Installation depuis live USB impossible

Forum de support pour les utilisateurs francophones

Moderator: Laurent85

Forum rules
Topics in this forum are automatically closed 6 months after creation.
zennepiet

Installation depuis live USB impossible

Post by zennepiet »

Bonjour a tous,

je suis sur mint depuis un bon moment et j'ai décidé d'installer Mint 19 en propre, depuis un live USB.
Mon problème est que l'installateur (icone sur le bureau ou depuis le menu) ne réponds pas.
Je me suis même "tapé" un upgrade du live, au cas ou, mais rien n'a changé.
Il y aurait-il une commande depuis le terminal ?
merci pour toute aide :)
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 1 time in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
gm10

Re: Installation depuis live USB impossible

Post by gm10 »

Code: Select all

ubiquity
zennepiet

Re: Installation depuis live USB impossible

Post by zennepiet »

gm10 wrote: Tue Aug 28, 2018 3:09 pm

Code: Select all

ubiquity
Merci, j'essaie de suite :)
zennepiet

Re: Installation depuis live USB impossible

Post by zennepiet »

gm10 wrote: Tue Aug 28, 2018 3:09 pm

Code: Select all

ubiquity
pas de résultat (j'ai éssayé avec sudo aussi, au cas ou) :|
Laurent85
Level 17
Level 17
Posts: 7081
Joined: Tue May 26, 2015 10:11 am

Re: Installation depuis live USB impossible

Post by Laurent85 »

Bonjour,
Depuis le terminal en saisissant ubiquity tu obtiens des messages ?
Image
zennepiet

Re: Installation depuis live USB impossible

Post by zennepiet »

Laurent85 wrote: Tue Aug 28, 2018 4:32 pm Bonjour,
Depuis le terminal en saisissant ubiquity tu obtiens des messages ?
Non, ça "réfléchi un moment puis ça revient a la ligne (désolé, entre-temps j'ai niqué le network manager, plus de connection sur le portable)
Laurent85
Level 17
Level 17
Posts: 7081
Joined: Tue May 26, 2015 10:11 am

Re: Installation depuis live USB impossible

Post by Laurent85 »

En général ce symptôme est provoqué par un problème matériel. Il y a des messages d'erreur dans les logs ?

Code: Select all

dmesg
Image
gm10

Re: Installation depuis live USB impossible

Post by gm10 »

Il y a aussi

Code: Select all

ubiquity --debug
Après regardes dans le log

Code: Select all

xed /var/log/installer/debug
zennepiet

Re: Installation depuis live USB impossible

Post by zennepiet »

merci pour les réponses, je redemarre en live et je fait ca...
mais je dois présiser que mon disque est partitioné et je viens de réinstaller, une autre distro sans problèmes (Librazik2)
je fait tout ca a partir d'un usb multiboot (Multisystem)...
zennepiet

Re: Installation depuis live USB impossible

Post by zennepiet »

Laurent85 wrote: Wed Aug 29, 2018 3:36 am En général ce symptôme est provoqué par un problème matériel. Il y a des messages d'erreur dans les logs ?

