Mint Beta testers for the new inxi Perl release requested

Chat about Linux in general
h2-1
Level 3
Level 3
Posts: 186
Joined: Sat Oct 16, 2010 4:02 pm
Contact:

Re: Mint Beta testers for the new inxi Perl release requested

Post by h2-1 » Mon Mar 19, 2018 2:53 am

all41, your missing xorg driver loaded I don't believe is a pinxi issue, that probably can be found in xorg.0.log.

Easy to test: run: grep -E 'Loading|Unload|Failed' /var/log/Xorg.0.log

and post the output, that will show. If in doubt, paste your entire Xorg.0.log file and I can verify it.

Partition labels starting with escaped / are now converted, that's the
\x2fhome
those will now show the expected /home. Never seen a / used in a label, but that's what I'm looking for in beta testing, stuff I've never myself seen.

That's corrected in 2.9.00-0450-p

the tun0 device I suspect was an non identified usb device, maybe this one?: Device-6: Northstar Systems bus ID: 7:2 usb: 2.00

When those vendor specific classes and no network key words are used, there's no way for pinxi to know it's a networking device. I'm going to look into improving that, but that's the current state.

gnome-terminal- is a bug, notice the trailing -? I don't know how to fix that one, I've seen it before

h2-1
Level 3
Level 3
Posts: 186
Joined: Sat Oct 16, 2010 4:02 pm
Contact:

Re: Mint Beta testers for the new inxi Perl release requested

Post by h2-1 » Mon Mar 19, 2018 3:06 am

MrEen, your sample looks good, no issues I noticed.

=========================

phd21, I'm seeing the missing xorg driver there too, I'd want to see the complete /var/log/Xorg.0.log pasted somewhere, pastebin.com or whatever.

Or show: run: grep -E 'Loading|Unload|Failed' /var/log/Xorg.0.log

which will show basically the relevant data pinxi used.

audio usb driver is working nicely, that's good to see, that was hard to get running.

The usb networking device is failing to correctly get handled, but I know why that is, it's the last bug I have on my list, so I'll get that one fixed.

=========================

Pierre, it all looks good, thanks.

User avatar
Pjotr
Level 20
Level 20
Posts: 10781
Joined: Mon Mar 07, 2011 10:18 am
Location: The Netherlands (Holland)
Contact:

Re: Mint Beta testers for the new inxi Perl release requested

Post by Pjotr » Mon Mar 19, 2018 8:12 am

In a VirtualBox VM, with Xubuntu 18.04 Bionic:

Code: Select all

pjotr@pjotr-VirtualBox:~$ pinxi -zv8
System:    Host: pjotr-VirtualBox Kernel: 4.15.0-13-generic x86_64 bits: 64 compiler: gcc v: 7.3.0 
           Desktop: Xfce 4.12.3 (Gtk 2.24.31) info: xfce4-panel dm: lightdm 1.25.2 
           Distro: Ubuntu Bionic Beaver (development branch) 
Machine:   Type: Oracle System: innotek product: VirtualBox v: 1.2 serial: N/A Chassis: Oracle Corporation 
           type: 1 serial: N/A 
           Mobo: Oracle model: VirtualBox v: 1.2 serial: N/A BIOS: innotek v: VirtualBox date: 12/01/2006 
Memory:    RAM Report: permissions: Unable to run dmidecode. Are you root? 
PCI Slots: Permissions: Unable to run dmidecode. Are you root? 
CPU:       Topology: Single Core model: Intel Pentium G860 type: UP arch: Sandy Bridge rev: 7 L2 cache: 3072 KB 
           flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 bogomips: 5986 
           Speed: 2993 MHz min/max: N/A Core speed: 1: 2993 
Graphics:  Card-1: InnoTek Systemberatung VirtualBox Graphics Adapter driver: vboxvideo v: kernel 
           bus ID: 00:02.0 chip ID: 80ee:beef 
           Display Server: x11 (X.Org 1.19.6) driver: none unloaded: vesa,modesetting,fbdev,vboxvideo 
           resolution: 1920x983~60Hz 
           OpenGL: renderer: llvmpipe (LLVM 5.0 128 bits) version: 3.3 Mesa 18.0.0-rc4 compat-v: 3.0 
           direct render: Yes 
Audio:     Card-1: Intel 82801AA AC97 Audio Controller driver: snd_intel8x0 v: kernel bus ID: 00:05.0 
           chip ID: 8086:2415 
           Sound Server: ALSA v: k4.15.0-13-generic 
Network:   Card-1: Intel 82540EM Gigabit Ethernet Controller driver: e1000 v: 7.3.21-k8-NAPI port: d010 
           bus ID: 00:03 chip ID: 8086:100e 
           IF: enp0s3 state: up speed: 1000 Mbps duplex: full mac: <filter> 
           IP v4: <filter> type: dynamic noprefixroute enp0s3 scope: global broadcast: <filter> 
           IP v6: <filter> virtual: noprefixroute scope: link 
           WAN IP: <filter> 
Drives:    HDD Total Size: 10.73 GB used: 6.54 GB (61.0%) 
           ID-1: /dev/sda model: VBOX_HARDDISK size: 10.73 GB serial: <filter> rev: 1.0 
           Optical-1: /dev/sr0 vendor: VBOX model: CD-ROM rev: 1.0  dev-links: cdrom,dvd 
           Features: speed: 32 multisession: yes audio: yes dvd: yes rw: none state: running 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / size: 10.50 GB used: 6.54 GB (62.3%) fs: ext4 dev: /dev/sda1 label: N/A 
           uuid: dd933f3e-9d64-4c24-82e5-d1193ad58e8a 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1:1 usb: 2.00 type: Full speed (or root) hub chip ID: 1d6b:0002 
           Hub: 2:1 usb: 1.10 type: Full speed (or root) hub chip ID: 1d6b:0001 
           Device-1: VirtualBox USB Tablet bus ID: 2:2 usb: 1.10 type: Human Interface Device 
           chip ID: 80ee:0021 
Sensors:   Message: No sensors data was found. Is sensors configured? 
Repos:     Active apt sources in: /etc/apt/sources.list 
           1: deb http://nl.archive.ubuntu.com/ubuntu/ bionic main restricted
           2: deb http://nl.archive.ubuntu.com/ubuntu/ bionic-updates main restricted
           3: deb http://nl.archive.ubuntu.com/ubuntu/ bionic universe
           4: deb http://nl.archive.ubuntu.com/ubuntu/ bionic-updates universe
           5: deb http://nl.archive.ubuntu.com/ubuntu/ bionic multiverse
           6: deb http://nl.archive.ubuntu.com/ubuntu/ bionic-updates multiverse
           7: deb http://nl.archive.ubuntu.com/ubuntu/ bionic-backports main restricted universe multiverse
           8: deb http://security.ubuntu.com/ubuntu bionic-security main restricted
           9: deb http://security.ubuntu.com/ubuntu bionic-security universe
           10: deb http://security.ubuntu.com/ubuntu bionic-security multiverse
           11: deb http://nl.archive.ubuntu.com/ubuntu/ bionic-proposed multiverse main universe restricted
Processes: CPU  % used - Command - pid - Memory: MB / % used - top: 5 
           1: cpu: 13.4% command: firefox pid: 1063 mem: 236.7MB (11.8%) 
           2: cpu: 9.8% command: firefox pid: 1005 mem: 331.2MB (16.6%) 
           3: cpu: 5.8% command: xorg pid: 496 mem: 107.3MB (5.3%) 
           4: cpu: 2.4% command: xfce4-terminal pid: 1267 mem: 33.1MB (1.6%) 
           5: cpu: 0.4% command: init pid: 1 mem: 8.59MB (0.4%) 
           Memory MB/% used - Command - pid - CPU: % used - top: 5 
           1: mem: 331.2 MB (9.8%) command: firefox pid: 1005 cpu: 16.6% 
           2: mem: 236.7 MB (13.4%) command: firefox pid: 1063 cpu: 11.8% 
           3: mem: 107.3 MB (5.8%) command: xorg pid: 496 cpu: 5.3% 
           4: mem: 80.7 MB (0.1%) command: firefox pid: 1108 cpu: 4.0% 
           5: mem: 49.1 MB (0.1%) command: blueman-applet started by: python3 pid: 844 cpu: 2.4% 
Info:      Processes: 137 Uptime: 4 min Memory: 1.95 GB used: 678.7 MB (34.0%) Init: systemd v: 237 runlevel: 5 
           Compilers: gcc: 7.3.0 alt: 7 Shell: bash 4.4.18 running in: xfce4-terminal pinxi: 2.9.00-451-p 
pjotr@pjotr-VirtualBox:~$ 
I notice that the RAM report asks for root permissions (for dmidecode). This doesn't seem desirable? It seems to me, that pinxi should provide full hardware information without any root permissions....
Tip: 10 things to do after installing Linux Mint 19 Tara
Keep your Linux Mint healthy: Avoid these 10 fatal mistakes
Twitter: twitter.com/easylinuxtips
All in all, horse sense simply makes sense.

User avatar
thx-1138
Level 6
Level 6
Posts: 1094
Joined: Fri Mar 10, 2017 12:15 pm
Location: Athens, Greece

Re: Mint Beta testers for the new inxi Perl release requested

Post by thx-1138 » Mon Mar 19, 2018 8:43 am

Pjotr wrote:
Mon Mar 19, 2018 8:12 am
I notice that the RAM report asks for root permissions (for dmidecode). This doesn't seem desirable? It seems to me, that pinxi should provide full hardware information without any root permissions....
inxi -zv7 also asks / asked root permissions for dmidecode... (there is no --verbosity level 8 for inxi...) (query [p]inxi -m)...

User avatar
all41
Level 13
Level 13
Posts: 4637
Joined: Tue Dec 31, 2013 9:12 am
Location: Computer, Car, Cage

Re: Mint Beta testers for the new inxi Perl release requested

Post by all41 » Mon Mar 19, 2018 9:27 am

h2-1 wrote:
Mon Mar 19, 2018 2:53 am
all41, your missing xorg driver loaded I don't believe is a pinxi issue, that probably can be found in xorg.0.log.

Easy to test: run: grep -E 'Loading|Unload|Failed' /var/log/Xorg.0.log

and post the output, that will show. If in doubt, paste your entire Xorg.0.log file and I can verify it.

Partition labels starting with escaped / are now converted, that's the
\x2fhome
those will now show the expected /home. Never seen a / used in a label, but that's what I'm looking for in beta testing, stuff I've never myself seen.

That's corrected in 2.9.00-0450-p

the tun0 device I suspect was an non identified usb device, maybe this one?: Device-6: Northstar Systems bus ID: 7:2 usb: 2.00

When those vendor specific classes and no network key words are used, there's no way for pinxi to know it's a networking device. I'm going to look into improving that, but that's the current state.

gnome-terminal- is a bug, notice the trailing -? I don't know how to fix that one, I've seen it before

Code: Select all

uno@Labonline ~ $ grep -E 'Loading|Unload|Failed' /var/log/Xorg.0.log
[    25.481] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    25.802] (II) UnloadModule: "nvidia"
[    25.802] (II) Unloading nvidia
[    25.802] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    25.802] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    25.844] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    25.844] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    25.845] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    25.845] (II) UnloadModule: "nvidia"
[    25.845] (II) Unloading nvidia
[    25.845] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    25.845] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    25.845] (II) UnloadModule: "nouveau"
[    25.845] (II) Unloading nouveau
[    25.845] (II) Failed to load module "nouveau" (already loaded, 0)
[    25.846] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    25.846] (II) UnloadModule: "modesetting"
[    25.846] (II) Unloading modesetting
[    25.846] (II) Failed to load module "modesetting" (already loaded, 0)
[    25.846] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    25.846] (II) UnloadModule: "fbdev"
[    25.846] (II) Unloading fbdev
[    25.846] (II) Failed to load module "fbdev" (already loaded, 0)
[    25.846] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    25.846] (II) UnloadModule: "vesa"
[    25.846] (II) Unloading vesa
[    25.846] (II) Failed to load module "vesa" (already loaded, 0)
[    25.849] (II) Loading sub module "fbdevhw"
[    25.849] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    25.849] (II) Loading sub module "dri2"
[    26.244] (II) Loading sub module "fb"
[    26.244] (II) Loading /usr/lib/xorg/modules/libfb.so
[    26.252] (II) Loading sub module "shadowfb"
[    26.252] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    26.252] (II) UnloadModule: "modesetting"
[    26.252] (II) Unloading modesetting
[    26.252] (II) UnloadModule: "fbdev"
[    26.252] (II) Unloading fbdev
[    26.252] (II) UnloadSubModule: "fbdevhw"
[    26.252] (II) Unloading fbdevhw
[    26.253] (II) UnloadModule: "vesa"
[    26.253] (II) Unloading vesa
[    26.323] (II) Loading sub module "exa"
[    26.323] (II) Loading /usr/lib/xorg/modules/libexa.so
[    27.027] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    43.622] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
uno@Labonline ~ $ 
The usb device is probably the port expander plugged into a rear panel port. This had a wireless keyboard/mouse receiver and a charging cable for a Logitech wireless trackpad connected.
There was a bluetooth receiver stub in a front panel usb port and a 32gb usb flash in another front usb port.

Code: Select all

uno@Labonline ~ $ sudo pinxi -Fxz
[sudo] password for uno: 
System:
  Host: Labonline Kernel: 4.4.0-116-generic x86_64 bits: 64 compiler: gcc 
  v: 4.8.4 Desktop: N/A Distro: Linux Mint 17.3 Rosa   
Machine:
  Type: Desktop System: LENOVO product: 4157D51 v: ThinkStation S20 
  serial: <filter> 
  Mobo: LENOVO model: LENOVO serial: N/A BIOS: LENOVO v: 60KT47AUS 
  date: 01/15/2014 
CPU:
  Topology: Quad Core model: Intel Xeon W3550 type: MT MCP arch: Nehalem 
  L2 cache: 8192 KB 
  flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 48948 
  Speed: 1596 MHz min/max: 1596/3060 MHz Core speeds: 1: 1596 2: 1596 
  3: 1596 4: 1596 5: 1596 6: 1596 7: 1596 8: 1596 
Graphics:
  Card-1: NVIDIA G96GL [Quadro FX 580] driver: nouveau v: kernel 
  bus ID: 02:00.0 
  Display Server: X.Org 1.17.1 driver: none 
  unloaded: nouveau,modesetting,fbdev,nvidia,vesa resolution: 1920x1080~60Hz 
  OpenGL: renderer: Gallium 0.4 on NV96 version: 3.3 Mesa 10.5.9 
  direct render: Yes 
Audio:
  Card-1: Intel 82801JI (ICH10 Family) HD Audio Controller 
  driver: snd_hda_intel bus ID: 00:1b.0 
  Sound Server: ALSA v: k4.4.0-116-generic 
Network:
  Card-1: Intel 82574L Gigabit Network Connection driver: e1000e v: 3.2.6-k 
  port: 3000 bus ID: 04:00 
  IF: eth1 state: down mac: <filter> 
  Card-2: Broadcom NetXtreme BCM5755 Gigabit Ethernet PCI Express 
  driver: tg3 v: 3.137 port: N/A bus ID: 05:00 
  IF: eth2 state: up speed: 1000 Mbps duplex: full mac: <filter> 
Drives:
  HDD Total Size: 530.85 GB used: 19.14 GB (3.6%) 
  ID-1: /dev/sda model: WDC_WD1600HLFS-7 size: 149.01 GB temp: 31 C 
  ID-2: /dev/sdb model: WDC_WD2500AAJS-7 size: 232.83 GB temp: 34 C 
  ID-3: /dev/sdc model: WDC_WD1600HLFS-7 size: 149.01 GB temp: 32 C 
Partition:
  ID-1: / size: 71.22 GB used: 19.14 GB (26.9%) fs: ext4 dev: /dev/sda5 
Sensors:
  System Temperatures: cpu: 29.5 C mobo: 19.0 C gpu: nouveau temp: 48 C 
  Fan Speeds (in RPM): cpu: 1214 fan-1: 0 fan-3: 0 fan-4: 1028 fan-5: 0 
  gpu: nouveau fan: 0 
Info:
  Processes: 234 Uptime: 53 min Memory: 15.66 GB used: 790.0 MB (4.9%) 
  Init: Upstart runlevel: 2 Compilers: gcc: 4.8.4 Shell: bash 4.3.11 
  pinxi: 2.9.00-444-p 
uno@Labonline ~ $ 
Proud to be a supporter and monthly contributor to Mint.

