xrandr --verbose output is not the ASUS ROG EDID, but it is the initial one you posted in your 3rd post. You must have added the wrong edid.bin file to /lib/firmware/edid.Sapphire 7900 xtx UHD rez at 100hz almost there
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Re: Sapphire reference 7900 xtx UHD rez..but still limited to 60hz
The EDID from the
Re: Sapphire reference 7900 xtx UHD rez..but still limited to 60hz
You may have correctly replaced the edid.bin file in /ib/firmware/edid but then did not update the initial ramdisk:
sudo update-initramfs -u-
stefana92
Re: Sapphire reference 7900 xtx UHD rez..but still limited to 60hz
Hi,
I saw you had a similar cursor issue, I also have an RDNA 3 card though missing an x
I tried your solution ctrl+alt+backspace, I tried to then use both the cinnamon and the software rendered.
I've tried multiple cursor themes
We don't seem to have Wayland option on LM
Nor can I find the file mentioned here: https://github.com/CatWithCode/catwithc ... 1364848537
I was wondering if you could share anymore details of what you did, have done or tried to resolve please?
Thanks
I saw you had a similar cursor issue, I also have an RDNA 3 card though missing an x
I tried your solution ctrl+alt+backspace, I tried to then use both the cinnamon and the software rendered.
I've tried multiple cursor themes
We don't seem to have Wayland option on LM
Nor can I find the file mentioned here: https://github.com/CatWithCode/catwithc ... 1364848537
I was wondering if you could share anymore details of what you did, have done or tried to resolve please?
Thanks
Re: Sapphire reference 7900 xtx UHD rez..but still limited to 60hz
That file does not exist, but you can create one. I'll post the info in your topic.stefana92 wrote: ⤴Wed Jan 11, 2023 3:46 pm Hi,
I saw you had a similar cursor issue, I also have an RDNA 3 card though missing an x
I tried your solution ctrl+alt+backspace, I tried to then use both the cinnamon and the software rendered.
I've tried multiple cursor themes
We don't seem to have Wayland option on LM
Nor can I find the file mentioned here: https://github.com/CatWithCode/catwithc ... 1364848537
A woman typing on a laptop with LM20.3 Cinnamon.
Re: Sapphire reference 7900 xtx UHD rez..but still limited to 60hz
I had to create and put a manual file into etc/x11/xorg.conf.d folder calledstefana92 wrote: ⤴Wed Jan 11, 2023 3:46 pm Hi,
I saw you had a similar cursor issue, I also have an RDNA 3 card though missing an x
I tried your solution ctrl+alt+backspace, I tried to then use both the cinnamon and the software rendered.
I've tried multiple cursor themes
We don't seem to have Wayland option on LM
Nor can I find the file mentioned here: https://github.com/CatWithCode/catwithc ... 1364848537
I was wondering if you could share anymore details of what you did, have done or tried to resolve please?
Thanks
no-modesetting.conf with the following contents inside it belowSection "Device"
Identifier "AMD Graphics"
Driver "modesetting"
Option "SWcursor" "True"
EndSectionIf you are ever running an nvidia or intel gpu, replace " AMD Graphics" with "Intel" or "Nvidia" ( I think..I apologize I don't recall the exact url I found those instructions from..possibly a reditt forum . I'll look further later.
This is all the time I can spend on this for now inside this particular topic. Not trying to piss off the forum mods in the context of incoherence since this topic is not about " no cursor visible" problems ( nods slowly
)Mint 21.2 Cinnamon 5.8.4
asrock x570 taichi ...bios p5.00
ryzen 5900x
128GB Kingston Fury @ 3600mhz
Corsair mp600 pro xt NVME ssd 4TB
three 4TB ssds
dual 1TB ssds
Two 16TB Toshiba hdd's
24GB amd 7900xtx vid card
Viewsonic Elite UHD 32" 144hz monitor
asrock x570 taichi ...bios p5.00
ryzen 5900x
128GB Kingston Fury @ 3600mhz
Corsair mp600 pro xt NVME ssd 4TB
three 4TB ssds
dual 1TB ssds
Two 16TB Toshiba hdd's
24GB amd 7900xtx vid card
Viewsonic Elite UHD 32" 144hz monitor
Re: Sapphire reference 7900 xtx UHD rez..but still limited to 60hz
Intel is the only one of those three which normally uses the modesetting driver.motoryzen wrote: ⤴Wed Jan 11, 2023 7:01 pmI had to create and put a manual file into etc/x11/xorg.conf.d folder calledno-modesetting.confwith the following contents inside it below
Section "Device"
Identifier "AMD Graphics"
Driver "modesetting"
Option "SWcursor" "True"
EndSection
If you are ever running an nvidia or intel gpu, replace " AMD Graphics" with "Intel" or "Nvidia" ( I think..I apologize I don't recall the exact url I found those instructions from..possibly a reditt forum .
I did not catch this in your earlier inxi outputs that is showed the modesetting driver.
Graphics:
Device-1: AMD driver: amdgpu v: kernel pcie: speed: 16 GT/s lanes: 16
ports: active: HDMI-A-1 empty: DP-1,DP-2,DP-3 bus-ID: 0e:00.0
chip-ID: 1002:744c
Display: x11 server: X.Org v: 1.21.1.3 driver: X: loaded: modesetting
gpu: amdgpu display-ID: :0 screens: 1
That should be amdgpu and your file might be the reason it is not. If you look at the link provided by stefana92, you'll see the driver in the file is amdgpu.
Maybe using the amdgpu driver will help the Hz issue. I suggest you edit that file.
A woman typing on a laptop with LM20.3 Cinnamon.
