[resolu]clavier qwerty sur l'ecran de connexion

French Forum

Moderator: Laurent85

sam_49
Level 3
Level 3
Posts: 186
Joined: Sun Mar 01, 2015 4:20 am
Location: Angers
Contact:

[resolu]clavier qwerty sur l'ecran de connexion

Post by sam_49 »

bonjour,
j'utilise un clavier logitech sans fil
linux : mint 17

lors de l'ouverture de session mon clavier est en mode qwerty alors que j'ai bien le drapeau francais.
confirmé par le fichier /var/log/xorg0.log

Code: Select all

[    33.548] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:2011" (type: KEYBOARD, id 9)
[    33.548] (**) Option "xkb_rules" "evdev"
[    33.548] (**) Option "xkb_model" "pc105"
[    33.548] (**) Option "xkb_layout" "fr"
[    33.548] (**) Option "xkb_variant" "latin9"
[    33.548] (II) evdev: Logitech Unifying Device. Wireless PID:2011: initialized for relative axes.
[    33.548] (WW) evdev: Logitech Unifying Device. Wireless PID:2011: ignoring absolute axes.
[    33.548] (**) Logitech Unifying Device. Wireless PID:2011: (accel) keeping acceleration scheme 1
[    33.548] (**) Logitech Unifying Device. Wireless PID:2011: (accel) acceleration profile 0
[    33.548] (**) Logitech Unifying Device. Wireless PID:2011: (accel) acceleration factor: 2.000
[    33.548] (**) Logitech Unifying Device. Wireless PID:2011: (accel) acceleration threshold: 4
[    33.548] (II) config/udev: Adding input device saa7134 IR (Asus My Cinema PS3- (/dev/input/event9)
[    33.548] (**) saa7134 IR (Asus My Cinema PS3-: Applying InputClass "evdev keyboard catchall"
une fois connecté tout se deroule correctement (clavier en francais)
quelqu'un saurait m'aider a resoudre ce dilemme ?
merci
Last edited by sam_49 on Sun Apr 19, 2015 6:23 am, edited 3 times in total.

sam_49
Level 3
Level 3
Posts: 186
Joined: Sun Mar 01, 2015 4:20 am
Location: Angers
Contact:

Re: clavier qwerty sur l'ecran de connexion

Post by sam_49 »

Bonjour,

personne ne saurais m'aider ? ca deviens tres embettant de devoir a chaque connexion inverser a avec q, m avec ,

SMarais
Level 3
Level 3
Posts: 167
Joined: Mon Jan 21, 2013 5:47 pm

Re: clavier qwerty sur l'ecran de connexion

Post by SMarais »

la méthode la plus simple consiste à éditer le fichier /etc/mdm/Init/Default et de rajouter la ligne suivante juste avant le exit 0:

Code: Select all

/usr/bin/setxkbmap fr
pour éditer le fichier il faut le faire en root

C'est le soucis des clavier logitech.
I have LM Running on all these computers

sam_49
Level 3
Level 3
Posts: 186
Joined: Sun Mar 01, 2015 4:20 am
Location: Angers
Contact:

Re: clavier qwerty sur l'ecran de connexion

Post by sam_49 »

Bonjour,

merci beaucoup SMarais, on dirais bien que ca fonctionne car apres edemarrage plus de pris de bec entre A/Q/M et compagnie :D .

sam_49
Level 3
Level 3
Posts: 186
Joined: Sun Mar 01, 2015 4:20 am
Location: Angers
Contact:

Re: clavier qwerty sur l'ecran de connexion

Post by sam_49 »

sam_49 wrote:Bonjour,

merci beaucoup SMarais, on dirais bien que ca fonctionne car apres edemarrage plus de pris de bec entre A/Q/M et compagnie :D .

Bon bah finalement ca a marché une seule fois et la j'ai du redemarré et bah de retour en anglais lors de la connection et pourtant j'ai birn la ligne donné au dessus dans le fichier /etc/mdm/Init/Default

SMarais
Level 3
Level 3
Posts: 167
Joined: Mon Jan 21, 2013 5:47 pm

Re: [clos] clavier qwerty sur l'ecran de connexion

Post by SMarais »

Un peu surpris que ça ne marche plus. J'utilise ce petit truc sur deux ordinateurs que je redémarre souvent et je n'ai jamais eu à trouver une alternative. J'ai deux clavier Logitech wireless de modèles différents.
Que peux-tu nous dire de plus sur ta configuration?
Pas sur que ça joue beaucoup mais as-tu plusieurs schéma de clavier installé? Fr, en, etc?
I have LM Running on all these computers

sam_49
Level 3
Level 3
Posts: 186
Joined: Sun Mar 01, 2015 4:20 am
Location: Angers
Contact:

Re: [clos] clavier qwerty sur l'ecran de connexion

Post by sam_49 »

dans le parametrage du clavier uniquement le Fr d'installé (Francais - variante obsolete)
configuration avec clavier / souris RF - clavier de modele K520

Carte mere Asus P5KPL
4GO de DDRII
Pentium dualcore 2.6Ghz

si besoin de plus d'infos n'hesitez pas a me demander

SMarais
Level 3
Level 3
Posts: 167
Joined: Mon Jan 21, 2013 5:47 pm

Re: [clos] clavier qwerty sur l'ecran de connexion

Post by SMarais »

essaies ceci:

Code: Select all

/usr/bin/setxkbmap -model pc105 -layout fr -variant oss_latin9
I have LM Running on all these computers

sam_49
Level 3
Level 3
Posts: 186
Joined: Sun Mar 01, 2015 4:20 am
Location: Angers
Contact:

Re: [clos] clavier qwerty sur l'ecran de connexion

Post by sam_49 »

SMarais wrote:essaies ceci:

Code: Select all

/usr/bin/setxkbmap -model pc105 -layout fr -variant oss_latin9
Bonjour,
je dois mettre ca dans le fichier /etc/mdm/Init/Default ?

merci

SMarais
Level 3
Level 3
Posts: 167
Joined: Mon Jan 21, 2013 5:47 pm

Re: [clos] clavier qwerty sur l'ecran de connexion

Post by SMarais »

oui c'est pour tenter de voir si en lui passant une commande plus complète cela peut l'aider à se fixer de manière plus stable.

