The "Eat My Specs" thread - Post your specs

Chat about just about anything else
User avatar
catweazel
Level 19
Level 19
Posts: 9890
Joined: Fri Oct 12, 2012 9:44 pm
Location: Australian Antarctic Territory

The "Eat My Specs" thread - Post your specs

Post by catweazel »

Image

Code: Select all

boot@Z390:~$ inxi -Fxz
System:    Host: Z390 Kernel: 4.18.0-16-lowlatency x86_64 bits: 64 gcc: 7.3.0
           Desktop: KDE Plasma 5.15.2 (Qt 5.12.0) Distro: KDE neon User Edition 5.15
Machine:   Device: desktop System: Gigabyte product: Z390 AORUS ELITE serial: N/A
           Mobo: Gigabyte model: Z390 AORUS ELITE-CF v: x.x serial: N/A
           UEFI: American Megatrends v: F7d date: 01/16/2019
CPU:       8 core Intel Core i9-9900K (-MT-MCP-) arch: Skylake rev.12 cache: 16384 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 57600
           clock speeds: max: 5000 MHz 1: 5000 MHz 2: 5000 MHz 3: 5000 MHz 4: 5000 MHz 5: 5000 MHz
           6: 5000 MHz 7: 5000 MHz 8: 5000 MHz 9: 5000 MHz 10: 5000 MHz 11: 5000 MHz 12: 5000 MHz
           13: 5000 MHz 14: 5000 MHz 15: 5000 MHz 16: 5000 MHz
Graphics:  Card: NVIDIA Device 1e82 bus-ID: 01:00.0
           Display Server: x11 (X.Org 1.20.1 ) driver: nvidia
           Resolution: 2560x1440@59.95hz, 2560x1440@59.95hz
           OpenGL: renderer: GeForce RTX 2080/PCIe/SSE2 version: 4.6.0 NVIDIA 415.27 Direct Render: Yes
Audio:     Card-1 Intel Cannon Lake PCH cAVS driver: snd_hda_intel bus-ID: 00:1f.3
           Card-2 NVIDIA Device 10f8 driver: snd_hda_intel bus-ID: 01:00.1
           Sound: Advanced Linux Sound Architecture v: k4.18.0-16-lowlatency
Network:   Card-1: Intel Ethernet Connection (7) I219-V driver: e1000e v: 3.2.6-k bus-ID: 00:1f.6
           IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
           Card-2: Intel 82574L Gigabit Network Connection
           driver: e1000e v: 3.2.6-k port: 3000 bus-ID: 05:00.0
           IF: enp5s0 state: down mac: <filter>
Drives:    HDD Total Size: 12865.2GB (49.1% used)
           ID-1: /dev/sda model: HWRAID size: 11982.9GB
           ID-2: /dev/nvme0n1 model: Samsung_SSD_970_EVO_250GB size: 250.1GB
           ID-3: /dev/sdc model: Samsung_SSD_750 size: 120.0GB
           ID-4: /dev/sdb model: Samsung_SSD_850 size: 256.1GB
           ID-5: /dev/sdd model: Samsung_SSD_850 size: 256.1GB
Partition: ID-1: / size: 39G used: 8.8G (25%) fs: ext4 dev: /dev/nvme0n1p1
           ID-2: /home size: 156G used: 13G (9%) fs: ext4 dev: /dev/nvme0n1p2
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 77.0C mobo: 27.8C gpu: 0.0:47C
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 375 Uptime: 17 min Memory: 4065.7/32095.4MB Init: systemd runlevel: 5 Gcc sys: 7.3.0
           Client: Shell (bash 4.4.191) inxi: 2.3.56 
The mad scientist in me is doing cartwheels.
"There is, ultimately, only one truth -- cogito, ergo sum -- everything else is an assumption." - Me, my swansong.

ajgringo619
Level 7
Level 7
Posts: 1681
Joined: Thu Mar 01, 2018 8:36 pm
Location: San Diego, California, USA

Re: The "Eat My Specs" thread - Post your specs

Post by ajgringo619 »

Noticed you have Samsung SSDs. Did you have any troubles with them? I had to take mine back; threw too many errors, froze randomly. Found a couple of threads regarding Gigabyte boards/AMD chipsets that the drive didn't like.