User avatar
phd21
Level 16
Level 16
Posts: 6767
Joined: Thu Jan 09, 2014 9:42 pm
Location: Florida

Re: Mint Beta testers for the new inxi Perl release requested

Post by phd21 » Mon Mar 19, 2018 11:46 am

Hi "h2-1",
h2-1 wrote:phd21, I'm seeing the missing xorg driver there too, I'd want to see the complete /var/log/Xorg.0.log pasted somewhere, pastebin.com or whatever.
FYI: I was recently going over my Linux Mint KDE v18.2 (Ubuntu 16.04) and v17.3 (ubuntu 14.04) setup and using instructions for speeding up Linux Mint from member Pjotr's wonderful Linux website. One of its instructions I just tried recently was to remove the "xserver-xorg-video-intel" driver as it could be slowing down my already ancient under-powered computer. I wonder if that is what is causing the "missing xorg driver" in the results of "pinxi"? Honestly, I cannot tell a difference with this driver loaded or unloaded. I could easily re-install that, if it would help, let me know.

See item #6 of "Speed up your Mint! - Easy Linux tips project"
https://sites.google.com/site/easylinux ... l-graphics

cat /var/log/Xorg.0.log

Code: Select all

 
[    11.926] (--) Log file renamed from "/var/log/Xorg.pid-1292.log" to "/var/log/Xorg.0.log"
[    11.927] 
X.Org X Server 1.18.4
Release Date: 2016-07-19
[    11.927] X Protocol Version 11, Revision 0
[    11.927] Build Operating System: Linux 4.4.0-97-generic x86_64 Ubuntu
[    11.927] Current Operating System: Linux lm18 4.14.12-041412-generic #201801051649 SMP Fri Jan 5 16:50:54 UTC 2018 x86_64
[    11.927] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.14.12-041412-generic root=UUID=66ecc341-0224-426f-bb8a-efea2671d853 ro quiet splash
[    11.927] Build Date: 13 October 2017  01:57:05PM
[    11.927] xorg-server 2:1.18.4-0ubuntu0.7 (For technical support please see http://www.ubuntu.com/support) 
[    11.927] Current version of pixman: 0.33.6
[    11.927]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    11.927] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    11.927] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 18 23:27:35 2018
[    11.931] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    11.935] (==) No Layout section.  Using the first Screen section.
[    11.935] (==) No screen section available. Using defaults.
[    11.935] (**) |-->Screen "Default Screen Section" (0)
[    11.935] (**) |   |-->Monitor "<default monitor>"
[    11.936] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[    11.936] (==) Automatically adding devices
[    11.936] (==) Automatically enabling devices
[    11.936] (==) Automatically adding GPU devices
[    11.936] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    11.950] (==) FontPath set to:
        /usr/share/fonts/X11/misc,
        /usr/share/fonts/X11/cyrillic,
        /usr/share/fonts/X11/100dpi/:unscaled,
        /usr/share/fonts/X11/75dpi/:unscaled,
        /usr/share/fonts/X11/Type1,
        /usr/share/fonts/X11/100dpi,
        /usr/share/fonts/X11/75dpi,
        built-ins
[    11.950] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"                                                                       
[    11.950] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[    11.950] (II) Loader magic: 0x55b51c2f1dc0
[    11.950] (II) Module ABI versions:
[    11.950]    X.Org ANSI C Emulation: 0.4
[    11.950]    X.Org Video Driver: 20.0
[    11.950]    X.Org XInput driver : 22.1
[    11.950]    X.Org Server Extension : 9.0
[    11.951] (++) using VT number 7