Code: Select all

dmesg
voici

Code: Select all

mint@mint:~$ dmesg
[    0.000000] Linux version 4.15.0-20-generic (buildd@lgw01-amd64-039) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #21-Ubuntu SMP Tue Apr 24 06:16:15 UTC 2018 (Ubuntu 4.15.0-20.21-generic 4.15.17)
[    0.000000] Command line: BOOT_IMAGE=(loop)/casper/vmlinuz file=/cdrom/preseed/linuxmint.seed boot=casper locale=es_ES bootkbd=es console-setup/layoutcode=es console-setup/variantcode= iso-scan/filename=/linuxmint-19-cinnamon-64bit-v2.iso noprompt quiet splash --
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bb5a6fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb5a7000-0x00000000bb5eefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bb5ef000-0x00000000bb5f9fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bb5fa000-0x00000000bb5fcfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bb5fd000-0x00000000bb620fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb621000-0x00000000bb621fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb622000-0x00000000bb629fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bb62a000-0x00000000bb62cfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb62d000-0x00000000bb631fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bb632000-0x00000000bb651fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb652000-0x00000000bb694fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bb695000-0x00000000bb7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bde00000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000023bffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Dell Inc. Vostro 3500/0G2R51, BIOS A12 04/08/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x23c000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask E00000000 write-back
[    0.000000]   1 base 200000000 mask FC0000000 write-back
[    0.000000]   2 base 0BC000000 mask FFC000000 uncachable
[    0.000000]   3 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   4 base 1FC000000 mask FFC000000 uncachable
[    0.000000]   5 base 23C000000 mask FFC000000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] total RAM covered: 8000M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 128M 	num_reg: 7  	lose cover RAM: 0G
[    0.000000] e820: update [mem 0xbc000000-0xffffffff] usable ==> reserved
[    0.000000] e820: update [mem 0x1fc000000-0x1ffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbb800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcda0-0x000fcdaf] mapped at [        (ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 97000 size 24576
[    0.000000] BRK [0x1c2d3e000, 0x1c2d3efff] PGTABLE
[    0.000000] BRK [0x1c2d3f000, 0x1c2d3ffff] PGTABLE
[    0.000000] BRK [0x1c2d40000, 0x1c2d40fff] PGTABLE
[    0.000000] BRK [0x1c2d41000, 0x1c2d41fff] PGTABLE
[    0.000000] BRK [0x1c2d42000, 0x1c2d42fff] PGTABLE
[    0.000000] BRK [0x1c2d43000, 0x1c2d43fff] PGTABLE
[    0.000000] BRK [0x1c2d44000, 0x1c2d44fff] PGTABLE
[    0.000000] BRK [0x1c2d45000, 0x1c2d45fff] PGTABLE
[    0.000000] BRK [0x1c2d46000, 0x1c2d46fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x339c8000-0x35cdbfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0410 000024 (v03 DELL  )
[    0.000000] ACPI: XSDT 0x00000000BB5EF088 00005C (v01 DELL   WN09     01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000BB5F8E58 0000F4 (v04 DELL   WN09     01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000BB5EF170 009CE8 (v02 DELL   WN09     00000050 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000BB62DF40 000040
[    0.000000] ACPI: FACS 0x00000000BB62DF80 000040
[    0.000000] ACPI: APIC 0x00000000BB5F8F50 000072 (v01 DELL   WN09     01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000BB5F8FC8 00014E (v01 AMICPU PROC     00000001 MSFT 03000001)
[    0.000000] ACPI: MCFG 0x00000000BB5F9118 00003C (v01 DELL   WN09     01072009 MSFT 00000097)
[    0.000000] ACPI: SLIC 0x00000000BB5F9158 000176 (v01 DELL   WN09     01072009 AMI  00010013)
[    0.000000] ACPI: HPET 0x00000000BB5F92D0 000038 (v01 DELL   WN09     01072009 AMI. 00000003)
[    0.000000] ACPI: OSFR 0x00000000BB5F9308 000086 (v01 DELL   M08      07DE0408 ASL  00000061)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023bffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x23bfd1000-0x23bffbfff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000023bffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bb5a6fff]
[    0.000000]   node   0: [mem 0x00000000bb621000-0x00000000bb621fff]
[    0.000000]   node   0: [mem 0x00000000bb695000-0x00000000bb7fffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000001fbffffff]
[    0.000000]   node   0: [mem 0x0000000200000000-0x000000023bffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023bffffff]
[    0.000000] On node 0 totalpages: 2045615
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11933 pages used for memmap
[    0.000000]   DMA32 zone: 763667 pages, LIFO batch:31
[    0.000000]   Normal zone: 20224 pages used for memmap
[    0.000000]   Normal zone: 1277952 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 100 pages
[    0.000000] Reserving Intel graphics memory at 0x00000000be000000-0x00000000bfffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb5a7000-0xbb5eefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb5ef000-0xbb5f9fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb5fa000-0xbb5fcfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb5fd000-0xbb620fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb622000-0xbb629fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb62a000-0xbb62cfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb62d000-0xbb631fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb632000-0xbb651fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb652000-0xbb694fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb800000-0xbddfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbde00000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x1fc000000-0x1ffffffff]
[    0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2013373
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=(loop)/casper/vmlinuz file=/cdrom/preseed/linuxmint.seed boot=casper locale=es_ES bootkbd=es console-setup/layoutcode=es console-setup/variantcode= iso-scan/filename=/linuxmint-19-cinnamon-64bit-v2.iso noprompt quiet splash --
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7920500K/8182460K available (12300K kernel code, 2470K rwdata, 4240K rodata, 2404K init, 2416K bss, 261960K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 39065 entries in 153 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 2260.916 MHz processor
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.83 BogoMIPS (lpj=9043664)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.029552] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.030615] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.030680] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.030713] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.031037] CPU: Physical Processor ID: 0
[    0.031038] CPU: Processor Core ID: 0
[    0.031050] mce: CPU supports 9 MCE banks
[    0.031059] CPU0: Thermal monitoring enabled (TM1)
[    0.031070] process: using mwait in idle threads
[    0.031074] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[    0.031075] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.031078] Spectre V2 : Mitigation: Full generic retpoline
[    0.031242] Freeing SMP alternatives memory: 36K
[    0.040000] APIC calibration not consistent with PM-Timer: 107ms instead of 100ms
[    0.040000] APIC delta adjusted to PM-Timer: 831241 (897731)