Code: Select all

$ inxi -Fxz
System:    Host: dss-mint19-xfce Kernel: 4.15.0-46-generic x86_64 bits: 64 compiler: gcc v: 7.3.0 Desktop: Xfce 4.12.3 
           Distro: Linux Mint 19.1 Tessa base: Ubuntu 18.04 bionic 
Machine:   Type: Desktop System: Gigabyte product: N/A v: N/A serial: <filter> 
           Mobo: Gigabyte model: 990FXA-UD3 serial: <filter> UEFI: American Megatrends v: F3 date: 05/28/2015 
CPU:       Topology: 8-Core model: AMD FX-8350 bits: 64 type: MCP arch: Bulldozer L2 cache: 2048 KiB 
           flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 64294 
           Speed: 2751 MHz min/max: 1400/4000 MHz Core speeds (MHz): 1: 1405 2: 1406 3: 1402 4: 1400 5: 1766 6: 1450 7: 1413 
           8: 1414 
Graphics:  Device-1: Advanced Micro Devices [AMD/ATI] Hawaii PRO [Radeon R9 290/390] vendor: PC Partner Limited driver: radeon 
           v: kernel bus ID: 01:00.0 
           Display: x11 server: X.Org 1.19.6 driver: ati,radeon unloaded: fbdev,modesetting,vesa resolution: 1920x1080~60Hz 
           OpenGL: renderer: AMD HAWAII (DRM 2.50.0 4.15.0-46-generic LLVM 7.0.0) v: 4.5 Mesa 18.2.2 direct render: Yes 
Audio:     Device-1: Advanced Micro Devices [AMD/ATI] SBx00 Azalia vendor: Gigabyte driver: snd_hda_intel v: kernel 
           bus ID: 00:14.2 
           Device-2: Advanced Micro Devices [AMD/ATI] Hawaii HDMI Audio [Radeon R9 290/290X / 390/390X] 
           vendor: PC Partner Limited driver: snd_hda_intel v: kernel bus ID: 01:00.1 
           Sound Server: ALSA v: k4.15.0-46-generic 
Network:   Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Gigabyte driver: r8169 v: 2.3LK-NAPI 
           port: b000 bus ID: 05:00.0 
           IF: enp5s0 state: down mac: <filter> 
           Device-2: Realtek type: USB driver: rtl88x2bu bus ID: 8-1.3:3 
           IF: wlxbcec23100000 state: up mac: <filter> 
           IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
           IF-ID-2: vboxnet0 state: down mac: <filter> 
Drives:    Local Storage: total: 3.25 TiB used: 832.97 GiB (25.0%) 
           ID-1: /dev/sda vendor: SanDisk model: SDSSDH3512G size: 476.94 GiB 
           ID-2: /dev/sdb vendor: Seagate model: ST2000DM001-1ER164 size: 1.82 TiB 
           ID-3: /dev/sdc type: USB vendor: Western Digital model: WD My Passport 25E1 size: 931.48 GiB 
           ID-4: /dev/sdd type: USB vendor: SanDisk model: Ultra size: 57.28 GiB 
Partition: ID-1: / size: 46.68 GiB used: 8.25 GiB (17.7%) fs: ext4 dev: /dev/sda5 
           ID-2: /home size: 258.85 GiB used: 84.91 GiB (32.8%) fs: ext4 dev: /dev/sda7 
           ID-3: swap-1 size: 15.26 GiB used: 24 KiB (0.0%) fs: swap dev: /dev/sda6 
Sensors:   System Temperatures: cpu: 20.6 C mobo: N/A gpu: radeon temp: 53 C 
           Fan Speeds (RPM): N/A 
Info:      Processes: 322 Uptime: 3d 7h 38m Memory: 15.62 GiB used: 4.56 GiB (29.2%) Init: systemd runlevel: 5 Compilers: 
           gcc: 7.3.0 Shell: bash v: 4.4.19 inxi: 3.0.32
Mint 19.3 XFCE
kernel 5.4.0-40-generic
AMD FX-8350 Eight-Core w/16 GB RAM
AMD Radeon R9 290/390 w/4GB RAM
Image

User avatar
catweazel
Level 19
Level 19
Posts: 9890
Joined: Fri Oct 12, 2012 9:44 pm
Location: Australian Antarctic Territory

Re: The "Eat My Specs" thread - Post your specs

Post by catweazel »

ajgringo619 wrote:
Wed Mar 13, 2019 2:15 am
Noticed you have Samsung SSDs. Did you have any troubles with them?
Only once. I only use Samsung and the only time I had an issue was a few months back when I pulled the label off an NVMe that says, in part, "Warranty void if removed", so that I could get better heat conduction to the heatsink I'd installed. The drive was only a year old, possibly a bit less but failed within two weeks of pulling the label off - lol

Serves me right, I would say.
"There is, ultimately, only one truth -- cogito, ergo sum -- everything else is an assumption." - Me, my swansong.

User avatar
lsemmens
Level 10
Level 10
Posts: 3399
Joined: Wed Sep 10, 2014 9:07 pm
Location: Rural South Australia

Re: The "Eat My Specs" thread - Post your specs

Post by lsemmens »

If you are attempting to make us envious, it might work. - The below spec is only my laptop, The rest of my machines are not as well specced. :(