Re: Sapphire reference 7900 xtx UHD rez..but still limited to 60hz
1. Ok. so the 7900xtx is back in
2. Did the firmware update instructions SMG gave
3. Did the instructions roblm mentioned about custom edid.bin file ( tried both asus pq one..AND the ROG one)
results = rog one maxes out aa 60hz not even 80hz
Asus pq one = will show option of 98 hz but only will let stick 80 hz at UHD
And yes..I ran both commands below after precisely following roblm's instructions on that custom ROG edid file deal with the conversion from .txt to .bin
Here's an updated inxi as of two seconds ago
That resolved the " driver: X: Loaded: modesetting" issue , SMG involving your instructions to edit the 20-modsetting file I have in etc/x11/xorg.conf.d folder file called " 20-modesetting.conf content of that file below
2. Did the firmware update instructions SMG gave
3. Did the instructions roblm mentioned about custom edid.bin file ( tried both asus pq one..AND the ROG one)
results = rog one maxes out aa 60hz not even 80hz
Asus pq one = will show option of 98 hz but only will let stick 80 hz at UHD
And yes..I ran both commands below after precisely following roblm's instructions on that custom ROG edid file deal with the conversion from .txt to .bin
Here's an updated inxi as of two seconds ago
Code: Select all
nemo 5.6.1
System:
Kernel: 6.0.9-060009-generic x86_64 bits: 64 compiler: N/A
Desktop: Cinnamon 5.6.5 tk: GTK 3.24.33 wm: muffin dm: LightDM
Distro: Linux Mint 21.1 Vera base: Ubuntu 22.04 jammy
Machine:
Type: Desktop Mobo: ASRock model: X570 Taichi serial: <superuser required>
BIOS: American Megatrends v: P4.60 date: 08/03/2021
Memory:
RAM: total: 125.72 GiB used: 3.43 GiB (2.7%)
RAM Report:
permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: 12-core model: AMD Ryzen 9 5900X bits: 64 type: MT MCP arch: Zen 3
rev: 0 cache: L1: 768 KiB L2: 6 MiB L3: 64 MiB
Speed (MHz): avg: 2444 high: 3700 min/max: 2200/4950 boost: enabled
cores: 1: 2200 2: 2200 3: 2200 4: 2200 5: 2200 6: 2200 7: 2200 8: 2200
9: 2200 10: 2200 11: 3700 12: 3594 13: 2200 14: 2200 15: 2200 16: 2194
17: 2198 18: 2192 19: 3700 20: 2200 21: 2200 22: 3700 23: 2200 24: 2200
bogomips: 177595
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Graphics:
Device-1: AMD driver: amdgpu v: kernel pcie: speed: 16 GT/s lanes: 16
ports: active: DP-3 empty: DP-1,DP-2,HDMI-A-1 bus-ID: 0e:00.0
chip-ID: 1002:744c
Display: x11 server: X.Org v: 1.21.1.3 driver: X: loaded: amdgpu
gpu: amdgpu display-ID: :0 screens: 1
Screen-1: 0 s-res: 3840x2160 s-dpi: 96
Monitor-1: DisplayPort-2 mapped: DP-3 model: ViewSonic XG320U
res: 3840x2160 dpi: 138 diag: 812mm (32")
OpenGL:
renderer: GFX1100 (gfx1100 LLVM 15.0.6 DRM 3.48 6.0.9-060009-generic)
v: 4.6 Mesa 22.3.2 - kisak-mesa PPA direct render: Yes
Audio:
Device-1: AMD driver: snd_hda_intel v: kernel pcie: speed: 16 GT/s
lanes: 16 bus-ID: 0e:00.1 chip-ID: 1002:ab30
Device-2: AMD Starship/Matisse HD Audio vendor: ASRock
driver: snd_hda_intel v: kernel pcie: speed: 16 GT/s lanes: 16
bus-ID: 10:00.4 chip-ID: 1022:1487
Sound Server-1: ALSA v: k6.0.9-060009-generic running: yes
Sound Server-2: PulseAudio v: 15.99.1 running: yes
Sound Server-3: PipeWire v: 0.3.48 running: yes
Network:
Device-1: Intel I211 Gigabit Network vendor: ASRock driver: igb v: kernel
pcie: speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 06:00.0
chip-ID: 8086:1539
IF: enp6s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 22.74 TiB used: 14.56 TiB (64.0%)
ID-1: /dev/nvme0n1 vendor: Corsair model: Corsair MP600 PRO XT
size: 3.64 TiB speed: 63.2 Gb/s lanes: 4 serial: <filter> temp: 25.9 C
ID-2: /dev/sda vendor: Samsung model: SSD 860 EVO 1TB size: 931.51 GiB
speed: 6.0 Gb/s serial: <filter>
ID-3: /dev/sdb vendor: Samsung model: SSD 860 EVO 4TB size: 3.64 TiB
speed: 6.0 Gb/s serial: <filter>
ID-4: /dev/sdc vendor: Toshiba model: HDWR31G size: 14.55 TiB
speed: 6.0 Gb/s serial: <filter>
Partition:
ID-1: / size: 97.87 GiB used: 38.17 GiB (39.0%) fs: ext4
dev: /dev/nvme0n1p2
ID-2: /boot/efi size: 510 MiB used: 30.5 MiB (6.0%) fs: vfat
dev: /dev/nvme0n1p4
ID-3: /home size: 3.48 TiB used: 1.34 TiB (38.5%) fs: ext4
dev: /dev/nvme0n1p3
ID-4: /mnt/16TB Toshiba hdd size: 14.44 TiB used: 11.62 TiB (80.5%)
fs: ext4 dev: /dev/sdc
ID-5: /mnt/GoPro 1TB Backup size: 915.82 GiB used: 31.14 GiB (3.4%)
fs: ext4 dev: /dev/sda1
ID-6: /mnt/sdb4 size: 3.44 TiB used: 1.53 TiB (44.4%) fs: ext4
dev: /dev/sdb4
Swap:
ID-1: swap-1 type: file size: 10 GiB used: 0 KiB (0.0%) priority: -2
file: /swapfile
Sensors:
System Temperatures: cpu: N/A mobo: N/A gpu: amdgpu temp: 41.0 C
mem: 64.0 C
Fan Speeds (RPM): N/A gpu: amdgpu fan: 519
Repos:
Packages: 2901 apt: 2876 flatpak: 25
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/cappelikan-ppa-jammy.list
1: deb [arch=amd64 signed-by=/etc/apt/keyrings/cappelikan-ppa-jammy.gpg] https://ppa.launchpadcontent.net/cappelikan/ppa/ubuntu jammy main
Active apt repos in: /etc/apt/sources.list.d/ernstp-mesarc-jammy.list
1: deb [arch=amd64 signed-by=/etc/apt/keyrings/ernstp-mesarc-jammy.gpg] https://ppa.launchpadcontent.net/ernstp/mesarc/ubuntu jammy main
Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main
Active apt repos in: /etc/apt/sources.list.d/kisak-kisak-mesa-jammy.list
1: deb [arch=amd64 signed-by=/etc/apt/keyrings/kisak-kisak-mesa-jammy.gpg] https://ppa.launchpadcontent.net/kisak/kisak-mesa/ubuntu jammy main
Active apt repos in: /etc/apt/sources.list.d/lunarg-vulkan-1.3.236-jammy.list
1: deb https://packages.lunarg.com/vulkan/1.3.236 jammy main
2: deb-src https://packages.lunarg.com/vulkan/1.3.236 jammy main
Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
1: deb http://packages.linuxmint.com vera main upstream import backport
2: deb http://mirror.brightridge.com/ubuntuarchive jammy main restricted universe multiverse
3: deb http://mirror.brightridge.com/ubuntuarchive jammy-updates main restricted universe multiverse
4: deb http://mirror.brightridge.com/ubuntuarchive jammy-backports main restricted universe multiverse
5: deb http://security.ubuntu.com/ubuntu/ jammy-security main restricted universe multiverse
Active apt repos in: /etc/apt/sources.list.d/openshot_developers-ppa-jammy.list
1: deb [arch=amd64 signed-by=/etc/apt/keyrings/openshot_developers-ppa-jammy.gpg] https://ppa.launchpadcontent.net/openshot.developers/ppa/ubuntu jammy main
Active apt repos in: /etc/apt/sources.list.d/pcsx2-team-pcsx2-daily-jammy.list
1: deb [arch=amd64 signed-by=/etc/apt/keyrings/pcsx2-team-pcsx2-daily-jammy.gpg] https://ppa.launchpadcontent.net/pcsx2-team/pcsx2-daily/ubuntu jammy main
Active apt repos in: /etc/apt/sources.list.d/teamviewer.list
1: deb [signed-by=/usr/share/keyrings/teamviewer-keyring.gpg] https://linux.teamviewer.com/deb stable main
Active apt repos in: /etc/apt/sources.list.d/teejee2008-ppa-jammy.list
1: deb [arch=amd64 signed-by=/etc/apt/keyrings/teejee2008-ppa-jammy.gpg] https://ppa.launchpadcontent.net/teejee2008/ppa/ubuntu jammy main
Active apt repos in: /etc/apt/sources.list.d/winehq-focal.sources
1: deb [arch=amd64 i386] https://dl.winehq.org/wine-builds/ubuntu focal main
Active apt repos in: /etc/apt/sources.list.d/winehq-jammy.sources
1: deb [arch=amd64 i386] https://dl.winehq.org/wine-builds/ubuntu jammy main
Info:
Processes: 453 Uptime: 3m Init: systemd v: 249 runlevel: 5 Compilers:
gcc: 11.3.0 alt: 11 Shell: Bash v: 5.1.16 running-in: gnome-terminal
inxi: 3.3.13
Code: Select all
Section "Device"
Identifier "AMD"
Driver "amdgpu"
Option "SWCursor" "True"
EndSectionMint 21.2 Cinnamon 5.8.4
asrock x570 taichi ...bios p5.00
ryzen 5900x
128GB Kingston Fury @ 3600mhz
Corsair mp600 pro xt NVME ssd 4TB
three 4TB ssds
dual 1TB ssds
Two 16TB Toshiba hdd's
24GB amd 7900xtx vid card
Viewsonic Elite UHD 32" 144hz monitor
asrock x570 taichi ...bios p5.00
ryzen 5900x
128GB Kingston Fury @ 3600mhz
Corsair mp600 pro xt NVME ssd 4TB
three 4TB ssds
dual 1TB ssds
Two 16TB Toshiba hdd's
24GB amd 7900xtx vid card
Viewsonic Elite UHD 32" 144hz monitor
Re: Sapphire reference 7900 xtx UHD rez..but still limited to 60hz
And here's an updated xrandr --verbose
updated inxi -Gx
Also just tried doing again the first firmware update SMG informed me off on page one of this topic, rebooted. only two 60hz options in Display settings
Then tried most upper firmware file option at which is linux-firmware-a1ad1d5b50626f2d126adf1964ce0e98cbb8b39d.tar.gz
Also tried the one at https://git.kernel.org/pub/scm/linux/ke ... it/commit/
When I mean " tried" i mean I download the file, extract it. in the folder that it shows after extraction. I go inside that folder, then right click , open in terminal, and paste the two commands that SMG mention ( one at a time of course and press enter to run them each time)
sudo cp -R * /lib/firmware/
sudo update-initramfs -u -k all
then reboot the PC and check Display Settings again
This is what I do each time I try another firmware file/folder deal.