[    0.040000] smpboot: CPU0: Intel(R) Core(TM) i5 CPU       M 430  @ 2.27GHz (family: 0x6, model: 0x25, stepping: 0x2)
[    0.040000] Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver.
[    0.040000] core: CPUID marked event: 'bus cycles' unavailable
[    0.040000] ... version:                3
[    0.040000] ... bit width:              48
[    0.040000] ... generic registers:      4
[    0.040000] ... value mask:             0000ffffffffffff
[    0.040000] ... max period:             000000007fffffff
[    0.040000] ... fixed-purpose events:   3
[    0.040000] ... event mask:             000000070000000f
[    0.040000] Hierarchical SRCU implementation.
[    0.040000] smp: Bringing up secondary CPUs ...
[    0.040000] x86: Booting SMP configuration:
[    0.040000] .... node  #0, CPUs:      #1
[    0.040012] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.040191]  #2 #3
[    0.044091] smp: Brought up 1 node, 4 CPUs
[    0.044091] smpboot: Max logical packages: 1
[    0.044091] smpboot: Total of 4 processors activated (18087.32 BogoMIPS)
[    0.048512] devtmpfs: initialized
[    0.048512] x86/mm: Memory block size: 128MB
[    0.048971] evm: security.selinux
[    0.048972] evm: security.SMACK64
[    0.048973] evm: security.SMACK64EXEC
[    0.048973] evm: security.SMACK64TRANSMUTE
[    0.048974] evm: security.SMACK64MMAP
[    0.048975] evm: security.apparmor
[    0.048975] evm: security.ima
[    0.048976] evm: security.capability
[    0.052070] PM: Registering ACPI NVS region [mem 0xbb5a7000-0xbb5eefff] (294912 bytes)
[    0.052077] PM: Registering ACPI NVS region [mem 0xbb5fa000-0xbb5fcfff] (12288 bytes)
[    0.052078] PM: Registering ACPI NVS region [mem 0xbb622000-0xbb629fff] (32768 bytes)
[    0.052081] PM: Registering ACPI NVS region [mem 0xbb62d000-0xbb631fff] (20480 bytes)
[    0.052082] PM: Registering ACPI NVS region [mem 0xbb652000-0xbb694fff] (274432 bytes)
[    0.052153] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.052153] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.052153] pinctrl core: initialized pinctrl subsystem
[    0.052222] RTC time:  9:26:07, date: 09/02/18
[    0.052353] NET: Registered protocol family 16
[    0.052500] audit: initializing netlink subsys (disabled)
[    0.052507] audit: type=2000 audit(1535880367.052:1): state=initialized audit_enabled=0 res=1
[    0.052507] cpuidle: using governor ladder
[    0.052507] cpuidle: using governor menu
[    0.052507] ACPI: bus type PCI registered
[    0.052507] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.052507] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.052507] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.052507] PCI: Using configuration type 1 for base access
[    0.052507] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.052507] ACPI: Added _OSI(Module Device)
[    0.052507] ACPI: Added _OSI(Processor Device)
[    0.052507] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.052507] ACPI: Added _OSI(Processor Aggregator Device)
[    0.052507] ACPI: Executed 1 blocks of module-level executable AML code
[    0.060003] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.065881] ACPI: Dynamic OEM Table Load:
[    0.065888] ACPI: SSDT 0xFFFF991971CD6000 0003A4 (v01 AMI    IST      00000001 MSFT 03000001)
[    0.067382] ACPI: Interpreter enabled
[    0.067407] ACPI: (supports S0 S3 S4 S5)
[    0.067408] ACPI: Using IOAPIC for interrupt routing
[    0.067452] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.067762] ACPI: Enabled 9 GPEs in block 00 to 3F
[    0.087497] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.087504] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.087782] acpi PNP0A08:00: _OSC: platform does not support [PME]
[    0.088051] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability]
[    0.088428] PCI host bridge to bus 0000:00
[    0.088431] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.088433] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.088434] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.088436] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
[    0.088438] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.088448] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[    0.088473] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    0.088577] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[    0.088589] pci 0000:00:02.0: reg 0x10: [mem 0xfac00000-0xfaffffff 64bit]
[    0.088596] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.088600] pci 0000:00:02.0: reg 0x20: [io  0xf080-0xf087]
[    0.088752] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[    0.088785] pci 0000:00:16.0: reg 0x10: [mem 0xfbc09000-0xfbc0900f 64bit]
[    0.088880] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.088997] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    0.089025] pci 0000:00:1a.0: reg 0x10: [mem 0xfbc08000-0xfbc083ff]
[    0.089130] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.089246] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    0.089278] pci 0000:00:1b.0: reg 0x10: [mem 0xfbc00000-0xfbc03fff 64bit]
[    0.089389] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.089505] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    0.089620] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.089740] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[    0.089853] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.089972] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
[    0.090082] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.090205] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[    0.090316] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.090437] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    0.090466] pci 0000:00:1d.0: reg 0x10: [mem 0xfbc07000-0xfbc073ff]
[    0.090571] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.090681] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.090860] pci 0000:00:1f.0: [8086:3b0b] type 00 class 0x060100
[    0.091074] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
[    0.091102] pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
[    0.091113] pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
[    0.091124] pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
[    0.091135] pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
[    0.091146] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
[    0.091157] pci 0000:00:1f.2: reg 0x24: [mem 0xfbc06000-0xfbc067ff]
[    0.091220] pci 0000:00:1f.2: PME# supported from D3hot
[    0.091326] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    0.091353] pci 0000:00:1f.3: reg 0x10: [mem 0xfbc05000-0xfbc050ff 64bit]
[    0.091382] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.091518] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[    0.091550] pci 0000:00:1f.6: reg 0x10: [mem 0xfbc04000-0xfbc04fff 64bit]
[    0.091823] pci 0000:00:1c.0: PCI bridge to [bus 11]
[    0.091959] pci 0000:12:00.0: [14e4:4353] type 00 class 0x028000
[    0.092017] pci 0000:12:00.0: reg 0x10: [mem 0xfbb00000-0xfbb03fff 64bit]
[    0.092102] pci 0000:12:00.0: enabling Extended Tags
[    0.092225] pci 0000:12:00.0: supports D1 D2
[    0.092226] pci 0000:12:00.0: PME# supported from D0 D3hot D3cold
[    0.104043] pci 0000:00:1c.1: PCI bridge to [bus 12]
[    0.104053] pci 0000:00:1c.1:   bridge window [mem 0xfbb00000-0xfbbfffff]
[    0.104193] pci 0000:13:00.0: [10ec:8168] type 00 class 0x020000
[    0.104227] pci 0000:13:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.104255] pci 0000:13:00.0: reg 0x18: [mem 0xd0b04000-0xd0b04fff 64bit pref]
[    0.104274] pci 0000:13:00.0: reg 0x20: [mem 0xd0b00000-0xd0b03fff 64bit pref]