Code: Select all

leigh@leigh-HP-ProBook-470-G2:~$ inxi -Fxz
System:    Host: leigh-HP-ProBook-470-G2 Kernel: 4.15.0-46-generic x86_64
           bits: 64 gcc: 7.3.0
           Desktop: Cinnamon 3.8.9 (Gtk 3.22.30-1ubuntu2)
           Distro: Linux Mint 19 Tara
Machine:   Device: laptop System: Hewlett-Packard product: HP ProBook 470 G2 v: A3009DD10303 serial: N/A
           Mobo: Hewlett-Packard model: 2249 v: KBC Version 67.24 serial: N/A
           BIOS: Hewlett-Packard v: M74 Ver. 01.09 date: 01/26/2015
Battery    BAT0: charge: 37.8 Wh 82.8% condition: 45.6/45.6 Wh (100%)
           model: Hewlett-Packard Primary status: Charging
CPU:       Dual core Intel Core i5-4210U (-MT-MCP-) 
           arch: Haswell rev.1 cache: 3072 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 9577
           clock speeds: max: 2700 MHz 1: 1234 MHz 2: 1806 MHz 3: 1773 MHz
           4: 1610 MHz
Graphics:  Card-1: Intel Haswell-ULT Integrated Graphics Controller
           bus-ID: 00:02.0
           Card-2: Advanced Micro Devices [AMD/ATI] Topaz PRO [Radeon R5 M255]
           bus-ID: 0a:00.0
           Display Server: x11 (X.Org 1.19.6 )
           drivers: modesetting,ati,amdgpu (unloaded: fbdev,vesa)
           Resolution: 1600x900@60.00hz
           OpenGL: renderer: Mesa DRI Intel Haswell Mobile
           version: 4.5 Mesa 18.2.2 Direct Render: Yes
Audio:     Card-1 Intel 8 Series HD Audio Controller
           driver: snd_hda_intel bus-ID: 00:1b.0
           Card-2 Intel Haswell-ULT HD Audio Controller
           driver: snd_hda_intel bus-ID: 00:03.0
           Sound: Advanced Linux Sound Architecture v: k4.15.0-46-generic
Network:   Card-1: Realtek RTL8111/8168/8411 PCIE Gigabit Ethernet Controller
           driver: r8169 v: 2.3LK-NAPI port: 4000 bus-ID: 08:00.0
           IF: enp8s0 state: down mac: <filter>
           Card-2: Broadcom and subsidiaries BCM43228 802.11a/b/g/n
           driver: wl bus-ID: 09:00.0
           IF: wlo1 state: up mac: <filter>
Drives:    HDD Total Size: 128.0GB (80.5% used)
           ID-1: /dev/sda model: Samsung_SSD_850 size: 128.0GB
Partition: ID-1: / size: 108G used: 89G (88%) fs: ext4 dev: /dev/sda3
           ID-2: swap-1 size: 8.04GB used: 0.00GB (0%)
           fs: swap dev: /dev/sda1
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 50.0C mobo: 0.0C gpu: 52.0
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 234 Uptime: 10:46 Memory: 3853.7/7376.9MB
           Init: systemd runlevel: 5 Gcc sys: 7.3.0
           Client: Shell (bash 4.4.191) inxi: 2.3.56 
Fully mint Household
Out of my mind - please leave a message

User avatar
catweazel
Level 19
Level 19
Posts: 9890
Joined: Fri Oct 12, 2012 9:44 pm
Location: Australian Antarctic Territory

Re: The "Eat My Specs" thread - Post your specs

Post by catweazel »

lsemmens wrote:
Wed Mar 13, 2019 6:23 am
If you are attempting to make us envious, it might work. -
<WEIL> (Wide-eyed innocent look)

Actually, no. I've wanted to create a lasting thread for a while and all previous attempts have failed so I thought, hey...!
lsemmens wrote:The below spec is only my laptop, The rest of my machines are not as well specced. :(
There's nothing wrong with a lower-spec'd machine as long as it does what you need. i5 Haswells are not rubbish :)
"There is, ultimately, only one truth -- cogito, ergo sum -- everything else is an assumption." - Me, my swansong.

rene
Level 16
Level 16
Posts: 6220
Joined: Sun Mar 27, 2016 6:58 pm

Re: The "Eat My Specs" thread - Post your specs

Post by rene »

catweazel wrote:
Wed Mar 13, 2019 6:32 am
There's nothing wrong with a lower-spec'd machine as long as it does what you need.
In fact I'd say he'd beat you silly in the "Eat My Non-waste of Computing- And Monetary Resources" thread. An i9-9900K with 32G and RTX 2080 to run a Linux desktop OS?

But what I wanted to remark on; your inxi report shows all cores at 5G so perhaps it was in fact generated while it was actually pretty loaded but if not I'd look at cooling; 77.0C is significant for an i9-9900K doing nothing much special.

User avatar
catweazel
Level 19
Level 19
Posts: 9890
Joined: Fri Oct 12, 2012 9:44 pm
Location: Australian Antarctic Territory

Re: The "Eat My Specs" thread - Post your specs

Post by catweazel »

rene wrote:
Wed Mar 13, 2019 11:15 am
catweazel wrote:
Wed Mar 13, 2019 6:32 am
There's nothing wrong with a lower-spec'd machine as long as it does what you need.
In fact I'd say he'd beat you silly in the "Eat My Non-waste of Computing- And Monetary Resources" thread. An i9-9900K with 32G and RTX 2080 to run a Linux desktop OS?
And the problem with that is what exactly? You have absolutely no idea what I do with my machines or why. That you can't fathom a reason for such equipment does not entail that there isn't one.
But what I wanted to remark on; your inxi report shows all cores at 5G so perhaps it was in fact generated while it was actually pretty loaded but if not I'd look at cooling; 77.0C is significant for an i9-9900K doing nothing much special. but if not I'd look at cooling; 77.0C is significant for an i9-9900K doing nothing much special.
The i9 is well known for generating heat under full load, and the included image clearly indicates that it was fully loaded on 16 threads for up to four minutes. As it is, the inxi readout is incorrect. The current idle temperature is 29C but inxi reports 50C. And finally, even if the CPU core was 77C, it would still be well within Intel's published tolerance for that model, and the CPU would intelligently throttle itself down when either TjMax, TDP or IccMax approached 10% of their respective maximums.
Applications are expected to run closer to TDP more often as the processor will attempt to maximize performance by taking advantage of estimated available energy budget in the processor package.