Je reste quelque peu surpris que la première manip ne fonctionne pas vu que j'utilise ce petit tour sur deux ordinateurs.
I have LM Running on all these computers

sam_49
Level 3
Level 3
Posts: 186
Joined: Sun Mar 01, 2015 4:20 am
Location: Angers
Contact:

Re: [clos] clavier qwerty sur l'ecran de connexion

Post by sam_49 »

ok,
je rajoute donc ca et je verrais au prochain redemarrage.
Je suis aussi surpris que vous sachant que le pavé numerique lui fonctionne directement (suite a l'installation de numlock on)

sam_49
Level 3
Level 3
Posts: 186
Joined: Sun Mar 01, 2015 4:20 am
Location: Angers
Contact:

Re: [clos] clavier qwerty sur l'ecran de connexion

Post by sam_49 »

Bonjour,

je crois que c'est peine perdu. rien ne semble fonctionner. je reste comdamné a taper mon mot de passe d'ouverture de session en mode qwerty :evil: :evil:

fanch
Level 2
Level 2
Posts: 52
Joined: Sun Jul 19, 2009 3:56 pm
Location: (France)

Re: [clos] clavier qwerty sur l'ecran de connexion

Post by fanch »

Salut !
sam_49 wrote:... je reste comdamné a taper mon mot de passe d'ouverture de session en mode qwerty :evil: :evil:
Peut-être pas :D :

Dans un terminal en mode administrateur (su ou sudo suivant les cas), copier-coller les commandes suivantes et choisir les options nécessaires.
Le choix des options s'effectue à l'aide des touches haut et bas du pavé directionnel, la sélection de OK ou Annuler par la touche Tab et la validation par la touche Entrée.

Code: Select all

dpkg-reconfigure locales
Choisir l'option français, mais pas obsolète. Éventuellement français-latin9.
Bien faire attention à rechercher et supprimer les locales pas nécessaires (en-US, par exemple).

Code: Select all

dpkg-reconfigure keyboard-configuration
Choisir l'option correspondant au clavier, rechercher et supprimer les options pas nécessaires s'il y en a.

Redémarrer la machine.

sam_49
Level 3
Level 3
Posts: 186
Joined: Sun Mar 01, 2015 4:20 am
Location: Angers
Contact:

Re: [clos] clavier qwerty sur l'ecran de connexion

Post by sam_49 »

Bonjour,
alors voici le retour des commande :

Code: Select all

dpkg-reconfigure keyboard-configuration
Generating locales...
  en_US.UTF-8... up-to-date
  fr_BE.UTF-8... up-to-date
  fr_CA.UTF-8... up-to-date
  fr_CH.UTF-8... up-to-date
  fr_FR.UTF-8... up-to-date
  fr_LU.UTF-8... up-to-date
Generation complete.

Code: Select all

dpkg-reconfigure keyboard-configuration
Modele du clavier: Logitech cordless desktop
Pays d'origine du clavier : Français
disposition du clavier: Français -Français (variante - latin9 uniquement
Touche destinée a se substituer a altGr : Touche Alt de droite (Alt Gr)
touche compose:pas de touche "compose"
Test de redemarrage en cours...

sam_49
Level 3
Level 3
Posts: 186
Joined: Sun Mar 01, 2015 4:20 am
Location: Angers
Contact:

Re: [clos] clavier qwerty sur l'ecran de connexion

Post by sam_49 »

sam_49 wrote:Bonjour,
alors voici le retour des commande :

Code: Select all

dpkg-reconfigure keyboard-configuration
Generating locales...
  en_US.UTF-8... up-to-date
  fr_BE.UTF-8... up-to-date
  fr_CA.UTF-8... up-to-date
  fr_CH.UTF-8... up-to-date
  fr_FR.UTF-8... up-to-date
  fr_LU.UTF-8... up-to-date
Generation complete.

Code: Select all

dpkg-reconfigure keyboard-configuration
Modele du clavier: Logitech cordless desktop
Pays d'origine du clavier : Français
disposition du clavier: Français -Français (variante - latin9 uniquement
Touche destinée a se substituer a altGr : Touche Alt de droite (Alt Gr)
touche compose:pas de touche "compose"
Test de redemarrage en cours...
--> ecran de connexion : en....qwerty :twisted: :twisted:
test en mettant Modele du clavier: Logitech cordless desktop ou PC generique 105 touches et disposition Français -Français (variante - latin9 uniquement) ou juste Français

je vais finir par peter un cable
si ca peut aider a trouver une solution j'ai ici le detail du log de boot