Code: Select all
Screen 0: minimum 320 x 200, current 3840 x 2160, maximum 16384 x 16384
DisplayPort-0 disconnected (normal left inverted right x axis y axis)
Identifier: 0x52
Timestamp: 9149
Subpixel: unknown
Clones:
CRTCs: 0 1 2 3
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
GAMMA_LUT_SIZE: 4096
range: (0, -1)
DEGAMMA_LUT_SIZE: 4096
range: (0, -1)
GAMMA_LUT: 0
range: (0, 65535)
CTM: 0
DEGAMMA_LUT: 0
range: (0, 65535)
TearFree: auto
supported: off, on, auto
subconnector: Unknown
supported: Unknown, VGA, DVI-D, HDMI, DP, Wireless, Native
HDCP Content Type: HDCP Type0
supported: HDCP Type0, HDCP Type1
Content Protection: Undesired
supported: Undesired, Desired, Enabled
vrr_capable: 0
range: (0, 1)
max bpc: 8
range: (8, 16)
underscan vborder: 0
range: (0, 128)
underscan hborder: 0
range: (0, 128)
underscan: off
supported: off, on, auto
scaling mode: None
supported: None, Full, Center, Full aspect
link-status: Good
supported: Good, Bad
CONNECTOR_ID: 78
supported: 78
non-desktop: 0
range: (0, 1)
DisplayPort-1 disconnected (normal left inverted right x axis y axis)
Identifier: 0x53
Timestamp: 9149
Subpixel: unknown
Clones:
CRTCs: 0 1 2 3
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
GAMMA_LUT_SIZE: 4096
range: (0, -1)
DEGAMMA_LUT_SIZE: 4096
range: (0, -1)
GAMMA_LUT: 0
range: (0, 65535)
CTM: 0
DEGAMMA_LUT: 0
range: (0, 65535)
TearFree: auto
supported: off, on, auto
subconnector: Unknown
supported: Unknown, VGA, DVI-D, HDMI, DP, Wireless, Native
HDCP Content Type: HDCP Type0
supported: HDCP Type0, HDCP Type1
Content Protection: Undesired
supported: Undesired, Desired, Enabled
vrr_capable: 0
range: (0, 1)
max bpc: 8
range: (8, 16)
underscan vborder: 0
range: (0, 128)
underscan hborder: 0
range: (0, 128)
underscan: off
supported: off, on, auto
scaling mode: None
supported: None, Full, Center, Full aspect
link-status: Good
supported: Good, Bad
CONNECTOR_ID: 85
supported: 85
non-desktop: 0
range: (0, 1)
DisplayPort-2 connected primary 3840x2160+0+0 (0x57) normal (normal left inverted right x axis y axis) 708mm x 398mm
Identifier: 0x54
Timestamp: 9149
Subpixel: unknown
Gamma: 1.0:1.3:1.7
Brightness: 1.0
Clones:
CRTC: 0
CRTCs: 0 1 2 3
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
_MUTTER_PRESENTATION_OUTPUT: 0
EDID:
00ffffffffffff005a633b500101010f
0a200104b54728783b7565b04e2ebc26
0e5054bfef808140818081c0714f9500
a9c0b300d1c04dd000a0f0703e803020
3500c48e2100001a000000ff00574631
3232313030303238300a000000fd0030
90fafa42010a202020202020000000fc
005847333230550a2020202020200148
02032bf15a06070102030e0f15161112
1d1e130410403f052769726061757623
09070783010000e305c3018a6f80a070
3840403020280cc48e2100001a6fc200
a0a0a0555030203500c48e2100001a56
5e00a0a0a0305030203500c48e210000
1a8c640050f0701f8008201804c48e21
00001a000000000000000000000000b9
GAMMA_LUT_SIZE: 4096
range: (0, -1)
DEGAMMA_LUT_SIZE: 4096
range: (0, -1)
GAMMA_LUT: 0
range: (0, 65535)
CTM: 0 1 0 0 0 0 0 0 0 1 0 0 0 0 0 0
0 1
DEGAMMA_LUT: 0
range: (0, 65535)
TearFree: auto
supported: off, on, auto
subconnector: Native
supported: Unknown, VGA, DVI-D, HDMI, DP, Wireless, Native
HDCP Content Type: HDCP Type0
supported: HDCP Type0, HDCP Type1
Content Protection: Undesired
supported: Undesired, Desired, Enabled
vrr_capable: 0
range: (0, 1)
max bpc: 8
range: (8, 16)
underscan vborder: 0
range: (0, 128)
underscan hborder: 0
range: (0, 128)
underscan: off
supported: off, on, auto
scaling mode: None
supported: None, Full, Center, Full aspect
link-status: Good
supported: Good, Bad
CONNECTOR_ID: 89
supported: 89
non-desktop: 0
range: (0, 1)
3840x2160 (0x57) 533.250MHz +HSync -VSync *current +preferred
h: width 3840 start 3888 end 3920 total 4000 skew 0 clock 133.31KHz
v: height 2160 start 2163 end 2168 total 2222 clock 60.00Hz
3840x2160 (0x58) 594.000MHz +HSync +VSync
h: width 3840 start 4016 end 4104 total 4400 skew 0 clock 135.00KHz
v: height 2160 start 2168 end 2178 total 2250 clock 60.00Hz
3840x2160 (0x59) 594.000MHz +HSync +VSync
h: width 3840 start 4896 end 4984 total 5280 skew 0 clock 112.50KHz
v: height 2160 start 2168 end 2178 total 2250 clock 50.00Hz
3840x2160 (0x5a) 594.000MHz +HSync +VSync
h: width 3840 start 5116 end 5204 total 5500 skew 0 clock 108.00KHz
v: height 2160 start 2168 end 2178 total 2250 clock 48.00Hz
3840x2160 (0x5b) 593.407MHz +HSync +VSync
h: width 3840 start 4016 end 4104 total 4400 skew 0 clock 134.87KHz
v: height 2160 start 2168 end 2178 total 2250 clock 59.94Hz
3840x2160 (0x5c) 593.407MHz +HSync +VSync
h: width 3840 start 5116 end 5204 total 5500 skew 0 clock 107.89KHz
v: height 2160 start 2168 end 2178 total 2250 clock 47.95Hz
3840x2160 (0x5d) 297.000MHz +HSync +VSync
h: width 3840 start 4016 end 4104 total 4400 skew 0 clock 67.50KHz
v: height 2160 start 2168 end 2178 total 2250 clock 30.00Hz
3840x2160 (0x5e) 296.703MHz +HSync +VSync
h: width 3840 start 4016 end 4104 total 4400 skew 0 clock 67.43KHz
v: height 2160 start 2168 end 2178 total 2250 clock 29.97Hz
3840x2160 (0x5f) 257.400MHz +HSync -VSync
h: width 3840 start 3848 end 3880 total 3920 skew 0 clock 65.66KHz
v: height 2160 start 2177 end 2185 total 2191 clock 29.97Hz
2560x1440 (0x60) 497.750MHz +HSync -VSync
h: width 2560 start 2608 end 2640 total 2720 skew 0 clock 183.00KHz
v: height 1440 start 1443 end 1448 total 1525 clock 120.00Hz
2560x1440 (0x61) 241.500MHz +HSync -VSync
h: width 2560 start 2608 end 2640 total 2720 skew 0 clock 88.79KHz
v: height 1440 start 1443 end 1448 total 1488 clock 59.67Hz