... the processor will immediately reduce its power consumption using modulation of the internal processor IA core clock, independent of the processor temperature. ... Thermal throttling using this method will modulate each processor IA core's clock independently.
- 8th and 9th Generation Intel® Core™ Processor Families and Intel® Xeon®E Processor Family Datasheet, Volume 1 of 2.
Last edited by catweazel on Wed Mar 13, 2019 5:15 pm, edited 1 time in total.
"There is, ultimately, only one truth -- cogito, ergo sum -- everything else is an assumption." - Me, my swansong.

User avatar
Tomgin5
Level 5
Level 5
Posts: 996
Joined: Sat Mar 19, 2016 2:37 pm
Location: Beaverton, Oregon USA

Re: The "Eat My Specs" thread - Post your specs

Post by Tomgin5 »

OK I will post This one and my smallest one. :D

Code: Select all

luke@luke-305E4A-305E7A ~ $ inxi -Fxzd
System:    Host: luke-305E4A-305E7A Kernel: 4.15.0-46-generic x86_64 (64 bit gcc: 5.4.0)
           Desktop: Cinnamon 3.6.7 (Gtk 3.18.9-1ubuntu3.3)
           Distro: Linux Mint 18.3 Sylvia
Machine:   Mobo: SAMSUNG model: 305E4A/305E4A v: 01QU
           Bios: American Megatrends v: 01QU.RI14.20110926.SKK date: 09/26/2011
CPU:       Quad core AMD A6-3400M APU with Radeon HD Graphics (-MCP-) cache: 4096 KB
           flags: (lm nx sse sse2 sse3 sse4a svm) bmips: 11180
           clock speeds: max: 1400 MHz 1: 802 MHz 2: 801 MHz 3: 803 MHz
           4: 858 MHz
Graphics:  Card: Advanced Micro Devices [AMD/ATI] BeaverCreek [Radeon HD 6520G]
           bus-ID: 00:01.0
           Display Server: X.Org 1.18.4 drivers: ati,radeon (unloaded: fbdev,vesa)
           Resolution: 1366x768@60.07hz
           GLX Renderer: AMD SUMO (DRM 2.50.0 / 4.15.0-46-generic, LLVM 6.0.0)
           GLX Version: 3.0 Mesa 18.0.5 Direct Rendering: Yes
Audio:     Card-1 Advanced Micro Devices [AMD] FCH Azalia Controller
           driver: snd_hda_intel bus-ID: 00:14.2
           Card-2 Advanced Micro Devices [AMD/ATI] BeaverCreek HDMI Audio [Radeon HD 6500D and 6400G-6600G series]
           driver: snd_hda_intel bus-ID: 00:01.1
           Sound: Advanced Linux Sound Architecture v: k4.15.0-46-generic
Network:   Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169 v: 2.3LK-NAPI port: e000 bus-ID: 02:00.0
           IF: enp2s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
           Card-2: Qualcomm Atheros AR9485 Wireless Network Adapter
           driver: ath9k bus-ID: 04:00.0
           IF: wlp4s0 state: up mac: <filter>
Drives:    HDD Total Size: 160.0GB (45.0% used)
           ID-1: /dev/sda model: Hitachi_HTS54251 size: 160.0GB
           Optical: /dev/sr0 model: TSST CDDVDW SN-208AB
           rev: SC00 dev-links: cdrom,cdrw,dvd,dvdrw
           Features: speed: 24x multisession: yes
           audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: / size: 143G used: 64G (47%) fs: ext4 dev: /dev/dm-0
           ID-2: /boot size: 472M used: 219M (49%) fs: ext2 dev: /dev/sda1
           ID-3: swap-1 size: 3.73GB used: 0.00GB (0%) fs: swap dev: /dev/dm-1
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 51.0C mobo: N/A gpu: 53.0
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 207 Uptime: 22:34 Memory: 1425.3/7453.3MB
           Init: systemd runlevel: 5 Gcc sys: 5.4.0
           Client: Shell (bash 4.3.481) inxi: 2.2.35 
luke@luke-305E4A-305E7A ~ $ 
In a few minutes my smallest one.