[    0.104287] pci 0000:13:00.0: reg 0x30: [mem 0xfba00000-0xfba1ffff pref]
[    0.104393] pci 0000:13:00.0: supports D1 D2
[    0.104394] pci 0000:13:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.116034] pci 0000:00:1c.2: PCI bridge to [bus 13]
[    0.116041] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.116048] pci 0000:00:1c.2:   bridge window [mem 0xfba00000-0xfbafffff]
[    0.116057] pci 0000:00:1c.2:   bridge window [mem 0xd0b00000-0xd0bfffff 64bit pref]
[    0.116180] pci 0000:00:1c.4: PCI bridge to [bus 15]
[    0.116185] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.116190] pci 0000:00:1c.4:   bridge window [mem 0xfb000000-0xfb9fffff]
[    0.116196] pci 0000:00:1c.4:   bridge window [mem 0xd0000000-0xd09fffff 64bit pref]
[    0.116282] pci 0000:00:1e.0: PCI bridge to [bus 20] (subtractive decode)
[    0.116294] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.116296] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.116298] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.116300] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
[    0.116994] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.117091] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.117187] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.117281] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.117376] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[    0.117472] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[    0.117573] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.117669] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.120005] SCSI subsystem initialized
[    0.120031] libata version 3.00 loaded.
[    0.120033] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.120033] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.120033] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.120033] vgaarb: loaded
[    0.120036] ACPI: bus type USB registered
[    0.120053] usbcore: registered new interface driver usbfs
[    0.120060] usbcore: registered new interface driver hub
[    0.120080] usbcore: registered new device driver usb
[    0.120118] EDAC MC: Ver: 3.0.0
[    0.120125] PCI: Using ACPI for IRQ routing
[    0.127181] PCI: Discovered peer bus ff
[    0.127182] PCI: root bus ff: using default resources
[    0.127183] PCI: Probing PCI hardware (bus ff)
[    0.127209] PCI host bridge to bus 0000:ff
[    0.127212] pci_bus 0000:ff: root bus resource [io  0x0000-0xffff]
[    0.127214] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
[    0.127215] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[    0.127218] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[    0.127225] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[    0.127273] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[    0.127322] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[    0.127366] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[    0.127409] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[    0.127453] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[    0.127505] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
[    0.127507] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[    0.127510] PCI: pci_cache_line_size set to 64 bytes
[    0.127572] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.127573] e820: reserve RAM buffer [mem 0xbb5a7000-0xbbffffff]
[    0.127575] e820: reserve RAM buffer [mem 0xbb622000-0xbbffffff]
[    0.127577] e820: reserve RAM buffer [mem 0xbb800000-0xbbffffff]
[    0.128001] NetLabel: Initializing
[    0.128001] NetLabel:  domain hash size = 128
[    0.128001] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.128001] NetLabel:  unlabeled traffic allowed by default
[    0.128112] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.128118] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.133028] clocksource: Switched to clocksource hpet
[    0.147317] VFS: Disk quotas dquot_6.6.0
[    0.147340] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.147469] AppArmor: AppArmor Filesystem Enabled
[    0.147509] pnp: PnP ACPI init
[    0.147753] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.147755] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.147757] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.147759] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.147761] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.147768] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.147824] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.147896] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.147899] system 00:02: [mem 0xfe800000-0xfe8001ff] has been reserved
[    0.147904] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.147991] pnp 00:03: Plug and Play ACPI device, IDs SYN0604 SYN0600 SYN0002 PNP0f13 (active)
[    0.148060] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.148351] system 00:05: [io  0x0400-0x047f] has been reserved
[    0.148353] system 00:05: [io  0x1180-0x119f] has been reserved
[    0.148355] system 00:05: [io  0x0500-0x057f] has been reserved
[    0.148357] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.148360] system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved
[    0.148362] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
[    0.148364] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.148369] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.148851] pnp: PnP ACPI: found 6 devices
[    0.155677] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.155698] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 11] add_size 1000
[    0.155702] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 11] add_size 200000 add_align 100000
[    0.155704] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 11] add_size 200000 add_align 100000
[    0.155716] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 12] add_size 1000
[    0.155718] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 12] add_size 200000 add_align 100000
[    0.155753] pci 0000:00:1c.0: BAR 14: assigned [mem 0xd0c00000-0xd0dfffff]
[    0.155759] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0e00000-0xd0ffffff 64bit pref]
[    0.155763] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd1000000-0xd11fffff 64bit pref]
[    0.155766] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.155768] pci 0000:00:1c.1: BAR 13: assigned [io  0x3000-0x3fff]
[    0.155772] pci 0000:00:1c.0: PCI bridge to [bus 11]
[    0.155775] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.155781] pci 0000:00:1c.0:   bridge window [mem 0xd0c00000-0xd0dfffff]
[    0.155786] pci 0000:00:1c.0:   bridge window [mem 0xd0e00000-0xd0ffffff 64bit pref]
[    0.155794] pci 0000:00:1c.1: PCI bridge to [bus 12]
[    0.155797] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.155803] pci 0000:00:1c.1:   bridge window [mem 0xfbb00000-0xfbbfffff]
[    0.155808] pci 0000:00:1c.1:   bridge window [mem 0xd1000000-0xd11fffff 64bit pref]
[    0.155815] pci 0000:00:1c.2: PCI bridge to [bus 13]
[    0.155819] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.155824] pci 0000:00:1c.2:   bridge window [mem 0xfba00000-0xfbafffff]
[    0.155828] pci 0000:00:1c.2:   bridge window [mem 0xd0b00000-0xd0bfffff 64bit pref]
[    0.155836] pci 0000:00:1c.4: PCI bridge to [bus 15]
[    0.155839] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.155845] pci 0000:00:1c.4:   bridge window [mem 0xfb000000-0xfb9fffff]
[    0.155849] pci 0000:00:1c.4:   bridge window [mem 0xd0000000-0xd09fffff 64bit pref]
[    0.155857] pci 0000:00:1e.0: PCI bridge to [bus 20]