Code: Select all

[    20.192] 
X.Org X Server 1.15.1
Release Date: 2014-04-13
[    20.192] X Protocol Version 11, Revision 0
[    20.192] Build Operating System: Linux 3.2.0-75-generic i686 Ubuntu
[    20.192] Current Operating System: Linux samuelsalon 3.13.0-37-generic #64-Ubuntu SMP Mon Sep 22 21:30:01 UTC 2014 i686
[    20.192] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-37-generic root=UUID=abc0cfd7-a26f-4d58-ab4f-9251bdd5ef66 ro quiet splash vt.handoff=7
[    20.192] Build Date: 12 February 2015  02:49:46PM
[    20.192] xorg-server 2:1.15.1-0ubuntu2.7 (For technical support please see http://www.ubuntu.com/support) 
[    20.192] Current version of pixman: 0.30.2
[    20.192] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    20.192] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    20.192] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Apr  4 16:14:12 2015
[    20.206] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    20.207] (==) No Layout section.  Using the first Screen section.
[    20.207] (==) No screen section available. Using defaults.
[    20.207] (**) |-->Screen "Default Screen Section" (0)
[    20.207] (**) |   |-->Monitor "<default monitor>"
[    20.207] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    20.207] (==) Automatically adding devices
[    20.207] (==) Automatically enabling devices
[    20.207] (==) Automatically adding GPU devices
[    20.207] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    20.207] 	Entry deleted from font path.
[    20.207] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    20.207] 	Entry deleted from font path.
[    20.207] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    20.207] 	Entry deleted from font path.
[    20.207] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    20.207] 	Entry deleted from font path.
[    20.207] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    20.207] 	Entry deleted from font path.
[    20.207] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    20.207] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    20.207] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    20.207] (II) Loader magic: 0xb774c6c0
[    20.207] (II) Module ABI versions:
[    20.207] 	X.Org ANSI C Emulation: 0.4
[    20.207] 	X.Org Video Driver: 15.0
[    20.207] 	X.Org XInput driver : 20.0
[    20.207] 	X.Org Server Extension : 8.0
[    20.208] (II) xfree86: Adding drm device (/dev/dri/card0)
[    20.209] (--) PCI:*(0:1:0:0) 10de:0640:1462:1575 rev 161, Mem @ 0xfd000000/16777216, 0xe0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000dc00/128, BIOS @ 0x????????/524288
[    20.209] Initializing built-in extension Generic Event Extension
[    20.209] Initializing built-in extension SHAPE
[    20.209] Initializing built-in extension MIT-SHM
[    20.209] Initializing built-in extension XInputExtension
[    20.209] Initializing built-in extension XTEST
[    20.209] Initializing built-in extension BIG-REQUESTS
[    20.209] Initializing built-in extension SYNC
[    20.209] Initializing built-in extension XKEYBOARD
[    20.209] Initializing built-in extension XC-MISC
[    20.209] Initializing built-in extension SECURITY
[    20.209] Initializing built-in extension XINERAMA
[    20.209] Initializing built-in extension XFIXES
[    20.209] Initializing built-in extension RENDER
[    20.209] Initializing built-in extension RANDR
[    20.209] Initializing built-in extension COMPOSITE
[    20.209] Initializing built-in extension DAMAGE
[    20.209] Initializing built-in extension MIT-SCREEN-SAVER
[    20.209] Initializing built-in extension DOUBLE-BUFFER
[    20.209] Initializing built-in extension RECORD
[    20.209] Initializing built-in extension DPMS
[    20.209] Initializing built-in extension Present
[    20.209] Initializing built-in extension DRI3
[    20.209] Initializing built-in extension X-Resource
[    20.209] Initializing built-in extension XVideo
[    20.209] Initializing built-in extension XVideo-MotionCompensation
[    20.209] Initializing built-in extension SELinux
[    20.209] Initializing built-in extension XFree86-VidModeExtension
[    20.209] Initializing built-in extension XFree86-DGA
[    20.209] Initializing built-in extension XFree86-DRI
[    20.209] Initializing built-in extension DRI2
[    20.209] (II) LoadModule: "glx"
[    20.218] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    20.394] (II) Module glx: vendor="X.Org Foundation"
[    20.395] 	compiled for 1.15.1, module version = 1.0.0
[    20.395] 	ABI class: X.Org Server Extension, version 8.0
[    20.395] (==) AIGLX enabled
[    20.395] Loading extension GLX
[    20.395] (==) Matched nvidia as autoconfigured driver 0
[    20.395] (==) Matched nouveau as autoconfigured driver 1
[    20.395] (==) Matched nvidia as autoconfigured driver 2
[    20.395] (==) Matched nouveau as autoconfigured driver 3
[    20.395] (==) Matched modesetting as autoconfigured driver 4
[    20.395] (==) Matched fbdev as autoconfigured driver 5
[    20.395] (==) Matched vesa as autoconfigured driver 6
[    20.395] (==) Assigned the driver to the xf86ConfigLayout
[    20.395] (II) LoadModule: "nvidia"
[    20.482] (WW) Warning, couldn't open module nvidia
[    20.482] (II) UnloadModule: "nvidia"
[    20.482] (II) Unloading nvidia
[    20.482] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    20.482] (II) LoadModule: "nouveau"
[    20.483] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    20.494] (II) Module nouveau: vendor="X.Org Foundation"
[    20.494] 	compiled for 1.15.1, module version = 1.0.11
[    20.494] 	Module class: X.Org Video Driver
[    20.494] 	ABI class: X.Org Video Driver, version 15.0
[    20.494] (II) LoadModule: "modesetting"
[    20.494] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    20.494] (II) Module modesetting: vendor="X.Org Foundation"
[    20.494] 	compiled for 1.15.0, module version = 0.8.1
[    20.494] 	Module class: X.Org Video Driver
[    20.494] 	ABI class: X.Org Video Driver, version 15.0
[    20.494] (II) LoadModule: "fbdev"
[    20.494] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    20.494] (II) Module fbdev: vendor="X.Org Foundation"
[    20.494] 	compiled for 1.15.0, module version = 0.4.4
[    20.494] 	Module class: X.Org Video Driver
[    20.494] 	ABI class: X.Org Video Driver, version 15.0
[    20.494] (II) LoadModule: "vesa"
[    20.495] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    20.495] (II) Module vesa: vendor="X.Org Foundation"
[    20.495] 	compiled for 1.15.0, module version = 2.3.3
[    20.495] 	Module class: X.Org Video Driver
[    20.495] 	ABI class: X.Org Video Driver, version 15.0
[    20.495] (==) Matched nvidia as autoconfigured driver 0
[    20.495] (==) Matched nouveau as autoconfigured driver 1
[    20.495] (==) Matched nvidia as autoconfigured driver 2
[    20.495] (==) Matched nouveau as autoconfigured driver 3
[    20.495] (==) Matched modesetting as autoconfigured driver 4
[    20.495] (==) Matched fbdev as autoconfigured driver 5
[    20.495] (==) Matched vesa as autoconfigured driver 6
[    20.495] (==) Assigned the driver to the xf86ConfigLayout
[    20.495] (II) LoadModule: "nvidia"
[    20.495] (WW) Warning, couldn't open module nvidia
[    20.495] (II) UnloadModule: "nvidia"
[    20.495] (II) Unloading nvidia
[    20.495] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    20.495] (II) LoadModule: "nouveau"
[    20.496] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    20.496] (II) Module nouveau: vendor="X.Org Foundation"
[    20.496] 	compiled for 1.15.1, module version = 1.0.11
[    20.496] 	Module class: X.Org Video Driver
[    20.496] 	ABI class: X.Org Video Driver, version 15.0
[    20.496] (II) UnloadModule: "nouveau"
[    20.496] (II) Unloading nouveau
[    20.496] (II) Failed to load module "nouveau" (already loaded, 0)
[    20.496] (II) LoadModule: "modesetting"
[    20.496] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    20.496] (II) Module modesetting: vendor="X.Org Foundation"
[    20.496] 	compiled for 1.15.0, module version = 0.8.1
[    20.496] 	Module class: X.Org Video Driver
[    20.496] 	ABI class: X.Org Video Driver, version 15.0
[    20.496] (II) UnloadModule: "modesetting"
[    20.496] (II) Unloading modesetting
[    20.496] (II) Failed to load module "modesetting" (already loaded, 0)
[    20.496] (II) LoadModule: "fbdev"
[    20.497] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    20.497] (II) Module fbdev: vendor="X.Org Foundation"
[    20.497] 	compiled for 1.15.0, module version = 0.4.4
[    20.497] 	Module class: X.Org Video Driver
[    20.497] 	ABI class: X.Org Video Driver, version 15.0
[    20.497] (II) UnloadModule: "fbdev"
[    20.497] (II) Unloading fbdev
[    20.497] (II) Failed to load module "fbdev" (already loaded, 0)
[    20.497] (II) LoadModule: "vesa"
[    20.497] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    20.497] (II) Module vesa: vendor="X.Org Foundation"
[    20.497] 	compiled for 1.15.0, module version = 2.3.3
[    20.497] 	Module class: X.Org Video Driver
[    20.497] 	ABI class: X.Org Video Driver, version 15.0
[    20.497] (II) UnloadModule: "vesa"
[    20.497] (II) Unloading vesa
[    20.497] (II) Failed to load module "vesa" (already loaded, 0)
[    20.497] (II) NOUVEAU driver 
[    20.497] (II) NOUVEAU driver for NVIDIA chipset families :
[    20.497] 	RIVA TNT        (NV04)
[    20.497] 	RIVA TNT2       (NV05)
[    20.497] 	GeForce 256     (NV10)
[    20.497] 	GeForce 2       (NV11, NV15)
[    20.497] 	GeForce 4MX     (NV17, NV18)
[    20.497] 	GeForce 3       (NV20)
[    20.497] 	GeForce 4Ti     (NV25, NV28)
[    20.497] 	GeForce FX      (NV3x)
[    20.497] 	GeForce 6       (NV4x)
[    20.497] 	GeForce 7       (G7x)
[    20.497] 	GeForce 8       (G8x)
[    20.497] 	GeForce GTX 200 (NVA0)
[    20.497] 	GeForce GTX 400 (NVC0)
[    20.497] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    20.497] (II) FBDEV: driver for framebuffer: fbdev
[    20.497] (II) VESA: driver for VESA chipsets: vesa
[    20.498] (++) using VT number 8

