The only way to be able to re login into mint is to use the recovery mode to uninstall the nvidia drivers through terminal.
I already tried to reinstall Linux mint but no luck.
Secure boot is off
i already tried to add this lines in the modules file located in /etc/modules
Code: Select all
nvidia
nvidia-drm
nvidia-modeset
(the first time i installed Mint a month ago the drivers was working)
ps if you don't see the drivers installed in the outputs below is because i have uninstalled them to be able to login in the system.
inxi -Fx
Code: Select all
System:
Host: vraixen-mint Kernel: 5.4.0-74-generic x86_64 bits: 64 compiler: gcc
v: 9.3.0 Desktop: Cinnamon 4.8.6 Distro: Linux Mint 20.1 Ulyssa
base: Ubuntu 20.04 focal
Machine:
Type: Desktop System: Gigabyte product: Z490 VISION D v: -CF
serial: <superuser/root required>
Mobo: Gigabyte model: Z490 VISION D serial: <superuser/root required>
UEFI: American Megatrends v: F5a date: 06/22/2020
CPU:
Topology: 8-Core model: Intel Core i7-10700K bits: 64 type: MT MCP
arch: N/A L2 cache: 16.0 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
bogomips: 121596
Speed: 800 MHz min/max: 800/5100 MHz Core speeds (MHz): 1: 800 2: 800
3: 800 4: 800 5: 801 6: 800 7: 800 8: 800 9: 801 10: 800 11: 800 12: 800
13: 800 14: 802 15: 800 16: 800
Graphics:
Device-1: NVIDIA TU104 [GeForce RTX 2080 SUPER] driver: N/A
bus ID: 01:00.0
Display: x11 server: X.Org 1.20.9 driver: fbdev unloaded: modesetting,vesa
resolution: 1024x768~76Hz
OpenGL: renderer: llvmpipe (LLVM 11.0.0 256 bits) v: 4.5 Mesa 20.2.6
direct render: Yes
Audio:
Device-1: Intel Comet Lake PCH cAVS vendor: Gigabyte driver: snd_hda_intel
v: kernel bus ID: 00:1f.3
Device-2: NVIDIA TU104 HD Audio driver: snd_hda_intel v: kernel
bus ID: 01:00.1
Device-3: Samson Meteor condenser microphone type: USB
driver: hid-generic,snd-usb-audio,usbhid bus ID: 1-3:2
Sound Server: ALSA v: k5.4.0-74-generic
Network:
Device-1: Intel Wi-Fi 6 AX201 driver: iwlwifi v: kernel bus ID: 00:14.3
IF: wlo1 state: down mac: 58:96:1d:57:f2:ab
Device-2: Intel Ethernet I219-V vendor: Gigabyte driver: e1000e v: 3.2.6-k
port: efa0 bus ID: 00:1f.6
IF: eno2 state: down mac: b4:2e:99:fc:96:b4
Device-3: Intel vendor: Gigabyte driver: igc v: 0.0.1-k port: 3000
bus ID: 05:00.0
IF: enp5s0 state: up speed: 1000 Mbps duplex: full mac: b4:2e:99:fc:96:b2
Drives:
Local Storage: total: 2.06 TiB used: 7.99 GiB (0.4%)
ID-1: /dev/nvme0n1 vendor: Intel model: MEMPEK1W016GA size: 13.41 GiB
ID-2: /dev/nvme1n1 model: NVME SSD 1TB size: 953.87 GiB
ID-3: /dev/sda vendor: Seagate model: ST2000DM008-2FR102 size: 1.82 TiB
ID-4: /dev/sdb vendor: Samsung model: SSD 860 EVO M.2 250GB
size: 232.89 GiB
RAID:
Hardware-1: Intel SATA Controller [RAID mode] driver: ahci v: 3.0
bus ID: 00:17.0
Partition:
ID-1: / size: 223.79 GiB used: 7.95 GiB (3.6%) fs: ext4 dev: /dev/sdb3
ID-2: swap-1 size: 3.81 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sdb1
Sensors:
System Temperatures: cpu: 45.0 C mobo: 27.8 C
Fan Speeds (RPM): N/A
Info:
Processes: 356 Uptime: 1m Memory: 15.55 GiB used: 1.40 GiB (9.0%)
Init: systemd runlevel: 5 Compilers: gcc: 9.3.0 Shell: bash v: 5.0.17
inxi: 3.0.38
Code: Select all
CPU:
Topology: 8-Core model: Intel Core i7-10700K bits: 64 type: MT MCP
arch: N/A L2 cache: 16.0 MiB bogomips: 121596
Speed: 800 MHz min/max: 800/5100 MHz Core speeds (MHz): 1: 800 2: 800
3: 800 4: 800 5: 800 6: 800 7: 800 8: 801 9: 800 10: 800 11: 800 12: 800
13: 800 14: 800 15: 800 16: 800
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat
arch_capabilities arch_perfmon art avx avx2 bmi1 bmi2 bts clflush
clflushopt cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64
dtherm dts ept ept_ad erms est f16c flexpriority flush_l1d fma fpu
fsgsbase fxsr ht hwp hwp_act_window hwp_epp hwp_notify ibpb ibrs
ibrs_enhanced ida intel_pt invpcid invpcid_single lahf_lm lm mca mce
md_clear mmx monitor movbe mpx msr mtrr nonstop_tsc nopl nx ospke pae pat
pbe pcid pclmulqdq pdcm pdpe1gb pebs pge pku pln pni popcnt pse pse36 pts
rdrand rdseed rdtscp rep_good sdbg sep smap smep smx ss ssbd sse sse2
sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc tsc_adjust
tsc_deadline_timer vme vmx vnmi vpid x2apic xgetbv1 xsave xsavec xsaveopt
xsaves xtopology xtpr
Repos:
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
1: deb http://packages.linuxmint.com ulyssa main upstream import backport #id:linuxmint_main
2: deb http://archive.ubuntu.com/ubuntu focal main restricted universe multiverse
3: deb http://archive.ubuntu.com/ubuntu focal-updates main restricted universe multiverse
4: deb http://archive.ubuntu.com/ubuntu focal-backports main restricted universe multiverse
5: deb http://security.ubuntu.com/ubuntu/ focal-security main restricted universe multiverse
6: deb http://archive.canonical.com/ubuntu/ focal partner
Code: Select all
NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA driver. Make sure that the latest NVIDIA driver is installed and running.