[    0.155872] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.155874] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.155876] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.155877] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff window]
[    0.155879] pci_bus 0000:11: resource 0 [io  0x2000-0x2fff]
[    0.155881] pci_bus 0000:11: resource 1 [mem 0xd0c00000-0xd0dfffff]
[    0.155882] pci_bus 0000:11: resource 2 [mem 0xd0e00000-0xd0ffffff 64bit pref]
[    0.155884] pci_bus 0000:12: resource 0 [io  0x3000-0x3fff]
[    0.155886] pci_bus 0000:12: resource 1 [mem 0xfbb00000-0xfbbfffff]
[    0.155887] pci_bus 0000:12: resource 2 [mem 0xd1000000-0xd11fffff 64bit pref]
[    0.155889] pci_bus 0000:13: resource 0 [io  0xe000-0xefff]
[    0.155891] pci_bus 0000:13: resource 1 [mem 0xfba00000-0xfbafffff]
[    0.155892] pci_bus 0000:13: resource 2 [mem 0xd0b00000-0xd0bfffff 64bit pref]
[    0.155894] pci_bus 0000:15: resource 0 [io  0xd000-0xdfff]
[    0.155896] pci_bus 0000:15: resource 1 [mem 0xfb000000-0xfb9fffff]
[    0.155898] pci_bus 0000:15: resource 2 [mem 0xd0000000-0xd09fffff 64bit pref]
[    0.155900] pci_bus 0000:20: resource 4 [io  0x0000-0x0cf7 window]
[    0.155901] pci_bus 0000:20: resource 5 [io  0x0d00-0xffff window]
[    0.155903] pci_bus 0000:20: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.155905] pci_bus 0000:20: resource 7 [mem 0xc0000000-0xffffffff window]
[    0.155993] pci_bus 0000:ff: resource 4 [io  0x0000-0xffff]
[    0.155995] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
[    0.156042] NET: Registered protocol family 2
[    0.156317] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.156544] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.156879] TCP: Hash tables configured (established 65536 bind 65536)
[    0.156939] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.157006] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.157119] NET: Registered protocol family 1
[    0.157140] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.420178] PCI: CLS mismatch (64 != 32), using 64 bytes
[    0.420255] Unpacking initramfs...
[    9.422110] Freeing initrd memory: 35920K
[    9.422191] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    9.422196] software IO TLB [mem 0xb75a7000-0xbb5a7000] (64MB) mapped at [00000000681a8f8a-000000007d7f32d5]
[    9.422503] Scanning for low memory corruption every 60 seconds
[    9.423295] Initialise system trusted keyrings
[    9.423307] Key type blacklist registered
[    9.423357] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    9.424716] zbud: loaded
[    9.425318] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    9.425479] fuse init (API version 7.26)
[    9.427098] Key type asymmetric registered
[    9.427100] Asymmetric key parser 'x509' registered
[    9.427135] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    9.427178] io scheduler noop registered
[    9.427179] io scheduler deadline registered
[    9.427229] io scheduler cfq registered (default)
[    9.428379] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    9.428439] pciehp 0000:00:1c.1:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    9.428482] pciehp 0000:00:1c.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    9.428532] pciehp 0000:00:1c.4:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    9.428630] intel_idle: MWAIT substates: 0x1120
[    9.428632] intel_idle: v0.4.1 model 0x25
[    9.428787] intel_idle: lapic_timer_reliable_states 0xffffffff
[    9.428923] ACPI: AC Adapter [AC] (on-line)
[    9.428988] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    9.428998] ACPI: Power Button [PWRB]
[    9.429039] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    9.429070] ACPI: Lid Switch [LID0]
[    9.429113] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:01/input/input2
[    9.429122] ACPI: Sleep Button [SBTN]
[    9.429158] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    9.429182] ACPI: Power Button [PWRF]
[    9.446149] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    9.449025] thermal LNXTHERM:00: registered as thermal_zone0
[    9.449027] ACPI: Thermal Zone [THM] (65 C)
[    9.449280] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    9.452025] Linux agpgart interface v0.103
[    9.454377] loop: module loaded
[    9.454581] libphy: Fixed MDIO Bus: probed
[    9.454582] tun: Universal TUN/TAP device driver, 1.6
[    9.454658] PPP generic driver version 2.4.2
[    9.454746] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    9.454750] ehci-pci: EHCI PCI platform driver
[    9.454931] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    9.454939] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    9.454954] ehci-pci 0000:00:1a.0: debug port 2
[    9.458964] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    9.458982] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbc08000
[    9.472136] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    9.472224] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    9.472230] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.472232] usb usb1: Product: EHCI Host Controller
[    9.472233] usb usb1: Manufacturer: Linux 4.15.0-20-generic ehci_hcd
[    9.472235] usb usb1: SerialNumber: 0000:00:1a.0
[    9.472577] hub 1-0:1.0: USB hub found
[    9.472593] hub 1-0:1.0: 2 ports detected
[    9.472887] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    9.472892] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    9.472907] ehci-pci 0000:00:1d.0: debug port 2
[    9.476915] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    9.476933] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbc07000
[    9.488850] ACPI: Battery Slot [BAT0] (battery present)
[    9.492120] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    9.492187] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    9.492190] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.492193] usb usb2: Product: EHCI Host Controller
[    9.492195] usb usb2: Manufacturer: Linux 4.15.0-20-generic ehci_hcd
[    9.492197] usb usb2: SerialNumber: 0000:00:1d.0
[    9.492500] hub 2-0:1.0: USB hub found
[    9.492514] hub 2-0:1.0: 2 ports detected
[    9.492669] ehci-platform: EHCI generic platform driver
[    9.492681] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    9.492684] ohci-pci: OHCI PCI platform driver
[    9.492694] ohci-platform: OHCI generic platform driver
[    9.492700] uhci_hcd: USB Universal Host Controller Interface driver
[    9.492765] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at 0x60,0x64 irq 1,12
[    9.522312] serio: i8042 KBD port at 0x60,0x64 irq 1
[    9.522317] serio: i8042 AUX port at 0x60,0x64 irq 12
[    9.522866] mousedev: PS/2 mouse device common for all mice
[    9.524101] rtc_cmos 00:01: RTC can wake from S4
[    9.524426] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    9.524467] rtc_cmos 00:01: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    9.524484] i2c /dev entries driver
[    9.524567] device-mapper: uevent: version 1.0.3
[    9.524814] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    9.525315] ledtrig-cpu: registered to indicate activity on CPUs
[    9.526552] NET: Registered protocol family 10
[    9.532464] Segment Routing with IPv6
[    9.532508] NET: Registered protocol family 17
[    9.532700] Key type dns_resolver registered
[    9.533506] RAS: Correctable Errors collector initialized.
[    9.533546] microcode: sig=0x20652, pf=0x10, revision=0x9
[    9.533676] microcode: Microcode Update Driver: v2.2.
[    9.533697] sched_clock: Marking stable (9533663158, 0)->(9624370193, -90707035)
[    9.534000] registered taskstats version 1
[    9.534012] Loading compiled-in X.509 certificates