[    11.951] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    11.951] (II) xfree86: Adding drm device (/dev/dri/card0)
[    11.951] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[    11.951] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[    11.952] (--) PCI:*(0:0:2:0) 8086:2e12:1028:0420 rev 3, Mem @ 0xf7c00000/4194304, 0xe0000000/268435456, I/O @ 0x0000ecb0/8, BIOS @ 0x????????/131072
[    11.952] (--) PCI: (0:0:2:1) 8086:2e13:1028:0420 rev 3, Mem @ 0xf7b00000/1048576
[    11.952] (II) LoadModule: "glx"
[    11.963] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    12.002] (II) Module glx: vendor="X.Org Foundation"
[    12.002]    compiled for 1.18.4, module version = 1.0.0
[    12.002]    ABI class: X.Org Server Extension, version 9.0
[    12.002] (==) AIGLX enabled
[    12.002] (==) Matched intel as autoconfigured driver 0
[    12.002] (==) Matched modesetting as autoconfigured driver 1
[    12.002] (==) Matched fbdev as autoconfigured driver 2
[    12.002] (==) Matched vesa as autoconfigured driver 3
[    12.002] (==) Assigned the driver to the xf86ConfigLayout
[    12.002] (II) LoadModule: "intel"
[    12.003] (WW) Warning, couldn't open module intel
[    12.003] (II) UnloadModule: "intel"
[    12.003] (II) Unloading intel
[    12.003] (EE) Failed to load module "intel" (module does not exist, 0)
[    12.003] (II) LoadModule: "modesetting"
[    12.004] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    12.005] (II) Module modesetting: vendor="X.Org Foundation"
[    12.005]    compiled for 1.18.4, module version = 1.18.4
[    12.005]    Module class: X.Org Video Driver
[    12.005]    ABI class: X.Org Video Driver, version 20.0
[    12.005] (II) LoadModule: "fbdev"
[    12.005] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    12.008] (II) Module fbdev: vendor="X.Org Foundation"
[    12.008]    compiled for 1.18.1, module version = 0.4.4
[    12.008]    Module class: X.Org Video Driver
[    12.008]    ABI class: X.Org Video Driver, version 20.0
[    12.008] (II) LoadModule: "vesa"
[    12.008] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    12.013] (II) Module vesa: vendor="X.Org Foundation"
[    12.013]    compiled for 1.18.1, module version = 2.3.4
[    12.013]    Module class: X.Org Video Driver
[    12.013]    ABI class: X.Org Video Driver, version 20.0
[    12.013] (==) Matched intel as autoconfigured driver 0
[    12.013] (==) Matched modesetting as autoconfigured driver 1
[    12.013] (==) Matched fbdev as autoconfigured driver 2
[    12.013] (==) Matched vesa as autoconfigured driver 3
[    12.013] (==) Assigned the driver to the xf86ConfigLayout
[    12.013] (II) LoadModule: "intel"
[    12.013] (WW) Warning, couldn't open module intel
[    12.013] (II) UnloadModule: "intel"
[    12.013] (II) Unloading intel
[    12.013] (EE) Failed to load module "intel" (module does not exist, 0)
[    12.013] (II) LoadModule: "modesetting"
[    12.013] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    12.013] (II) Module modesetting: vendor="X.Org Foundation"
[    12.013]    compiled for 1.18.4, module version = 1.18.4
[    12.013]    Module class: X.Org Video Driver
[    12.013]    ABI class: X.Org Video Driver, version 20.0
[    12.013] (II) UnloadModule: "modesetting"
[    12.013] (II) Unloading modesetting
[    12.013] (II) Failed to load module "modesetting" (already loaded, 0)
[    12.013] (II) LoadModule: "fbdev"
[    12.013] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    12.013] (II) Module fbdev: vendor="X.Org Foundation"
[    12.013]    compiled for 1.18.1, module version = 0.4.4
[    12.013]    Module class: X.Org Video Driver
[    12.013]    ABI class: X.Org Video Driver, version 20.0
[    12.013] (II) UnloadModule: "fbdev"
[    12.013] (II) Unloading fbdev
[    12.013] (II) Failed to load module "fbdev" (already loaded, 0)
[    12.013] (II) LoadModule: "vesa"
[    12.013] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    12.013] (II) Module vesa: vendor="X.Org Foundation"
[    12.013]    compiled for 1.18.1, module version = 2.3.4
[    12.013]    Module class: X.Org Video Driver
[    12.013]    ABI class: X.Org Video Driver, version 20.0
[    12.013] (II) UnloadModule: "vesa"
[    12.013] (II) Unloading vesa
[    12.013] (II) Failed to load module "vesa" (already loaded, 0)
[    12.014] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    12.014] (II) FBDEV: driver for framebuffer: fbdev
[    12.014] (II) VESA: driver for VESA chipsets: vesa
[    12.036] (**) modeset(0): claimed PCI slot 0@0:2:0
[    12.036] (II) modeset(0): using default device
[    12.036] (WW) Falling back to old probe method for fbdev
[    12.036] (II) Loading sub module "fbdevhw"
[    12.036] (II) LoadModule: "fbdevhw"
[    12.036] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    12.039] (II) Module fbdevhw: vendor="X.Org Foundation"
[    12.039]    compiled for 1.18.4, module version = 0.0.2
[    12.039]    ABI class: X.Org Video Driver, version 20.0
[    12.039] (WW) Falling back to old probe method for vesa
[    12.039] (II) modeset(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[    12.039] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    12.039] (==) modeset(0): RGB weight 888
[    12.039] (==) modeset(0): Default visual is TrueColor
[    12.039] (II) Loading sub module "glamoregl"
[    12.039] (II) LoadModule: "glamoregl"
[    12.039] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    12.058] (II) Module glamoregl: vendor="X.Org Foundation"
[    12.058]    compiled for 1.18.4, module version = 1.0.0
[    12.058]    ABI class: X.Org ANSI C Emulation, version 0.4
[    12.058] (II) glamor: OpenGL accelerated X.org driver based.
[    12.197] (II) glamor: EGL version 1.4 (DRI2):
[    12.246] (II) modeset(0): glamor initialized
[    12.304] (II) modeset(0): Output VGA-1 has no monitor section
[    12.311] (II) modeset(0): Output HDMI-1 has no monitor section
[    12.311] (II) modeset(0): Output DP-1 has no monitor section
[    12.375] (II) modeset(0): EDID for output VGA-1
[    12.375] (II) modeset(0): Manufacturer: DEL  Model: f005  Serial#: 927019347
[    12.375] (II) modeset(0): Year: 2007  Week: 37
[    12.375] (II) modeset(0): EDID Version: 1.3
[    12.375] (II) modeset(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[    12.375] (II) modeset(0): Sync:  Separate
[    12.375] (II) modeset(0): Max Image Size [cm]: horiz.: 41  vert.: 26
[    12.375] (II) modeset(0): Gamma: 2.20
[    12.375] (II) modeset(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[    12.375] (II) modeset(0): Default color space is primary color space
[    12.375] (II) modeset(0): First detailed timing is preferred mode
[    12.375] (II) modeset(0): redX: 0.640 redY: 0.336   greenX: 0.293 greenY: 0.599
[    12.375] (II) modeset(0): blueX: 0.152 blueY: 0.068   whiteX: 0.313 whiteY: 0.329
[    12.375] (II) modeset(0): Supported established timings:
[    12.375] (II) modeset(0): 720x400@70Hz
[    12.375] (II) modeset(0): 640x480@60Hz
[    12.375] (II) modeset(0): 640x480@67Hz
[    12.375] (II) modeset(0): 640x480@72Hz
[    12.375] (II) modeset(0): 640x480@75Hz
[    12.375] (II) modeset(0): 800x600@56Hz
[    12.375] (II) modeset(0): 800x600@60Hz
[    12.375] (II) modeset(0): 800x600@72Hz
[    12.375] (II) modeset(0): 800x600@75Hz
[    12.376] (II) modeset(0): 832x624@75Hz
[    12.376] (II) modeset(0): 1024x768@60Hz
[    12.376] (II) modeset(0): 1024x768@70Hz
[    12.376] (II) modeset(0): 1024x768@75Hz
[    12.376] (II) modeset(0): 1280x1024@75Hz
[    12.376] (II) modeset(0): 1152x864@75Hz
[    12.376] (II) modeset(0): Manufacturer's mask: 0
[    12.376] (II) modeset(0): Supported standard timings:
[    12.376] (II) modeset(0): #0: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    12.376] (II) modeset(0): #1: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    12.376] (II) modeset(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    12.376] (II) modeset(0): #3: hsize: 1440  vsize 900  refresh: 75  vid: 3989
[    12.376] (II) modeset(0): Supported detailed timing:
[    12.376] (II) modeset(0): clock: 106.5 MHz   Image Size:  408 x 255 mm
[    12.376] (II) modeset(0): h_active: 1440  h_sync: 1520  h_sync_end 1672 h_blank_end 1904 h_border: 0
[    12.376] (II) modeset(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 934 v_border: 0
[    12.376] (II) modeset(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[    12.376] (II) modeset(0): Serial No: 7373179A7A1S
[    12.376] (II) modeset(0): Monitor name: DELL E198WFP
[    12.376] (II) modeset(0): EDID (in hex):
[    12.376] (II) modeset(0):   00ffffffffffff0010ac05f053314137
[    12.376] (II) modeset(0):   2511010368291a78eec125a3564b9927
[    12.376] (II) modeset(0):   115054bfef809500714f8180950f0101
[    12.376] (II) modeset(0):   0101010101019a29a0d0518422305098
[    12.376] (II) modeset(0):   360098ff1000001c000000fd00384b1e
[    12.376] (II) modeset(0):   530e000a202020202020000000ff0037
[    12.376] (II) modeset(0):   333733313739413741315320000000fc
[    12.376] (II) modeset(0):   0044454c4c20453139385746500a004f
[    12.376] (II) modeset(0): Printing probed modes for output VGA-1
[    12.376] (II) modeset(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz eP)
[    12.376] (II) modeset(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    12.376] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    12.376] (II) modeset(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    12.376] (II) modeset(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    12.376] (II) modeset(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    12.376] (II) modeset(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    12.376] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    12.376] (II) modeset(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    12.376] (II) modeset(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    12.376] (II) modeset(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    12.376] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    12.376] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    12.376] (II) modeset(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    12.376] (II) modeset(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    12.376] (II) modeset(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    12.376] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    12.376] (II) modeset(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    12.384] (II) modeset(0): EDID for output HDMI-1
[    12.385] (II) modeset(0): EDID for output DP-1
[    12.385] (II) modeset(0): Output VGA-1 connected
[    12.385] (II) modeset(0): Output HDMI-1 disconnected
[    12.385] (II) modeset(0): Output DP-1 disconnected
[    12.385] (II) modeset(0): Using exact sizes for initial modes
[    12.385] (II) modeset(0): Output VGA-1 using initial mode 1440x900 +0+0
[    12.385] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    12.385] (==) modeset(0): DPI set to (96, 96)
[    12.385] (II) Loading sub module "fb"
[    12.385] (II) LoadModule: "fb"
[    12.385] (II) Loading /usr/lib/xorg/modules/libfb.so
[    12.392] (II) Module fb: vendor="X.Org Foundation"
[    12.392]    compiled for 1.18.4, module version = 1.0.0
[    12.392]    ABI class: X.Org ANSI C Emulation, version 0.4
[    12.392] (II) UnloadModule: "fbdev"
[    12.392] (II) Unloading fbdev
[    12.392] (II) UnloadSubModule: "fbdevhw"
[    12.392] (II) Unloading fbdevhw
[    12.392] (II) UnloadModule: "vesa"
[    12.392] (II) Unloading vesa
[    12.392] (==) Depth 24 pixmap format is 32 bpp
[    12.628] (==) modeset(0): Backing store enabled
[    12.628] (==) modeset(0): Silken mouse enabled
[    12.629] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    12.640] (==) modeset(0): DPMS enabled
[    12.640] (II) modeset(0): [DRI2] Setup complete
[    12.640] (II) modeset(0): [DRI2]   DRI driver: i965
[    12.640] (II) modeset(0): [DRI2]   VDPAU driver: i965
[    12.685] (--) RandR disabled
[    12.689] (II) SELinux: Disabled on system
[    12.704] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    12.704] (II) AIGLX: enabled GLX_ARB_create_context
[    12.704] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    12.704] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    12.704] (II) AIGLX: enabled GLX_INTEL_swap_event
[    12.704] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    12.704] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    12.704] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    12.704] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    12.704] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    12.704] (II) AIGLX: Loaded and initialized i965
[    12.704] (II) GLX: Initialized DRI2 GL provider for screen 0
[    12.753] (II) modeset(0): Damage tracking initialized
[    12.753] (II) modeset(0): Setting screen physical size to 381 x 238
[    12.894] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    12.894] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    12.894] (II) LoadModule: "evdev"
[    12.894] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    12.899] (II) Module evdev: vendor="X.Org Foundation"
[    12.899]    compiled for 1.18.1, module version = 2.10.1
[    12.899]    Module class: X.Org XInput Driver
[    12.899]    ABI class: X.Org XInput driver, version 22.1
[    12.899] (II) Using input driver 'evdev' for 'Power Button'
[    12.899] (**) Power Button: always reports core events
[    12.899] (**) evdev: Power Button: Device: "/dev/input/event1"
[    12.899] (--) evdev: Power Button: Vendor 0 Product 0x1
[    12.899] (--) evdev: Power Button: Found keys
[    12.899] (II) evdev: Power Button: Configuring as keyboard
[    12.899] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    12.899] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    12.899] (**) Option "xkb_rules" "evdev"
[    12.899] (**) Option "xkb_model" "pc105"
[    12.899] (**) Option "xkb_layout" "us"
[    12.900] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    12.900] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    12.900] (II) Using input driver 'evdev' for 'Power Button'
[    12.900] (**) Power Button: always reports core events
[    12.900] (**) evdev: Power Button: Device: "/dev/input/event0"
[    12.900] (--) evdev: Power Button: Vendor 0 Product 0x1
[    12.900] (--) evdev: Power Button: Found keys
[    12.900] (II) evdev: Power Button: Configuring as keyboard
[    12.900] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    12.900] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    12.900] (**) Option "xkb_rules" "evdev"
[    12.900] (**) Option "xkb_model" "pc105"
[    12.900] (**) Option "xkb_layout" "us"
[    12.901] (II) config/udev: Adding drm device (/dev/dri/card0)
[    12.901] (II) xfree86: Adding drm device (/dev/dri/card0)
[    12.901] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[    12.901] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[    12.901] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1024 (/dev/input/event2)
[    12.901] (**) Logitech Unifying Device. Wireless PID:1024: Applying InputClass "evdev pointer catchall"
[    12.901] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:1024'
[    12.901] (**) Logitech Unifying Device. Wireless PID:1024: always reports core events
[    12.901] (**) evdev: Logitech Unifying Device. Wireless PID:1024: Device: "/dev/input/event2"
[    12.901] (--) evdev: Logitech Unifying Device. Wireless PID:1024: Vendor 0x46d Product 0x1024
[    12.901] (--) evdev: Logitech Unifying Device. Wireless PID:1024: Found 20 mouse buttons
[    12.901] (--) evdev: Logitech Unifying Device. Wireless PID:1024: Found scroll wheel(s)
[    12.901] (--) evdev: Logitech Unifying Device. Wireless PID:1024: Found relative axes
[    12.901] (--) evdev: Logitech Unifying Device. Wireless PID:1024: Found x and y relative axes
[    12.901] (II) evdev: Logitech Unifying Device. Wireless PID:1024: Configuring as mouse
[    12.902] (II) evdev: Logitech Unifying Device. Wireless PID:1024: Adding scrollwheel support
[    12.902] (**) evdev: Logitech Unifying Device. Wireless PID:1024: YAxisMapping: buttons 4 and 5
[    12.902] (**) evdev: Logitech Unifying Device. Wireless PID:1024: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    12.902] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:1024.0004/input/input5/event2"
[    12.902] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:1024" (type: MOUSE, id 8)
[    12.902] (II) evdev: Logitech Unifying Device. Wireless PID:1024: initialized for relative axes.
[    12.902] (**) Logitech Unifying Device. Wireless PID:1024: (accel) keeping acceleration scheme 1
[    12.902] (**) Logitech Unifying Device. Wireless PID:1024: (accel) acceleration profile 0
[    12.902] (**) Logitech Unifying Device. Wireless PID:1024: (accel) acceleration factor: 2.000
[    12.902] (**) Logitech Unifying Device. Wireless PID:1024: (accel) acceleration threshold: 4
[    12.902] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1024 (/dev/input/mouse0)
[    12.902] (II) No input driver specified, ignoring this device.
[    12.902] (II) This device may have been added with another device file.
[    12.903] (II) config/udev: Adding input device Logitech K520 (/dev/input/event3)
[    12.903] (**) Logitech K520: Applying InputClass "evdev keyboard catchall"
[    12.903] (II) Using input driver 'evdev' for 'Logitech K520'
[    12.903] (**) Logitech K520: always reports core events
[    12.903] (**) evdev: Logitech K520: Device: "/dev/input/event3"
[    12.903] (--) evdev: Logitech K520: Vendor 0x46d Product 0x2011
[    12.903] (--) evdev: Logitech K520: Found 1 mouse buttons
[    12.903] (--) evdev: Logitech K520: Found scroll wheel(s)
[    12.903] (--) evdev: Logitech K520: Found relative axes
[    12.903] (II) evdev: Logitech K520: Forcing relative x/y axes to exist.
[    12.903] (--) evdev: Logitech K520: Found absolute axes
[    12.903] (II) evdev: Logitech K520: Forcing absolute x/y axes to exist.
[    12.903] (--) evdev: Logitech K520: Found keys
[    12.903] (II) evdev: Logitech K520: Configuring as mouse
[    12.903] (II) evdev: Logitech K520: Configuring as keyboard
[    12.903] (II) evdev: Logitech K520: Adding scrollwheel support
[    12.903] (**) evdev: Logitech K520: YAxisMapping: buttons 4 and 5
[    12.903] (**) evdev: Logitech K520: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    12.903] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:2011.0005/input/input6/event3"
[    12.903] (II) XINPUT: Adding extended input device "Logitech K520" (type: KEYBOARD, id 9)
[    12.903] (**) Option "xkb_rules" "evdev"
[    12.903] (**) Option "xkb_model" "pc105"
[    12.903] (**) Option "xkb_layout" "us"
[    12.903] (II) evdev: Logitech K520: initialized for relative axes.
[    12.903] (WW) evdev: Logitech K520: ignoring absolute axes.
[    12.905] (**) Logitech K520: (accel) keeping acceleration scheme 1
[    12.905] (**) Logitech K520: (accel) acceleration profile 0
[    12.905] (**) Logitech K520: (accel) acceleration factor: 2.000
[    12.905] (**) Logitech K520: (accel) acceleration threshold: 4
[    12.906] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4007 (/dev/input/event4)
[    12.906] (**) Logitech Unifying Device. Wireless PID:4007: Applying InputClass "evdev pointer catchall"
[    12.906] (**) Logitech Unifying Device. Wireless PID:4007: Applying InputClass "evdev keyboard catchall"
[    12.906] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4007'
[    12.906] (**) Logitech Unifying Device. Wireless PID:4007: always reports core events
[    12.906] (**) evdev: Logitech Unifying Device. Wireless PID:4007: Device: "/dev/input/event4"
[    12.906] (--) evdev: Logitech Unifying Device. Wireless PID:4007: Vendor 0x46d Product 0x4007
[    12.906] (--) evdev: Logitech Unifying Device. Wireless PID:4007: Found 20 mouse buttons
[    12.906] (--) evdev: Logitech Unifying Device. Wireless PID:4007: Found scroll wheel(s)
[    12.906] (--) evdev: Logitech Unifying Device. Wireless PID:4007: Found relative axes
[    12.906] (--) evdev: Logitech Unifying Device. Wireless PID:4007: Found x and y relative axes
[    12.906] (--) evdev: Logitech Unifying Device. Wireless PID:4007: Found absolute axes
[    12.906] (II) evdev: Logitech Unifying Device. Wireless PID:4007: Forcing absolute x/y axes to exist.
[    12.906] (--) evdev: Logitech Unifying Device. Wireless PID:4007: Found keys
[    12.906] (II) evdev: Logitech Unifying Device. Wireless PID:4007: Configuring as mouse
[    12.906] (II) evdev: Logitech Unifying Device. Wireless PID:4007: Configuring as keyboard
[    12.906] (II) evdev: Logitech Unifying Device. Wireless PID:4007: Adding scrollwheel support
[    12.906] (**) evdev: Logitech Unifying Device. Wireless PID:4007: YAxisMapping: buttons 4 and 5
[    12.906] (**) evdev: Logitech Unifying Device. Wireless PID:4007: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    12.906] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:4007.0006/input/input7/event4"
[    12.906] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4007" (type: KEYBOARD, id 10)
[    12.906] (**) Option "xkb_rules" "evdev"
[    12.906] (**) Option "xkb_model" "pc105"
[    12.906] (**) Option "xkb_layout" "us"
[    12.906] (II) evdev: Logitech Unifying Device. Wireless PID:4007: initialized for relative axes.
[    12.906] (WW) evdev: Logitech Unifying Device. Wireless PID:4007: ignoring absolute axes.
[    12.906] (**) Logitech Unifying Device. Wireless PID:4007: (accel) keeping acceleration scheme 1
[    12.906] (**) Logitech Unifying Device. Wireless PID:4007: (accel) acceleration profile 0
[    12.908] (**) Logitech Unifying Device. Wireless PID:4007: (accel) acceleration factor: 2.000
[    12.908] (**) Logitech Unifying Device. Wireless PID:4007: (accel) acceleration threshold: 4
[    12.908] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4007 (/dev/input/mouse1)
[    12.908] (II) No input driver specified, ignoring this device.
[    12.908] (II) This device may have been added with another device file.
[    12.909] (II) config/udev: Adding input device UVC Camera (046d:0825) (/dev/input/event5)
[    12.909] (**) UVC Camera (046d:0825): Applying InputClass "evdev keyboard catchall"
[    12.909] (II) Using input driver 'evdev' for 'UVC Camera (046d:0825)'
[    12.909] (**) UVC Camera (046d:0825): always reports core events
[    12.909] (**) evdev: UVC Camera (046d:0825): Device: "/dev/input/event5"
[    12.909] (--) evdev: UVC Camera (046d:0825): Vendor 0x46d Product 0x825
[    12.909] (--) evdev: UVC Camera (046d:0825): Found keys
[    12.909] (II) evdev: UVC Camera (046d:0825): Configuring as keyboard
[    12.909] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.4/1-1.4:1.0/input/input8/event5"
[    12.909] (II) XINPUT: Adding extended input device "UVC Camera (046d:0825)" (type: KEYBOARD, id 11)
[    12.909] (**) Option "xkb_rules" "evdev"
[    12.909] (**) Option "xkb_model" "pc105"
[    12.909] (**) Option "xkb_layout" "us"
[    12.909] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event7)
[    12.909] (II) No input driver specified, ignoring this device.
[    12.909] (II) This device may have been added with another device file.
[    12.910] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event8)
[    12.910] (II) No input driver specified, ignoring this device.
[    12.910] (II) This device may have been added with another device file.
[    12.910] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event9)
[    12.910] (II) No input driver specified, ignoring this device.
[    12.910] (II) This device may have been added with another device file.
[    12.910] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event10)
[    12.910] (II) No input driver specified, ignoring this device.
[    12.910] (II) This device may have been added with another device file.
[    12.911] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event6)
[    12.911] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    12.911] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[    12.911] (**) Dell WMI hotkeys: always reports core events
[    12.911] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event6"
[    12.911] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[    12.911] (--) evdev: Dell WMI hotkeys: Found keys
[    12.911] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[    12.911] (**) Option "config_info" "udev:/sys/devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input9/event6"
[    12.911] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 12)
[    12.911] (**) Option "xkb_rules" "evdev"
[    12.911] (**) Option "xkb_model" "pc105"
[    12.911] (**) Option "xkb_layout" "us"
[    16.000] (II) modeset(0): EDID vendor "DEL", prod id 61445
[    16.000] (II) modeset(0): Using EDID range info for horizontal sync
[    16.000] (II) modeset(0): Using EDID range info for vertical refresh
[    16.000] (II) modeset(0): Printing DDC gathered Modelines:
[    16.000] (II) modeset(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz eP)
[    16.000] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    16.000] (II) modeset(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    16.000] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    16.000] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    16.000] (II) modeset(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    16.000] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    16.000] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    16.000] (II) modeset(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    16.000] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    16.000] (II) modeset(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    16.000] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    16.000] (II) modeset(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    16.000] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    16.000] (II) modeset(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    16.000] (II) modeset(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    16.000] (II) modeset(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    16.000] (II) modeset(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    20.530] (II) modeset(0): EDID vendor "DEL", prod id 61445
[    20.530] (II) modeset(0): Using hsync ranges from config file
[    20.530] (II) modeset(0): Using vrefresh ranges from config file
[    20.530] (II) modeset(0): Printing DDC gathered Modelines:
[    20.530] (II) modeset(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz eP)
[    20.530] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    20.530] (II) modeset(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    20.530] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    20.530] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    20.530] (II) modeset(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    20.530] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    20.530] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    20.530] (II) modeset(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    20.530] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    20.530] (II) modeset(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    20.530] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    20.530] (II) modeset(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    20.530] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    20.530] (II) modeset(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    20.530] (II) modeset(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    20.530] (II) modeset(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    20.530] (II) modeset(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    23.825] (II) modeset(0): EDID vendor "DEL", prod id 61445
[    23.825] (II) modeset(0): Using hsync ranges from config file
[    23.825] (II) modeset(0): Using vrefresh ranges from config file
[    23.825] (II) modeset(0): Printing DDC gathered Modelines:
[    23.825] (II) modeset(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz eP)
[    23.825] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    23.825] (II) modeset(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    23.825] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    23.825] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    23.825] (II) modeset(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    23.825] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    23.825] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    23.825] (II) modeset(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    23.825] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    23.825] (II) modeset(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    23.825] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    23.825] (II) modeset(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    23.825] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    23.825] (II) modeset(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    23.825] (II) modeset(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    23.825] (II) modeset(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    23.825] (II) modeset(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    23.956] (II) modeset(0): EDID vendor "DEL", prod id 61445
[    23.956] (II) modeset(0): Using hsync ranges from config file
[    23.956] (II) modeset(0): Using vrefresh ranges from config file
[    23.956] (II) modeset(0): Printing DDC gathered Modelines:
[    23.956] (II) modeset(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz eP)
[    23.956] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    23.956] (II) modeset(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    23.956] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    23.956] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    23.956] (II) modeset(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    23.956] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    23.956] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    23.956] (II) modeset(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    23.956] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    23.956] (II) modeset(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    23.956] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    23.956] (II) modeset(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    23.956] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    23.956] (II) modeset(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    23.956] (II) modeset(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    23.956] (II) modeset(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    23.956] (II) modeset(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
h2-1 wrote:Or show: run: grep -E 'Loading|Unload|Failed' /var/log/Xorg.0.log which will show basically the relevant data pinxi used.
grep -E 'Loading|Unload|Failed' /var/log/Xorg.0.log

