How to enable OpenGL 4+ on graphic card support OpenGL4.4?
my system report the supported opengl API is v 3.3 while i need it to be at least ver 4 +
my graphic card is support opengl v4.4
the label on graphic crad is :
HD - 545X-ZC HD - 545X - ZCH3 V4.1
HD 5450 650M 1GB DDR3 HDMI DVI VGA
PCI-E
MADE IN CHINA
and this is my graphic card link in techpowerup.com
https://www.techpowerup.com/gpu-specs/x ... 1-gb.b1730
and this is my system report
Code: Select all
System:
Kernel: 5.4.0-96-generic x86_64 bits: 64 compiler: gcc v: 9.3.0
Desktop: Cinnamon 4.6.7 Distro: Linux Mint 20 Ulyana
base: Ubuntu 20.04 focal
Machine:
Type: Desktop System: Dell product: OptiPlex 755 v: N/A serial: <filter>
Mobo: Dell model: 0GM819 serial: <filter> BIOS: Dell v: A01
date: 08/10/2007
Memory:
RAM: total: 3.71 GiB used: 2.06 GiB (55.5%)
Array-1: capacity: 8 GiB slots: 4 EC: None max module size: 2 GiB
note: est.
Device-1: DIMM_1 size: 2 GiB speed: 800 MT/s type: DDR2
Device-2: DIMM_3 size: No Module Installed
Device-3: DIMM_2 size: 2 GiB speed: 800 MT/s type: DDR2
Device-4: DIMM_4 size: No Module Installed
CPU:
Topology: Dual Core model: Intel Core2 Duo E6550 bits: 64 type: MCP
arch: Core Merom rev: B L2 cache: 4096 KiB
flags: lm nx pae sse sse2 sse3 ssse3 vmx bogomips: 9310
Speed: 1995 MHz min/max: N/A Core speeds (MHz): 1: 1995 2: 1995
Graphics:
Device-1: AMD Cedar [Radeon HD 5000/6000/7350/8350 Series]
vendor: XFX Pine driver: radeon v: kernel bus ID: 01:00.0
Display: server: X.Org 1.20.13 driver: ati,radeon
unloaded: fbdev,modesetting,vesa resolution: 1440x900~60Hz
OpenGL: renderer: AMD CEDAR (DRM 2.50.0 / 5.4.0-96-generic LLVM 12.0.0)
v: 3.3 Mesa 21.0.3 direct render: Yes
Audio:
Device-1: Intel 82801I HD Audio vendor: Dell Optiplex 755
driver: snd_hda_intel v: kernel bus ID: 00:1b.0
Device-2: AMD Cedar HDMI Audio [Radeon HD 5400/6300/7300 Series]
vendor: XFX Pine driver: snd_hda_intel v: kernel bus ID: 01:00.1
Sound Server: ALSA v: k5.4.0-96-generic
Network:
Device-1: Intel 82566DM-2 Gigabit Network vendor: Dell OptiPlex 755
driver: e1000e v: 3.2.6-k port: ecc0 bus ID: 00:19.0
IF: enp0s25 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: VIA VT6105/VT6106S [Rhine-III]
vendor: D-Link System DFE-520TX Fast PCI driver: via-rhine v: N/A
port: cc00 bus ID: 03:02.0
IF: enp3s2 state: down mac: <filter>
Drives:
Local Storage: total: 465.76 GiB used: 346.20 GiB (74.3%)
ID-1: /dev/sda vendor: Western Digital model: WD5000AAKX-00ERMA0
size: 465.76 GiB temp: 27 C
Partition:
ID-1: / size: 91.16 GiB used: 33.86 GiB (37.1%) fs: ext4 dev: /dev/sda1
ID-2: /home size: 114.09 GiB used: 93.17 GiB (81.7%) fs: ext4
dev: /dev/sda6
Sensors:
System Temperatures: cpu: 26.0 C mobo: N/A gpu: radeon temp: 41 C
Fan Speeds (RPM): N/A
Info:
Processes: 228 Uptime: 29m Init: systemd runlevel: 5 Compilers: gcc: 9.3.0
clang: 10.0.0-4ubuntu1 Shell: bash v: 5.0.17 inxi: 3.0.38