1920x1200 (0x62) 533.250MHz +HSync -VSync
h: width 1920 start 3888 end 3920 total 4000 skew 0 clock 133.31KHz
v: height 1200 start 2163 end 2168 total 2222 clock 60.00Hz
1920x1080 (0x63) 297.000MHz +HSync +VSync
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 135.00KHz
v: height 1080 start 1084 end 1089 total 1125 clock 120.00Hz
1920x1080 (0x64) 297.000MHz +HSync +VSync
h: width 1920 start 2448 end 2492 total 2640 skew 0 clock 112.50KHz
v: height 1080 start 1084 end 1089 total 1125 clock 100.00Hz
1920x1080 (0x65) 296.703MHz +HSync +VSync
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 134.87KHz
v: height 1080 start 1084 end 1089 total 1125 clock 119.88Hz
1920x1080 (0x66) 285.540MHz +HSync -VSync
h: width 1920 start 1968 end 2000 total 2080 skew 0 clock 137.28KHz
v: height 1080 start 1130 end 1138 total 1144 clock 120.00Hz
1920x1080 (0x67) 148.500MHz -HSync -VSync
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 67.50KHz
v: height 1080 start 1084 end 1089 total 1125 clock 60.00Hz
1920x1080 (0x68) 148.500MHz +HSync +VSync
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 67.50KHz
v: height 1080 start 1084 end 1089 total 1125 clock 60.00Hz
1920x1080 (0x69) 148.352MHz +HSync +VSync
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 67.43KHz
v: height 1080 start 1084 end 1089 total 1125 clock 59.94Hz
1600x1200 (0x6a) 533.250MHz +HSync -VSync
h: width 1600 start 3888 end 3920 total 4000 skew 0 clock 133.31KHz
v: height 1200 start 2163 end 2168 total 2222 clock 60.00Hz
1680x1050 (0x6b) 146.250MHz -HSync +VSync
h: width 1680 start 1784 end 1960 total 2240 skew 0 clock 65.29KHz
v: height 1050 start 1053 end 1059 total 1089 clock 59.95Hz
1600x900 (0x6c) 108.000MHz +HSync +VSync
h: width 1600 start 1624 end 1704 total 1800 skew 0 clock 60.00KHz
v: height 900 start 901 end 904 total 1000 clock 60.00Hz
1280x1024 (0x6d) 135.000MHz +HSync +VSync
h: width 1280 start 1296 end 1440 total 1688 skew 0 clock 79.98KHz
v: height 1024 start 1025 end 1028 total 1066 clock 75.02Hz
1280x1024 (0x6e) 108.000MHz +HSync +VSync
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 63.98KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.02Hz
1440x900 (0x6f) 106.500MHz -HSync +VSync
h: width 1440 start 1520 end 1672 total 1904 skew 0 clock 55.93KHz
v: height 900 start 903 end 909 total 934 clock 59.89Hz
1280x960 (0x70) 108.000MHz +HSync +VSync
h: width 1280 start 1376 end 1488 total 1800 skew 0 clock 60.00KHz
v: height 960 start 961 end 964 total 1000 clock 60.00Hz
1280x800 (0x71) 533.250MHz +HSync -VSync
h: width 1280 start 3888 end 3920 total 4000 skew 0 clock 133.31KHz
v: height 800 start 2163 end 2168 total 2222 clock 60.00Hz
1152x864 (0x72) 108.000MHz +HSync +VSync
h: width 1152 start 1216 end 1344 total 1600 skew 0 clock 67.50KHz
v: height 864 start 865 end 868 total 900 clock 75.00Hz
1280x720 (0x73) 74.250MHz +HSync +VSync
h: width 1280 start 1390 end 1430 total 1650 skew 0 clock 45.00KHz
v: height 720 start 725 end 730 total 750 clock 60.00Hz
1280x720 (0x74) 74.250MHz +HSync +VSync
h: width 1280 start 1720 end 1760 total 1980 skew 0 clock 37.50KHz
v: height 720 start 725 end 730 total 750 clock 50.00Hz
1280x720 (0x75) 74.176MHz +HSync +VSync
h: width 1280 start 1390 end 1430 total 1650 skew 0 clock 44.96KHz
v: height 720 start 725 end 730 total 750 clock 59.94Hz
1440x576 (0x76) 54.000MHz -HSync -VSync
h: width 1440 start 1464 end 1592 total 1728 skew 0 clock 31.25KHz
v: height 576 start 581 end 586 total 625 clock 50.00Hz
1024x768 (0x77) 78.750MHz +HSync +VSync
h: width 1024 start 1040 end 1136 total 1312 skew 0 clock 60.02KHz
v: height 768 start 769 end 772 total 800 clock 75.03Hz
1024x768 (0x78) 75.000MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1328 skew 0 clock 56.48KHz
v: height 768 start 771 end 777 total 806 clock 70.07Hz
1024x768 (0x79) 65.000MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.36KHz
v: height 768 start 771 end 777 total 806 clock 60.00Hz
1440x480 (0x7a) 54.054MHz -HSync -VSync
h: width 1440 start 1472 end 1596 total 1716 skew 0 clock 31.50KHz
v: height 480 start 489 end 495 total 525 clock 60.00Hz
1440x480 (0x7b) 54.000MHz -HSync -VSync
h: width 1440 start 1472 end 1596 total 1716 skew 0 clock 31.47KHz
v: height 480 start 489 end 495 total 525 clock 59.94Hz
832x624 (0x7c) 57.284MHz -HSync -VSync
h: width 832 start 864 end 928 total 1152 skew 0 clock 49.73KHz
v: height 624 start 625 end 628 total 667 clock 74.55Hz
800x600 (0x7d) 50.000MHz +HSync +VSync
h: width 800 start 856 end 976 total 1040 skew 0 clock 48.08KHz
v: height 600 start 637 end 643 total 666 clock 72.19Hz
800x600 (0x7e) 49.500MHz +HSync +VSync
h: width 800 start 816 end 896 total 1056 skew 0 clock 46.88KHz
v: height 600 start 601 end 604 total 625 clock 75.00Hz
800x600 (0x7f) 40.000MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.88KHz
v: height 600 start 601 end 605 total 628 clock 60.32Hz
800x600 (0x80) 36.000MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.16KHz
v: height 600 start 601 end 603 total 625 clock 56.25Hz
720x576 (0x81) 27.000MHz -HSync -VSync
h: width 720 start 732 end 796 total 864 skew 0 clock 31.25KHz
v: height 576 start 581 end 586 total 625 clock 50.00Hz
720x480 (0x82) 27.027MHz -HSync -VSync
h: width 720 start 736 end 798 total 858 skew 0 clock 31.50KHz
v: height 480 start 489 end 495 total 525 clock 60.00Hz
720x480 (0x83) 27.000MHz -HSync -VSync