Code: Select all

[    11.963] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    12.003] (II) UnloadModule: "intel"
[    12.003] (II) Unloading intel
[    12.003] (EE) Failed to load module "intel" (module does not exist, 0)
[    12.004] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    12.005] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    12.008] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    12.013] (II) UnloadModule: "intel"
[    12.013] (II) Unloading intel
[    12.013] (EE) Failed to load module "intel" (module does not exist, 0)
[    12.013] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    12.013] (II) UnloadModule: "modesetting"
[    12.013] (II) Unloading modesetting
[    12.013] (II) Failed to load module "modesetting" (already loaded, 0)
[    12.013] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    12.013] (II) UnloadModule: "fbdev"
[    12.013] (II) Unloading fbdev
[    12.013] (II) Failed to load module "fbdev" (already loaded, 0)
[    12.013] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    12.013] (II) UnloadModule: "vesa"
[    12.013] (II) Unloading vesa
[    12.013] (II) Failed to load module "vesa" (already loaded, 0)
[    12.036] (II) Loading sub module "fbdevhw"
[    12.036] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    12.039] (II) Loading sub module "glamoregl"
[    12.039] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    12.385] (II) Loading sub module "fb"
[    12.385] (II) Loading /usr/lib/xorg/modules/libfb.so
[    12.392] (II) UnloadModule: "fbdev"
[    12.392] (II) Unloading fbdev
[    12.392] (II) UnloadSubModule: "fbdevhw"
[    12.392] (II) Unloading fbdevhw
[    12.392] (II) UnloadModule: "vesa"
[    12.392] (II) Unloading vesa
[    12.894] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
h2-1 wrote:audio usb driver is working nicely, that's good to see, that was hard to get running.
I'll bet it was, and thanks again...
h2-1 wrote:The usb networking device is failing to correctly get handled, but I know why that is, it's the last bug I have on my list, so I'll get that one fixed.
I'll be happy to test any revisions, just let me know...

...
Phd21: Mint KDE 17.3 & 18.3, 64-bit Awesome OS, Ancient Dell OptiPlex 780 Core2Duo E8400 3GHz,4gb Ram,256gb SDD, Video: Intel 4 Graphics, DVD Lightscribe. Why I use KDE?:https://opensource.com/life/15/4/9-reasons-to-use-kde

User avatar
BenTrabetere
Level 5
Level 5
Posts: 724
Joined: Sat Jul 19, 2014 12:04 am
Location: Hattiesburg, MS USA

Re: Mint Beta testers for the new inxi Perl release requested

Post by BenTrabetere » Mon Mar 19, 2018 1:29 pm

Here is output from an antique with observable personality disorders. I have included output from sudo pinxi -zv8 and sudo inxi -zv7 for comparison.
inxi version = 2.3.21-00 (2017-06-13)

The biggest discrepancy I see is the Memory line - the maximum memory capacity for the MSI-7185 (K8N SLI-F) motherboard is 4GB. The mobo has four slots and maybe a 4GB compatible DDR modules would work ... if such a creature exists. I think PC3200 modules maxed out at 1GB.
sudo pinxi -zv8

Code: Select all

$ sudo pinxi -zv8
[sudo] password for tom: 
System:    Host: TheBeast Kernel: 4.13.0-37-generic x86_64 bits: 64 compiler: gcc v: 5.4.0 Desktop: MATE 1.18.0 
           info: mate-panel dm: lightdm 1.18.3 Distro: Linux Mint 18.3 Sylvia   
Machine:   Type: Desktop System: powerspec4.1k product: ps9200 v: 1.0 serial: N/A 
           Mobo: MICRO-STAR LTD model: MS-7185 v: 1.0 serial: N/A BIOS: Phoenix LTD v: 6.00 PG date: 07/05/2005 
Memory:    Array-1: capacity: 16 GB slots: 4 EC: None max module size: 4 GB 
           Device-1: A0 size: 1 GB info: double-bank speed: Unknown type: Unknown detail: none 
           bus width: 64 bits total: 64 bits manufacturer: N/A part-nu: None serial: None 
           Device-2: A1 size: 1 GB info: double-bank speed: Unknown type: Unknown detail: none 
           bus width: 64 bits total: 64 bits manufacturer: N/A part-nu: None serial: None 
           Device-3: A2 size: 1 GB info: double-bank speed: Unknown type: Unknown detail: none 
           bus width: 64 bits total: 64 bits manufacturer: N/A part-nu: None serial: None 
           Device-4: A3 size: 1 GB info: double-bank speed: Unknown type: Unknown detail: none 
           bus width: 64 bits total: 64 bits manufacturer: N/A part-nu: None serial: None 
PCI Slots: Slot: 1 type: 32-bit PCI PCI0 status: Available length: Long 
           Slot: 2 type: 32-bit PCI PCI1 status: In Use length: Long 
           Slot: 3 type: 32-bit PCI PCI2 status: Available length: Long 
           Slot: 4 type: 32-bit PCI PCI3 status: Available length: Long 
           Slot: 5 type: 32-bit PCI PCI4 status: In Use length: Long 
CPU:       Topology: Dual Core model: AMD Athlon 64 X2 4200+ type: MCP arch: K8 rev: 1 L2 cache: 1024 KB 
           flags: lm nx pae sse sse2 sse3 bogomips: 8845 
           Speed: 2200 MHz min/max: 1000/2200 MHz Core speeds: 1: 2200 2: 2200 
Graphics:  Card-1: Advanced Micro Devices [AMD/ATI] Cedar [Radeon HD 5000/6000/7350/8350 Series] driver: radeon 
           v: kernel bus ID: 05:00.0 chip ID: 1002:68f9 
           Display Server: X.Org 1.18.4 driver: radeon,ati unloaded: fbdev,modesetting,vesa 
           resolution: 1680x1050~60Hz 
           OpenGL: renderer: AMD CEDAR (DRM 2.50.0 / 4.13.0-37-generic LLVM 5.0.0) version: 3.3 Mesa 17.2.8 
           compat-v: 3.0 direct render: Yes 
Audio:     Card-1: NVIDIA CK804 AC97 Audio Controller driver: snd_intel8x0 v: kernel bus ID: 00:04.0 
           chip ID: 10de:0059 
           Card-2: Advanced Micro Devices [AMD/ATI] Cedar HDMI Audio [Radeon HD 5400/6300 Series] 
           driver: snd_hda_intel v: kernel bus ID: 05:00.1 chip ID: 1002:aa68 
           Sound Server: ALSA v: k4.13.0-37-generic 
Network:   Message: No PCI card data found. 
           IF-ID-1: enp0s10 state: up speed: 1000 Mbps duplex: full mac: <filter> 
           IP v4: <filter> type: dynamic enp0s10 scope: global broadcast: <filter> 
           IP v6: <filter> type: temporary dynamic scope: global 
           IP v6: <filter> type: mngtmpaddr noprefixroute dynamic scope: global 
           IP v6: <filter> scope: link 
           WAN IP: <filter> 
Drives:    HDD Total Size: 2.73 TB used: 692.33 GB (24.8%) 
           ID-1: /dev/sda model: WDC_WD10EZEX-00B size: 931.51 GB serial: <filter> rev: 1A01 temp: 29 C 
           ID-2: /dev/sdb model: WDC_WD10EZEX-00B size: 931.51 GB serial: <filter> rev: 1A01 temp: 29 C 
           ID-3: /dev/sdc type: USB model: My_Passport_0820 size: 931.48 GB serial: <filter> rev: 1012 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / size: 220.96 GB used: 147.36 GB (66.7%) fs: ext4 dev: /dev/sda1 label: N/A 
           uuid: 44959a8e-9d32-4f3f-ac04-4a14d28ee0c4 
           ID-2: /mnt/Data2 size: 454.65 GB used: 67.31 GB (14.8%) fs: ext4 dev: /dev/sdb7 label: Data2 
           uuid: b589225e-53cf-459e-8f97-b9a0b4265b24 
           ID-3: /mnt/Data1 size: 454.66 GB used: 251.99 GB (55.4%) fs: ext4 dev: /dev/sdb6 label: Data1 
           uuid: 23fb102b-cf86-4257-a969-51325185c35d 
           ID-4: /Freespace size: 407.31 GB used: 71.3 MB (0.0%) fs: ext4 dev: /dev/sda5 label: N/A 
           uuid: f680960e-6335-4700-9af9-61c0e0600233 
           ID-5: /media/tom/My Passport size: 931.48 GB used: 225.61 GB (24.2%) fs: fuseblk dev: /dev/sdc1 
           label: My Passport uuid: 4E1AEA7B1AEA6007 
           ID-6: swap-1 size: 7.45 GB used: 0 KB (0.0%) fs: swap dev: /dev/sdb5 label: N/A 
           uuid: 2478d034-bbba-4299-b497-3320ac62fcfe 
Unmounted: ID-1: /dev/sda6 size: 292.97 GB fs: NTFS label: Win_Data uuid: 6EF089544B9B40C8 
USB:       Hub: 1:1 usb: 2.00 type: Full speed (or root) hub chip ID: 1d6b:0002 
           Device-1: Western Digital My Passport Ultra (WDBMWV WDBZFP) bus ID: 1:2 usb: 2.10 type: Mass Storage 
           chip ID: 1058:0820 
           Hub: 2:1 usb: 1.10 type: Full speed (or root) hub chip ID: 1d6b:0001 
           Device-2: Logitech Unifying Receiver bus ID: 2:2 usb: 2.00 type: Keyboard chip ID: 046d:c52b 
           Device-3: Alcor Micro 8-in-1 Media Card Reader bus ID: 2:3 usb: 1.10 type: Mass Storage 
           chip ID: 058f:9360 
Sensors:   System Temperatures: cpu: 48.5 C mobo: N/A gpu: radeon temp: 48 C 
           Fan Speeds (in RPM): N/A 
Repos:     No apt repos found in: /etc/apt/sources.list 
           Active apt sources in: /etc/apt/sources.list.d/dhor-myway-xenial.list 
           1: deb http://ppa.launchpad.net/dhor/myway/ubuntu xenial main
           2: deb-src http://ppa.launchpad.net/dhor/myway/ubuntu xenial main
           Active apt sources in: /etc/apt/sources.list.d/giuspen-ppa-xenial.list 
           1: deb http://ppa.launchpad.net/giuspen/ppa/ubuntu xenial main
           2: deb-src http://ppa.launchpad.net/giuspen/ppa/ubuntu xenial main
           Active apt sources in: /etc/apt/sources.list.d/google-chrome.list 
           1: deb [arch=amd64] http://dl.google.com/linux/chrome/deb/ stable main
           Active apt sources in: /etc/apt/sources.list.d/libreoffice-ppa-xenial.list 
           1: deb http://ppa.launchpad.net/libreoffice/ppa/ubuntu xenial main
           2: deb-src http://ppa.launchpad.net/libreoffice/ppa/ubuntu xenial main
           Active apt sources in: /etc/apt/sources.list.d/maarten-baert-simplescreenrecorder-xenial.list 
           1: deb http://ppa.launchpad.net/maarten-baert/simplescreenrecorder/ubuntu xenial main
           2: deb-src http://ppa.launchpad.net/maarten-baert/simplescreenrecorder/ubuntu xenial main
           Active apt sources in: /etc/apt/sources.list.d/mscore-ubuntu-mscore-stable-xenial.list 
           1: deb http://ppa.launchpad.net/mscore-ubuntu/mscore-stable/ubuntu xenial main
           2: deb-src http://ppa.launchpad.net/mscore-ubuntu/mscore-stable/ubuntu xenial main
           Active apt sources in: /etc/apt/sources.list.d/notepadqq-team-notepadqq-xenial.list 
           1: deb http://ppa.launchpad.net/notepadqq-team/notepadqq/ubuntu xenial main
           2: deb-src http://ppa.launchpad.net/notepadqq-team/notepadqq/ubuntu xenial main
           Active apt sources in: /etc/apt/sources.list.d/official-package-repositories.list 
           1: deb http://mirrors.evowise.com/linuxmint/packages sylvia main upstream import backport
           2: deb http://mirror.lstn.net/ubuntu xenial main restricted universe multiverse
           3: deb http://mirror.lstn.net/ubuntu xenial-updates main restricted universe multiverse
           4: deb http://mirror.lstn.net/ubuntu xenial-backports main restricted universe multiverse
           5: deb http://security.ubuntu.com/ubuntu/ xenial-security main restricted universe multiverse
           6: deb http://archive.canonical.com/ubuntu/ xenial partner
           No apt repos found in: /etc/apt/sources.list.d/opera-stable.list 
           Active apt sources in: /etc/apt/sources.list.d/phoerious-keepassxc-xenial.list 
           1: deb http://ppa.launchpad.net/phoerious/keepassxc/ubuntu xenial main
           2: deb-src http://ppa.launchpad.net/phoerious/keepassxc/ubuntu xenial main
           Active apt sources in: /etc/apt/sources.list.d/pmjdebruijn-darktable-release-xenial.list 
           1: deb http://ppa.launchpad.net/pmjdebruijn/darktable-release/ubuntu xenial main
           2: deb-src http://ppa.launchpad.net/pmjdebruijn/darktable-release/ubuntu xenial main
           Active apt sources in: /etc/apt/sources.list.d/teejee2008-ppa-xenial.list 
           1: deb http://ppa.launchpad.net/teejee2008/ppa/ubuntu xenial main
           2: deb-src http://ppa.launchpad.net/teejee2008/ppa/ubuntu xenial main
           Active apt sources in: /etc/apt/sources.list.d/troxor-autokey-xenial.list 
           1: deb http://ppa.launchpad.net/troxor/autokey/ubuntu xenial main
           2: deb-src http://ppa.launchpad.net/troxor/autokey/ubuntu xenial main
           Active apt sources in: /etc/apt/sources.list.d/vivaldi.list 
           1: deb http://repo.vivaldi.com/stable/deb/ stable main
           Active apt sources in: /etc/apt/sources.list.d/webupd8team-atom-xenial.list 
           1: deb http://ppa.launchpad.net/webupd8team/atom/ubuntu xenial main
           2: deb-src http://ppa.launchpad.net/webupd8team/atom/ubuntu xenial main
Processes: CPU  % used - Command - pid - Memory: MB / % used - top: 5 
           1: cpu: 49.0% 
           command: ../../projects/www.worldcommunitygrid.org/wcgrid_mcm1_map_7.41_x86_64-pc-linux-gnu 
           pid: 1897 mem: 35.4MB (0.8%) 
           2: cpu: 20.6% command: seamonkey pid: 3237 mem: 490.5MB (12.4%) 
           3: cpu: 4.0% command: sudo pid: 8620 mem: 4.93MB (0.1%) 
           4: cpu: 2.4% command: xorg pid: 1388 mem: 111.2MB (2.8%) 
           5: cpu: 0.2% command: boinc pid: 1457 mem: 15.6MB (0.3%) 
           Memory MB/% used - Command - pid - CPU: % used - top: 5 
           1: mem: 490.5 MB (20.6%) command: seamonkey pid: 3237 cpu: 12.4% 
           2: mem: 147.7 MB (0.2%) command: dropbox pid: 2845 cpu: 3.7% 
           3: mem: 111.2 MB (2.4%) command: xorg pid: 1388 cpu: 2.8% 
           4: mem: 99.6 MB (0.0%) command: shutter started by: perl pid: 2700 cpu: 2.5% 
           5: mem: 88.1 MB (0.0%) command: keepassxc pid: 2692 cpu: 2.2% 
Info:      Processes: 186 Uptime: 1:10 Memory: 3.85 GB used: 1.63 GB (42.3%) Init: systemd v: 229 runlevel: 5 
           default: 2 Compilers: gcc: 5.4.0 alt: 5 Shell: bash 4.3.48 running in: /usr/bin/termin 
           pinxi: 2.9.00-441-p 