Code: Select all

tomk9@tomk9-Inspiron-910 ~ $ inxi -Fxzd
System:    Host: tomk9-Inspiron-910 Kernel: 4.15.0-45-generic i686
           bits: 32 gcc: 7.3.0
           Desktop: N/A Distro: Peppermint Nine
Machine:   Device: portable System: Dell product: Inspiron 910 v: A04 serial: N/A
           Mobo: Dell model: CN0J14 v: A04 serial: N/A
           BIOS: Dell v: A04 date: 12/29/2008
Battery    BAT1: charge: 35.5 Wh 100.0% condition: 35.5/35.5 Wh (100%)
           model: DELL status: N/A
CPU:       Single core Intel Atom N270 (-MT-) arch: Bonnell rev.2 cache: 512 KB
           flags: (nx pae sse sse2 sse3 ssse3) bmips: 3192
           clock speeds: max: 1600 MHz 1: 1158 MHz 2: 1265 MHz
Graphics:  Card: Intel Mobile 945GSE Express Integrated Graphics Controller
           bus-ID: 00:02.0
           Display Server: x11 (X.Org 1.19.6 )
           drivers: intel (unloaded: modesetting,fbdev,vesa)
           Resolution: 1024x600@60.03hz
           OpenGL: renderer: Mesa DRI Intel 945GME x86/MMX/SSE2
           version: 1.4 Mesa 18.2.2 Direct Render: Yes
Audio:     Card Intel NM10/ICH7 Family High Def. Audio Controller
           driver: snd_hda_intel bus-ID: 00:1b.0
           Sound: Advanced Linux Sound Architecture v: k4.15.0-45-generic
Network:   Card-1: Broadcom and subsidiaries BCM4312 802.11b/g LP-PHY
           driver: b43-pci-bridge bus-ID: 03:00.0
           IF: wlan0 state: up mac: <filter>
           Card-2: Realtek RTL810xE PCIE Fast Ethernet controller
           driver: r8169 v: 2.3LK-NAPI port: 2000 bus-ID: 04:00.0
           IF: enp4s0 state: down mac: <filter>
Drives:    HDD Total Size: 11.6GB (66.9% used)
           ID-1: /dev/sda model: STEC_PATA_8GB size: 7.7GB
           ID-2: USB /dev/sdb model: Patriot_Memory size: 3.9GB
           Optical: No optical drives detected.
Partition: ID-1: / size: 6.1G used: 5.2G (91%) fs: ext4 dev: /dev/dm-0
           ID-2: swap-1 size: 1.03GB used: 0.00GB (0%) fs: swap dev: /dev/dm-1
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 49.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 164 Uptime: 8 min Memory: 443.7/2002.7MB
           Init: systemd runlevel: 5 Gcc sys: 7.3.0
           Client: Shell (bash 4.4.191) inxi: 2.3.56 
tomk9@tomk9-Inspiron-910 ~ $ 
:mrgreen:
Last edited by Tomgin5 on Wed Mar 13, 2019 5:29 pm, edited 1 time in total.

User avatar
catweazel
Level 19
Level 19
Posts: 9890
Joined: Fri Oct 12, 2012 9:44 pm
Location: Australian Antarctic Territory

Re: The "Eat My Specs" thread - Post your specs

Post by catweazel »

Tomgin5 wrote:
Wed Mar 13, 2019 5:15 pm

Code: Select all

Graphics:  Card: Advanced Micro Devices [AMD/ATI] BeaverCreek [Radeon HD 6520G]
How do you find the Radeon's performance?
"There is, ultimately, only one truth -- cogito, ergo sum -- everything else is an assumption." - Me, my swansong.

User avatar
Tomgin5
Level 5
Level 5
Posts: 996
Joined: Sat Mar 19, 2016 2:37 pm
Location: Beaverton, Oregon USA

Re: The "Eat My Specs" thread - Post your specs

Post by Tomgin5 »

It seems to be pretty good. Nothing to complain about so far. I don't do gaming ETC.. Just writing a lot. Also resurrecting a lot of scraptops. :mrgreen:

Toshiba U205 LM 18 Cinnamon 64/WinXP Pro 32 bit,
Toshiba L305 LM 18.3 Cinnamon 64, Dell Opto 990 LM 18.3 innamon 64, Dell Vostro 1000 LM 18.3 Cinnamon 64. Samsung NP 305E5A LM 18.3 64 Cinnamon, Asus Eee 1001PX XFCE 19.1 64 2GB W 220 GB SSD,
Asus X402U 330 GB SSD 19.1 Cinnamon64,
MSI U200 1 GB Ram-128GB SSD XFCE 19.1 32 bit,
(2) Dell Mini9-910 W/16GB SSD 2 GB RAM XFCE 19.1 32 bit. (8) Dell Mini9-910 W/8GB SSD 2 GB RAM XFCE 19.1 32 bit.,
Dell inspirion N5010 4GB RAM 330GB SSD LM 19.1 Cinnamon 64.