h: width 720 start 736 end 798 total 858 skew 0 clock 31.47KHz
v: height 480 start 489 end 495 total 525 clock 59.94Hz
640x480 (0x84) 31.500MHz -HSync -VSync
h: width 640 start 656 end 720 total 840 skew 0 clock 37.50KHz
v: height 480 start 481 end 484 total 500 clock 75.00Hz
640x480 (0x85) 31.500MHz -HSync -VSync
h: width 640 start 664 end 704 total 832 skew 0 clock 37.86KHz
v: height 480 start 489 end 492 total 520 clock 72.81Hz
640x480 (0x86) 30.240MHz -HSync -VSync
h: width 640 start 704 end 768 total 864 skew 0 clock 35.00KHz
v: height 480 start 483 end 486 total 525 clock 66.67Hz
640x480 (0x87) 25.200MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.50KHz
v: height 480 start 490 end 492 total 525 clock 60.00Hz
640x480 (0x88) 25.175MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.47KHz
v: height 480 start 490 end 492 total 525 clock 59.94Hz
720x400 (0x89) 28.320MHz -HSync +VSync
h: width 720 start 738 end 846 total 900 skew 0 clock 31.47KHz
v: height 400 start 412 end 414 total 449 clock 70.08Hz
HDMI-A-0 disconnected (normal left inverted right x axis y axis)
Identifier: 0x55
Timestamp: 9149
Subpixel: unknown
Clones:
CRTCs: 0 1 2 3
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
GAMMA_LUT_SIZE: 4096
range: (0, -1)
DEGAMMA_LUT_SIZE: 4096
range: (0, -1)
GAMMA_LUT: 0
range: (0, 65535)
CTM: 0
DEGAMMA_LUT: 0
range: (0, 65535)
TearFree: auto
supported: off, on, auto
HDCP Content Type: HDCP Type0
supported: HDCP Type0, HDCP Type1
Content Protection: Undesired
supported: Undesired, Desired, Enabled
vrr_capable: 0
range: (0, 1)
max bpc: 8
range: (8, 16)
underscan vborder: 0
range: (0, 128)
underscan hborder: 0
range: (0, 128)
underscan: off
supported: off, on, auto
scaling mode: None
supported: None, Full, Center, Full aspect
link-status: Good
supported: Good, Bad
CONNECTOR_ID: 94
supported: 94
non-desktop: 0
range: (0, 1)
Code: Select all
Graphics:
Device-1: AMD driver: amdgpu v: kernel bus-ID: 0e:00.0
Display: x11 server: X.Org v: 1.21.1.3 driver: X: loaded: amdgpu
gpu: amdgpu resolution: 3840x2160~60Hz
OpenGL:
renderer: GFX1100 (gfx1100 LLVM 15.0.6 DRM 3.48 6.0.9-060009-generic)
v: 4.6 Mesa 22.3.2 - kisak-mesa PPA direct render: Yes
Then tried most upper firmware file option at which is linux-firmware-a1ad1d5b50626f2d126adf1964ce0e98cbb8b39d.tar.gz
Also tried the one at https://git.kernel.org/pub/scm/linux/ke ... it/commit/
When I mean " tried" i mean I download the file, extract it. in the folder that it shows after extraction. I go inside that folder, then right click , open in terminal, and paste the two commands that SMG mention ( one at a time of course and press enter to run them each time)
sudo cp -R * /lib/firmware/
sudo update-initramfs -u -k all
then reboot the PC and check Display Settings again
This is what I do each time I try another firmware file/folder deal.
Mint 21.2 Cinnamon 5.8.4
asrock x570 taichi ...bios p5.00
ryzen 5900x
128GB Kingston Fury @ 3600mhz
Corsair mp600 pro xt NVME ssd 4TB
three 4TB ssds
dual 1TB ssds
Two 16TB Toshiba hdd's
24GB amd 7900xtx vid card
Viewsonic Elite UHD 32" 144hz monitor
asrock x570 taichi ...bios p5.00
ryzen 5900x
128GB Kingston Fury @ 3600mhz
Corsair mp600 pro xt NVME ssd 4TB
three 4TB ssds
dual 1TB ssds
Two 16TB Toshiba hdd's
24GB amd 7900xtx vid card
Viewsonic Elite UHD 32" 144hz monitor
Re: Sapphire reference 7900 xtx UHD rez..but still limited to 60hz
and here's an updated result of sudo get-edid
Yes..that is literal copy n paste.
Now sudo get-edid | parse-edid
Code: Select all
This is read-edid version 3.0.2. Prepare for some fun.
Attempting to use i2c interface
No EDID on bus 1
No EDID on bus 2
No EDID on bus 3
No EDID on bus 4
No EDID on bus 5
No EDID on bus 6
No EDID on bus 7
No EDID on bus 8
No EDID on bus 9
No EDID on bus 10
2 potential busses found: 0 11
Will scan through until the first EDID is found.
Pass a bus number as an option to this program to go only for that one.
Bus 0 doesn't really have an EDID...
256-byte EDID successfully retrieved from i2c bus 11
������Zc;P
�G(x;ue�N.�&PT�@����qO������M���p>�0 5Ď!��WF1221000280
�0���B
�XG320U
Looks like i2c was successful. Have a good day.
H+�Z@?'ir`auv# ����o��p8@@0 (
Now sudo get-edid | parse-edid
Code: Select all
This is read-edid version 3.0.2. Prepare for some fun.
Attempting to use i2c interface
No EDID on bus 1
No EDID on bus 2
No EDID on bus 3
No EDID on bus 4
No EDID on bus 5
No EDID on bus 6
No EDID on bus 7
No EDID on bus 8
No EDID on bus 9
No EDID on bus 10
2 potential busses found: 0 11
Will scan through until the first EDID is found.
Pass a bus number as an option to this program to go only for that one.
Bus 0 doesn't really have an EDID...
256-byte EDID successfully retrieved from i2c bus 11
Looks like i2c was successful. Have a good day.
Checksum Correct
Section "Monitor"
Identifier "XG320U"
ModelName "XG320U"
VendorName "VSC"
# Monitor Manufactured week 10 of 2022
# EDID version 1.4
# Digital Display
DisplaySize 710 400
Gamma 2.20
Option "DPMS" "true"
Horizsync 250-250
VertRefresh 48-144
# Maximum pixel clock is 660MHz
#Not giving standard mode: 1280x960, 60Hz
#Not giving standard mode: 1280x1024, 60Hz
#Not giving standard mode: 1280x720, 60Hz
#Not giving standard mode: 1152x864, 75Hz
#Not giving standard mode: 1440x900, 60Hz
#Not giving standard mode: 1600x900, 60Hz
#Not giving standard mode: 1680x1050, 60Hz
#Not giving standard mode: 1920x1080, 60Hz
#Extension block found. Parsing...