I also see a couple of differences between pinxi -zv8 and inxi -zv7. First, inxi shows some Battery information for my wireless keyboard/mouse but pinxi does not. I do not recall inxi reporting battery information in the past, and I suspect it ‘just showed up’ with the latest update. Weirdly, pinxi -B reports “No battery data found. Is one present?”

sudo inxi -zv7

Code: Select all

$ sudo inxi -zv7
[sudo] password for tom: 
System:    Host: TheBeast Kernel: 4.13.0-37-generic x86_64 (64 bit gcc: 5.4.0)
           Desktop: MATE 1.18.0 (Gtk 3.18.9-1ubuntu3.3) info: mate-panel dm: lightdm
           Distro: Linux Mint 18.3 Sylvia
Machine:   Device: desktop System: powerspec4.1k product: ps9200 v: 1.0
           Mobo: MICRO-STAR model: MS-7185 v: 1.0 BIOS: Phoenix v: 6.00 PG date: 07/05/2005
Battery    hidpp__0: charge: N/A condition: NA/NA Wh volts: NA
           model: Logitech K520 serial: 2011-5c-7e-0d-8e status: Discharging
           hidpp__1: charge: N/A condition: NA/NA Wh volts: NA
           model: Logitech M310 serial: 1024-33-87-e0-b7 status: Discharging
CPU:       Dual core AMD Athlon 64 X2 4200+ (-MCP-) cache: 1024 KB flags: (lm nx sse sse2 sse3) bmips: 4020 
           clock speeds: min/max: 1000/2200 MHz 1: 1000 MHz 2: 1000 MHz
Memory:    Array-1 capacity: 16 GB devices: 4 EC: None max module size: 4 GB
           Device-1: A0 size: 1 GB (Double-bank) speed: N/A type: N/A
           bus width: 64 bits manufacturer: N/A part: N/A serial: N/A
           Device-2: A1 size: 1 GB (Double-bank) speed: N/A type: N/A
           bus width: 64 bits manufacturer: N/A part: N/A serial: N/A
           Device-3: A2 size: 1 GB (Double-bank) speed: N/A type: N/A
           bus width: 64 bits manufacturer: N/A part: N/A serial: N/A
           Device-4: A3 size: 1 GB (Double-bank) speed: N/A type: N/A
           bus width: 64 bits manufacturer: N/A part: N/A serial: N/A
Graphics:  Card: Advanced Micro Devices [AMD/ATI] Cedar [Radeon HD 5000/6000/7350/8350 Series]
           bus-ID: 05:00.0 chip-ID: 1002:68f9
           Display Server: X.Org 1.18.4 drivers: ati,radeon (unloaded: modesetting,fbdev,vesa)
           Resolution: 1680x1050@59.88hz
           GLX Renderer: AMD CEDAR (DRM 2.50.0 / 4.13.0-37-generic, LLVM 5.0.0)
           GLX Version: 3.3 Mesa 17.2.8 (compat-v: 3.0) Direct Rendering: Yes
Audio:     Card-1 NVIDIA CK804 AC'97 Audio Controller
           driver: snd_intel8x0 ports: ea00 ee00 bus-ID: 00:04.0 chip-ID: 10de:0059
           Card-2 Advanced Micro Devices [AMD/ATI] Cedar HDMI Audio [Radeon HD 5400/6300 Series]
           driver: snd_hda_intel bus-ID: 05:00.1 chip-ID: 1002:aa68
           Sound: Advanced Linux Sound Architecture v: k4.13.0-37-generic
Network:   Card: NVIDIA CK804 Ethernet Controller driver: forcedeth port: f000 bus-ID: 00:0a.0 chip-ID: 10de:0057
           IF: enp0s10 state: up speed: 1000 Mbps duplex: full mac: <filter>
           WAN IP: <filter>
           IF: enp0s10 ip-v4: <filter> ip-v6-link: <filter>
Drives:    HDD Total Size: 3000.6GB (25.0% used)
           ID-1: /dev/sda model: WDC_WD10EZEX size: 1000.2GB serial: WD-WCC3F6UR4L5V temp: 29C
           ID-2: /dev/sdb model: WDC_WD10EZEX size: 1000.2GB serial: WD-WCC3F6RSC2K2 temp: 29C
           ID-3: USB /dev/sdc model: My_Passport_0820 size: 1000.2GB
           serial: 57583931453934354D4A5652-0:0 temp: 0C
           Optical: No optical drives detected.
Partition: ID-1: / size: 221G used: 148G (71%) fs: ext4 dev: /dev/sda1
           label: N/A uuid: 44959a8e-9d32-4f3f-ac04-4a14d28ee0c4
           ID-2: /mnt/Data2 size: 455G used: 68G (16%) fs: ext4 dev: /dev/sdb7
           label: Data2 uuid: b589225e-53cf-459e-8f97-b9a0b4265b24
           ID-3: /mnt/Data1 size: 455G used: 252G (59%) fs: ext4 dev: /dev/sdb6
           label: Data1 uuid: 23fb102b-cf86-4257-a969-51325185c35d
           ID-4: /Freespace size: 408G used: 72M (1%) fs: ext4 dev: /dev/sda5
           label: N/A uuid: f680960e-6335-4700-9af9-61c0e0600233
           ID-5: /media/tom/My Passport size: 932G used: 226G (25%) fs: fuseblk dev: /dev/sdc1
           label: My Passport uuid: 4E1AEA7B1AEA6007
           ID-6: swap-1 size: 8.00GB used: 0.00GB (0%) fs: swap dev: /dev/sdb5
           label: N/A uuid: 2478d034-bbba-4299-b497-3320ac62fcfe
RAID:      System: supported: N/A
           No RAID devices: /proc/mdstat, md_mod kernel module present
           Unused Devices: none
Unmounted: ID-1: /dev/sda6 size: 314.57G fs: NTFS label: Win_Data uuid: 6EF089544B9B40C8
Sensors:   System Temperatures: cpu: 21.8C mobo: N/A gpu: 48.5
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 187 Uptime: 1:12 Memory: 1648.2/3946.0MB
           Init: systemd v: 229 runlevel: 5 default: 2 Gcc sys: 5.4.0
           Client: Shell (sudo running in bash) inxi: 2.3.21 
 


I suspect this is yet another idiosyncracy of this motherboard, but the CPU Core Speed output is all over the place. This has always been true for inxi, and pinxi shows the same behavior. I ran inxi -C three times, one right after another, and I got different results.

Code: Select all

 $ pinxi -C
CPU:       Topology: Dual Core model: AMD Athlon 64 X2 4200+ type: MCP L2 cache: 1024 KB 
           Speed: 1000 MHz min/max: 1000/2200 MHz Core speeds: 1: 1000 2: 1000 

$ sudo pinxi -C
[sudo] password for tom: 
CPU:       Topology: Dual Core model: AMD Athlon 64 X2 4200+ type: MCP L2 cache: 1024 KB 
           Speed: 2200 MHz min/max: 1000/2200 MHz Core speeds: 1: 2200 2: 2200 

inxi -C
CPU:       Dual core AMD Athlon 64 X2 4200+ (-MCP-) cache: 1024 KB 
           clock speeds: max: 2200 MHz 1: 2200 MHz 2: 2200 MHz           

$ inxi -C
CPU:       Dual core AMD Athlon 64 X2 4200+ (-MCP-) cache: 1024 KB 
           clock speeds: max: 2200 MHz 1: 1000 MHz 2: 1000 MHz
           
$ inxi -C
CPU:       Dual core AMD Athlon 64 X2 4200+ (-MCP-) cache: 1024 KB 
           clock speeds: max: 2200 MHz 1: 1800 MHz 2: 1800 MHz

$ inxi -Cx
CPU:       Dual core AMD Athlon 64 X2 4200+ (-MCP-) cache: 1024 KB flags: (lm nx sse sse2 sse3) bmips: 8845 
           clock speeds: max: 2200 MHz 1: 2200 MHz 2: 2200 MHz

h2-1
Level 3
Level 3
Posts: 186
Joined: Sat Oct 16, 2010 4:02 pm
Contact:

Re: Mint Beta testers for the new inxi Perl release requested

Post by h2-1 » Mon Mar 19, 2018 4:41 pm

For any updates, make sure to run pinxi -U before you post new output, it's getting lots of updates right now.

=========================

Pjotr,
I notice that the RAM report asks for root permissions (for dmidecode). This doesn't seem desirable? It seems to me, that pinxi should provide full hardware information without any root permissions....
The formula is quite simple, pinxi reports everything it can at user level. I certainly agree that it would be nice to have ram info available, but it isn't. If things were nice and orderly in the *nix system, pinxi would only be about 6 thousand lines long, literally.. But the sad fact is, things are messy. But overall inxi/pinxi does a pretty good job getting all the info it can as user, not root, so when you see that root message, you can be certain it is not possible to get that data in any other way.

I notice that the Machine Device got the id wrong, it says Oracle and it shouldn't. That's a small bug due to unexpected data.

Can you show the output of this command: systemd-detect-virt

It looks like that tool might be reporting virtualbox wrong.

=========================

thx-1138, all tools that require root have to be run as root. Users have to do specific manual configurations to have sudo permissions applied to specific application names without a password, inxi/pinxi offer that for hddtemp and file, which both also require root to run. It's just a fact that some data on your system requires root to get, that's simply how it is. /sys has opened up this a LOT, so of course, whenever the data is in /sys and I can have inxi/pinxi find it, that's always my first choice.

=========================

all41, thanks, that explains it, I've been wondering about how that can happen when the thing running your desktop is nouveau. I'm not sure if this is a bug on the xorg end, but I'll need to see many more such examples before I can be sure.

https://paste.debian.net/ if can paste your entire /var/log/Xorg.0.log there I'll see if there is something else I'm missing, which there may well be.

=========================

phd21, your example with all41's are both helpful since they are different systems, but showing the same behavior. I'm leaning towards this being an actual xorg bug, since clearly it should not be unloading a module that is already loaded, which then shows the failed message because it's already loaded. this was the missing bit of information I needed. I am not sure, but I do believe this is an actual xorg bug, and it's possible that because most people do not parse xorg log itself for data, it's gone unnoticed. Or it could be a behavior that is intended, but logically it does not make any sense.

I think I'll see if there is a more reliable way to get this data, but I never found any so far. However, pinxi now reports quite accurately the actual drivers being used per card, so the data will be there in some form, but this odd xorg logging behavior will probably require more research on my end, and maybe some inquiries directly to xorg itself.

I'll let you know when I have the usb id fixes done, but there are some cases where even when I use the enhanced usb data from lsusb -v, there simply are no identifiable terms to locate a usb networking device, which then trips the unhandled IF line starter: IF-ID-..: which I made different from the normal IF: starter specifically so I could readily identify when this failure has happened.

=========================

BenTrabetere, re max module size, in the world of total and utter garbage data, when it comes to overall champion, there are few contenders to the vendor generated values inserted into the system dmi tables, and which have NOTHING to do with the actual hardware itself, literally nothing, of memory array max capacity and max module size. Basically what pinxi does is look for logical contradictions, or a lack of that data in the first place, in either field. Once it finds empty or logically incoherent data there, it will correct the output. For example, say a syatem reports max module size of 2 gb but pinxi has found a module of 4 gb, it now knows the max module size is garbage data, because of the empirical fact that a larger module exists. Likewise, say a system reports that its capacity is 8 gB yet it has 16 gb installed. Again, pinxi will take reality over the vendor generated gibberish, I just added in a refinement as well, which is, if pinxi has either gotten or generated a max capacity number, it will further try to show the potential max capacity per slot, by dividing the max capacity by the slot count. whenever pinxi has modified reported data, it adds: note: est [or check] after the capacity number.

In your case, since you don't see the note: est after either item, this is what some lowly paid drone at MICRO-STAR pasted into those dmi fields. And for all we know, it's actually right. I always look up the board specs on a site lke http://crucial.com/ or on the original product page specs to verify this information since I know from doing inxi for years that this is garbage data.

The per slot data, on the other hand, is totally accurate, and comes from the installed memory itself, which is why pinxi always trusts that math over the junk capacity data. So if you for example see a 4gB stick in there, that's a supported capacity. Sometimes an array will have, say, a capacity of 8 gb,a max stick size of 4 gb, and 4 slots, a situation where pinxi might guess the capacity was 16 gb if there was 1 4gb stick, but it would tell you it was an est/check situation.

Network: Message: No PCI card data found.

that line is most of concern to me. Clearly there is a device since there is IF interface data. I don't see anything that could be a networking device in your --usb report, so what is the actual card there? That's a total failure to get the card data. I'd want to see the debugger data report generated with --debug 21 (or 22 if you want the generated gz data file deleted).

Either lspci -vnn is using a different term for networking or something totally new is happening.

If you can paste lspci -vnn at least if you don't want to generate the full --debug data upload that might be enough to figure out what happened there.

There's also a glitch in the 'started in: ' item in Info line, that's a clear failure. Overall I'd like to see a --debug dataset from this system because there's a lot of options it could be re what is happening there.
inxi shows some Battery information for my wireless keyboard
that was a bug that was too hard to fix in inxi. It's fixed in pinxi.

Re inxi, battery data, it did not 'just show up in a recent update', that was a few years ago, and the problem, as I've alluded to, is that Mint won't update their inxi version even though that would require literally only minutes, and once automated, less, for every mint release out there. I can't remember when 2.3.00 was released, but it was a long time ago, 56 real releases were made since then, 2.3 introduced battery data.
Weirdly, pinxi -B reports “No battery data found. Is one present?”
No weirdness, inxi was wrong, pinxi is right, there is no battery data. It only shows battery output when the -B option, or the -v options that trip -B, are used. For -F/b, for example, battery data only shows if it's there, to avoid cluttering up the output with pointless data.

So this is another case where pinxi is right, and inxi is wrong.

By the way, sudo isn't needed for most things in pinxi, just ram, slots, and some sub data like hddtemp, unmounted file system type.
CPU Core Speed output is all over the place.
pinxi is reporting the speed at the moment it hits the cpu output. To give the system a chance to reflect the actual cpu load, pinxi 'sleeps' 0.35 seconds by default right before it reads the cpu speeds. Sometimes the system 'spins down' to the state it would be in if pinxi was not running, sometimes it doesn't, but it does try. cpus run per core speeds, so there's nothing weird or unusual there, that's how your cpu works, and that's what pinxi is telling you. pinxi tries to hit all the speed data right before it starts the heavy lifting of cpu data interpretation, and it usually works ok. The new --sleep option lets you tweak this, from 0 to anything. Usually will make little difference though, modern cpus are good at adjusting themselves very rapidly to changing loads. The --sleep 0 option might result in overall higher reported cpu speeds, at least in the core or cores that are running pinxi ( believe though I'm not certain that pinxi runs on one cpu thread, though subshells it generates could well be running on another core or thread.