Also, I have not had any problem with the Samsung SSD's.

mediclaser
Level 4
Level 4
Posts: 389
Joined: Tue Mar 20, 2018 2:28 pm

Re: The "Eat My Specs" thread - Post your specs

Post by mediclaser »

Don't get envious now. :wink:

Code: Select all

Machine:   System: Hewlett-Packard product: Presario V6000 (EY801AV#ABA) v: Rev 1
           Mobo: Quanta model: 30BB v: 66.36
           Bios: Hewlett-Packard v: F.13 date: 01/02/2007
CPU:       Single core Intel T1350 (-UP-) cache: 2048 KB
           flags: (nx pae sse sse2 sse3) bmips: 3725 speed: 1867 MHz (max)
Graphics:  Card: Intel Mobile 945GM/GMS 943/940GML Express Integrated Graphics Controller
           bus-ID: 00:02.0
           Display Server: X.Org 1.17.1 drivers: intel (unloaded: fbdev,vesa)
           Resolution: 1280x800@60.0hz
           GLX Renderer: Mesa DRI Intel 945GM x86/MMX/SSE2
           GLX Version: 1.4 Mesa 10.5.9 Direct Rendering: Yes
Audio:     Card Intel NM10/ICH7 Family High Definition Audio Controller
           driver: snd_hda_intel bus-ID: 00:1b.0
           Sound: Advanced Linux Sound Architecture v: k3.19.0-32-generic
Network:   Card-1: Intel PRO/Wireless 3945ABG [Golan] Network Connection
           driver: iwl3945 v: in-tree:s bus-ID: 02:00.0
           IF: wlan0 state: up mac: <filter>
           Card-2: Intel PRO/100 VE Network Connection
           driver: e100 v: 3.5.24-k2-NAPI port: 4000 bus-ID: 05:08.0
           IF: eth0 state: down mac: <filter>
Drives:    HDD Total Size: 500.1GB (1.7% used)
           ID-1: /dev/sda model: ST500LM012_HN size: 500.1GB
Partition: ID-1: / size: 458G used: 6.8G (2%) fs: ext4 dev: /dev/sda1
           ID-2: swap-1 size: 1.06GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
If you're looking for a greener Linux pasture, you won't find any that is greener than Linux Mint. ;)

rene
Level 16
Level 16
Posts: 6220
Joined: Sun Mar 27, 2016 6:58 pm

Re: The "Eat My Specs" thread - Post your specs

Post by rene »

catweazel wrote:
Wed Mar 13, 2019 5:12 pm
That you can't fathom a reason for such equipment does not entail that there isn't one.
Certainly not. It only entails that chances of there not being a good one are high enough to hint at it in a non too serious "Eat My Specs" thread.

Yes, other than that, I tend to at best glance at pictures; now see it was in fact loaded. I had recently been looking at that CPU and had noticed it to run (slightly) cooler than an e.g. i7-8700K. Just caught my eye that is. 29C at idle is perfect.

User avatar
catweazel
Level 19
Level 19
Posts: 9890
Joined: Fri Oct 12, 2012 9:44 pm
Location: Australian Antarctic Territory

Re: The "Eat My Specs" thread - Post your specs

Post by catweazel »

rene wrote:
Wed Mar 13, 2019 6:29 pm
catweazel wrote:
Wed Mar 13, 2019 5:12 pm
That you can't fathom a reason for such equipment does not entail that there isn't one.
Certainly not. It only entails that chances of there not being a good one are high enough to hint at it in a non too serious "Eat My Specs" thread.
lol - ok. I did say above in reply to @lsemmens why I started the thread.
Yes, other than that, I tend to at best glance at pictures;
That's quite ok. I'm no less guilty of doing the same thing, and all too often.
now see it was in fact loaded. I had recently been looking at that CPU and had noticed it to run (slightly) cooler than an e.g. i7-8700K. Just caught my eye that is. 29C at idle is perfect.
I'm not happy with the liquid cooler I have in the machine at the moment. It's a CoolerMaster RGB something or other. I bought it because the CoolerMaster Pro in my other rig is excellent but all I could find from my regular suppliers were RGB AIO coolers, and no plain old coolers without pretty lights in sight, no Pro models, nothing. So I was disappointed with this RGB AIO because the the heatsink is very thin compared to the Pro, and the radiator is very light in comparison. It seems that they've clobbered the quality to make price headroom for the RGB prettiness so I'm on the lookout for a replacement.
"There is, ultimately, only one truth -- cogito, ergo sum -- everything else is an assumption." - Me, my swansong.

User avatar
AndyMH
Level 11
Level 11
Posts: 3983
Joined: Fri Mar 04, 2016 5:23 pm
Location: Wiltshire

Re: The "Eat My Specs" thread - Post your specs

Post by AndyMH »

Not playing! The best I've got is an i5-8400 coupled with a GTX1080. :(
Homebrew i5-8400+GTX1080 Cinnamon 19.0, 3 x Thinkpad T430 Cinnamon 19.0, i7-3632 , i5-3320, i5-3210, Thinkpad T60 19.0 Mate

rene
Level 16
Level 16
Posts: 6220
Joined: Sun Mar 27, 2016 6:58 pm

Re: The "Eat My Specs" thread - Post your specs

Post by rene »

catweazel wrote:
Wed Mar 13, 2019 7:01 pm
I'm not happy with the liquid cooler I have in the machine at the moment. It's a CoolerMaster RGB something or other.
When I was looking I was also keenly ogling the Corsair H115i Pro for it. Starting to become a bit of a Corsair fan, also for cases and PSUs. Don't know how the Coolermaster would compare but Corsair is cranking out solid gear..