[    9.537050] Loaded X.509 cert 'Build time autogenerated kernel key: f4ad6a5babf67650e4ceb385fa5dda8e4a178208'
[    9.537075] zswap: loaded using pool lzo/zbud
[    9.540976] Key type big_key registered
[    9.540981] Key type trusted registered
[    9.542843] Key type encrypted registered
[    9.542847] AppArmor: AppArmor sha1 policy hashing enabled
[    9.542850] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    9.542882] evm: HMAC attrs: 0x1
[    9.543223]   Magic number: 2:495:423
[    9.543409] rtc_cmos 00:01: setting system clock to 2018-09-02 09:26:17 UTC (1535880377)
[    9.544905] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    9.544905] EDD information not available.
[    9.548628] Freeing unused kernel memory: 2404K
[    9.548630] Write protecting the kernel read-only data: 20480k
[    9.549378] Freeing unused kernel memory: 2008K
[    9.554309] Freeing unused kernel memory: 1904K
[    9.555244] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    9.564859] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    9.564860] x86/mm: Checking user space page tables
[    9.574597] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    9.687300] bcma: bus0: Found chip with id 43224, rev 0x01 and package 0x0A
[    9.687332] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[    9.687358] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[    9.687408] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[    9.692801] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[    9.692987] ahci 0000:00:1f.2: version 3.0
[    9.698508] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    9.699078] r8169 0000:13:00.0 eth0: RTL8168d/8111d at 0x00000000975e47ae, a4:ba:db:b7:61:97, XID 083000c0 IRQ 29
[    9.699080] r8169 0000:13:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    9.700374] bcma: bus0: Bus registered
[    9.703955] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    9.703959] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst 
[    9.734348] r8169 0000:13:00.0 enp19s0: renamed from eth0
[    9.772975] scsi host0: ahci
[    9.773159] scsi host1: ahci
[    9.773321] scsi host2: ahci
[    9.773451] scsi host3: ahci
[    9.773570] scsi host4: ahci
[    9.773679] scsi host5: ahci
[    9.773721] ata1: SATA max UDMA/133 abar m2048@0xfbc06000 port 0xfbc06100 irq 28
[    9.773724] ata2: SATA max UDMA/133 abar m2048@0xfbc06000 port 0xfbc06180 irq 28
[    9.773727] ata3: SATA max UDMA/133 abar m2048@0xfbc06000 port 0xfbc06200 irq 28
[    9.773729] ata4: SATA max UDMA/133 abar m2048@0xfbc06000 port 0xfbc06280 irq 28
[    9.773732] ata5: SATA max UDMA/133 abar m2048@0xfbc06000 port 0xfbc06300 irq 28
[    9.773734] ata6: SATA max UDMA/133 abar m2048@0xfbc06000 port 0xfbc06380 irq 28
[    9.808106] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    9.828083] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    9.964463] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    9.964467] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    9.964696] hub 1-1:1.0: USB hub found
[    9.964789] hub 1-1:1.0: 6 ports detected
[    9.984718] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    9.984723] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    9.985224] hub 2-1:1.0: USB hub found
[    9.985326] hub 2-1:1.0: 8 ports detected
[   10.087761] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   10.087791] ata6: SATA link down (SStatus 0 SControl 300)
[   10.087824] ata5: SATA link down (SStatus 0 SControl 300)
[   10.087854] ata4: SATA link down (SStatus 0 SControl 300)
[   10.087893] ata3: SATA link down (SStatus 0 SControl 300)
[   10.087924] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   10.089730] ata1.00: ACPI cmd ef/5a:00:00:00:00:a0 (SET FEATURES) succeeded
[   10.091457] ata1.00: ATA-8: ST9320423AS, D005SDM1, max UDMA/133
[   10.091461] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[   10.093595] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[   10.093984] ata1.00: configured for UDMA/133
[   10.094310] scsi 0:0:0:0: Direct-Access     ATA      ST9320423AS      SDM1 PQ: 0 ANSI: 5
[   10.094758] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[   10.094770] sd 0:0:0:0: [sda] Write Protect is off
[   10.094772] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   10.094788] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   10.094792] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   10.106445] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-L633C, DW40, max UDMA/100
[   10.106450] ata2.00: applying bridge limits
[   10.125596] ata2.00: configured for UDMA/100
[   10.129296] scsi 1:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-L633C DW40 PQ: 0 ANSI: 5
[   10.163464]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
[   10.164573] sd 0:0:0:0: [sda] Attached SCSI disk
[   10.209340] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   10.209343] cdrom: Uniform CD-ROM driver Revision: 3.20
[   10.209531] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   10.209638] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   10.256099] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[   10.272046] usb 2-1.1: new low-speed USB device number 3 using ehci-pci
[   10.281407] pci 0000:00:00.0: Intel HD Graphics Chipset
[   10.281461] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[   10.282083] pci 0000:00:00.0: detected 32768K stolen memory
[   10.282157] [drm] Memory usable by graphics device = 2048M
[   10.282160] [drm] Replacing VGA console driver
[   10.282699] Console: switching to colour dummy device 80x25
[   10.290280] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   10.290282] [drm] Driver supports precise vblank timestamp query.
[   10.293099] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   10.342629] [drm] RC6 disabled, disabling runtime PM support
[   10.344121] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[   10.345291] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   10.345790] acpi device:2a: registered as cooling_device4
[   10.345864] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[   10.370445] usb 1-1.1: New USB device found, idVendor=0a5c, idProduct=4500
[   10.370448] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   10.370449] usb 1-1.1: Product: BCM2046B1
[   10.370451] usb 1-1.1: Manufacturer: Broadcom
[   10.370913] hub 1-1.1:1.0: USB hub found
[   10.371086] hub 1-1.1:1.0: 3 ports detected
[   10.392460] usb 2-1.1: New USB device found, idVendor=046d, idProduct=c05b
[   10.392464] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   10.392468] usb 2-1.1: Product: USB Optical Mouse
[   10.392471] usb 2-1.1: Manufacturer: Logitech
[   10.396830] hidraw: raw HID events driver (C) Jiri Kosina
[   10.401579] usbcore: registered new interface driver usbhid
[   10.401580] usbhid: USB HID core driver
[   10.403947] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:046D:C05B.0001/input/input8
[   10.404127] hid-generic 0003:046D:C05B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
[   10.411314] fbcon: inteldrmfb (fb0) is primary device
[   10.432673] tsc: Refined TSC clocksource calibration: 2260.984 MHz
[   10.432680] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x20973c4cbd4, max_idle_ns: 440795293526 ns
[   10.456106] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
[   10.472103] usb 2-1.3: new high-speed USB device number 4 using ehci-pci
[   10.565979] usb 1-1.4: New USB device found, idVendor=138a, idProduct=0008
[   10.565983] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=1
Last edited by Laurent85 on Sun Sep 02, 2018 6:30 am, edited 1 time in total.
Reason: Code tags
zennepiet