Thanks for the feedback, some of these issues will require a normal --debug 21 [or 22 if you prefer to clean the system of the data gz] to really get to the bottom of.

labrathor
Level 1
Level 1
Posts: 4
Joined: Fri Mar 16, 2018 6:20 pm

Re: Mint Beta testers for the new inxi Perl release requested

Post by labrathor » Mon Mar 19, 2018 5:58 pm

Hi!

Thanks for all the effort to develop inxi, as it is an excellent tool!
Here is the output of pinxi -zv8:

Code: Select all

$ pinxi -zv8
System:
  Host: lxm-655 Kernel: 4.13.0-36-generic x86_64 bits: 64 compiler: gcc 
  v: 5.4.0 Desktop: Cinnamon 3.6.7 dm: lightdm 1.18.3 
  Distro: Linux Mint 18.3 Sylvia   
Machine:
  Type: Laptop System: Hewlett-Packard product: HP 655 Notebook PC 
  v: 087F110000305B10002620110 serial: N/A Chassis: type: 10 serial: N/A 
  Mobo: Hewlett-Packard model: 1885 v: 66.34 serial: N/A UEFI: Insyde v: F.26 
  date: 05/21/2013 
Battery:
  BAT-0: charge: 35.2 Wh condition: 35.2/35.2 Wh (100%) volts: 12.5/10.8 
  model: HP type: Li-ion serial: N/A status: Full 
Memory:
  RAM Report: permissions: Unable to run dmidecode. Are you root? 
PCI Slots:
  Permissions: Unable to run dmidecode. Are you root? 
CPU:
  Topology: Dual Core model: AMD E2-1800 APU with Radeon HD Graphics type: MCP 
  arch: Bobcat L2 cache: 512 KB 
  flags: lm nx pae sse sse2 sse3 sse4a ssse3 svm bogomips: 6787 
  Speed: 975 MHz min/max: 850/1700 MHz Core speeds: 1: 975 2: 1169 
Graphics:
  Card-1: Advanced Micro Devices [AMD/ATI] Wrestler [Radeon HD 7340] 
  driver: radeon v: kernel bus ID: 00:01.0 chip ID: 1002:9808 
  Display Server: x11 (X.Org 1.18.4) driver: ati,radeon 
  unloaded: modesetting,fbdev,vesa resolution: 1366x768~60Hz 
  OpenGL: 
  renderer: Gallium 0.4 on AMD PALM (DRM 2.50.0 / 4.13.0-36-generic LLVM 3.8.0) 
  version: 3.3 Mesa 12.0.6 compat-v: 3.0 direct render: Yes 
Audio:
  Card-1: Advanced Micro Devices [AMD/ATI] Wrestler HDMI Audio 
  driver: snd_hda_intel v: kernel bus ID: 00:01.1 chip ID: 1002:1314 
  Card-2: Advanced Micro Devices [AMD] FCH Azalia Controller 
  driver: snd_hda_intel v: kernel bus ID: 00:14.2 chip ID: 1022:780d 
  Sound Server: ALSA v: k4.13.0-36-generic 
Network:
  Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller 
  driver: r8169 v: 2.3LK-NAPI port: 2000 bus ID: 03:00 chip ID: 10ec:8168 
  IF: eno1 state: down mac: <filter> 
  Card-2: Ralink RT3290 Wireless 802.11n 1T/1R PCIe driver: rt2800pci v: 2.3.0 
  bus ID: 04:00 chip ID: 1814:3290 
  IF: wlo1 state: up mac: <filter> 
  IP v4: <filter> type: dynamic wlo1 scope: global broadcast: <filter> 
  IP v6: <filter> scope: link 
  WAN IP: <filter> 
Drives:
  HDD Total Size: 465.76 GB used: 28.98 GB (6.2%) 
  ID-1: /dev/sda model: HGST_HTS545050A7 size: 465.76 GB serial: <filter> 
  rev: ACA0 
  Optical-1: /dev/sr0 vendor: hp model: DVDRAM GT80N rev: R102 dev-links: N/A 
  Features: speed: 24 multisession: yes audio: yes dvd: yes 
  rw: cd-r,cd-rw,dvd-r,dvd-ram state: running 
RAID:
  Message: No RAID data was found. 
Partition:
  ID-1: / size: 96.00 GB used: 11.15 GB (11.6%) fs: ext4 dev: /dev/sda5 
  label: N/A uuid: 83a13f1b-6f40-49db-ba9c-ec7ec49529e6 
  ID-2: /home size: 179.02 GB used: 17.83 GB (10.0%) fs: ext4 dev: /dev/sda6 
  label: N/A uuid: 86c759ce-5d08-47d0-8ece-074d1a476b8f 
  ID-3: /boot/efi size: 904.2 MB used: 3.4 MB (0.4%) fs: vfat dev: /dev/sda4 
  label: N/A uuid: 404C-F9F7 
  ID-4: swap-1 size: 3.84 GB used: 0 KB (0.0%) fs: swap dev: /dev/sda3 
  label: N/A uuid: 1d9fc755-de3f-428b-957c-01a9905cfe51 
Unmounted:
  ID-1: /dev/sda1 size: 88.47 GB fs: ext4 label: N/A 
  uuid: 44ce1f74-7b43-496d-b437-00011f174bf7 
  ID-2: /dev/sda2 size: 92.89 GB fs: ext4 label: N/A 
  uuid: 0e4eeb9c-a5c4-4276-880c-2eb840b0601f 
USB:
  Hub: 1:1 usb: 2.00 type: Full speed (or root) hub chip ID: 1d6b:0002 
  Device-1: Suyin bus ID: 1:2 usb: 2.00 type: Video chip ID: 064e:e263 
  Hub: 2:1 usb: 2.00 type: Full speed (or root) hub chip ID: 1d6b:0002 
  Hub: 3:1 usb: 1.10 type: Full speed (or root) hub chip ID: 1d6b:0001 
  Hub: 4:1 usb: 1.10 type: Full speed (or root) hub chip ID: 1d6b:0001 
Sensors:
  System Temperatures: cpu: 60.0 C mobo: N/A gpu: radeon temp: 61 C 
  Fan Speeds (in RPM): N/A 
Repos:
  No apt repos found in: /etc/apt/sources.list 
  Active apt sources in: /etc/apt/sources.list.d/google-chrome.list 
  1: deb [arch=amd64] http://dl.google.com/linux/chrome/deb/ stable main
  Active apt sources in: /etc/apt/sources.list.d/official-package-repositories.list 
  1: deb http://ftp.acc.umu.se/mirror/linuxmint.com/packages sylvia main upstream import backport
  2: deb http://ubuntu.trumpetti.atm.tut.fi/ubuntu xenial main restricted universe multiverse
  3: deb http://ubuntu.trumpetti.atm.tut.fi/ubuntu xenial-updates main restricted universe multiverse
  4: deb http://ubuntu.trumpetti.atm.tut.fi/ubuntu xenial-backports main restricted universe multiverse
  5: deb http://security.ubuntu.com/ubuntu/ xenial-security main restricted universe multiverse
  6: deb http://archive.canonical.com/ubuntu/ xenial partner
  Active apt sources in: /etc/apt/sources.list.d/overcoder-hexchat-xenial.list 
  1: deb http://ppa.launchpad.net/overcoder/hexchat/ubuntu xenial main
  2: deb-src http://ppa.launchpad.net/overcoder/hexchat/ubuntu xenial main
  Active apt sources in: /etc/apt/sources.list.d/skype-stable.list 
  1: deb [arch=amd64] https://repo.skype.com/deb stable main
  Active apt sources in: /etc/apt/sources.list.d/spotify.list 
  1: deb http://repository.spotify.com stable non-free
Processes:
  CPU  % used - Command - pid - Memory: MB / % used - top: 5 
  1: cpu: 7.2% command: chrome pid: 31862 mem: 202.3MB (5.7%) 
  2: cpu: 5.8% command: chrome pid: 9387 mem: 154.1MB (4.3%) 
  3: cpu: 2.8% command: chrome pid: 8265 mem: 152.8MB (4.3%) 
  4: cpu: 2.5% command: cinnamon pid: 1832 mem: 262.4MB (7.4%) 
  5: cpu: 1.1% command: xorg pid: 1082 mem: 51.4MB (1.4%) 
  Memory MB/% used - Command - pid - CPU: % used - top: 5 
  1: mem: 262.4 MB (2.5%) command: cinnamon pid: 1832 cpu: 7.4% 
  2: mem: 202.3 MB (7.2%) command: chrome pid: 31862 cpu: 5.7% 
  3: mem: 170.3 MB (0.8%) command: 109d4a44-2720-4947-aaf1-863522e80b4f 
  started by: nemo pid: 2080 cpu: 4.8% 
  4: mem: 154.1 MB (5.8%) command: chrome pid: 9387 cpu: 4.3% 
  5: mem: 152.8 MB (2.8%) command: chrome pid: 8265 cpu: 4.3% 
Info:
  Processes: 179 Uptime: 3 days Memory: 3.46 GB used: 1.39 GB (40.2%) 
  Init: systemd v: 229 runlevel: 5 default: 2 Compilers: gcc: 5.4.0 alt: 5 
  Shell: bash 4.3.48 running in: gnome-terminal- pinxi: 2.9.00-452-p
And here is sudo pinxi -zv8

Code: Select all

$ sudo pinxi -zv8
System:
  Host: lxm-655 Kernel: 4.13.0-36-generic x86_64 bits: 64 compiler: gcc 
  v: 5.4.0 Desktop: Cinnamon 3.6.7 dm: lightdm 1.18.3 
  Distro: Linux Mint 18.3 Sylvia   
Machine:
  Type: Laptop System: Hewlett-Packard product: HP 655 Notebook PC 
  v: 087F110000305B10002620110 serial: <filter> Chassis: type: 10 serial: N/A 
  Mobo: Hewlett-Packard model: 1885 v: 66.34 serial: <filter> UEFI: Insyde 
  v: F.26 date: 05/21/2013 
Battery:
  BAT-0: charge: 35.2 Wh condition: 35.2/35.2 Wh (100%) volts: 12.5/10.8 
  model: HP type: Li-ion serial: N/A status: Full 
Memory:
  Array-1: capacity: 4 GB slots: 2 EC: None max module size: 4 GB note: est 
  Device-1: Bottom-Slot 1(top) size: No Module Installed 
  Device-2: Bottom-Slot 2(under) size: 4 GB speed: 1333 MHz type: DDR3 
  detail: synchronous unbuffered (unregistered) bus width: 64 bits 
  total: 64 bits manufacturer: A-DATA Technology part-nu: AM1U16BC4P2-B19H 
  serial: 0001F24C 
PCI Slots:
  Slot: 1 type: x16 PCI Express x16 J6C1 status: Available length: Long 
  Slot: 2 type: x1 PCI Express x1 J8C1 status: Available length: Short 
  Slot: 3 type: x1 PCI Express x1 J7C1 status: Available length: Short 
  Slot: 4 type: x1 PCI Express x1 J8D1 status: Available length: Short 
  Slot: 5 type: 32-bit PCI J8B1 status: Available length: Long 
CPU:
  Topology: Dual Core model: AMD E2-1800 APU with Radeon HD Graphics type: MCP 
  arch: Bobcat L2 cache: 512 KB 
  flags: lm nx pae sse sse2 sse3 sse4a ssse3 svm bogomips: 6787 
  Speed: 851 MHz min/max: 850/1700 MHz Core speeds: 1: 851 2: 857 
Graphics:
  Card-1: Advanced Micro Devices [AMD/ATI] Wrestler [Radeon HD 7340] 
  driver: radeon v: kernel bus ID: 00:01.0 chip ID: 1002:9808 
  Display Server: X.Org 1.18.4 driver: radeon,ati 
  unloaded: modesetting,fbdev,vesa resolution: 1366x768~60Hz 
  OpenGL: 
  renderer: Gallium 0.4 on AMD PALM (DRM 2.50.0 / 4.13.0-36-generic LLVM 3.8.0) 
  version: 3.3 Mesa 12.0.6 compat-v: 3.0 direct render: Yes 
Audio:
  Card-1: Advanced Micro Devices [AMD/ATI] Wrestler HDMI Audio 
  driver: snd_hda_intel v: kernel bus ID: 00:01.1 chip ID: 1002:1314 
  Card-2: Advanced Micro Devices [AMD] FCH Azalia Controller 
  driver: snd_hda_intel v: kernel bus ID: 00:14.2 chip ID: 1022:780d 
  Sound Server: ALSA v: k4.13.0-36-generic 
Network:
  Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller 
  driver: r8169 v: 2.3LK-NAPI port: 2000 bus ID: 03:00 chip ID: 10ec:8168 
  IF: eno1 state: down mac: <filter> 
  Card-2: Ralink RT3290 Wireless 802.11n 1T/1R PCIe driver: rt2800pci v: 2.3.0 
  bus ID: 04:00 chip ID: 1814:3290 
  IF: wlo1 state: up mac: <filter> 
  IP v4: <filter> type: dynamic wlo1 scope: global broadcast: <filter> 
  IP v6: <filter> scope: link 
  WAN IP: <filter> 
Drives:
  HDD Total Size: 465.76 GB used: 28.98 GB (6.2%) 
  ID-1: /dev/sda model: HGST_HTS545050A7 size: 465.76 GB serial: <filter> 
  rev: ACA0 
  Optical-1: /dev/sr0 vendor: hp model: DVDRAM GT80N rev: R102 dev-links: N/A 
  Features: speed: 24 multisession: yes audio: yes dvd: yes 
  rw: cd-r,cd-rw,dvd-r,dvd-ram state: running 
RAID:
  Message: No RAID data was found. 
Partition:
  ID-1: / size: 96.00 GB used: 11.15 GB (11.6%) fs: ext4 dev: /dev/sda5 
  label: N/A uuid: 83a13f1b-6f40-49db-ba9c-ec7ec49529e6 
  ID-2: /home size: 179.02 GB used: 17.83 GB (10.0%) fs: ext4 dev: /dev/sda6 
  label: N/A uuid: 86c759ce-5d08-47d0-8ece-074d1a476b8f 
  ID-3: /boot/efi size: 904.2 MB used: 3.4 MB (0.4%) fs: vfat dev: /dev/sda4 
  label: N/A uuid: 404C-F9F7 
  ID-4: swap-1 size: 3.84 GB used: 0 KB (0.0%) fs: swap dev: /dev/sda3 
  label: N/A uuid: 1d9fc755-de3f-428b-957c-01a9905cfe51 
Unmounted:
  ID-1: /dev/sda1 size: 88.47 GB fs: ext4 label: N/A 
  uuid: 44ce1f74-7b43-496d-b437-00011f174bf7 
  ID-2: /dev/sda2 size: 92.89 GB fs: ext4 label: N/A 
  uuid: 0e4eeb9c-a5c4-4276-880c-2eb840b0601f 
USB:
  Hub: 1:1 usb: 2.00 type: Full speed (or root) hub chip ID: 1d6b:0002 
  Device-1: Suyin bus ID: 1:2 usb: 2.00 type: Video chip ID: 064e:e263 
  Hub: 2:1 usb: 2.00 type: Full speed (or root) hub chip ID: 1d6b:0002 
  Hub: 3:1 usb: 1.10 type: Full speed (or root) hub chip ID: 1d6b:0001 
  Hub: 4:1 usb: 1.10 type: Full speed (or root) hub chip ID: 1d6b:0001 
Sensors:
  System Temperatures: cpu: 61.0 C mobo: N/A gpu: radeon temp: 61 C 
  Fan Speeds (in RPM): N/A 
Repos:
  No apt repos found in: /etc/apt/sources.list 
  Active apt sources in: /etc/apt/sources.list.d/google-chrome.list 
  1: deb [arch=amd64] http://dl.google.com/linux/chrome/deb/ stable main
  Active apt sources in: /etc/apt/sources.list.d/official-package-repositories.list 
  1: deb http://ftp.acc.umu.se/mirror/linuxmint.com/packages sylvia main upstream import backport
  2: deb http://ubuntu.trumpetti.atm.tut.fi/ubuntu xenial main restricted universe multiverse
  3: deb http://ubuntu.trumpetti.atm.tut.fi/ubuntu xenial-updates main restricted universe multiverse
  4: deb http://ubuntu.trumpetti.atm.tut.fi/ubuntu xenial-backports main restricted universe multiverse
  5: deb http://security.ubuntu.com/ubuntu/ xenial-security main restricted universe multiverse
  6: deb http://archive.canonical.com/ubuntu/ xenial partner
  Active apt sources in: /etc/apt/sources.list.d/overcoder-hexchat-xenial.list 
  1: deb http://ppa.launchpad.net/overcoder/hexchat/ubuntu xenial main
  2: deb-src http://ppa.launchpad.net/overcoder/hexchat/ubuntu xenial main
  Active apt sources in: /etc/apt/sources.list.d/skype-stable.list 
  1: deb [arch=amd64] https://repo.skype.com/deb stable main
  Active apt sources in: /etc/apt/sources.list.d/spotify.list 
  1: deb http://repository.spotify.com stable non-free
Processes:
  CPU  % used - Command - pid - Memory: MB / % used - top: 5 
  1: cpu: 39.0% command: pinxi started by: perl pid: 11893 mem: 20.3MB (0.5%) 
  2: cpu: 20.9% command: chrome pid: 11729 mem: 127.6MB (3.6%) 
  3: cpu: 7.4% command: chrome pid: 31862 mem: 206.2MB (5.8%) 
  4: cpu: 7.1% command: chrome pid: 9387 mem: 165.6MB (4.6%) 
  5: cpu: 5.1% command: chrome pid: 11715 mem: 128.5MB (3.6%) 
  Memory MB/% used - Command - pid - CPU: % used - top: 5 
  1: mem: 262.5 MB (2.5%) command: cinnamon pid: 1832 cpu: 7.4% 
  2: mem: 206.2 MB (7.4%) command: chrome pid: 31862 cpu: 5.8% 
  3: mem: 170.4 MB (0.8%) command: 109d4a44-2720-4947-aaf1-863522e80b4f 
  started by: nemo pid: 2080 cpu: 4.8% 
  4: mem: 165.6 MB (7.1%) command: chrome pid: 9387 cpu: 4.6% 
  5: mem: 128.5 MB (5.1%) command: chrome pid: 11715 cpu: 3.6% 
Info:
  Processes: 180 Uptime: 3 days Memory: 3.46 GB used: 1.44 GB (41.8%) 
  Init: systemd v: 229 runlevel: 5 default: 2 Compilers: gcc: 5.4.0 alt: 5 
  Shell: bash 4.3.48 running in: gnome-terminal- pinxi: 2.9.00-452-p
Last edited by labrathor on Mon Mar 19, 2018 6:30 pm, edited 1 time in total.