[    20.499] (II) [drm] nouveau interface version: 1.1.2
[    20.499] (WW) Falling back to old probe method for modesetting
[    20.499] (WW) Falling back to old probe method for fbdev
[    20.499] (II) Loading sub module "fbdevhw"
[    20.499] (II) LoadModule: "fbdevhw"
[    20.499] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    20.499] (II) Module fbdevhw: vendor="X.Org Foundation"
[    20.499] 	compiled for 1.15.1, module version = 0.0.2
[    20.499] 	ABI class: X.Org Video Driver, version 15.0
[    20.499] (WW) Falling back to old probe method for vesa
[    20.499] (II) Loading sub module "dri2"
[    20.499] (II) LoadModule: "dri2"
[    20.499] (II) Module "dri2" already built-in
[    20.499] (--) NOUVEAU(0): Chipset: "NVIDIA NV96"
[    20.499] (II) NOUVEAU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    20.499] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[    20.499] (==) NOUVEAU(0): RGB weight 888
[    20.499] (==) NOUVEAU(0): Default visual is TrueColor
[    20.499] (==) NOUVEAU(0): Using HW cursor
[    20.499] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[    20.499] (==) NOUVEAU(0): Page flipping enabled
[    20.499] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[    20.500] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[    20.500] (II) NOUVEAU(0): Initializing outputs ...
[    20.523] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[    20.551] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[    20.553] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[    20.553] (II) NOUVEAU(0): 3 crtcs needed for screen.
[    20.568] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[    20.568] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[    20.591] (II) NOUVEAU(0): EDID for output DVI-I-1
[    20.619] (II) NOUVEAU(0): EDID for output VGA-1
[    20.619] (II) NOUVEAU(0): Manufacturer: GSM  Model: 4bcd  Serial#: 1201
[    20.619] (II) NOUVEAU(0): Year: 2012  Week: 1
[    20.619] (II) NOUVEAU(0): EDID Version: 1.3
[    20.619] (II) NOUVEAU(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[    20.620] (II) NOUVEAU(0): Sync:  Separate  SyncOnGreen
[    20.620] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 41  vert.: 23
[    20.620] (II) NOUVEAU(0): Gamma: 2.20
[    20.620] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[    20.620] (II) NOUVEAU(0): First detailed timing is preferred mode
[    20.620] (II) NOUVEAU(0): redX: 0.644 redY: 0.335   greenX: 0.304 greenY: 0.613
[    20.620] (II) NOUVEAU(0): blueX: 0.146 blueY: 0.071   whiteX: 0.313 whiteY: 0.329
[    20.620] (II) NOUVEAU(0): Supported established timings:
[    20.620] (II) NOUVEAU(0): 720x400@70Hz
[    20.620] (II) NOUVEAU(0): 640x480@60Hz
[    20.620] (II) NOUVEAU(0): 640x480@75Hz
[    20.620] (II) NOUVEAU(0): 800x600@60Hz
[    20.620] (II) NOUVEAU(0): 800x600@75Hz
[    20.620] (II) NOUVEAU(0): 832x624@75Hz
[    20.620] (II) NOUVEAU(0): 1024x768@60Hz
[    20.620] (II) NOUVEAU(0): 1024x768@75Hz
[    20.620] (II) NOUVEAU(0): Manufacturer's mask: 0
[    20.620] (II) NOUVEAU(0): Supported standard timings:
[    20.620] (II) NOUVEAU(0): #0: hsize: 640  vsize 480  refresh: 75  vid: 20273
[    20.620] (II) NOUVEAU(0): #1: hsize: 800  vsize 600  refresh: 75  vid: 20293
[    20.620] (II) NOUVEAU(0): #2: hsize: 1024  vsize 768  refresh: 75  vid: 20321
[    20.620] (II) NOUVEAU(0): Supported detailed timing:
[    20.620] (II) NOUVEAU(0): clock: 85.5 MHz   Image Size:  406 x 229 mm
[    20.620] (II) NOUVEAU(0): h_active: 1360  h_sync: 1424  h_sync_end 1536 h_blank_end 1792 h_border: 0
[    20.620] (II) NOUVEAU(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 795 v_border: 0
[    20.620] (II) NOUVEAU(0): Supported detailed timing:
[    20.620] (II) NOUVEAU(0): clock: 79.5 MHz   Image Size:  406 x 229 mm
[    20.620] (II) NOUVEAU(0): h_active: 1280  h_sync: 1344  h_sync_end 1472 h_blank_end 1664 h_border: 0
[    20.620] (II) NOUVEAU(0): v_active: 768  v_sync: 771  v_sync_end 778 v_blanking: 798 v_border: 0
[    20.620] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 61 kHz, PixClock max 95 MHz
[    20.620] (II) NOUVEAU(0): Monitor name: W1946
[    20.620] (II) NOUVEAU(0): EDID (in hex):
[    20.620] (II) NOUVEAU(0): 	00ffffffffffff001e6dcd4bb1040000
[    20.620] (II) NOUVEAU(0): 	011601036a291778eafc95a4554d9d25
[    20.620] (II) NOUVEAU(0): 	125054a56a00314f454f614f01010101
[    20.620] (II) NOUVEAU(0): 	010101010101662150b051001b304070
[    20.620] (II) NOUVEAU(0): 	360096e51000001e0e1f008051001e30
[    20.620] (II) NOUVEAU(0): 	4080370096e51000001c000000fd0038
[    20.620] (II) NOUVEAU(0): 	4b1e3d09000a202020202020000000fc
[    20.620] (II) NOUVEAU(0): 	0057313934360a202020202020200000
[    20.620] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[    20.620] (II) NOUVEAU(0): Modeline "1360x768"x60.0   85.50  1360 1424 1536 1792  768 771 777 795 +hsync +vsync (47.7 kHz eP)
[    20.620] (II) NOUVEAU(0): Modeline "1280x768"x59.9   79.50  1280 1344 1472 1664  768 771 778 798 -hsync +vsync (47.8 kHz e)
[    20.620] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[    20.620] (II) NOUVEAU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    20.620] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    20.620] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    20.621] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    20.621] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    20.621] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    20.621] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    20.621] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    20.623] (II) NOUVEAU(0): EDID for output HDMI-1
[    20.623] (II) NOUVEAU(0): Output DVI-I-1 disconnected
[    20.623] (II) NOUVEAU(0): Output VGA-1 connected
[    20.623] (II) NOUVEAU(0): Output HDMI-1 disconnected
[    20.623] (II) NOUVEAU(0): Using exact sizes for initial modes
[    20.623] (II) NOUVEAU(0): Output VGA-1 using initial mode 1360x768
[    20.623] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    20.623] (--) NOUVEAU(0): Virtual size is 1360x768 (pitch 0)
[    20.623] (**) NOUVEAU(0):  Driver mode "1360x768": 85.5 MHz (scaled from 0.0 MHz), 47.7 kHz, 60.0 Hz
[    20.623] (II) NOUVEAU(0): Modeline "1360x768"x60.0   85.50  1360 1424 1536 1792  768 771 777 795 +hsync +vsync (47.7 kHz eP)
[    20.623] (**) NOUVEAU(0):  Driver mode "1280x768": 79.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
[    20.623] (II) NOUVEAU(0): Modeline "1280x768"x59.9   79.50  1280 1344 1472 1664  768 771 778 798 -hsync +vsync (47.8 kHz e)
[    20.623] (**) NOUVEAU(0):  Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[    20.623] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[    20.623] (**) NOUVEAU(0):  Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
