How to Verify Color Quality (# of colors)

Screen resolution, 3D Acceleration, nVidia, ATI
Forum rules
Before you post please read this
Post Reply
pohutukawa
Level 1
Level 1
Posts: 9
Joined: Fri Feb 23, 2007 2:20 pm

How to Verify Color Quality (# of colors)

Post by pohutukawa » Fri Feb 23, 2007 11:28 pm

Less than 24 hours ago, I successfully set up LinuxMint for the first time.

I installed LinuxMint from an ISO image that I had downloaded just yesterday.

My graphics card is an NVIDIA Geforce 7500. Its maximum number of colors (color quality) in Windows XP is 32 bit. The other setting is 16 bit.

Question: In LinuxMint, where and how can I verify the equivalent color quality setting? I have no idea what the setting is other than screen resolution.

Thank you.

User avatar
|_NiGhTmArE_|
Level 1
Level 1
Posts: 48
Joined: Mon Feb 05, 2007 6:16 pm
Location: Italy

Post by |_NiGhTmArE_| » Sat Feb 24, 2007 5:43 am

check your xorg.conf and search the label Default Depth... it should be 24 ;)

pohutukawa
Level 1
Level 1
Posts: 9
Joined: Fri Feb 23, 2007 2:20 pm

Post by pohutukawa » Sat Feb 24, 2007 6:52 pm

Thanks, from the file system level and "computer", I did a search using File Browser for xorg.conf. Nothing.

(Aside, I found LinuxMint's File Browser a bit counter intuitive to use.)

Can I search using Terminal? If so, do I log in as root (sudo)? What would be the command line, please?

User avatar
|_NiGhTmArE_|
Level 1
Level 1
Posts: 48
Joined: Mon Feb 05, 2007 6:16 pm
Location: Italy

Post by |_NiGhTmArE_| » Sat Feb 24, 2007 8:05 pm

yeah, you can use the terminal to search...
there is many method to find: find, locate, slocate ecc...

to use locate/slocate you need to create a database... it's simple... just do this in a terminal:

Code: Select all

locate -u
now you can find with locate command just doing

Code: Select all

locate word-you-want-to-search
if you want more info

Code: Select all

locate --help
or

Code: Select all

man locate
said that, the file you want is in /etc/X11/xorg.conf

pohutukawa
Level 1
Level 1
Posts: 9
Joined: Fri Feb 23, 2007 2:20 pm

Post by pohutukawa » Sat Feb 24, 2007 8:46 pm

Thank you |_NiGhTmArE_|

Using the locate command in Terminal, I found an xorg.conf file in /etc/X11/

(strange that File Browser's search couldn't find it, but once I knew the path, I could navigate to it in File Browser.)

Anyway, using Gedit, there was no match for Default Depth. A search on Default provided found matches.

THe first one says, "Don't specify DefaultColorDepth unless you know what your are doing. It will override the driver's preferences which can cause the X server not to run if the host doesn't support the depth."

Hmmmm.

I can see four entries for Modes "1280x800"; each shows one depth: 8, 15, 16, or 24. It's not obvious to me which one applies. (All I want to do it verify which one is in use.)

Any ideas where I can verify (see) which color depth is in use, please? (I don't want to edit digital photos if the max depth is limited.)

User avatar
Fragadelic
Level 4
Level 4
Posts: 244
Joined: Wed Nov 15, 2006 11:05 am
Location: Canada
Contact:

Post by Fragadelic » Sun Feb 25, 2007 3:36 am

Go ahead and add:

DefaultDepth 24

to the Screen section of the /etc/X11/xorg.conf file.

User avatar
Fragadelic
Level 4
Level 4
Posts: 244
Joined: Wed Nov 15, 2006 11:05 am
Location: Canada
Contact:

Post by Fragadelic » Sun Feb 25, 2007 3:39 am

In a terminal window you can find out what it currently is by doing this:

xdpyinfo | grep "depth of root"

Post Reply

Return to “Graphics Cards & Monitors”