User avatar
all41
Level 13
Level 13
Posts: 4637
Joined: Tue Dec 31, 2013 9:12 am
Location: Computer, Car, Cage

Re: Mint Beta testers for the new inxi Perl release requested

Post by all41 » Mon Mar 19, 2018 6:19 pm

Here is another one.

Code: Select all

sudo pinxi -zv8

uno@experimental ~ $ sudo pinxi -zv8
[sudo] password for uno: 
System:
  Host: experimental Kernel: 4.13.0-37-generic x86_64 bits: 64 compiler: gcc 
  v: 5.4.0 Desktop: MATE 1.18.0 info: mate-panel dm: lightdm 1.18.3 
  Distro: Linux Mint 18.3 Sylvia   
Machine:
  Type: Desktop System: HP-Pavilion product: GX613AA-ABA a6300f v: N/A 
  serial: <filter> Chassis: Hewlett-Packard type: 3 serial: N/A 
  Mobo: FOXCONN model: Napa v: HP P/N serial: <filter> BIOS: Phoenix LTD 
  v: 5.07 date: 12/14/2007 
Memory:
  Array-1: capacity: 4 GB note: est slots: 2 EC: None max module size: 2 GB 
  Device-1: A0 size: 1 GB info: single-bank speed: 667 MHz type: DDR2 
  detail: none bus width: 64 bits total: 64 bits 
  manufacturer: AD00000000000000 part-nu: HYMP112U64CP8-Y5 serial: None 
  Device-2: A2 size: 1 GB info: single-bank speed: 667 MHz type: DDR2 
  detail: none bus width: 64 bits total: 64 bits 
  manufacturer: AD00000000000000 part-nu: HYMP112U64CP8-Y5 serial: None 
PCI Slots:
  Slot: 1 type: 32-bit PCI PCI1 status: Available length: Long 
  Slot: 3 type: x16 PCI Express PCIE X16 SLOT status: Available 
  length: Other 
  Slot: 4 type: x1 PCI Express PCIE X1 SLOT status: Available length: Other 
  Slot: 5 type: x1 PCI Express PCIE X1 SLOT status: Available length: Other 
CPU:
  Topology: Dual Core model: Intel Pentium Dual E2180 type: MCP arch: Conroe 
  rev: 13 L2 cache: 1024 KB 
  flags: lm nx pae sse sse2 sse3 ssse3 bogomips: 8000 
  Speed: 1201 MHz min/max: 1200/2000 MHz Core speeds: 1: 1201 2: 1200 
Graphics:
  Card-1: NVIDIA C73 [GeForce 7100 / nForce 630i] driver: nouveau v: kernel 
  bus ID: 00:10.0 chip ID: 10de:07e1 
  Display Server: X.Org 1.18.4 driver: none 
  unloaded: nouveau,fbdev,nvidia,vesa,modesetting resolution: 1680x1050~60Hz 
  OpenGL: renderer: NV63 version: 2.1 Mesa 17.2.8 direct render: Yes 
Audio:
  Card-1: NVIDIA MCP73 High Definition Audio driver: snd_hda_intel v: kernel 
  bus ID: 00:09.0 chip ID: 10de:07fc 
  Sound Server: ALSA v: k4.13.0-37-generic 
Network:
  Card-1: NVIDIA MCP73 Ethernet driver: forcedeth v: kernel port: f600 
  bus ID: 00:0f chip ID: 10de:07dc 
  IF: enp0s15 state: up speed: 100 Mbps duplex: full mac: <filter> 
  IP v4: <filter> type: dynamic enp0s15 scope: global broadcast: <filter> 
  IP v6: <filter> scope: link 
  WAN IP: <filter> 
Drives:
  HDD Total Size: 177.65 GB used: 26.15 GB (14.7%) 
  ID-1: /dev/sda model: WDC_WD1600HLFS-7 size: 149.01 GB serial: <filter> 
  rev: 4V04 temp: 23 C 
  ID-2: /dev/sdf type: USB model: Ultra size: 28.64 GB serial: <filter> 
  rev: 1.00 
  Optical-1: /dev/sr0 vendor: ATAPI model: iHES208 2 rev: 8L0C 
  dev-links: cdrom,cdrw,dvd,dvdrw 
  Features: speed: 48 multisession: yes audio: yes dvd: yes 
  rw: cd-r,cd-rw,dvd-r,dvd-ram state: running 
RAID:
  Message: No RAID data was found. 
Partition:
  ID-1: / size: 36.80 GB used: 7.85 GB (21.3%) fs: ext4 dev: /dev/sda5 
  label: N/A uuid: ab25b066-678c-46e0-812a-6cb0139ceb49 
  ID-2: /media/uno/3CEAF6937F843F2B size: 28.64 GB used: 18.30 GB (63.9%) 
  fs: fuseblk dev: /dev/sdf1 label: N/A uuid: 3CEAF6937F843F2B 
  ID-3: swap-1 size: 3.87 GB used: 0 KB (0.0%) fs: swap dev: /dev/sda6 
  label: N/A uuid: 80bf98ff-4cd4-4c63-bcac-80d4ecf3f999 
Unmounted:
  ID-1: /dev/sda1 size: 1.49 GB fs: NTFS label: SYSTEM_DRV 
  uuid: DCCE4C4FCE4C23DC 
  ID-2: /dev/sda2 size: 95.90 GB fs: NTFS label: Windows7_OS 
  uuid: BE9A534F9A5302F7 
  ID-3: /dev/sda3 size: 10.23 GB fs: NTFS label: Lenovo_Recovery 
  uuid: 8A48CC7948CC6613 
USB:
  Hub: 1:1 usb: 2.00 type: Full speed (or root) hub chip ID: 1d6b:0002 
  Device-1: Alcor Micro AU6375 4-LUN card reader bus ID: 1:4 usb: 2.00 
  type: Mass Storage chip ID: 058f:6377 
  Device-2: SanDisk Ultra bus ID: 1:5 usb: 2.10 type: Mass Storage 
  chip ID: 0781:5581 
  Hub: 2:1 usb: 1.10 type: Full speed (or root) hub chip ID: 1d6b:0001 
  Device-3: Dell RT7D50 Keyboard bus ID: 2:2 usb: 1.10 type: Keyboard 
  chip ID: 413c:2005 
  Device-4: Logitech Unifying Receiver bus ID: 2:3 usb: 2.00 type: Keyboard 
  chip ID: 046d:c52b 
Sensors:
  System Temperatures: cpu: 40.0 C mobo: N/A 
  Fan Speeds (in RPM): N/A 
Repos:
  No apt repos found in: /etc/apt/sources.list 
  Active apt sources in: /etc/apt/sources.list.d/official-package-repositories.list 
  1: deb http://packages.linuxmint.com sylvia main upstream import backport
  2: deb http://mirror.us.leaseweb.net/ubuntu xenial main restricted universe multiverse
  3: deb http://mirror.us.leaseweb.net/ubuntu xenial-updates main restricted universe multiverse
  4: deb http://mirror.us.leaseweb.net/ubuntu xenial-backports main restricted universe multiverse
  5: deb http://security.ubuntu.com/ubuntu/ xenial-security main restricted universe multiverse
  6: deb http://archive.canonical.com/ubuntu/ xenial partner
Processes:
  CPU  % used - Command - pid - Memory: MB / % used - top: 5 
  1: cpu: 1.6% command: pinxi started by: xed pid: 2698 mem: 50.6MB (2.7%) 
  2: cpu: 1.4% command: xorg pid: 1026 mem: 53.2MB (2.8%) 
  3: cpu: 1.4% command: mate-terminal pid: 2861 mem: 34.7MB (1.8%) 
  4: cpu: 0.9% command: caja pid: 1534 mem: 73.8MB (3.9%) 
  5: cpu: 0.6% command: init pid: 1 mem: 6.05MB (0.3%) 
  Memory MB/% used - Command - pid - CPU: % used - top: 5 
  1: mem: 73.8 MB (0.9%) command: caja pid: 1534 cpu: 3.9% 
  2: mem: 53.6 MB (0.3%) command: mintupdate pid: 2087 cpu: 2.8% 
  3: mem: 53.2 MB (1.4%) command: xorg pid: 1026 cpu: 2.8% 
  4: mem: 52.7 MB (0.4%) command: mintmenu pid: 1537 cpu: 2.8% 
  5: mem: 50.6 MB (1.6%) command: pinxi started by: xed pid: 2698 cpu: 2.7% 
Info:
  Processes: 149 Uptime: 6 min Memory: 1.82 GB used: 353.0 MB (18.9%) 
  Init: systemd v: 229 runlevel: 5 default: 2 Compilers: gcc: 5.4.0 alt: 5 
  Shell: bash 4.3.48 running in: mate-terminal pinxi: 2.9.00-452-p 
uno@experimental ~ $ 
Proud to be a supporter and monthly contributor to Mint.

h2-1
Level 3
Level 3
Posts: 186
Joined: Sat Oct 16, 2010 4:02 pm
Contact:

Re: Mint Beta testers for the new inxi Perl release requested

Post by h2-1 » Mon Mar 19, 2018 6:28 pm

labrathor, great stuff.

I'm particularly pleased to see the new estimate tool for max ram module size is working well.

Code: Select all

Memory:
  Array-1: capacity: 4 GB slots: 2 EC: None max module size: 4 GB note: est 
  Device-1: Bottom-Slot 1(top) size: No Module Installed 
  Device-2: Bottom-Slot 2(under) size: 4 GB speed: 1333 MHz type: DDR3 
  detail: synchronous unbuffered (unregistered) bus width: 64 bits 
  total: 64 bits manufacturer: A-DATA Technology part-nu: AM1U16BC4P2-B19H 
  serial: 0001F24C
This is an example of what I was explaining above. I don't know if the system reported a false max module size, or didn't get one. Whatever the case, pinxi generated it, correctly, based on the fact a 4GB module is actually there, so it's clearly the max size. Because it generated this dynamically, it adds the note: est item to let you know this was created by pinxi.

I don't see any errors there, which is good. I'm glad to see the cinnamon detection working well, those are slightly tricky.

h2-1
Level 3
Level 3
Posts: 186
Joined: Sat Oct 16, 2010 4:02 pm
Contact:

Re: Mint Beta testers for the new inxi Perl release requested

Post by h2-1 » Tue Mar 20, 2018 12:53 am

pinxi will replace inxi as version 2.9.01 tomorrow barring any last minute bugs.

I really liked the pinxi branch, so I'm keeping that active for all future perl inxi dev work, that worked out super well.

thanks for the great issues and examples, found lots of big and small things to fix.

After tomorrow, inxi will the active branch of Perl inxi, so issues should be filed on github against the master branch once it's perl inxi, not pinxi. But pinxi will keep working, and will get updates when I do bigger dev stuff. If you see bugs or issues on pinxi, those will probably be in inxi as well, so feel free to report them if you find them.

User avatar
BenTrabetere
Level 5
Level 5
Posts: 724
Joined: Sat Jul 19, 2014 12:04 am
Location: Hattiesburg, MS USA

Re: Mint Beta testers for the new inxi Perl release requested

Post by BenTrabetere » Tue Mar 20, 2018 2:24 am

h2-1 wrote:
Mon Mar 19, 2018 4:41 pm
BenTrabetere, re max module size, in the world of total and utter garbage data, when it comes to overall champion, there are few contenders to the vendor generated values
This explains a lot. Sadly, this behavior is NOT limited to the computer industry. :evil:
Network: Message: No PCI card data found.

that line is most of concern to me. Clearly there is a device since there is IF interface data. I don't see anything that could be a networking device in your --usb report, so what is the actual card there?

I am almost positive it is an onboard Marvell PHY 88E1111 Gigabit Ethernet chip.
That's a total failure to get the card data. I'd want to see the debugger data report generated with --debug 21 (or 22 if you want the generated gz data file deleted).
Done. Three times, because I am an idiot with too many open terminals.
Either lspci -vnn is using a different term for networking or something totally new is happening.

