Before you post please read this
Linux Mint 18 Sarah MATE Edition.
Yes, correctly. As I said welcome screen, desktop, etc - all works fine. Only problem on boot - splash screen is corrupted and flickering.richyrich wrote:Is your monitor detected correctly in the Nvidia Settings program ? Is the refesh rate also set correctly ?
you can try to reset the plymouth theme choose #2 i think is the default not sure now i changed mine
sudo update-alternatives --config default.plymouth
sudo update-initramfs -u
Code: Select all
$ dkms status bbswitch, 0.8, 4.4.0-21-generic, x86_64: installed bbswitch, 0.8, 4.4.0-31-generic, x86_64: installed bbswitch, 0.8, 4.4.0-34-generic, x86_64: installed ndiswrapper, 1.59, 4.4.0-21-generic, x86_64: installed ndiswrapper, 1.59, 4.4.0-31-generic, x86_64: installed ndiswrapper, 1.59, 4.4.0-34-generic, x86_64: installed nvidia-361, 361.42, 4.4.0-34-generic, x86_64: installed virtualbox-guest, 5.0.24, 4.4.0-31-generic, x86_64: installed (original_module exists) virtualbox-guest, 5.0.24, 4.4.0-34-generic, x86_64: installed (original_module exists)
Code: Select all
$ inxi -F System: Host: ASUS-PC Kernel: 4.4.0-34-generic x86_64 (64 bit) Desktop: MATE 1.14.1 Distro: Linux Mint 18 Sarah Machine: Mobo: ASUSTeK model: M4N68T v: Rev X.0x Bios: American Megatrends v: 0902 date: 06/12/2010 CPU: Quad core AMD Phenom II X4 965 (-MCP-) cache: 2048 KB clock speeds: max: 3400 MHz 1: 2200 MHz 2: 2200 MHz 3: 800 MHz 4: 3400 MHz Graphics: Card: NVIDIA GF108 [GeForce GT 630] Display Server: X.Org 1.18.3 drivers: nvidia (unloaded: fbdev,vesa,nouveau) Resolution: email@example.com GLX Renderer: GeForce GT 630/PCIe/SSE2 GLX Version: 4.5.0 NVIDIA 361.42 Audio: Card-1 NVIDIA GF108 High Definition Audio Controller driver: snd_hda_intel Card-2 C-Media CMI8738/CMI8768 PCI Audio driver: snd_cmipci Card-3 Microdia driver: USB Audio Sound: Advanced Linux Sound Architecture v: k4.4.0-34-generic Network: Card-1: NVIDIA MCP61 Ethernet driver: forcedeth IF: enp0s7 state: down mac: 20:cf:30:aa:a1:fa Card-2: Realtek RTL-8100/8101L/8139 PCI Fast Ethernet Adapter driver: 8139too IF: enp1s7 state: unknown speed: 100 Mbps duplex: full mac: 60:e3:27:05:0f:23 Drives: HDD Total Size: 4000.8GB (48.6% used) ID-1: /dev/sda model: ST2000DM001 size: 2000.4GB ID-2: /dev/sdb model: WDC_WD2001FFSX size: 2000.4GB Partition: ID-1: / size: 40G used: 8.5G (23%) fs: ext4 dev: /dev/sda2 ID-2: /boot size: 964M used: 154M (18%) fs: ext4 dev: /dev/sda1 ID-3: /home size: 1.8T used: 1.6T (88%) fs: ext4 dev: /dev/sda4 ID-4: swap-1 size: 4.30GB used: 0.00GB (0%) fs: swap dev: /dev/sda3 RAID: No RAID devices: /proc/mdstat, md_mod kernel module present Sensors: System Temperatures: cpu: 42.0C mobo: 36.0C gpu: 47C Fan Speeds (in rpm): cpu: 1442 sys-1: 0 Info: Processes: 202 Uptime: 2:24 Memory: 2800.7/16047.4MB Client: Shell (bash) inxi: 2.2.35 aleksey@ASUS-PC ~ $
Code: Select all
$ sudo update-alternatives --config default.plymouth Only 1 alternative default.plymouth (provide /usr/share/plymouth/themes/default.plymouth): /usr/share/plymouth/themes/mint-logo/mint-logo.plymouth Nothing to setup. $ sudo update-initramfs -u update-initramfs: Generating /boot/initrd.img-4.4.0-34-generic
With noveau it boots on full resolution, so I tried so switch FullHD on to try to solve this problem. Tried this: https://sites.google.com/site/easylinuxtipsproject/12 with no luck as well.trytip wrote:in the article above it saying Replace Line: #GRUB_GFXMODE=640x480 but did you REMOVE the HASH or POUND sign? it should be Replace Line: GRUB_GFXMODE=1024x768 or whatever resolution, but not really needed to go all the way to 1920x
sudo gedit /etc/default/grub
Change the following lines to look like this:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nouveau.modeset=0 rd.driver.blacklist=nouveau video=vesa:off"
Save the file, exit gedit, then open up a terminal and run:
Reboot and see if it works. I have an Nvidia GTX-1060 GPU in my laptop. I am running the Nvidia proprietary driver. I found this fix on a Redhat forum yesterday and made some slight modifications for Ubuntu 16.04/Linux Mint. It worked on the first try!
No, does not work for me at all: grub become text mode and shows many ???????????? in UI. I'm on openSUSE now and have exactly same problem with plymouth: https://bugzilla.opensuse.org/show_bug. ... 002875#c45 - seems widely known problem.
I loved OpenSUSE when I used it years ago. Solid RPM based distro with KDE as the default! However, I have grown accustomed to the ease of use, along with the availability of software, of Debian/Ubuntu based distros.
I too have left Linux Mint, since they decided to give KDE users the middle finger and not make a KDE specific version anymore (even though the Mint team somehow found the time to create their own desktop ). I'm using KDE Neon User Edition 16.04 (waiting on 18.04 to drop). I'm extremely happy! Getting the latest and greatest from KDE Plasma on a regular basis without all of the MATE/Cinnamon specific BS cluttering up my computer. Saw your post when I was googling the issue earlier and figured I would help since I was able to fix the problem shortly afterwards.
Good luck! Hope someone is able to answer your question. I will post the original site where I got the information (was on a Red Hat/Fedora forum). Maybe that might help?
https://forums.fedoraforum.org/showthre ... l-consoles
What is wrong here:
Code: Select all
GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nouveau.modeset=0 rd.driver.blacklist=nouveau video=vesa:off" GRUB_CMDLINE_LINUX="iommu=soft" GRUB_DEFAULT=saved GRUB_SAVEDEFAULT=true # Uncomment to disable graphical terminal (grub-pc only) GRUB_TERMINAL="gfxterm" #The resolution used on graphical terminal GRUB_GFXPAYLOAD_LINUX="keep" GRUB_VIDEO_BACKEND="efi_gop" GRUB_TERMINAL_OUTPUT="gfxterm" GRUB_GFXMODE="1920x1080x32,1280x800x32,1024x768x32,800x600x32" GRUB_BACKGROUND= GRUB_THEME=/boot/grub2/themes/openSUSE/theme.txt GRUB_TIMEOUT="8"
Timeout: 1 seconds
Boot0001* Windows Boot Manager
If you are not using efi, you may need to set your GRUB_VIDEO_BACKEND to "vbe". Take a look at this:
https://www.if-not-true-then-false.com/ ... a-guide/2/
Make sure you have vbe installed and the module running.
Also, if you are using efi and "efi_gop" is not working, try "efi_uga".
We are just shooting in the dark right now...
Code: Select all
> sudo efibootmgr EFI variables are not supported on this system.