[SOLVED] Bought my new monitor question

Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Locked
User avatar
f23948
Level 4
Level 4
Posts: 253
Joined: Sun Apr 24, 2022 3:53 pm

[SOLVED] Bought my new monitor question

Post by f23948 »

I bought and just got my new monitor, please i would like to know is that monitor good for Linux Mint?
My monitor model is KA242Y and it has 75 Hz

I am using Intel graphics and VGA cable and Linux Mint Cinnamon edition 21
Last edited by LockBot on Thu May 25, 2023 10:00 pm, edited 2 times in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
User avatar
JerryF
Level 16
Level 16
Posts: 6571
Joined: Mon Jun 08, 2015 1:23 pm
Location: Rhode Island, USA

Re: Bought my new monitor question

Post by JerryF »

Any time you post a question for help, please include the system information about your computer this way:

Please open the System Reports app and click the System Information tab on the left. Your computer's information should come up in the right pane. Click the Copy button and then paste the results into a reply window here so we can see how Linux Mint views your hardware.

Have you tried connecting the monitor to the computer yet? That will be the best way to find out. Mint is pretty good at handling different monitors if you have the correct graphics driver which should load automatically when Mint is booted.

The System Information will tell us if your graphics driver is loaded properly.
User avatar
f23948
Level 4
Level 4
Posts: 253
Joined: Sun Apr 24, 2022 3:53 pm

Re: Bought my new monitor question

Post by f23948 »

JerryF wrote: Fri Nov 25, 2022 7:11 pm Any time you post a question for help, please include the system information about your computer this way:

Please open the System Reports app and click the System Information tab on the left. Your computer's information should come up in the right pane. Click the Copy button and then paste the results into a reply window here so we can see how Linux Mint views your hardware.

Have you tried connecting the monitor to the computer yet? That will be the best way to find out. Mint is pretty good at handling different monitors if you have the correct graphics driver which should load automatically when Mint is booted.

The System Information will tell us if your graphics driver is loaded properly.