If you can paste lspci -vnn at least if you don't want to generate the full --debug data upload that might be enough to figure out what happened there.

Code: Select all

$ lspci -vnn
00:00.0 Memory controller [0580]: NVIDIA Corporation CK804 Memory Controller [10de:005e] (rev a3)
	Subsystem: Micro-Star International Co., Ltd. [MSI] CK804 Memory Controller [1462:7185]
	Flags: bus master, 66MHz, fast devsel, latency 0
	Capabilities: <access denied>

00:01.0 ISA bridge [0601]: NVIDIA Corporation CK804 ISA Bridge [10de:0050] (rev a3)
	Subsystem: Micro-Star International Co., Ltd. [MSI] CK804 ISA Bridge [1462:7185]
	Flags: bus master, 66MHz, fast devsel, latency 0

00:01.1 SMBus [0c05]: NVIDIA Corporation CK804 SMBus [10de:0052] (rev a2)
	Subsystem: Micro-Star International Co., Ltd. [MSI] CK804 SMBus [1462:7185]
	Flags: 66MHz, fast devsel, IRQ 5
	I/O ports at ff00 [size=32]
	I/O ports at 0400 [size=64]
	I/O ports at 0440 [size=64]
	Capabilities: <access denied>
	Kernel driver in use: nForce2_smbus
	Kernel modules: i2c_nforce2

00:02.0 USB controller [0c03]: NVIDIA Corporation CK804 USB Controller [10de:005a] (rev a2) (prog-if 10 [OHCI])
	Subsystem: Micro-Star International Co., Ltd. [MSI] CK804 USB Controller [1462:7185]
	Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
	Memory at febff000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci-pci

00:02.1 USB controller [0c03]: NVIDIA Corporation CK804 USB Controller [10de:005b] (rev a3) (prog-if 20 [EHCI])
	Subsystem: Micro-Star International Co., Ltd. [MSI] CK804 USB Controller [1462:7185]
	Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
	Memory at feb00000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

00:04.0 Multimedia audio controller [0401]: NVIDIA Corporation CK804 AC'97 Audio Controller [10de:0059] (rev a2)
	Subsystem: Micro-Star International Co., Ltd. [MSI] CK804 AC'97 Audio Controller [1462:7185]
	Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
	I/O ports at ea00 [size=256]
	I/O ports at ee00 [size=256]
	Memory at febfd000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: snd_intel8x0
	Kernel modules: snd_intel8x0

00:06.0 IDE interface [0101]: NVIDIA Corporation CK804 IDE [10de:0053] (rev f2) (prog-if 8a [Master SecP PriP])
	Subsystem: Micro-Star International Co., Ltd. [MSI] CK804 IDE [1462:7185]
	Flags: bus master, 66MHz, fast devsel, latency 0
	[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
	[virtual] Memory at 000003f0 (type 3, non-prefetchable)
	[virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
	[virtual] Memory at 00000370 (type 3, non-prefetchable)
	I/O ports at fb00 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: pata_amd
	Kernel modules: pata_amd, pata_acpi

00:07.0 IDE interface [0101]: NVIDIA Corporation CK804 Serial ATA Controller [10de:0054] (rev f3) (prog-if 85 [Master SecO PriO])
	Subsystem: Micro-Star International Co., Ltd. [MSI] CK804 Serial ATA Controller [1462:7185]
	Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
	I/O ports at 09f0 [size=8]
	I/O ports at 0bf0 [size=4]
	I/O ports at 0970 [size=8]
	I/O ports at 0b70 [size=4]
	I/O ports at f600 [size=16]
	Memory at febfb000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: sata_nv
	Kernel modules: sata_nv, pata_acpi

00:08.0 IDE interface [0101]: NVIDIA Corporation CK804 Serial ATA Controller [10de:0055] (rev f3) (prog-if 85 [Master SecO PriO])
	Subsystem: Micro-Star International Co., Ltd. [MSI] CK804 Serial ATA Controller [1462:7185]
	Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
	I/O ports at 09e0 [size=8]
	I/O ports at 0be0 [size=4]
	I/O ports at 0960 [size=8]
	I/O ports at 0b60 [size=4]
	I/O ports at f100 [size=16]
	Memory at febfa000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: sata_nv
	Kernel modules: sata_nv, pata_acpi

00:09.0 PCI bridge [0604]: NVIDIA Corporation CK804 PCI Bridge [10de:005c] (rev a2) (prog-if 01 [Subtractive decode])
	Flags: bus master, 66MHz, fast devsel, latency 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: fe900000-fe9fffff
	Prefetchable memory behind bridge: fea00000-feafffff

00:0a.0 Bridge [0680]: NVIDIA Corporation CK804 Ethernet Controller [10de:0057] (rev a3)
	Subsystem: Micro-Star International Co., Ltd. [MSI] CK804 Ethernet Controller [1462:7185]
	Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
	Memory at febf9000 (32-bit, non-prefetchable) [size=4K]
	I/O ports at f000 [size=8]
	Capabilities: <access denied>
	Kernel driver in use: forcedeth
	Kernel modules: forcedeth

00:0b.0 PCI bridge [0604]: NVIDIA Corporation CK804 PCIE Bridge [10de:005d] (rev a3) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: fe800000-fe8fffff
	Prefetchable memory behind bridge: 00000000fe700000-00000000fe7fffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:0c.0 PCI bridge [0604]: NVIDIA Corporation CK804 PCIE Bridge [10de:005d] (rev a3) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000b000-0000bfff
	Memory behind bridge: fe600000-fe6fffff
	Prefetchable memory behind bridge: 00000000fe500000-00000000fe5fffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:0d.0 PCI bridge [0604]: NVIDIA Corporation CK804 PCIE Bridge [10de:005d] (rev a3) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 0000a000-0000afff
	Memory behind bridge: fe400000-fe4fffff
	Prefetchable memory behind bridge: 00000000fe300000-00000000fe3fffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:0e.0 PCI bridge [0604]: NVIDIA Corporation CK804 PCIE Bridge [10de:005d] (rev a3) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
	I/O behind bridge: 00009000-00009fff
	Memory behind bridge: fe200000-fe2fffff
	Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
	Flags: fast devsel
	Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
	Flags: fast devsel

00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
	Flags: fast devsel

00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
	Flags: fast devsel
	Kernel driver in use: k8temp
	Kernel modules: k8temp

01:07.0 Communication controller [0780]: LSI Corporation LT WinModem [11c1:044c] (rev 02)
	Subsystem: LSI Corporation LT WinModem [11c1:044c]
	Flags: bus master, medium devsel, latency 32, IRQ 3
	Memory at fe9ff000 (32-bit, non-prefetchable) [size=256]
	I/O ports at df00 [size=8]
	I/O ports at dc00 [size=256]
	Capabilities: <access denied>

01:0c.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev 80) (prog-if 10 [OHCI])
	Subsystem: Device [0574:086c]
	Flags: bus master, stepping, medium devsel, latency 32, IRQ 19
	Memory at fe9fe000 (32-bit, non-prefetchable) [size=2K]
	I/O ports at de00 [size=128]
	Capabilities: <access denied>
	Kernel driver in use: firewire_ohci
	Kernel modules: firewire_ohci

05:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Cedar [Radeon HD 5000/6000/7350/8350 Series] [1002:68f9] (prog-if 00 [VGA controller])
	Subsystem: XFX Pine Group Inc. Cedar [Radeon HD 5000/6000/7350/8350 Series] [1682:5220]
	Flags: bus master, fast devsel, latency 0, IRQ 24
	Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Memory at fe2c0000 (64-bit, non-prefetchable) [size=128K]
	I/O ports at 9e00 [size=256]
	[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: radeon
	Kernel modules: radeon

05:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Cedar HDMI Audio [Radeon HD 5400/6300 Series] [1002:aa68]
	Subsystem: XFX Pine Group Inc. Cedar HDMI Audio [Radeon HD 5400/6300 Series] [1682:aa68]
	Flags: bus master, fast devsel, latency 0, IRQ 25
	Memory at fe2fc000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
I hope all of this is useful.

h2-1
Level 3
Level 3
Posts: 186
Joined: Sat Oct 16, 2010 4:02 pm
Contact:

Re: Mint Beta testers for the new inxi Perl release requested

Post by h2-1 » Tue Mar 20, 2018 2:34 am

thanks for the data, I'll check it out. But your lspci shows no networking device, sometimes firewire was used for some forms of networking but you'd know if that was the case.

I've never seen a nic not show up on the pcibus, but that's how it goes... I've used marvell nics before, onboard, but they showed as part of the pci bus data along with everything else. ARM devices of course don't have pci data, so they never show that stuff, but I've never seen that on a desktop regular intel/amd type. I've seen some SOC type devices, amd, that had no pci devices except nics.

If anyone has a USB networking device, can you update to latest pinxi, then show: pinxi -zixxx

I'm trying to confirm a fix I tried is working.

thanks

User avatar
powerwagon75
Level 3
Level 3
Posts: 168
Joined: Sun Feb 28, 2016 4:05 pm
Location: USA

Re: Mint Beta testers for the new inxi Perl release requested

Post by powerwagon75 » Tue Mar 20, 2018 8:47 am

Not sure if you were looking for something else, I have internal network on the MB (IF), and a wireless USB (IF-ID-1):

pinxi -zixxx:

Code: Select all

Network:   Card-1: Qualcomm Atheros Killer E2400 Gigabit Ethernet Controller driver: alx v: kernel 
           port: d000 bus ID: 03:00 chip ID: 1969:e0a1 
           IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
           IP v4: <filter> type: dynamic enp3s0 scope: global broadcast: <filter> 
           IP v6: <filter> scope: link 
           IF-ID-1: enx7062b8ab55d2 state: up speed: N/A duplex: N/A mac: <filter> 
           IP v4: <filter> type: dynamic enx7062b8ab55d2 scope: global broadcast: <filter> 
           IP v6: <filter> scope: link 
           WAN IP: <filter>
Image
Image

User avatar
Pjotr
Level 20
Level 20
Posts: 10781
Joined: Mon Mar 07, 2011 10:18 am
Location: The Netherlands (Holland)
Contact:

Re: Mint Beta testers for the new inxi Perl release requested

Post by Pjotr » Tue Mar 20, 2018 2:47 pm

h2-1 wrote:
Mon Mar 19, 2018 4:41 pm
I notice that the Machine Device got the id wrong, it says Oracle and it shouldn't. That's a small bug due to unexpected data.

Can you show the output of this command: systemd-detect-virt

It looks like that tool might be reporting virtualbox wrong.

Code: Select all

pjotr@pjotr-Virtualbox: systemd-detect-virt
oracle
Tip: 10 things to do after installing Linux Mint 19 Tara
Keep your Linux Mint healthy: Avoid these 10 fatal mistakes
Twitter: twitter.com/easylinuxtips
All in all, horse sense simply makes sense.

User avatar
phd21
Level 16
Level 16
Posts: 6767
Joined: Thu Jan 09, 2014 9:42 pm
Location: Florida

Re: Mint Beta testers for the new inxi Perl release requested

Post by phd21 » Tue Mar 20, 2018 3:08 pm

Hi "h2-1",

I really like that update feature for "pinxi", only I have to run it as sudo (root user) for it to work properly and update system folders which is just fine.

Code: Select all

sudo pinxi -U
I noticed that running "pinxi -ixxx" shows me the local network IP address and the wan public IP address, and it changes properly when I connect to a VPN, nice. :) I did not know that inxi or pinxi could do that. Is there a option flag for getting the DNS servers too? Is there a comprehensive manual for "pinxi" yet, or will that be "man pinxi", or the GitHub Wiki or both?

FYI: I mentioned before that I removed the "xserver-xorg-video-intel" driver based upon a recommendation for older Intel Graphics cards like mine. I had to re-install that because in my Linux Mint KDE systems it seems that an "xorg" video driver must be there (required) by various programs and applications to run or run properly.

Would it help to re-run and post the results of "pinxi -zv8" with the "xserver-xorg-video-intel" driver installed now?

Hope this helps ...
Phd21: Mint KDE 17.3 & 18.3, 64-bit Awesome OS, Ancient Dell OptiPlex 780 Core2Duo E8400 3GHz,4gb Ram,256gb SDD, Video: Intel 4 Graphics, DVD Lightscribe. Why I use KDE?:https://opensource.com/life/15/4/9-reasons-to-use-kde

Cosmo.
Level 23
Level 23
Posts: 17829
Joined: Sat Dec 06, 2014 7:34 am

Re: Mint Beta testers for the new inxi Perl release requested

Post by Cosmo. » Tue Mar 20, 2018 5:57 pm

Not a bug report, but a feature request:

Can you add the information, if the current version of Mint (as we are here in the Mint forum) is a fresh install or an upgrade?

In some cases this information can be crucial and specially the changes in the Mint 18.x series, which only partially get applied, if the system has been upgraded, makes this desirable.

The ideal case would be, if inxi could tell, which version had originally been installed, but I fear, this is likely impossible to find out. But even the information, when the system had been installed at first (discovered by the age of some system files), would be of some help. So if inxi says, that a given system runs Mint 18.3, but we can see also, that the system does exist at least for, lets say, 5 months, than we know, that the system had been installed with a previous version.

User avatar
greerd
Level 5
Level 5
Posts: 978
Joined: Sat Jul 31, 2010 10:58 am
Location: Nova Scotia, Canada

Re: Mint Beta testers for the new inxi Perl release requested

Post by greerd » Tue Mar 20, 2018 6:43 pm

To further phd21's point on pinxi -ixx and tun0, the command shows my tun0 speed as 10 Mbps

Code: Select all

sudo pinxi -ixxz
Network:   Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169 
           v: 2.3LK-NAPI port: d800 bus ID: 04:00 chip ID: 10ec:8168 
           IF: enp4s0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
           IP v4: <filter> scope: global broadcast: <filter> 
           IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
           IP v4: <filter> scope: global broadcast: <filter> 
           WAN IP: <filter>
while I was running speedtest through the tunnel with resultant speeds of:

Code: Select all

Testing download speed........................................
Download: 136.65 Mbit/s
Testing upload speed..................................................
Upload: 10.02 Mbit/s
A speed of 10 Mbps as reported by pinxi -ixx doesn't look right, my ISP supplies 150/10 Mbps down/up.

User avatar
all41
Level 13
Level 13
Posts: 4637
Joined: Tue Dec 31, 2013 9:12 am
Location: Computer, Car, Cage

Re: Mint Beta testers for the new inxi Perl release requested

Post by all41 » Tue Mar 20, 2018 7:23 pm

Cosmo. wrote:
Tue Mar 20, 2018 5:57 pm
Not a bug report, but a feature request:

Can you add the information, if the current version of Mint (as we are here in the Mint forum) is a fresh install or an upgrade?

In some cases this information can be crucial and specially the changes in the Mint 18.x series, which only partially get applied, if the system has been upgraded, makes this desirable.

The ideal case would be, if inxi could tell, which version had originally been installed, but I fear, this is likely impossible to find out. But even the information, when the system had been installed at first (discovered by the age of some system files), would be of some help. So if inxi says, that a given system runs Mint 18.3, but we can see also, that the system does exist at least for, lets say, 5 months, than we know, that the system had been installed with a previous version.
+1 on this request

@phd21
Regarding updating--
sudo inxi -U
has always been the case.
Proud to be a supporter and monthly contributor to Mint.

Post Reply

Return to “Chat about Linux”