#WARNING: I may have missed a mode (CEA mode 64)
#WARNING: I may have missed a mode (CEA mode 63)
#WARNING: I may have missed a mode (CEA mode 105)
#WARNING: I may have missed a mode (CEA mode 114)
#WARNING: I may have missed a mode (CEA mode 96)
#WARNING: I may have missed a mode (CEA mode 97)
#WARNING: I may have missed a mode (CEA mode 117)
#WARNING: I may have missed a mode (CEA mode 118)
Modeline "Mode 19" 285.54 1920 1968 2000 2080 1080 1130 1138 1144 +hsync -vsync
Modeline "Mode 0" 533.25 3840 3888 3920 4000 2160 2163 2168 2222 +hsync -vsync
Modeline "Mode 1" 27.027 1440 1478 1602 1716 480 484 487 525 -hsync -vsync interlace
Modeline "Mode 2" 27.027 1440 1478 1602 1716 480 484 487 525 -hsync -vsync interlace
Modeline "Mode 3" 25.200 640 656 752 800 480 490 492 525 -hsync -vsync
Modeline "Mode 4" 27.027 720 736 798 858 480 489 495 525 -hsync -vsync
Modeline "Mode 5" 27.027 720 736 798 858 480 489 495 525 -hsync -vsync
Modeline "Mode 6" 54.054 1440 1472 1596 1716 480 489 495 525 -hsync -vsync
Modeline "Mode 7" 54.054 1440 1472 1596 1716 480 489 495 525 -hsync -vsync
Modeline "Mode 8" 27.000 1440 1464 1590 1728 576 578 581 625 -hsync -vsync interlace
Modeline "Mode 9" 27.000 1440 1464 1590 1728 576 578 581 625 -hsync -vsync interlace
Modeline "Mode 10" 27.000 720 732 796 864 576 581 586 625 -hsync -vsync
Modeline "Mode 11" 27.000 720 732 796 864 576 581 586 625 -hsync -vsync
Modeline "Mode 12" 54.000 1440 1464 1592 1728 576 581 586 625 -hsync -vsync
Modeline "Mode 13" 54.000 1440 1464 1592 1728 576 581 586 625 -hsync -vsync
Modeline "Mode 14" 74.250 1280 1720 1760 1980 720 725 730 750 +hsync +vsync
Modeline "Mode 15" 74.250 1280 1390 1420 1650 720 725 730 750 +hsync +vsync
Modeline "Mode 16" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
Modeline "Mode 17" 74.250 1920 2008 2052 2200 1080 1082 1087 1125 +hsync +vsync interlace
Modeline "Mode 18" 72.000 1920 1952 2120 2304 1080 1103 1108 1250 +hsync +vsync interlace
Modeline "Mode 20" 497.75 2560 2608 2640 2720 1440 1443 1448 1525 +hsync -vsync
Modeline "Mode 21" 241.50 2560 2608 2640 2720 1440 1443 1448 1488 +hsync -vsync
Modeline "Mode 22" 257.40 3840 3848 3880 3920 2160 2177 2185 2191 +hsync -vsync
Option "PreferredMode" "Mode 19"Mint 21.2 Cinnamon 5.8.4
asrock x570 taichi ...bios p5.00
ryzen 5900x
128GB Kingston Fury @ 3600mhz
Corsair mp600 pro xt NVME ssd 4TB
three 4TB ssds
dual 1TB ssds
Two 16TB Toshiba hdd's
24GB amd 7900xtx vid card
Viewsonic Elite UHD 32" 144hz monitor
asrock x570 taichi ...bios p5.00
ryzen 5900x
128GB Kingston Fury @ 3600mhz
Corsair mp600 pro xt NVME ssd 4TB
three 4TB ssds
dual 1TB ssds
Two 16TB Toshiba hdd's
24GB amd 7900xtx vid card
Viewsonic Elite UHD 32" 144hz monitor
Re: Sapphire reference 7900 xtx UHD rez..but still limited to 60hz
The default is to use the hardware cursor, so your change makes the software cursor be used. Why the hardware cursor would not work with this GPU? I did find mention a few months back of a change made in Mesa with regards to multi GL threading which affected KWin and some people made comments they thought it could be a factor with X Server, but I didn't find anything definitive as to why what you and stephan92 experienced would happen.motoryzen wrote: ⤴Wed Jan 11, 2023 8:16 pmThat resolved the " driver: X: Loaded: modesetting" issue , SMG involving your instructions to edit the 20-modsetting file I have in etc/x11/xorg.conf.d folder file called " 20-modesetting.conf content of that file below
Code: Select all
Section "Device" Identifier "AMD" Driver "amdgpu" Option "SWCursor" "True" EndSection
A woman typing on a laptop with LM20.3 Cinnamon.
Re: Sapphire reference 7900 xtx UHD rez..but still limited to 60hz
Well..I'll find out one way or another tomorrow when I edit that file to show
HWCursor instead
HWCursor instead
Mint 21.2 Cinnamon 5.8.4
asrock x570 taichi ...bios p5.00
ryzen 5900x
128GB Kingston Fury @ 3600mhz
Corsair mp600 pro xt NVME ssd 4TB
three 4TB ssds
dual 1TB ssds
Two 16TB Toshiba hdd's
24GB amd 7900xtx vid card
Viewsonic Elite UHD 32" 144hz monitor
asrock x570 taichi ...bios p5.00
ryzen 5900x
128GB Kingston Fury @ 3600mhz
Corsair mp600 pro xt NVME ssd 4TB
three 4TB ssds
dual 1TB ssds
Two 16TB Toshiba hdd's
24GB amd 7900xtx vid card
Viewsonic Elite UHD 32" 144hz monitor
Re: Sapphire reference 7900 xtx UHD rez..but still limited to 60hz
You previously posted the EDID from a Windows installation using an HDMI connection, but I never told you to test it in the Mint installation because it was identical to the EDID obtained from running a live session from the Mint 21.1 USB. I think you should test that EDID in the actual installation. The live session output is not always exactly the same after the actual installation. Here is the Windows EDID:
Code: Select all
00 ff ff ff ff ff ff 00 5a 63 3b 50 01 01 01 11
0a 20 01 03 80 47 28 78 3a 75 65 b0 4e 2e bc 26
0e 50 54 bf ef 80 81 40 81 80 81 c0 71 4f 95 00
a9 c0 b3 00 d1 c0 4d d0 00 a0 f0 70 3e 80 30 20
35 00 c4 8e 21 00 00 1a 00 00 00 ff 00 57 46 31
32 32 31 30 30 30 32 38 30 0a 00 00 00 fd 00 30
90 1e e6 3c 00 0a 20 20 20 20 20 20 00 00 00 fc
00 58 47 33 32 30 55 0a 20 20 20 20 20 20 02 73
02 03 61 f1 23 09 07 07 83 01 00 00 67 03 0c 00
10 00 38 3c 6d d8 5d c4 01 78 88 33 0f 30 90 c3
34 0c 6d 1a 00 00 02 0b 30 90 e6 04 73 15 75 2d
e3 05 c3 01 e4 0f 00 00 60 e3 0e 75 76 e6 06 05
01 7b 5a 1e e2 00 d5 59 06 07 01 02 03 0e 0f 15
16 11 12 1d 1e 13 04 10 3f 27 05 72 40 60 61 75
76 86 bc 00 50 a0 a0 55 50 08 20 78 00 c4 8e 21
00 00 1e 00 00 00 00 00 00 00 00 00 00 00 00 fc
70 12 79 00 00 03 01 50 47 e8 01 84 ff 0e 4f 00
07 80 1f 00 6f 08 36 00 28 00 07 00 d0 a3 01 04
ff 0e 4f 00 07 80 1f 00 6f 08 7e 00 70 00 07 00
7a 5a 01 00 ff 0e 4f 00 07 80 1f 00 6f 08 68 00
5a 00 07 00 d0 50 01 00 ff 0e 9f 00 10 00 3e 00
6f 08 27 00 14 00 07 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 be 90
Re: Sapphire reference 7900 xtx UHD rez..but still limited to 60hz
It's my understanding the hardware cursor is the default used (if that file does not exist indicating to use software cursor).
The things I learn by helping others that I would never otherwise know.
A woman typing on a laptop with LM20.3 Cinnamon.
Re: Sapphire reference 7900 xtx UHD rez..but still limited to 60hz
I'm also curious if AMD expo in my UEFI bios must be disabled to finally fix my 60hz limitation problem as far as proper performance and all with my 7900xtx given the last paragraph of that phoronix involved link you gave the other 7900xrx user in this forum...a quote from the dev
Will check..toggle setting asns report back later
Yes I realize I'm not running 7000 series vou, but ..* shrugs* may be worth a shot. I don't know pff my immediate memory if mine is enabled or if also PBO is involved either.. Launch day morning update: It looks like it may be related to the AMD EXPO mode with Zen 4... AMD is aware of some system configurations where the EXPO feature will set the BIOS SoC power out-of-spec that can lead to PCIe device issues. Forcing it to 1.25V for the SoC power via the BIOS is the workaround. With my ASUS configuration the SoC power was being set to 1.252V and some tentative tests at 1.250V for the SoC power are looking like the performance issues go away... Again, just an issue I've seen with the RX 7900 series and not other graphics cards but in any case will hopefully be better handled by a BIOS update.)