[    20.623] (II) NOUVEAU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    20.623] (**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[    20.623] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    20.623] (**) NOUVEAU(0):  Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[    20.623] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    20.623] (**) NOUVEAU(0):  Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[    20.623] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    20.623] (**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[    20.623] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    20.623] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[    20.623] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    20.623] (**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[    20.623] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    20.623] (**) NOUVEAU(0):  Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[    20.623] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    20.623] (==) NOUVEAU(0): DPI set to (96, 96)
[    20.623] (II) Loading sub module "fb"
[    20.623] (II) LoadModule: "fb"
[    20.624] (II) Loading /usr/lib/xorg/modules/libfb.so
[    20.624] (II) Module fb: vendor="X.Org Foundation"
[    20.624] 	compiled for 1.15.1, module version = 1.0.0
[    20.624] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    20.624] (II) Loading sub module "shadowfb"
[    20.624] (II) LoadModule: "shadowfb"
[    20.624] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    20.644] (II) Module shadowfb: vendor="X.Org Foundation"
[    20.644] 	compiled for 1.15.1, module version = 1.0.0
[    20.644] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    20.644] (II) UnloadModule: "modesetting"
[    20.644] (II) Unloading modesetting
[    20.644] (II) UnloadModule: "fbdev"
[    20.644] (II) Unloading fbdev
[    20.644] (II) UnloadSubModule: "fbdevhw"
[    20.644] (II) Unloading fbdevhw
[    20.644] (II) UnloadModule: "vesa"
[    20.644] (II) Unloading vesa
[    20.644] (--) Depth 24 pixmap format is 32 bpp
[    20.650] (II) NOUVEAU(0): Channel setup complete.
[    20.651] (II) NOUVEAU(0): [DRI2] Setup complete
[    20.651] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[    20.651] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[    20.651] (II) Loading sub module "exa"
[    20.651] (II) LoadModule: "exa"
[    20.651] (II) Loading /usr/lib/xorg/modules/libexa.so
[    20.668] (II) Module exa: vendor="X.Org Foundation"
[    20.668] 	compiled for 1.15.1, module version = 2.6.0
[    20.668] 	ABI class: X.Org Video Driver, version 15.0
[    20.668] (II) EXA(0): Driver allocated offscreen pixmaps
[    20.668] (II) EXA(0): Driver registered support for the following operations:
[    20.668] (II)         Solid
[    20.668] (II)         Copy
[    20.668] (II)         Composite (RENDER acceleration)
[    20.668] (II)         UploadToScreen
[    20.668] (II)         DownloadFromScreen
[    20.668] (==) NOUVEAU(0): Backing store enabled
[    20.668] (==) NOUVEAU(0): Silken mouse enabled
[    20.668] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[    20.668] (II) NOUVEAU(0): [XvMC] Extension initialized.
[    20.668] (==) NOUVEAU(0): DPMS enabled
[    20.668] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    20.668] (--) RandR disabled
[    20.676] (II) SELinux: Disabled on system
[    21.168] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    21.168] (II) AIGLX: enabled GLX_ARB_create_context
[    21.168] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    21.168] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    21.168] (II) AIGLX: enabled GLX_INTEL_swap_event
[    21.168] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    21.168] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    21.168] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    21.168] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    21.169] (II) AIGLX: Loaded and initialized nouveau
[    21.169] (II) GLX: Initialized DRI2 GL provider for screen 0
[    21.171] (II) NOUVEAU(0): NVEnterVT is called.
[    21.199] (II) NOUVEAU(0): Setting screen physical size to 359 x 203
[    21.199] resize called 1360 768
[    21.207] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    21.210] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    21.210] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    21.210] (II) LoadModule: "evdev"
[    21.211] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    21.229] (II) Module evdev: vendor="X.Org Foundation"
[    21.229] 	compiled for 1.15.0, module version = 2.8.2
[    21.229] 	Module class: X.Org XInput Driver
[    21.229] 	ABI class: X.Org XInput driver, version 20.0
[    21.229] (II) Using input driver 'evdev' for 'Power Button'
[    21.229] (**) Power Button: always reports core events
[    21.229] (**) evdev: Power Button: Device: "/dev/input/event1"
[    21.229] (--) evdev: Power Button: Vendor 0 Product 0x1
[    21.229] (--) evdev: Power Button: Found keys
[    21.229] (II) evdev: Power Button: Configuring as keyboard
[    21.229] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    21.229] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    21.229] (**) Option "xkb_rules" "evdev"
[    21.229] (**) Option "xkb_model" "pc105"
[    21.229] (**) Option "xkb_layout" "fr"
[    21.229] (**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp"
[    21.234] (II) XKB: reuse xkmfile /var/lib/xkb/server-662CFFA8F4BBDF37909288C2B355E03BDC4748B3.xkm
[    21.252] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    21.252] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    21.252] (II) Using input driver 'evdev' for 'Power Button'
[    21.252] (**) Power Button: always reports core events
[    21.252] (**) evdev: Power Button: Device: "/dev/input/event0"
[    21.253] (--) evdev: Power Button: Vendor 0 Product 0x1
[    21.253] (--) evdev: Power Button: Found keys
[    21.253] (II) evdev: Power Button: Configuring as keyboard
[    21.253] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    21.253] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    21.253] (**) Option "xkb_rules" "evdev"
[    21.253] (**) Option "xkb_model" "pc105"
[    21.253] (**) Option "xkb_layout" "fr"
[    21.253] (**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp"
[    21.253] (II) config/udev: Adding drm device (/dev/dri/card0) card0 /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[    21.253] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[    21.254] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event9)
[    21.254] (II) No input driver specified, ignoring this device.
[    21.254] (II) This device may have been added with another device file.
[    21.255] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event8)
[    21.255] (II) No input driver specified, ignoring this device.
[    21.255] (II) This device may have been added with another device file.
[    21.255] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event7)
[    21.255] (II) No input driver specified, ignoring this device.
[    21.255] (II) This device may have been added with another device file.
