System Info from Github

Chat about anything related to Linux Mint
Post Reply
User avatar
Ozo
Level 5
Level 5
Posts: 642
Joined: Tue Dec 22, 2015 11:49 am
Location: Titusville, Florida USA

System Info from Github

Post by Ozo » Thu Dec 14, 2017 1:51 pm

18.3 has a link in System Info to supply the same data as an entry in the Terminal (inx1 -Fxz). It is Github.


Image


Here is the info I got from Github after clicking the Upload System Information button pictured above and waited about 4 seconds and there it was. It was already coded so easy to add to the forum post.



Desktop: Cinnamon 3.6.6 (Gtk 3.18.9-1ubuntu3.3) dm: lightdm Distro: Linux Mint 18.3 Sylvia
Machine: System: MICRO-STAR product: MS-B09611
Mobo: MICRO-STAR model: MS-B0961 v: 1.0
Bios: American Megatrends v: EB096IMS V1.2 date: 03/30/2015
CPU: Dual core Intel Celeron 3205U (-MCP-) cache: 2048 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 5985
clock speeds: min/max: 500/1500 MHz 1: 799 MHz 2: 799 MHz
G

Code: Select all

System:    Host: Bott7 Kernel: 4.10.0-38-generic x86_64 (64 bit gcc: 5.4.0)raphics:  Card: Intel Broadwell-U Integrated Graphics bus-ID: 00:02.0 chip-ID: 8086:1606
           Display Server: X.Org 1.18.4 drivers: intel (unloaded: fbdev,vesa)
           Resolution: 1680x1050@59.88hz
           GLX Renderer: Mesa DRI Intel Broadwell GT1 GLX Version: 3.0 Mesa 17.0.7 Direct Rendering: Yes
Audio:     Card-1 Intel Wildcat Point-LP High Definition Audio Controller
           driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:9ca0
           Card-2 Intel Broadwell-U Audio Controller
           driver: snd_hda_intel bus-ID: 00:03.0 chip-ID: 8086:160c
           Sound: Advanced Linux Sound Architecture v: k4.10.0-38-generic
Network:   Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169 v: 2.3LK-NAPI port: e000 bus-ID: 02:00.0 chip-ID: 10ec:8168
           IF: enp2s0 state: down mac: <filter>
           Card-2: Intel Wireless 3160 driver: iwlwifi bus-ID: 03:00.0 chip-ID: 8086:08b3
           IF: wlp3s0 state: up mac: <filter>
Drives:    HDD Total Size: 60.0GB (18.4% used)
           ID-1: /dev/sda model: OCZ size: 60.0GB serial: OCZ-RXR8E93VRG9O3KF5
Partition: ID-1: / size: 51G used: 6.6G (14%) fs: ext4 dev: /dev/dm-0
           ID-2: /boot size: 472M used: 68M (16%) fs: ext2 dev: /dev/sda1
           ID-3: swap-1 size: 4.19GB used: 0.02GB (1%) fs: swap dev: /dev/dm-1
RAID:      System: supported: N/A
           No RAID devices: /proc/mdstat, md_mod kernel module present
           Unused Devices: none
Sensors:   System Temperatures: cpu: 50.0C mobo: 27.8C
           Fan Speeds (in rpm): cpu: N/A
Repos:     Active apt sources in file: /etc/apt/sources.list.d/google-chrome.list
           deb [arch=amd64] http: //dl.google.com/linux/chrome/deb/ stable main
           Active apt sources in file: /etc/apt/sources.list.d/official-package-repositories.list
           deb http: //packages.linuxmint.com sylvia main upstream import backport #id:linuxmint_main
           deb http: //archive.ubuntu.com/ubuntu xenial main restricted universe multiverse
           deb http: //archive.ubuntu.com/ubuntu xenial-updates main restricted universe multiverse
           deb http: //archive.ubuntu.com/ubuntu xenial-backports main restricted universe multiverse
           deb http: //security.ubuntu.com/ubuntu/ xenial-security main restricted universe multiverse
           deb http: //archive.canonical.com/ubuntu/ xenial partner
Info:      Processes: 200 Uptime: 16:38 Memory: 2381.7/3846.1MB
           Init: systemd v: 229 runlevel: 5 default: 2 Gcc sys: 5.4.0
           Client: Unknown python2.7 client inxi: 2.2.35
You can also get the info in a zipped folder which looks like this You can scroll through the results. As you can see it is much easier to read than green on white.

Image
Last edited by Ozo on Fri Dec 15, 2017 11:29 am, edited 2 times in total.


Rocky Bennett
Level 4
Level 4
Posts: 369
Joined: Tue May 12, 2015 6:22 pm

Re: System Info from Github

Post by Rocky Bennett » Thu Dec 14, 2017 9:32 pm


I guess I will have to figure this out.

User avatar
Ozo
Level 5
Level 5
Posts: 642
Joined: Tue Dec 22, 2015 11:49 am
Location: Titusville, Florida USA

Re: System Info from Github

Post by Ozo » Fri Dec 15, 2017 11:23 am

Rocky Bennett wrote:

I guess I will have to figure this out.
I did this (coded terminal output) once and it was very easy and coded automatically but I can not reproduce that result. Time for input from the Gurus. If you "figure this out" please post it.

Post Reply

Return to “Chat about Linux Mint”