130 Comments - Next Page
Will check..toggle setting asns report back later
Mint 21.2 Cinnamon 5.8.4
asrock x570 taichi ...bios p5.00
ryzen 5900x
128GB Kingston Fury @ 3600mhz
Corsair mp600 pro xt NVME ssd 4TB
three 4TB ssds
dual 1TB ssds
Two 16TB Toshiba hdd's
24GB amd 7900xtx vid card
Viewsonic Elite UHD 32" 144hz monitor
asrock x570 taichi ...bios p5.00
ryzen 5900x
128GB Kingston Fury @ 3600mhz
Corsair mp600 pro xt NVME ssd 4TB
three 4TB ssds
dual 1TB ssds
Two 16TB Toshiba hdd's
24GB amd 7900xtx vid card
Viewsonic Elite UHD 32" 144hz monitor
-
doctor-code
- Level 1
- Posts: 1
- Joined: Thu Jan 12, 2023 1:04 pm
Re: Sapphire reference 7900 xtx UHD rez..but still limited to 60hz
Hi, I have xg320u monitor and a 7900 xtx and I was also limited to 60hz with KDE and X11, but I am able to use 144 hz on 4K by switching to KDE wayland.
Hope this also helps you.
Hope this also helps you.
Re: Sapphire reference 7900 xtx UHD rez..but still limited to 60hz
Wayland is not available for Linux Mint. Linux Mint runs on X Server only.
Perhaps AMD has been focusing their efforts on Wayland.
A woman typing on a laptop with LM20.3 Cinnamon.
Re: Sapphire reference 7900 xtx UHD rez..but still limited to 60hz
( sigh). I wouldn't mind giving KDE wayland a try, but I'm heavily at home in Mint Cinnamon...crap.doctor-code wrote: ⤴Thu Jan 12, 2023 1:08 pm Hi, I have xg320u monitor and a 7900 xtx and I was also limited to 60hz with KDE and X11, but I am able to use 144 hz on 4K by switching to KDE wayland.
Hope this also helps you.
Mint 21.2 Cinnamon 5.8.4
asrock x570 taichi ...bios p5.00
ryzen 5900x
128GB Kingston Fury @ 3600mhz
Corsair mp600 pro xt NVME ssd 4TB
three 4TB ssds
dual 1TB ssds
Two 16TB Toshiba hdd's
24GB amd 7900xtx vid card
Viewsonic Elite UHD 32" 144hz monitor
asrock x570 taichi ...bios p5.00
ryzen 5900x
128GB Kingston Fury @ 3600mhz
Corsair mp600 pro xt NVME ssd 4TB
three 4TB ssds
dual 1TB ssds
Two 16TB Toshiba hdd's
24GB amd 7900xtx vid card
Viewsonic Elite UHD 32" 144hz monitor
Re: Sapphire reference 7900 xtx UHD rez..but still limited to 60hz
Tried to install Ubuntu 22.04 vanilla into a separate ssd. Did..
sudo apt install linux-oem-22.04c -y
Kernel 6.1.something....resulted.
Still 1024x768 res with 75hz
Did the manual Asus pq 43 inch monitor edid.bin deal from earlier...got me UHD but same results...80hz and screen tearing central...uuug.
Tried to enable Wayland via instructions I found online, but the cog at the bottom right of hr login screen never showed up to let me pick a different display manager..
Uug. I really wish AMD wouldn't have advertised this as being supported in Linux given the entire pik tod this card is UHD rez at above 60hz...until the correct drivers was launched or at least put an asterisk on their official website on a detailed list of package and setup requirements..
But regardless..I'm the one that bought this sucker on launch month...
sudo apt install linux-oem-22.04c -y
Kernel 6.1.something....resulted.
Still 1024x768 res with 75hz
Did the manual Asus pq 43 inch monitor edid.bin deal from earlier...got me UHD but same results...80hz and screen tearing central...uuug.
Tried to enable Wayland via instructions I found online, but the cog at the bottom right of hr login screen never showed up to let me pick a different display manager..
Uug. I really wish AMD wouldn't have advertised this as being supported in Linux given the entire pik tod this card is UHD rez at above 60hz...until the correct drivers was launched or at least put an asterisk on their official website on a detailed list of package and setup requirements..
But regardless..I'm the one that bought this sucker on launch month...
Last edited by motoryzen on Fri Jan 13, 2023 2:34 pm, edited 1 time in total.
Mint 21.2 Cinnamon 5.8.4
asrock x570 taichi ...bios p5.00
ryzen 5900x
128GB Kingston Fury @ 3600mhz
Corsair mp600 pro xt NVME ssd 4TB
three 4TB ssds
dual 1TB ssds
Two 16TB Toshiba hdd's
24GB amd 7900xtx vid card
Viewsonic Elite UHD 32" 144hz monitor
asrock x570 taichi ...bios p5.00
ryzen 5900x
128GB Kingston Fury @ 3600mhz
Corsair mp600 pro xt NVME ssd 4TB
three 4TB ssds
dual 1TB ssds
Two 16TB Toshiba hdd's
24GB amd 7900xtx vid card
Viewsonic Elite UHD 32" 144hz monitor
Re: Sapphire reference 7900 xtx UHD rez..but still limited to 60hz
Did you add the newer firmware and use the PPA for the newer Mesa too?
A woman typing on a laptop with LM20.3 Cinnamon.
Re: Sapphire reference 7900 xtx UHD rez..but still limited to 60hz
Yes..I tried firmware only first....rebooted...multiple dp ports on the vid card and hdmi cable... I didn't see any newer mesa yesterday or day before
Now back in Mint cinnamon 21.1.... today..
Newest mesa I have seen is just today via Update manager for me ( also New Mint update....update long with cinnamon, cinnamon-desktop, etc)
is
New inxi now
About to reboot..then shut down. install the new video card again and try again.
Now back in Mint cinnamon 21.1.... today..