[    21.256] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event6)
[    21.256] (II) No input driver specified, ignoring this device.
[    21.256] (II) This device may have been added with another device file.
[    21.256] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event10)
[    21.256] (II) No input driver specified, ignoring this device.
[    21.256] (II) This device may have been added with another device file.
[    21.257] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1024 (/dev/input/event2)
[    21.257] (**) Logitech Unifying Device. Wireless PID:1024: Applying InputClass "evdev pointer catchall"
[    21.257] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:1024'
[    21.257] (**) Logitech Unifying Device. Wireless PID:1024: always reports core events
[    21.257] (**) evdev: Logitech Unifying Device. Wireless PID:1024: Device: "/dev/input/event2"
[    21.257] (--) evdev: Logitech Unifying Device. Wireless PID:1024: Vendor 0x46d Product 0xc52b
[    21.257] (--) evdev: Logitech Unifying Device. Wireless PID:1024: Found 20 mouse buttons
[    21.257] (--) evdev: Logitech Unifying Device. Wireless PID:1024: Found scroll wheel(s)
[    21.257] (--) evdev: Logitech Unifying Device. Wireless PID:1024: Found relative axes
[    21.257] (--) evdev: Logitech Unifying Device. Wireless PID:1024: Found x and y relative axes
[    21.257] (II) evdev: Logitech Unifying Device. Wireless PID:1024: Configuring as mouse
[    21.257] (II) evdev: Logitech Unifying Device. Wireless PID:1024: Adding scrollwheel support
[    21.257] (**) evdev: Logitech Unifying Device. Wireless PID:1024: YAxisMapping: buttons 4 and 5
[    21.257] (**) evdev: Logitech Unifying Device. Wireless PID:1024: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    21.257] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.2/0003:046D:C52B.0003/input/input5/event2"
[    21.257] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:1024" (type: MOUSE, id 8)
[    21.257] (II) evdev: Logitech Unifying Device. Wireless PID:1024: initialized for relative axes.
[    21.258] (**) Logitech Unifying Device. Wireless PID:1024: (accel) keeping acceleration scheme 1
[    21.258] (**) Logitech Unifying Device. Wireless PID:1024: (accel) acceleration profile 0
[    21.258] (**) Logitech Unifying Device. Wireless PID:1024: (accel) acceleration factor: 2.000
[    21.258] (**) Logitech Unifying Device. Wireless PID:1024: (accel) acceleration threshold: 4
[    21.258] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1024 (/dev/input/mouse0)
[    21.258] (II) No input driver specified, ignoring this device.
[    21.258] (II) This device may have been added with another device file.
[    21.259] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:2011 (/dev/input/event3)
[    21.259] (**) Logitech Unifying Device. Wireless PID:2011: Applying InputClass "evdev keyboard catchall"
[    21.259] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:2011'
[    21.259] (**) Logitech Unifying Device. Wireless PID:2011: always reports core events
[    21.259] (**) evdev: Logitech Unifying Device. Wireless PID:2011: Device: "/dev/input/event3"
[    21.259] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Vendor 0x46d Product 0xc52b
[    21.259] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Found 1 mouse buttons
[    21.259] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Found scroll wheel(s)
[    21.259] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Found relative axes
[    21.260] (II) evdev: Logitech Unifying Device. Wireless PID:2011: Forcing relative x/y axes to exist.
[    21.260] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Found absolute axes
[    21.260] (II) evdev: Logitech Unifying Device. Wireless PID:2011: Forcing absolute x/y axes to exist.
[    21.260] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Found keys
[    21.260] (II) evdev: Logitech Unifying Device. Wireless PID:2011: Configuring as mouse
[    21.260] (II) evdev: Logitech Unifying Device. Wireless PID:2011: Configuring as keyboard
[    21.260] (II) evdev: Logitech Unifying Device. Wireless PID:2011: Adding scrollwheel support
[    21.260] (**) evdev: Logitech Unifying Device. Wireless PID:2011: YAxisMapping: buttons 4 and 5
[    21.260] (**) evdev: Logitech Unifying Device. Wireless PID:2011: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    21.260] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.2/0003:046D:C52B.0003/input/input6/event3"
[    21.260] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:2011" (type: KEYBOARD, id 9)
[    21.260] (**) Option "xkb_rules" "evdev"
[    21.260] (**) Option "xkb_model" "pc105"
[    21.260] (**) Option "xkb_layout" "fr"
[    21.260] (**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp"
[    21.260] (II) evdev: Logitech Unifying Device. Wireless PID:2011: initialized for relative axes.
[    21.260] (WW) evdev: Logitech Unifying Device. Wireless PID:2011: ignoring absolute axes.
[    21.260] (**) Logitech Unifying Device. Wireless PID:2011: (accel) keeping acceleration scheme 1
[    21.260] (**) Logitech Unifying Device. Wireless PID:2011: (accel) acceleration profile 0
[    21.260] (**) Logitech Unifying Device. Wireless PID:2011: (accel) acceleration factor: 2.000
[    21.260] (**) Logitech Unifying Device. Wireless PID:2011: (accel) acceleration threshold: 4
[    21.261] (II) config/udev: Adding input device saa7134 IR (Asus My Cinema PS3- (/dev/input/event4)
[    21.261] (**) saa7134 IR (Asus My Cinema PS3-: Applying InputClass "evdev keyboard catchall"
[    21.261] (II) Using input driver 'evdev' for 'saa7134 IR (Asus My Cinema PS3-'
[    21.261] (**) saa7134 IR (Asus My Cinema PS3-: always reports core events
[    21.261] (**) evdev: saa7134 IR (Asus My Cinema PS3-: Device: "/dev/input/event4"
[    21.261] (--) evdev: saa7134 IR (Asus My Cinema PS3-: Vendor 0x1043 Product 0x48cd
[    21.261] (--) evdev: saa7134 IR (Asus My Cinema PS3-: Found keys
[    21.261] (II) evdev: saa7134 IR (Asus My Cinema PS3-: Configuring as keyboard
[    21.261] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1e.0/0000:04:01.0/rc/rc0/input7/event4"
[    21.261] (II) XINPUT: Adding extended input device "saa7134 IR (Asus My Cinema PS3-" (type: KEYBOARD, id 10)
[    21.261] (**) Option "xkb_rules" "evdev"
[    21.261] (**) Option "xkb_model" "pc105"
[    21.261] (**) Option "xkb_layout" "fr"
[    21.261] (**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp"
[    21.263] (II) config/udev: Adding input device MCE IR Keyboard/Mouse (saa7134) (/dev/input/event5)
[    21.263] (**) MCE IR Keyboard/Mouse (saa7134): Applying InputClass "evdev pointer catchall"
[    21.264] (**) MCE IR Keyboard/Mouse (saa7134): Applying InputClass "evdev keyboard catchall"
[    21.264] (II) Using input driver 'evdev' for 'MCE IR Keyboard/Mouse (saa7134)'
[    21.264] (**) MCE IR Keyboard/Mouse (saa7134): always reports core events
[    21.264] (**) evdev: MCE IR Keyboard/Mouse (saa7134): Device: "/dev/input/event5"
