I've just installed Linux Mint 18.3 on an Intel NUC6i3SYK.
Everything works fine but Display. It does not wake if I turn off monitor off and on or I change to a different display input. The only way to recover display is suspend or logoff.
I've tried several 4.10, 4.13 and 4.15 kernels with similar results.
Is there any other task I can do to diagnose this?
I add some diag information
Code: Select all
$ uname -a
Linux filemon 4.13.0-38-generic #43~16.04.1-Ubuntu SMP Wed Mar 14 17:48:43 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
Code: Select all
$ inxi -Fxz
System: Host: filemon Kernel: 4.13.0-38-generic x86_64 (64 bit gcc: 5.4.0)
Desktop: Cinnamon 3.6.7 (Gtk 3.18.9-1ubuntu3.3) Distro: Linux Mint 18.3 Sylvia
Machine: Mobo: Intel model: NUC6i3SYB v: H81132-502
Bios: Intel v: SYSKLi35.86A.0065.2018.0103.1000 date: 01/03/2018
CPU: Dual core Intel Core i3-6100U (-HT-MCP-) cache: 3072 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 9216
clock speeds: max: 2300 MHz 1: 500 MHz 2: 500 MHz 3: 500 MHz 4: 500 MHz
Graphics: Card: Intel Sky Lake Integrated Graphics bus-ID: 00:02.0
Display Server: X.Org 1.18.4 drivers: intel (unloaded: fbdev,vesa) Resolution: 2560x1440@59.95hz
GLX Renderer: Mesa DRI Intel HD Graphics 520 (Skylake GT2)
GLX Version: 3.0 Mesa 17.2.8 Direct Rendering: Yes
Audio: Card Intel Sunrise Point-LP HD Audio driver: snd_hda_intel bus-ID: 00:1f.3
Sound: Advanced Linux Sound Architecture v: k4.13.0-38-generic
Network: Card-1: Intel Ethernet Connection I219-V driver: e1000e v: 3.2.6-k bus-ID: 00:1f.6
IF: eno1 state: down mac: <filter>
Card-2: Intel Wireless 8260 driver: iwlwifi bus-ID: 01:00.0
IF: wlp1s0 state: up mac: <filter>
Drives: HDD Total Size: NA (-) ID-1: /dev/nvme0n1 model: N/A size: 120.0GB
Partition: ID-1: / size: 106G used: 13G (13%) fs: ext4 dev: /dev/dm-0
ID-2: /boot size: 472M used: 195M (44%) fs: ext2 dev: /dev/nvme0n1p1
ID-3: swap-1 size: 4.18GB used: 0.00GB (0%) fs: swap dev: /dev/dm-1
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 46.0C mobo: 29.8C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 254 Uptime: 17 min Memory: 1277.6/3835.3MB Init: systemd runlevel: 5 Gcc sys: 5.4.0
Client: Shell (bash 4.3.481) inxi: 2.2.35
Code: Select all
$ xrandr
Screen 0: minimum 8 x 8, current 2560 x 1440, maximum 32767 x 32767
DP1 disconnected (normal left inverted right x axis y axis)
DP1-1 disconnected (normal left inverted right x axis y axis)
DP1-8 connected primary 2560x1440+0+0 (normal left inverted right x axis y axis) 553mm x 311mm
2560x1440 59.95*+
2048x1152 60.00
1920x1200 59.88
1920x1080 60.00 50.00 59.94 30.00 25.00 24.00 29.97 23.98
1600x1200 60.00
1680x1050 59.95
1280x1024 75.02 60.02
1200x960 59.99
1152x864 75.00
1280x720 60.00 50.00 59.94
1024x768 75.03 60.00
800x600 75.00 60.32
720x576 50.00
720x480 60.00 59.94
640x480 75.00 60.00 59.94
720x400 70.08
HDMI1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
Code: Select all
$ tail -f /var/log/Xorg.0.log
[ 9.182] (**) Option "Device" "/dev/input/event6"
[ 9.182] (**) Option "_source" "_driver/libinput"
[ 9.182] (II) libinput: Microsoft Microsoft® 2.4GHz Transceiver v6.0: is a virtual subdevice
[ 9.182] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/0003:045E:0745.0003/input/input6/event6"
[ 9.182] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v6.0" (type: KEYBOARD, id 15)
[ 9.182] (**) Option "xkb_model" "pc105"
[ 9.182] (**) Option "xkb_layout" "es"
[ 9.182] (**) Option "xkb_variant" "winkeys"
[ 13.563] (II) intel(0): resizing framebuffer to 2560x1440
[ 13.580] (II) intel(0): switch to mode 2560x1440@60.0 on DP1-8 using pipe 0, position (0, 0), rotation normal, reflection none
[ 1291.508] (II) intel(0): Disabled output DP1-1 <-- Monitor switch off
[ 1295.496] (II) intel(0): Enabled output DP1-8 <-- Monitor switch on
[ 1295.496] (II) intel(0): Enabled output DP1-1
[ 1295.504] (II) intel(0): Enabled output DP1-8
[ 1295.504] (II) intel(0): Enabled output DP1-8
[ 1295.506] (II) intel(0): Enabled output DP1-8
[ 1295.507] (II) intel(0): Enabled output DP1-8
[ 1295.509] (II) intel(0): Enabled output DP1-8
[ 1295.509] (II) intel(0): Enabled output DP1-8
Code: Select all
$ xrandr
Screen 0: minimum 8 x 8, current 2560 x 1440, maximum 32767 x 32767
DP1 disconnected (normal left inverted right x axis y axis)
DP1-1 disconnected (normal left inverted right x axis y axis)
DP1-8 connected primary 2560x1440+0+0 (normal left inverted right x axis y axis) 553mm x 311mm
2560x1440 59.95*+
HDMI1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)