The connection of an additional monitor is not working properly. I connect through HDMI. When I connect it, I make it main, so it works. But when I make a laptop screen as an additional one, the picture moves and freeze. When I change the resolution on the monitor screen, the same. I do not know how to explain the problem more accurately, just in case I made a video. This problem is not one-time, since 5 rebooted, the same thing.
Another point, when OS loading before entering the password, the connected monitor is not active. Those, both screens are black. In the blind, I enter the password, and the connected monitor turns on after login to the system.
I thought that the distribution was incompatible with my hardware. Booted from the installation flash drive, in this case everything works correctly. The connected monitor is as main, with good resolution. A laptop as an additional.
I checked the driver update, there was only an update for the processor, apparently a patch for Specter and Meltdown. After the upgrade, nothing has changed. And since the updates came up, OS updates are installed.
Code: Select all
Linux Mint 18.3, codename "Sylvia", x64, Cinnamon desktop Linux imperio-mint 4.13.0-32-generic #35~16.04.1-Ubuntu SMP Thu Jan 25 10:13:43 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
hw-probe https://linux-hardware.org/?probe=5645f955eeimperio@imperio-mint ~ $ inxi -Fxz
System: Host: imperio-mint Kernel: 4.13.0-32-generic x86_64 (64 bit gcc: 5.4.0)
Desktop: Cinnamon 3.6.7 (Gtk 3.18.9-1ubuntu3.3)
Distro: Linux Mint 18.3 Sylvia
Machine: System: Acer product: Q1VZC v: V2.21
Mobo: Type2 - Board Vendor Name1 model: Type2 - Board Product Name1 v: Type2 - Board Version
Bios: Insyde v: V2.21 date: 11/26/2013
CPU: Dual core Intel Celeron 1007U (-MCP-) cache: 2048 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 5986
clock speeds: max: 1500 MHz 1: 1496 MHz 2: 1496 MHz
Graphics: Card: Intel 3rd Gen Core processor Graphics Controller
Display Server: X.Org 1.18.4 drivers: intel (unloaded: fbdev,vesa)
GLX Renderer: Mesa DRI Intel Ivybridge Mobile
GLX Version: 3.0 Mesa 17.2.4 Direct Rendering: Yes
Audio: Card Intel 7 Series/C210 Series Family High Definition Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0
Sound: Advanced Linux Sound Architecture v: k4.13.0-32-generic
Network: Card-1: Qualcomm Atheros AR9462 Wireless Network Adapter
driver: ath9k bus-ID: 03:00.0
IF: wlp3s0 state: up mac: <filter>
Card-2: Broadcom NetLink BCM57785 Gigabit Ethernet PCIe
driver: tg3 v: 3.137 bus-ID: 04:00.0
IF: enp4s0f0 state: down mac: <filter>
Drives: HDD Total Size: 120.0GB (14.8% used)
ID-1: /dev/sda model: INTEL_SSDSC2CW12 size: 120.0GB
Partition: ID-1: / size: 19G used: 7.9G (45%) fs: ext4 dev: /dev/sda1
ID-2: /home size: 88G used: 5.1G (7%) fs: ext4 dev: /dev/sda5
ID-3: swap-1 size: 4.10GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 47.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 202 Uptime: 1 min Memory: 839.8/5853.4MB
Init: systemd runlevel: 5 Gcc sys: 5.4.0
Client: Shell (bash 4.3.481) inxi: 2.2.35
Tell me, please, how you can fix this problem. Thank you.