[    21.264] (--) evdev: MCE IR Keyboard/Mouse (saa7134): Vendor 0 Product 0
[    21.264] (--) evdev: MCE IR Keyboard/Mouse (saa7134): Found 3 mouse buttons
[    21.264] (--) evdev: MCE IR Keyboard/Mouse (saa7134): Found relative axes
[    21.264] (--) evdev: MCE IR Keyboard/Mouse (saa7134): Found x and y relative axes
[    21.264] (--) evdev: MCE IR Keyboard/Mouse (saa7134): Found keys
[    21.264] (II) evdev: MCE IR Keyboard/Mouse (saa7134): Configuring as mouse
[    21.264] (II) evdev: MCE IR Keyboard/Mouse (saa7134): Configuring as keyboard
[    21.264] (**) evdev: MCE IR Keyboard/Mouse (saa7134): YAxisMapping: buttons 4 and 5
[    21.264] (**) evdev: MCE IR Keyboard/Mouse (saa7134): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    21.264] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event5"
[    21.264] (II) XINPUT: Adding extended input device "MCE IR Keyboard/Mouse (saa7134)" (type: KEYBOARD, id 11)
[    21.264] (**) Option "xkb_rules" "evdev"
[    21.264] (**) Option "xkb_model" "pc105"
[    21.264] (**) Option "xkb_layout" "fr"
[    21.264] (**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp"
[    21.264] (II) evdev: MCE IR Keyboard/Mouse (saa7134): initialized for relative axes.
[    21.264] (**) MCE IR Keyboard/Mouse (saa7134): (accel) keeping acceleration scheme 1
[    21.264] (**) MCE IR Keyboard/Mouse (saa7134): (accel) acceleration profile 0
[    21.264] (**) MCE IR Keyboard/Mouse (saa7134): (accel) acceleration factor: 2.000
[    21.264] (**) MCE IR Keyboard/Mouse (saa7134): (accel) acceleration threshold: 4
[    21.264] (II) config/udev: Adding input device MCE IR Keyboard/Mouse (saa7134) (/dev/input/mouse1)
[    21.264] (II) No input driver specified, ignoring this device.
[    21.264] (II) This device may have been added with another device file.
[    21.374] (II) XKB: reuse xkmfile /var/lib/xkb/server-34CEB476A3CB596DA76FD7010A029F76732EF824.xkm
[    57.243] (II) XKB: reuse xkmfile /var/lib/xkb/server-34CEB476A3CB596DA76FD7010A029F76732EF824.xkm
[    59.221] (II) NOUVEAU(0): EDID vendor "GSM", prod id 19405
[    59.221] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[    59.221] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[    59.221] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    59.221] (II) NOUVEAU(0): Modeline "1360x768"x0.0   85.50  1360 1424 1536 1792  768 771 777 795 +hsync +vsync (47.7 kHz eP)
[    59.221] (II) NOUVEAU(0): Modeline "1280x768"x0.0   79.50  1280 1344 1472 1664  768 771 778 798 -hsync +vsync (47.8 kHz e)
[    59.221] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    59.221] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    59.221] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    59.221] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    59.221] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    59.221] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    59.221] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    59.221] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    65.476] (II) NOUVEAU(0): EDID vendor "GSM", prod id 19405
[    65.476] (II) NOUVEAU(0): Using hsync ranges from config file
[    65.476] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    65.476] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    65.476] (II) NOUVEAU(0): Modeline "1360x768"x0.0   85.50  1360 1424 1536 1792  768 771 777 795 +hsync +vsync (47.7 kHz eP)
[    65.476] (II) NOUVEAU(0): Modeline "1280x768"x0.0   79.50  1280 1344 1472 1664  768 771 778 798 -hsync +vsync (47.8 kHz e)
[    65.476] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    65.476] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    65.476] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    65.476] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    65.476] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    65.476] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    65.476] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    65.476] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    65.733] (II) NOUVEAU(0): EDID vendor "GSM", prod id 19405
[    65.733] (II) NOUVEAU(0): Using hsync ranges from config file
[    65.733] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    65.733] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    65.733] (II) NOUVEAU(0): Modeline "1360x768"x0.0   85.50  1360 1424 1536 1792  768 771 777 795 +hsync +vsync (47.7 kHz eP)
[    65.733] (II) NOUVEAU(0): Modeline "1280x768"x0.0   79.50  1280 1344 1472 1664  768 771 778 798 -hsync +vsync (47.8 kHz e)
[    65.733] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    65.733] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    65.733] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    65.733] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    65.733] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    65.733] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    65.733] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    65.733] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    66.126] (II) XKB: reuse xkmfile /var/lib/xkb/server-662CFFA8F4BBDF37909288C2B355E03BDC4748B3.xkm
[    66.221] (II) XKB: reuse xkmfile /var/lib/xkb/server-02926EF6B4081E691D38599E830714A7126C9CAE.xkm
[    86.793] (II) NOUVEAU(0): EDID vendor "GSM", prod id 19405
[    86.793] (II) NOUVEAU(0): Using hsync ranges from config file
[    86.793] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    86.793] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    86.793] (II) NOUVEAU(0): Modeline "1360x768"x0.0   85.50  1360 1424 1536 1792  768 771 777 795 +hsync +vsync (47.7 kHz eP)
[    86.793] (II) NOUVEAU(0): Modeline "1280x768"x0.0   79.50  1280 1344 1472 1664  768 771 778 798 -hsync +vsync (47.8 kHz e)
[    86.793] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    86.793] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    86.793] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    86.793] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    86.793] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    86.793] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    86.793] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    86.793] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   132.229] (II) XKB: reuse xkmfile /var/lib/xkb/server-02926EF6B4081E691D38599E830714A7126C9CAE.xkm
[   132.233] (II) XKB: reuse xkmfile /var/lib/xkb/server-02926EF6B4081E691D38599E830714A7126C9CAE.xkm
[   132.236] (II) XKB: reuse xkmfile /var/lib/xkb/server-02926EF6B4081E691D38599E830714A7126C9CAE.xkm
[   132.239] (II) XKB: reuse xkmfile /var/lib/xkb/server-02926EF6B4081E691D38599E830714A7126C9CAE.xkm
[   132.243] (II) XKB: reuse xkmfile /var/lib/xkb/server-02926EF6B4081E691D38599E830714A7126C9CAE.xkm
[   132.247] (II) XKB: reuse xkmfile /var/lib/xkb/server-02926EF6B4081E691D38599E830714A7126C9CAE.xkm
[   132.251] (II) XKB: reuse xkmfile /var/lib/xkb/server-02926EF6B4081E691D38599E830714A7126C9CAE.xkm