Code: Select all

System:
  Kernel: 5.15.0-53-generic x86_64 bits: 64 compiler: gcc v: 11.2.0 Desktop: Cinnamon 5.4.12
    tk: GTK 3.24.33 wm: Mutter dm: LightDM Distro: Linux Mint 21 Vanessa base: Ubuntu 22.04 jammy
Machine:
  Type: Laptop System: Dell product: OptiPlex 9020M v: 00 serial: <superuser required> Chassis:
    type: 16 serial: <superuser required>
  Mobo: Dell model: 0Y5DDC v: A00 serial: <superuser required> UEFI: Dell v: A19
    date: 05/30/2019
CPU:
  Info: dual core model: Intel Core i5-4570T bits: 64 type: MCP smt: disabled arch: Haswell rev: 3
    cache: L1: 128 KiB L2: 512 KiB L3: 4 MiB
  Speed (MHz): avg: 3349 high: 3405 min/max: 800/3600 cores: 1: 3293 2: 3405 bogomips: 11574
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
  Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics vendor: Dell
    driver: i915 v: kernel ports: active: VGA-1 empty: DP-1,HDMI-A-1 bus-ID: 00:02.0
    chip-ID: 8086:0412
  Display: x11 server: X.Org v: 1.21.1.3 driver: X: loaded: modesetting unloaded: fbdev,vesa
    gpu: i915 display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96
  Monitor-1: VGA-1 model: Acer KA242Y A res: 1920x1080 dpi: 93 diag: 611mm (24")
  OpenGL: renderer: Mesa Intel HD Graphics 4600 (HSW GT2) v: 4.6 Mesa 22.0.5 compat-v: 3.1
    direct render: Yes
Audio:
  Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio vendor: Dell
    driver: snd_hda_intel v: kernel bus-ID: 00:03.0 chip-ID: 8086:0c0c
  Device-2: Intel 8 Series/C220 Series High Definition Audio vendor: Dell driver: snd_hda_intel
    v: kernel bus-ID: 00:1b.0 chip-ID: 8086:8c20
  Sound Server-1: ALSA v: k5.15.0-53-generic running: yes
  Sound Server-2: PulseAudio v: 15.99.1 running: yes
  Sound Server-3: PipeWire v: 0.3.48 running: yes
Network:
  Device-1: Intel Ethernet I217-LM vendor: Dell driver: e1000e v: kernel port: f080
    bus-ID: 00:19.0 chip-ID: 8086:153a
  IF: eno1 state: down mac: <filter>
  Device-2: Intel Wireless 7260 driver: iwlwifi v: kernel pcie: speed: 2.5 GT/s lanes: 1
    bus-ID: 02:00.0 chip-ID: 8086:08b1
  IF: wlp2s0 state: up mac: <filter>
Bluetooth:
  Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8 bus-ID: 3-8:2
    chip-ID: 8087:07dc
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 2.1 lmp-v: 4.0
    sub-v: e00
Drives:
  Local Storage: total: 476.94 GiB used: 79.9 GiB (16.8%)
  ID-1: /dev/sda vendor: Micron model: 1100 SATA 512GB size: 476.94 GiB speed: 6.0 Gb/s
    serial: <filter>
Partition:
  ID-1: / size: 467.89 GiB used: 79.89 GiB (17.1%) fs: ext4 dev: /dev/sda2
  ID-2: /boot/efi size: 511 MiB used: 5.2 MiB (1.0%) fs: vfat dev: /dev/sda1
Swap:
  ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
USB:
  Hub-1: 1-0:1 info: Full speed or root hub ports: 2 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002
  Hub-2: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0 speed: 480 Mb/s
    chip-ID: 8087:8008
  Hub-3: 2-0:1 info: Full speed or root hub ports: 3 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002
  Hub-4: 2-1:2 info: Intel Integrated Rate Matching Hub ports: 8 rev: 2.0 speed: 480 Mb/s
    chip-ID: 8087:8000
  Hub-5: 3-0:1 info: Hi-speed hub with single TT ports: 15 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002
  Device-1: 3-8:2 info: Intel Bluetooth wireless interface type: Bluetooth driver: btusb
    rev: 2.0 speed: 12 Mb/s chip-ID: 8087:07dc
  Device-2: 3-9:3 info: Logitech Unifying Receiver type: Keyboard,Mouse
    driver: logitech-djreceiver,usbhid rev: 2.0 speed: 12 Mb/s chip-ID: 046d:c534
  Device-3: 3-10:4 info: Dell KB212-B Quiet Key Keyboard type: Keyboard
    driver: hid-generic,usbhid rev: 2.0 speed: 1.5 Mb/s chip-ID: 413c:2107
  Hub-6: 4-0:1 info: Super-speed hub ports: 6 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
Sensors:
  System Temperatures: cpu: 63.0 C mobo: 27.8 C
  Fan Speeds (RPM): N/A
Repos:
  Packages: apt: 2397
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/1password.list
    1: deb [arch=amd64 signed-by=/usr/share/keyrings/1password-archive-keyring.gpg] https: //downloads.1password.com/linux/debian/amd64 stable main
  Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
    1: deb [arch=amd64] https: //dl.google.com/linux/chrome/deb/ stable main
  Active apt repos in: /etc/apt/sources.list.d/mozilla-team.list
    1: deb [signed-by=/usr/share/keyrings/mozillateam.gpg] https: //ppa.launchpadcontent.net/mozillateam/ppa/ubuntu jammy main
  Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
    1: deb http: //packages.linuxmint.com vanessa main upstream import backport
    2: deb http: //archive.ubuntu.com/ubuntu jammy main restricted universe multiverse
    3: deb http: //archive.ubuntu.com/ubuntu jammy-updates main restricted universe multiverse
    4: deb http: //archive.ubuntu.com/ubuntu jammy-backports main restricted universe multiverse
    5: deb http: //security.ubuntu.com/ubuntu/ jammy-security main restricted universe multiverse
Info:
  Processes: 222 Uptime: 2h 4m Memory: 15.53 GiB used: 2.2 GiB (14.1%) Init: systemd v: 249
  runlevel: 5 Compilers: gcc: 11.3.0 alt: 11 Client: Unknown python3.10 client inxi: 3.3.13
User avatar
JerryF
Level 16
Level 16
Posts: 6571
Joined: Mon Jun 08, 2015 1:23 pm
Location: Rhode Island, USA

Re: Bought my new monitor question

Post by JerryF »

Looks like your graphics driver is fine. I notice that you have the monitor connected. Is it working ok?
User avatar
f23948
Level 4
Level 4
Posts: 253
Joined: Sun Apr 24, 2022 3:53 pm

Re: Bought my new monitor question

Post by f23948 »

JerryF wrote: Fri Nov 25, 2022 7:34 pm Looks like your graphics driver is fine. I notice that you have the monitor connected. Is it working ok?
It's working good. My monitor is connected.
Locked

Return to “Graphics Cards & Monitors”