User avatar
catweazel
Level 19
Level 19
Posts: 9890
Joined: Fri Oct 12, 2012 9:44 pm
Location: Australian Antarctic Territory

Re: The "Eat My Specs" thread - Post your specs

Post by catweazel »

rene wrote:
Wed Mar 13, 2019 7:09 pm
catweazel wrote:
Wed Mar 13, 2019 7:01 pm
I'm not happy with the liquid cooler I have in the machine at the moment. It's a CoolerMaster RGB something or other.
When I was looking I was also keenly ogling the Corsair H115i Pro for it. Starting to become a bit of a Corsair fan, also for cases and PSUs. Don't know how the Coolermaster would compare but Corsair is cranking out solid gear..
Yes, that was my impression too but given the track record I'd had with CM I was unwilling to switch at the time. I had to send back a NZXT Kraken because it died less than two weeks after installing it, hence my reluctance to risk yet another switch. I'll bite the bullet and give the H115i PRO a chance in a few weeks :)
"There is, ultimately, only one truth -- cogito, ergo sum -- everything else is an assumption." - Me, my swansong.

rene
Level 16
Level 16
Posts: 6220
Joined: Sun Mar 27, 2016 6:58 pm

Re: The "Eat My Specs" thread - Post your specs

Post by rene »

Thing for me is that for a personal system not even the type of games I (can) enjoy, e.g. https://www.youtube.com/watch?v=RClJ_DAotaA, decisively warrant upgrade yet, so for now it's the game of virtually assembling PCs at webshops and throwing it all away again once done. Booooring.

User avatar
BenTrabetere
Level 6
Level 6
Posts: 1191
Joined: Sat Jul 19, 2014 12:04 am
Location: Hattiesburg, MS USA

Re: The "Eat My Specs" thread - Post your specs

Post by BenTrabetere »

This has been my main machine for over a decade. In its day it was a step and a half behind bleeding edge. It is under-powered and temperamental. Worst of all, it still runs and it still meets my needs, which makes it hard to justify replacing it. Please try to curb your envy.

Code: Select all

$ pinxi -Fxz
System:    Host: TheBeast Kernel: 4.15.0-43-generic x86_64 bits: 64 compiler:	gcc v: 5.4.0 Desktop: MATE 1.18.2 
           Distro: Linux Mint 18.3 Sylvia base: Ubuntu 16.04 LTS Xenial 
Machine:   Type: Desktop System: powerspec4.1k product: ps9200 v: 1.0 serial: <filter> 
           Mobo: MICRO-STAR model: MS-7185 v: 1.0 serial: <filter> BIOS: Phoenix v: 6.00 PG date: 07/05/2005 
Battery:   Device-1: hidpp_battery_0 model: Logitech M310 charge: Normal status: Discharging 
           Device-2: hidpp_battery_1 model: Logitech K520 charge: High status: Discharging 
CPU:       Topology: Dual Core model: AMD Athlon 64 X2 4200+ bits: 64 type: MCP arch: K8 rev: 1 
           L2 cache: 1024 KiB 
           flags: lm nx pae sse sse2 sse3 bogomips: 4020 
           Speed: 1000 MHz min/max: 1000/2200 MHz Core speeds (MHz): 1: 1000 2: 1000 
Graphics:  Card-1: Advanced Micro Devices [AMD/ATI] Cedar [Radeon HD 5000/6000/7350/8350 Series] driver: radeon 
           v: kernel bus ID: 05:00.0 
           Display: x11 server: X.Org 1.18.4 driver: ati,radeon unloaded: fbdev,modesetting,vesa 
           resolution: 1680x1050~60Hz 
           OpenGL: renderer: AMD CEDAR (DRM 2.50.0 / 4.15.0-43-generic LLVM 6.0.0) v: 3.3 Mesa 18.0.5 
           direct render: Yes 
Audio:     Card-1: NVIDIA CK804 AC97 Audio driver: snd_intel8x0 v: kernel bus ID: 00:04.0 
           Card-2: Advanced Micro Devices [AMD/ATI] Cedar HDMI Audio [Radeon HD 5400/6300/7300 Series] 
           driver: snd_hda_intel v: kernel bus ID: 05:00.1 
           Sound Server: ALSA v: k4.15.0-43-generic 
Network:   Card-1: NVIDIA CK804 Ethernet driver: forcedeth v: kernel port: f000 bus ID: 00:0a.0 
           IF: enp0s10 state: up speed: 1000 Mbps duplex: full mac: <filter> 
Drives:    HDD Total Size: 2.73 TiB used: 815.08 GiB (29.2%) 
           ID-1: /dev/sda vendor: Western Digital model: WD10EZEX-00BN5A0 size: 931.51 GiB 
           ID-2: /dev/sdb vendor: Western Digital model: WD10EZEX-00BN5A0 size: 931.51 GiB 
           ID-3: /dev/sdc type: USB vendor: Western Digital model: WD My Passport 0820 size: 931.48 GiB 
Partition: ID-1: / size: 220.96 GiB used: 157.56 GiB (71.3%) fs: ext4 dev: /dev/sda1 
           ID-2: swap-1 size: 7.45 GiB used: 1007.2 MiB (13.2%) fs: swap dev: /dev/sdb5 
Sensors:   System Temperatures: cpu: 21.8 C mobo: N/A gpu: radeon temp: 58 C 
           Fan Speeds (RPM): N/A 
Info:      Processes: 233 Uptime: 5d 14h 31m Memory: 3.85 GiB used: 2.07 GiB (53.7%) Init: systemd runlevel: 5 
           Compilers: gcc: 5.4.0 Shell: bash v: 4.3.48 pinxi: 3.0.14-2 