Re: Installation depuis live USB impossible

Post by zennepiet »

suite...

Code: Select all

[   10.565986] usb 1-1.4: SerialNumber: 3b21d62e7d84
[   10.594453] usb 2-1.3: New USB device found, idVendor=13fe, idProduct=4100
[   10.594455] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   10.594456] usb 2-1.3: Product: USB DISK 2.0
[   10.594458] usb 2-1.3: Manufacturer:         
[   10.594459] usb 2-1.3: SerialNumber: 070B27A3ED654F69
[   10.598529] usb-storage 2-1.3:1.0: USB Mass Storage device detected
[   10.598705] scsi host6: usb-storage 2-1.3:1.0
[   10.598800] usbcore: registered new interface driver usb-storage
[   10.600285] usbcore: registered new interface driver uas
[   10.656113] usb 1-1.1.1: new full-speed USB device number 5 using ehci-pci
[   10.672099] usb 2-1.4: new high-speed USB device number 5 using ehci-pci
[   10.718248] psmouse serio1: synaptics: queried max coordinates: x [..5658], y [..4770]
[   10.767958] usb 1-1.1.1: New USB device found, idVendor=413c, idProduct=8161
[   10.767963] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   10.770788] input: HID 413c:8161 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/0003:413C:8161.0002/input/input9
[   10.789196] usb 2-1.4: New USB device found, idVendor=0781, idProduct=5583
[   10.789198] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   10.789200] usb 2-1.4: Product: Ultra Fit
[   10.789201] usb 2-1.4: Manufacturer: SanDisk
[   10.789202] usb 2-1.4: SerialNumber: 4C530001280330110580
[   10.789483] usb-storage 2-1.4:1.0: USB Mass Storage device detected
[   10.789633] scsi host7: usb-storage 2-1.4:1.0
[   10.828475] hid-generic 0003:413C:8161.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 413c:8161] on usb-0000:00:1a.0-1.1.1/input0
[   10.835101] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 583640
[   10.868100] usb 2-1.8: new high-speed USB device number 6 using ehci-pci
[   10.907769] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[   10.908062] usb 1-1.1.2: new full-speed USB device number 6 using ehci-pci
[   11.020215] usb 1-1.1.2: New USB device found, idVendor=413c, idProduct=8162
[   11.020219] usb 1-1.1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   11.023594] input: HID 413c:8162 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/0003:413C:8162.0003/input/input10
[   11.023769] hid-generic 0003:413C:8162.0003: input,hidraw2: USB HID v1.11 Mouse [HID 413c:8162] on usb-0000:00:1a.0-1.1.2/input0
[   11.053116] usb 2-1.8: New USB device found, idVendor=0c45, idProduct=6481
[   11.053120] usb 2-1.8: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[   11.053123] usb 2-1.8: Product: Laptop_Integrated_Webcam_2M
[   11.053126] usb 2-1.8: Manufacturer: CKF9237G164020001L40
[   11.308762] Console: switching to colour frame buffer device 128x48
[   11.327533] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   11.452541] clocksource: Switched to clocksource tsc
[   11.614152] scsi 6:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 4
[   11.614611] sd 6:0:0:0: Attached scsi generic sg2 type 0
[   11.615851] sd 6:0:0:0: [sdb] 31277056 512-byte logical blocks: (16.0 GB/14.9 GiB)
[   11.617704] sd 6:0:0:0: [sdb] Write Protect is off
[   11.617707] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
[   11.619577] sd 6:0:0:0: [sdb] No Caching mode page found
[   11.619632] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[   11.628537]  sdb: sdb1
[   11.634708] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[   11.805128] scsi 7:0:0:0: Direct-Access     SanDisk  Ultra Fit        1.00 PQ: 0 ANSI: 6
[   11.805595] sd 7:0:0:0: Attached scsi generic sg3 type 0
[   11.806071] sd 7:0:0:0: [sdc] 240254976 512-byte logical blocks: (123 GB/115 GiB)
[   11.807070] sd 7:0:0:0: [sdc] Write Protect is off
[   11.807073] sd 7:0:0:0: [sdc] Mode Sense: 43 00 00 00
[   11.808096] sd 7:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   11.814576]  sdc: sdc1
[   11.818063] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[   12.030948] random: crng init done
[   12.462070] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[   12.468663] JFS: nTxBlock = 8192, nTxLock = 65536
[   12.900400] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   13.003797] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   13.115619] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   13.204065] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[   13.481108] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   13.972466] ISO 9660 Extensions: Microsoft Joliet Level 3
[   13.974998] ISO 9660 Extensions: RRIP_1991A
[   16.944422] Adding 2050044k swap on /dev/sda5.  Priority:-2 extents:1 across:2050044k FS
[   25.322303] ip_tables: (C) 2000-2006 Netfilter Core Team
[   25.329238] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[   25.348402] systemd[1]: Detected architecture x86-64.
[   25.350676] systemd[1]: Set hostname to <mint>.
[   25.574269] systemd[1]: Unnecessary job for /dev/loop1 was removed.
[   25.575122] systemd[1]: Created slice User and Session Slice.
[   25.575203] systemd[1]: Reached target Remote File Systems.
[   25.575229] systemd[1]: Reached target Swap.
[   25.575252] systemd[1]: Reached target User and Group Name Lookups.
[   25.575351] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   25.575668] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   25.814340] systemd-journald[1025]: Received request to flush runtime journal from PID 1