Newest mesa I have seen is just today via Update manager for me ( also New Mint update....update long with cinnamon, cinnamon-desktop, etc)
is
v: 4.6 Mesa 22.3.3 - kisak-mesa PPA direct render: Yes
New inxi now
Code: Select all
nemo 5.6.2
System:
Kernel: 6.1.0-1004-oem x86_64 bits: 64 compiler: N/A
Desktop: Cinnamon 5.6.6 tk: GTK 3.24.33 wm: muffin dm: LightDM
Distro: Linux Mint 21.1 Vera base: Ubuntu 22.04 jammy
Machine:
Type: Desktop Mobo: ASRock model: X570 Taichi serial: <superuser required>
BIOS: American Megatrends v: P4.60 date: 08/03/2021
Memory:
RAM: total: 125.72 GiB used: 3.78 GiB (3.0%)
RAM Report:
permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: 12-core model: AMD Ryzen 9 5900X bits: 64 type: MT MCP arch: Zen 3
rev: 0 cache: L1: 768 KiB L2: 6 MiB L3: 64 MiB
Speed (MHz): avg: 2509 high: 3700 min/max: 2200/4950 boost: enabled
cores: 1: 2200 2: 2200 3: 2200 4: 2200 5: 2200 6: 2200 7: 2200 8: 2200
9: 2800 10: 2200 11: 2200 12: 3154 13: 2200 14: 2200 15: 2200 16: 3564
17: 2200 18: 2200 19: 2200 20: 3700 21: 2200 22: 3700 23: 3700 24: 2200
bogomips: 177602
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Graphics:
Device-1: AMD Ellesmere [Radeon RX 470/480/570/570X/580/580X/590]
vendor: Sapphire Nitro+ driver: amdgpu v: kernel pcie: speed: 8 GT/s
lanes: 16 ports: active: DP-1 empty: DP-2, DVI-D-1, HDMI-A-1, HDMI-A-2
bus-ID: 0c:00.0 chip-ID: 1002:67df
Display: x11 server: X.Org v: 1.21.1.3 driver: X: loaded: modesetting
gpu: amdgpu display-ID: :0 screens: 1
Screen-1: 0 s-res: 3840x2160 s-dpi: 96
Monitor-1: DP-1 model: ASUS PG43U res: 3840x2160 dpi: 104
diag: 1080mm (42.5")
OpenGL: renderer: AMD Radeon RX 580 Series (polaris10 LLVM 15.0.6 DRM
3.49 6.1.0-1004-oem)
v: 4.6 Mesa 22.3.3 - kisak-mesa PPA direct render: Yes
Audio:
Device-1: AMD Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]
vendor: Sapphire driver: snd_hda_intel v: kernel pcie: speed: 8 GT/s
lanes: 16 bus-ID: 0c:00.1 chip-ID: 1002:aaf0
Device-2: AMD Starship/Matisse HD Audio vendor: ASRock
driver: snd_hda_intel v: kernel pcie: speed: 16 GT/s lanes: 16
bus-ID: 0e:00.4 chip-ID: 1022:1487
Sound Server-1: ALSA v: k6.1.0-1004-oem running: yes
Sound Server-2: PulseAudio v: 15.99.1 running: yes
Sound Server-3: PipeWire v: 0.3.48 running: yes
Network:
Device-1: Intel I211 Gigabit Network vendor: ASRock driver: igb v: kernel
pcie: speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 06:00.0
chip-ID: 8086:1539
IF: enp6s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 22.74 TiB used: 14.64 TiB (64.4%)
ID-1: /dev/nvme0n1 vendor: Corsair model: Corsair MP600 PRO XT
size: 3.64 TiB speed: 63.2 Gb/s lanes: 4 serial: <filter> temp: 22.9 C
ID-2: /dev/sda vendor: Samsung model: SSD 860 EVO 1TB size: 931.51 GiB
speed: 6.0 Gb/s serial: <filter>
ID-3: /dev/sdb vendor: Samsung model: SSD 860 EVO 4TB size: 3.64 TiB
speed: 6.0 Gb/s serial: <filter>
ID-4: /dev/sdc vendor: Toshiba model: HDWR31G size: 14.55 TiB
speed: 6.0 Gb/s serial: <filter>
Partition:
ID-1: / size: 97.87 GiB used: 36.5 GiB (37.3%) fs: ext4 dev: /dev/nvme0n1p2
ID-2: /boot/efi size: 510 MiB used: 30.6 MiB (6.0%) fs: vfat
dev: /dev/nvme0n1p4
ID-3: /home size: 3.48 TiB used: 1.34 TiB (38.5%) fs: ext4
dev: /dev/nvme0n1p3
ID-4: /mnt/16TB Toshiba hdd size: 14.44 TiB used: 11.62 TiB (80.5%)
fs: ext4 dev: /dev/sdc
ID-5: /mnt/GoPro 1TB Backup size: 915.82 GiB used: 31.14 GiB (3.4%)
fs: ext4 dev: /dev/sda1
ID-6: /mnt/sdb4 size: 3.44 TiB used: 1.53 TiB (44.4%) fs: ext4
dev: /dev/sdb4
ID-7: /run/timeshift/8824/backup size: 937.83 GiB used: 85.74 GiB (9.1%)
fs: ext4 dev: /dev/sdd1
Swap:
ID-1: swap-1 type: file size: 10 GiB used: 0 KiB (0.0%) priority: -2
file: /swapfile
Sensors:
System Temperatures: cpu: N/A mobo: N/A gpu: amdgpu temp: 46.0 C
Fan Speeds (RPM): N/A gpu: amdgpu fan: 841
Repos:
Packages: 2908 apt: 2884 flatpak: 24
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/cappelikan-ppa-jammy.list
1: deb [arch=amd64 signed-by=/etc/apt/keyrings/cappelikan-ppa-jammy.gpg] https://ppa.launchpadcontent.net/cappelikan/ppa/ubuntu jammy main
Active apt repos in: /etc/apt/sources.list.d/ernstp-mesarc-jammy.list
1: deb [arch=amd64 signed-by=/etc/apt/keyrings/ernstp-mesarc-jammy.gpg] https://ppa.launchpadcontent.net/ernstp/mesarc/ubuntu jammy main
Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main
Active apt repos in: /etc/apt/sources.list.d/kisak-kisak-mesa-jammy.list
1: deb [arch=amd64 signed-by=/etc/apt/keyrings/kisak-kisak-mesa-jammy.gpg] https://ppa.launchpadcontent.net/kisak/kisak-mesa/ubuntu jammy main
Active apt repos in: /etc/apt/sources.list.d/lunarg-vulkan-1.3.236-jammy.list
1: deb https://packages.lunarg.com/vulkan/1.3.236 jammy main
2: deb-src https://packages.lunarg.com/vulkan/1.3.236 jammy main
Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
1: deb http://packages.linuxmint.com vera main upstream import backport
2: deb http://mirror.brightridge.com/ubuntuarchive jammy main restricted universe multiverse
3: deb http://mirror.brightridge.com/ubuntuarchive jammy-updates main restricted universe multiverse
4: deb http://mirror.brightridge.com/ubuntuarchive jammy-backports main restricted universe multiverse
5: deb http://security.ubuntu.com/ubuntu/ jammy-security main restricted universe multiverse
Active apt repos in: /etc/apt/sources.list.d/openshot_developers-ppa-jammy.list
1: deb [arch=amd64 signed-by=/etc/apt/keyrings/openshot_developers-ppa-jammy.gpg] https://ppa.launchpadcontent.net/openshot.developers/ppa/ubuntu jammy main
Active apt repos in: /etc/apt/sources.list.d/pcsx2-team-pcsx2-daily-jammy.list
1: deb [arch=amd64 signed-by=/etc/apt/keyrings/pcsx2-team-pcsx2-daily-jammy.gpg] https://ppa.launchpadcontent.net/pcsx2-team/pcsx2-daily/ubuntu jammy main
Active apt repos in: /etc/apt/sources.list.d/teamviewer.list
1: deb [signed-by=/usr/share/keyrings/teamviewer-keyring.gpg] https://linux.teamviewer.com/deb stable main
Active apt repos in: /etc/apt/sources.list.d/teejee2008-ppa-jammy.list
1: deb [arch=amd64 signed-by=/etc/apt/keyrings/teejee2008-ppa-jammy.gpg] https://ppa.launchpadcontent.net/teejee2008/ppa/ubuntu jammy main
Active apt repos in: /etc/apt/sources.list.d/winehq-focal.sources
1: deb [arch=amd64 i386] https://dl.winehq.org/wine-builds/ubuntu focal main
Active apt repos in: /etc/apt/sources.list.d/winehq-jammy.sources
1: deb [arch=amd64 i386] https://dl.winehq.org/wine-builds/ubuntu jammy main
Info:
Processes: 498 Uptime: 17m Init: systemd v: 249 runlevel: 5 Compilers:
gcc: 11.3.0 alt: 11 Shell: Bash v: 5.1.16 running-in: gnome-terminal
inxi: 3.3.13Mint 21.2 Cinnamon 5.8.4
asrock x570 taichi ...bios p5.00
ryzen 5900x
128GB Kingston Fury @ 3600mhz
Corsair mp600 pro xt NVME ssd 4TB
three 4TB ssds
dual 1TB ssds
Two 16TB Toshiba hdd's
24GB amd 7900xtx vid card
Viewsonic Elite UHD 32" 144hz monitor
asrock x570 taichi ...bios p5.00
ryzen 5900x
128GB Kingston Fury @ 3600mhz
Corsair mp600 pro xt NVME ssd 4TB
three 4TB ssds
dual 1TB ssds
Two 16TB Toshiba hdd's
24GB amd 7900xtx vid card
Viewsonic Elite UHD 32" 144hz monitor