User avatar
catweazel
Level 19
Level 19
Posts: 9890
Joined: Fri Oct 12, 2012 9:44 pm
Location: Australian Antarctic Territory

Re: The "Eat My Specs" thread - Post your specs

Post by catweazel »

rene wrote:
Wed Mar 13, 2019 7:40 pm
Thing for me is that for a personal system not even the type of games I (can) enjoy, e.g. https://www.youtube.com/watch?v=RClJ_DAotaA, decisively warrant upgrade yet, so for now it's the game of virtually assembling PCs at webshops and throwing it all away again once done. Booooring.
I'm way too old for those games :)

BTW, I just hammered my CPU with a Windwoes update applied to an 8-CPU VM as a real-world test. The cores throttled up and ran the whole ten minutes at 5000MHZ. The package temperature hovered around the 44C mark and never peaked above 56C.

Cheers.
"There is, ultimately, only one truth -- cogito, ergo sum -- everything else is an assumption." - Me, my swansong.

tinca
Level 5
Level 5
Posts: 561
Joined: Sun Jan 11, 2009 9:23 am
Location: England U.K.

Re: The "Eat My Specs" thread - Post your specs

Post by tinca »

here is my one,

Code: Select all

kmw@corsair:~$ inxi -Fxz
System:    Host: corsair Kernel: 4.15.0-46-generic x86_64 bits: 64 gcc: 7.3.0
           Desktop: MATE 1.20.1 (Gtk 3.22.30-1ubuntu2)
           Distro: Linux Mint 19 Tara
Machine:   Device: desktop Mobo: Gigabyte model: Z97X-UD5H-BK v: x.x serial: N/A
           BIOS: American Megatrends v: F7 date: 04/21/2015
CPU:       Quad core Intel Core i7-4790K (-MT-MCP-) 
           arch: Haswell rev.3 cache: 8192 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 31928
           clock speeds: max: 4400 MHz 1: 4390 MHz 2: 4390 MHz 3: 4389 MHz
           4: 4390 MHz 5: 4393 MHz 6: 4402 MHz 7: 4390 MHz 8: 4392 MHz
Graphics:  Card: NVIDIA GP104 [GeForce GTX 1070] bus-ID: 01:00.0
           Display Server: x11 (X.Org 1.19.6 ) driver: nvidia
           Resolution: 1280x720@59.94hz
           OpenGL: renderer: GeForce GTX 1070/PCIe/SSE2
           version: 4.6.0 NVIDIA 390.116 Direct Render: Yes
Audio:     Card-1 Intel 9 Series Family HD Audio Controller
           driver: snd_hda_intel bus-ID: 00:1b.0
           Card-2 NVIDIA GP104 High Def. Audio Controller
           driver: snd_hda_intel bus-ID: 01:00.1
           Sound: Advanced Linux Sound Architecture v: k4.15.0-46-generic
Network:   Card-1: Intel Ethernet Connection I217-V
           driver: e1000e v: 3.2.6-k port: f040 bus-ID: 00:19.0
           IF: eno1 state: up speed: 100 Mbps duplex: full mac: <filter>
           Card-2: Qualcomm Atheros Killer E220x Gigabit Ethernet Controller
           driver: alx port: d000 bus-ID: 03:00.0
           IF: enp3s0 state: down mac: <filter>
Drives:    HDD Total Size: 6251.3GB (3.7% used)
           ID-1: /dev/sda model: Samsung_SSD_860 size: 250.1GB
           ID-2: /dev/sdb model: TOSHIBA_DT01ACA1 size: 1000.2GB
           ID-3: /dev/sdc model: ST2000DM001 size: 2000.4GB
           ID-4: /dev/sdd model: ST2000DM001 size: 2000.4GB
           ID-5: /dev/sde model: TOSHIBA_DT01ACA1 size: 1000.2GB
Partition: ID-1: / size: 199G used: 20G (11%) fs: ext4 dev: /dev/sda5
           ID-2: /home size: 1.8T used: 153G (9%) fs: ext4 dev: /dev/sdd1
           ID-3: swap-1 size: 32.00GB used: 0.00GB (0%)
           fs: swap dev: /dev/sda1
           ID-4: swap-2 size: 20.00GB used: 0.00GB (0%)
           fs: swap dev: /dev/sdc1
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 29.8C mobo: 27.8C gpu: 0.0:60C
           Fan Speeds (in rpm): cpu: 2064 fan-1: 0 fan-3: 1259 fan-4: 1151 fan-5: 1205
Info:      Processes: 242 Uptime: 5 days Memory: 2042.2/15920.7MB
           Init: systemd runlevel: 5 Gcc sys: 7.3.0
           Client: Shell (bash 4.4.191) inxi: 2.3.56 
kmw@corsair:~$ ^C
it is fitted with a Corsair H100i Pro.

Best regards Keith

Post Reply

Return to “Open chat”