fanch
Level 2
Level 2
Posts: 52
Joined: Sun Jul 19, 2009 3:56 pm
Location: (France)

Re: [clos] clavier qwerty sur l'ecran de connexion

Post by fanch »


sam_49
Level 3
Level 3
Posts: 186
Joined: Sun Mar 01, 2015 4:20 am
Location: Angers
Contact:

Re: [clos] clavier qwerty sur l'ecran de connexion

Post by sam_49 »

le probleme etant que je ne possede pas des fichiers decrit dans le lien

fanch
Level 2
Level 2
Posts: 52
Joined: Sun Jul 19, 2009 3:56 pm
Location: (France)

Re: [clos] clavier qwerty sur l'ecran de connexion

Post by fanch »

Vois plutôt ici : https://www.skyminds.net/ubuntu-regler- ... demarrage/

Il serait bon que tu nous dise ce que tu utilise comme gestionnaire de connexion, car c'est de son fichier de configuration que vient le problème.

Si c'est mdm, par exemple, il te suffit de faire ceci : editer /etc/mdm/Init/Default et ajouter "/usr/bin/setxkbmap fr" avant exit 0.

https://www.linuxmint-fr.org/forum/dema ... gin#150983

sam_49
Level 3
Level 3
Posts: 186
Joined: Sun Mar 01, 2015 4:20 am
Location: Angers
Contact:

Re: [clos] clavier qwerty sur l'ecran de connexion

Post by sam_49 »

je pense utiliser le gestionnaire mdm mais comment en etre sur ?
voila ce que j'ai a la demande d'ouverture de session :
http://pix.toile-libre.org/?img=1428165489.jpg

edit : solution de replis car la je craque completement : connexion automatique (1 seul utilisateur) et basta

SMarais
Level 3
Level 3
Posts: 167
Joined: Mon Jan 21, 2013 5:47 pm

Re: clavier qwerty sur l'ecran de connexion

Post by SMarais »

Quel kernel utilises-tu?

Est-ce un upgrade depuis une version autre version?
I have LM Running on all these computers

Post Reply

Return to “Français (French)”