Info: Linux Mint 18.2 Sonya. BenQ 27" connected to HDMI port at GTX 660, and LG M2252 to motherboard Gigabyte Z77X-D3H.
I've bought a new Display, a BenQ 27", and connect it to the HDMI on my graphic card. Because I don't have another HDMI connector into it, I connected my previous screen (LG M2252) to the HDMI port at the motherboard. I changed BIOS settings in order to get the motherboard enabled, and It seems it detect it. The point is, I can select sound to get throug the LG screen, but the only thing I'm seeing in it, are the dots of Linux Mint. I can not see it into "Display", I just see BenQ.
Code: Select all
inxi -Fxz
Code: Select all
System: Host: whatever-home Kernel: 4.13.0-36-generic x86_64 (64 bit gcc: 5.4.0)
Desktop: Cinnamon 3.4.6 (Gtk 3.18.9-1ubuntu3.3)
Distro: Linux Mint 18.2 Sonya
Machine: System: Gigabyte product: N/A
Mobo: Gigabyte model: Z77X-D3H v: x.x
Bios: American Megatrends v: FA date: 07/24/2013
CPU: Quad core Intel Core i7-3770K (-HT-MCP-) cache: 8192 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 28027
clock speeds: max: 3900 MHz 1: 3503 MHz 2: 3503 MHz 3: 3503 MHz
4: 3503 MHz 5: 3503 MHz 6: 3503 MHz 7: 3503 MHz 8: 3503 MHz
Graphics: Card-1: Intel Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller
bus-ID: 00:02.0
Card-2: NVIDIA GK106 [GeForce GTX 660] bus-ID: 01:00.0
Display Server: X.Org 1.18.4 drivers: nvidia,intel (unloaded: fbdev,vesa,nouveau)
Resolution: 1920x1080@60.00hz
GLX Renderer: GeForce GTX 660/PCIe/SSE2
GLX Version: 4.5.0 NVIDIA 384.111 Direct Rendering: Yes
Audio: Card-1 Intel 7 Series/C210 Series Family High Definition Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0
Card-2 NVIDIA GK106 HDMI Audio Controller
driver: snd_hda_intel bus-ID: 01:00.1
Card-3 Logitech HD Pro Webcam C920
driver: USB Audio usb-ID: 001-003
Sound: Advanced Linux Sound Architecture v: k4.13.0-36-generic
Network: Card: Qualcomm Atheros AR8161 Gigabit Ethernet
driver: alx port: d000 bus-ID: 06:00.0
IF: enp6s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 1000.2GB (20.8% used)
ID-1: /dev/sda model: WDC_WD1002FAEX size: 1000.2GB
Partition: ID-1: / size: 560G used: 182G (35%) fs: ext4 dev: /dev/sda5
ID-2: swap-1 size: 13.77GB used: 0.00GB (0%) fs: swap dev: /dev/sda6
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 29.8C mobo: 27.8C gpu: 0.0:35C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 265 Uptime: 40 min Memory: 2248.7/7866.6MB
Init: systemd runlevel: 5 Gcc sys: 5.4.0
Client: Shell (bash 4.3.481) inxi: 2.2.35
Code: Select all
xrandr
Code: Select all
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 16384 x 16384
DVI-I-0 disconnected (normal left inverted right x axis y axis)
DVI-I-1 disconnected (normal left inverted right x axis y axis)
HDMI-0 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 598mm x 336mm
1920x1080 60.00*+ 59.94 50.00 60.05 60.00 50.04
1680x1050 59.95
1600x900 60.00
1280x1024 75.02 60.02
1280x800 59.81
1280x720 60.00 59.94 50.00
1024x768 75.03 60.00
800x600 75.00 60.32
720x576 50.00
720x480 59.94
640x480 75.00 59.94 59.93
DP-0 disconnected (normal left inverted right x axis y axis)
DVI-D-0 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
Interesting thing is, I can make sound go to the LG:
Anyone got an idea of what could I try? On windows, it's working by the way. And the point is, it previously worked, but connected to the HDMI port, not to the motherboard. But I can see the 5 dots of Linux Mint !
Lot's of thanks !!!