobile 945GM/GMS 943/940GML Express Integrated Graphics
vendor: Dell driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:27a2
Display: x11 server: X.Org 1.20.8 driver: intel
unloaded: fbdev,modesetting,vesa resolution: 1280x800~60Hz
OpenGL: renderer: Mesa DRI Intel 945GM x86/MMX/SSE2 v: 1.4 Mesa 20.0.8
direct render: Yes
Audio:
Device-1: Intel NM10/ICH7 Family High Definition Audio vendor: Dell
driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:27d8
Sound Server: ALSA v: k5.4.0-72-generic
Network:
Device-1: Broadcom and subsidiaries BCM4401-B0 100Base-TX
vendor: Dell Inspiron 6400 driver: b44 v: 2.0 port: 10c0 bus ID: 03:00.0
chip ID: 14e4:170c
Device-2: Broadcom and subsidiaries BCM4311 802.11b/g WLAN
vendor: Dell Wireless 1390 driver: b43-pci-bridge v: N/A port: 10c0
bus ID: 0b:00.0 chip ID: 14e4:4311
Device-3: Ralink MT7601U Wireless Adapter type: USB driver: mt7601u
bus ID: 1-3:3 chip ID: 148f:7601 serial: <filter>
IF: wlxc83a35c213b6 state: up mac: <filter>
IF-ID-1: eth0 state: down mac: <filter>
Drives:
Local Storage: total: 82.03 GiB used: 8.66 GiB (10.6%)
ID-1: /dev/sda vendor: Hitachi model: HTS541680J9SA00 size: 74.53 GiB
speed: <unknown> serial: <filter> rev: C74P scheme: MBR
ID-2: /dev/sdb type: USB model: SMI USB DISK size: 7.50 GiB
serial: <filter> rev: 1100 scheme: MBR
Partition:
ID-1: / size: 72.86 GiB used: 8.66 GiB (11.9%) fs: ext4 dev: /dev/sda1
Sensors:
System Temperatures: cpu: 37.0 C mobo: N/A sodimm: 47.0 C
Fan Speeds (RPM): cpu: 2387
Repos:
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
1: deb http://packages.linuxmint.com tricia main upstream import backport #id:linuxmint_main
2: deb http://archive.ubuntu.com/ubuntu bionic main restricted universe multiverse
3: deb http://archive.ubuntu.com/ubuntu bionic-updates main restricted universe multiverse
4: deb http://archive.ubuntu.com/ubuntu bionic-backports main restricted universe multiverse
5: deb http://security.ubuntu.com/ubuntu/ bionic-security main restricted universe multiverse
6: deb http://archive.canonical.com/ubuntu/ bionic partner
Info:
Processes: 163 Uptime: 33m Memory: 987.4 MiB used: 456.8 MiB (46.3%)
Init: systemd v: 237 runlevel: 5 Compilers: gcc: 7.5.0 alt: 7 Shell: bash
v: 4.4.20 running in: xfce4-terminal inxi: 3.0.32
user@user-MM061:~$
Re: Notebok opening & enter password doesn't resume screen
Other than the fact your computer runs on the older Intel display driver, nothing catches my eye with your data. Often, the blinking cursor is related to graphics driver. I do not know if that is the case in your situation.
It is possible there might be an interaction between the screensaver and the power management, but I am not familiar with how that works in Xfce.
If the last boot was one which ended with you pressing the power button to restart, run the following command in a terminal:
That command prints the journal log information of the prior boot cycle (the one which you stopped with the power button) in reverse order (so the reason for the problem should be near the top) and sends it to termbin. It will return with a url address that you should post in your next reply if you would like others to help you review it.
It is possible there might be an interaction between the screensaver and the power management, but I am not familiar with how that works in Xfce.
If the last boot was one which ended with you pressing the power button to restart, run the following command in a terminal:
journalctl -rb -1 | nc termbin.com 9999
That command prints the journal log information of the prior boot cycle (the one which you stopped with the power button) in reverse order (so the reason for the problem should be near the top) and sends it to termbin. It will return with a url address that you should post in your next reply if you would like others to help you review it.
A woman typing on a laptop with LM20.3 Cinnamon.