Ma connexionx ethenet ne marche pas

French Forum

Moderator: Laurent85

Post Reply
Arko1
Level 1
Level 1
Posts: 44
Joined: Wed Dec 28, 2016 8:33 am

Ma connexionx ethenet ne marche pas

Post by Arko1 »

Salut!
Mon port ethernet ne semble pas fonctionner du tout. Quand je branche le cable, rien ne se passe.
Quelqu'un aurait une solution?
Merci d'avance!
Laurent85
Level 16
Level 16
Posts: 6893
Joined: Tue May 26, 2015 10:11 am

Re: Ma connexionx ethenet ne marche pas

Post by Laurent85 »

Bonjour, ça marchait avant ?
Image
Arko1
Level 1
Level 1
Posts: 44
Joined: Wed Dec 28, 2016 8:33 am

Re: Ma connexionx ethenet ne marche pas

Post by Arko1 »

Salut laurent85!
Non, il me semble bien que je ne l'avais jamais testé depuis que j'ai mint
Laurent85
Level 16
Level 16
Posts: 6893
Joined: Tue May 26, 2015 10:11 am

Re: Ma connexionx ethenet ne marche pas

Post by Laurent85 »

Donne un rapport inxi, en ligne de commande :

Code: Select all

inxi -Fxxz
Image
Arko1
Level 1
Level 1
Posts: 44
Joined: Wed Dec 28, 2016 8:33 am

Re: Ma connexionx ethenet ne marche pas

Post by Arko1 »

Et voila :)


arko@arko-SATELLITE-PRO-NB10t-A-106 ~ $ inxi -Fxxz
System: Host: arko-SATELLITE-PRO-NB10t-A-106 Kernel: 4.4.4-gnu x86_64 (64 bit, gcc: 4.7.2)
Desktop: Cinnamon 2.6.13 dm: mdm Distro: Linux Mint 17.2 Rafaela
Machine: System: TOSHIBA product: SATELLITE PRO NB10t-A-106 version: PU143E-008018FR Chassis: type: 10
Mobo: TOSHIBA model: MA10 Bios: TOSHIBA version: 1.20 date: 12/19/2013
CPU: Dual core Intel Celeron CPU N2810 (-MCP-) cache: 1024 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 7992
Clock Speeds: 1: 1289.208 MHz 2: 564.858 MHz
Graphics: Card: Intel Atom Processor Z36xxx/Z37xxx Series Graphics & Display bus-ID: 00:02.0 chip-ID: 8086:0f31
X.Org: 1.15.1 drivers: intel (unloaded: fbdev,vesa) Resolution: 1366x768@60.1hz
GLX Renderer: Mesa DRI Intel Bay Trail GLX Version: 3.0 Mesa 10.1.3 Direct Rendering: Yes
Audio: Card: Intel Atom Processor Z36xxx/Z37xxx Series High Definition Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:0f04
Sound: Advanced Linux Sound Architecture ver: k4.4.4-gnu
Network: Card-1: Qualcomm Atheros AR9462 Wireless Network Adapter driver: ath9k bus-ID: 02:00.0 chip-ID: 168c:0034
IF: wlan0 state: down mac: <filter>
Card-2: Realtek RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller
driver: r8169 ver: 2.3LK-NAPI port: e000 bus-ID: 03:00.0 chip-ID: 10ec:8136
IF: eth0 state: down mac: <filter>
Drives: HDD Total Size: 500.1GB (86.6% used)
1: id: /dev/sda model: TOSHIBA_MQ01ABF0 size: 500.1GB serial: Z3D8SXFYS
Partition: ID: / size: 454G used: 404G (94%) fs: ext4 ID: /boot size: 237M used: 85M (38%) fs: ext2
RAID: System: supported: N/A
No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Unused Devices: none
Sensors: System Temperatures: cpu: 33.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 181 Uptime: 2:16 Memory: 819.0/3835.5MB Runlevel: 2 Gcc sys: 4.8.4
Client: Shell (bash 4.3.11 running in gnome-terminal) inxi: 1.9.17
Laurent85
Level 16
Level 16
Posts: 6893
Joined: Tue May 26, 2015 10:11 am

Re: Ma connexionx ethenet ne marche pas

Post by Laurent85 »

Le pilote r8169 est chargé, vérifie qu'un lien ethernet est détecté :

Code: Select all

sudo ethtool eth0
sudo mii-tool
Image
Arko1
Level 1
Level 1
Posts: 44
Joined: Wed Dec 28, 2016 8:33 am

Re: Ma connexionx ethenet ne marche pas

Post by Arko1 »

ça donne ça:

arko@arko-SATELLITE-PRO-NB10t-A-106 ~ $ sudo ethtool eth0
[sudo] password for arko:
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Advertised pause frame use: Symmetric Receive-only
Advertised auto-negotiation: Yes
Link partner advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Link partner advertised pause frame use: Symmetric Receive-only
Link partner advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: MII
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbg
Wake-on: pumbg
Current message level: 0x00000033 (51)
drv probe ifdown ifup
Link detected: no
arko@arko-SATELLITE-PRO-NB10t-A-106 ~ $ sudo mii-tool
no MII interfaces found
Laurent85
Level 16
Level 16
Posts: 6893
Joined: Tue May 26, 2015 10:11 am

Re: Ma connexionx ethenet ne marche pas

Post by Laurent85 »

Arko1 wrote: Link detected: no
Problème matériel apparemment, il devrait y avoir Link detected: yes même sans être connecté.
Image
User avatar
Ticrob
Level 2
Level 2
Posts: 70
Joined: Mon Sep 14, 2015 5:46 am
Location: Proche de nul part mais encore trop loin

Re: Ma connexionx ethenet ne marche pas

Post by Ticrob »

Si ce périphérique est HS, et que tu disposes d'un usb (le mieux étant un "c"), il existe des adaptateurs ethernet ;)
https://www.amazon.fr/s/ref=nb_sb_noss? ... r+ethernet
Portable 1 : HP EliteBook 840 G4 - W$ 10 pro & Kubuntu 18.4 (64 bits / 32 Go RAM / 512 Go SSD)
Portable 2 : Dell Latitude E5530 - W$ 10 pro (64 bits)
Netbook : Samsung N220 - LM 19 XFCE (32 bits)
Fixe : Very old customed - LM 18.1 Mate (32 bits)
Laurent85
Level 16
Level 16
Posts: 6893
Joined: Tue May 26, 2015 10:11 am

Re: Ma connexionx ethenet ne marche pas

Post by Laurent85 »

Tu as vérifié le cablage ? le cable est bien branché entre la carte et le boitier adsl ? Si tu l'as sur ton pc ça marche sous Windows ?
Image
Post Reply

Return to “Français (French)”