I just plugged my old TV to pc (as second monitor) but there aren't any other settings in "display" "refresh rate" only 24 and 23,98 but when i used same setup with same cables in windows my tv was working well on 1920x1080@60
tried to change it with xrandr but i got only black screen (im not sure with this command what to do, so i tried to google it)
this modes have my monitor(tv):
Code: Select all
1920x1080 (0x5b) 74.250MHz +HSync +VSync *current
h: width 1920 start 2558 end 2602 total 2750 skew 0 clock 27.00KHz
v: height 1080 start 1084 end 1089 total 1125 clock 24.00Hz
1920x1080 (0x5c) 74.176MHz +HSync +VSync
h: width 1920 start 2558 end 2602 total 2750 skew 0 clock 26.97KHz
v: height 1080 start 1084 end 1089 total 1125 clock 23.98Hz
1280x720 (0x5d) 74.250MHz +HSync +VSync
h: width 1280 start 1390 end 1430 total 1650 skew 0 clock 45.00KHz
v: height 720 start 725 end 730 total 750 clock 60.00Hz
...