[   25.932523] lp: driver loaded but no devices found
[   25.941081] ppdev: user-space parallel port driver
[   27.070813] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   27.205007] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[   27.205365] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[   27.525318] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000549 (\_SB.PCI0.SBRG.GPI1) (20170831/utaddress-247)
[   27.525329] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   27.525331] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000549 (\_SB.PCI0.SBRG.GPI1) (20170831/utaddress-247)
[   27.525337] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   27.525339] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000549 (\_SB.PCI0.SBRG.GPI1) (20170831/utaddress-247)
[   27.525346] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   27.525347] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   27.852347] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input11
[   28.085054] dell-smbios A80593CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS
[   28.623301] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   28.717583] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   28.958081] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[   28.958086] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   28.958089] snd_hda_codec_idt hdaudioC0D0:    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[   28.958091] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[   28.958093] snd_hda_codec_idt hdaudioC0D0:    inputs:
[   28.958096] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0x11
[   28.958098] snd_hda_codec_idt hdaudioC0D0:      Mic=0xa
[   29.150798] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   29.150908] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   29.151008] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   29.288083] usb 1-1.1.3: new full-speed USB device number 7 using ehci-pci
[   29.375618] media: Linux media interface: v0.10
[   29.400192] usb 1-1.1.3: New USB device found, idVendor=413c, idProduct=8160
[   29.400196] usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   29.400198] usb 1-1.1.3: Product: Dell Wireless 365 Bluetooth Module
[   29.400200] usb 1-1.1.3: Manufacturer: Dell Computer Corp
[   29.429379] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   29.433767] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   29.520922] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[   29.527546] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   29.527550] cfg80211: failed to load regulatory.db
[   29.938086] Linux video capture interface: v2.00
[   30.310985] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:6481)
[   30.319490] uvcvideo 2-1.8:1.0: Entity type for entity Extension 5 was not initialized!
[   30.319494] uvcvideo 2-1.8:1.0: Entity type for entity Extension 4 was not initialized!
[   30.319496] uvcvideo 2-1.8:1.0: Entity type for entity Processing 3 was not initialized!
[   30.319499] uvcvideo 2-1.8:1.0: Entity type for entity Camera 1 was not initialized!
[   30.319623] input: Laptop_Integrated_Webcam_2M: In as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/input/input15
[   30.319750] usbcore: registered new interface driver uvcvideo
[   30.319752] USB Video Class driver (1.1.1)
[   30.502132] Bluetooth: Core ver 2.22
[   30.502163] NET: Registered protocol family 31
[   30.502165] Bluetooth: HCI device and connection manager initialized
[   30.502170] Bluetooth: HCI socket layer initialized
[   30.502174] Bluetooth: L2CAP socket layer initialized
[   30.502182] Bluetooth: SCO socket layer initialized
[   30.626053] usbcore: registered new interface driver btusb
[   30.953880] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
[   30.953890] b43: probe of bcma0:1 failed with error -524
[   30.955874] Broadcom 43xx driver loaded [ Features: PNL ]
[   31.238639] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   31.238642] Bluetooth: BNEP filters: protocol multicast
[   31.238648] Bluetooth: BNEP socket layer initialized
[   31.330066] brcmsmac bcma0:1: mfg 4bf core 812 rev 23 class 0 irq 17
[   31.450048] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   31.450460] ieee80211 phy0: registered radio enabled led device: brcmsmac-phy0:radio gpio: 497
[   31.510990] brcmsmac bcma0:1 wlp18s0b1: renamed from wlan0
[   32.273978] IPv6: ADDRCONF(NETDEV_UP): enp19s0: link is not ready
[   32.417522] r8169 0000:13:00.0 enp19s0: link down
[   32.417624] IPv6: ADDRCONF(NETDEV_UP): enp19s0: link is not ready
[   32.423319] IPv6: ADDRCONF(NETDEV_UP): wlp18s0b1: link is not ready
[   32.500558] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   32.500625] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[   32.501819] IPv6: ADDRCONF(NETDEV_UP): wlp18s0b1: link is not ready
[   32.620287] IPv6: ADDRCONF(NETDEV_UP): wlp18s0b1: link is not ready
[   38.937214] Bluetooth: RFCOMM TTY layer initialized
[   38.937223] Bluetooth: RFCOMM socket layer initialized
[   38.937231] Bluetooth: RFCOMM ver 1.11
[   41.369506] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   97.053113] wlp18s0b1: authenticate with b8:94:36:98:91:94
[   97.063989] wlp18s0b1: send auth to b8:94:36:98:91:94 (try 1/3)
[   97.069086] wlp18s0b1: authenticated
[   97.076074] wlp18s0b1: associate with b8:94:36:98:91:94 (try 1/3)
[   97.079682] wlp18s0b1: RX AssocResp from b8:94:36:98:91:94 (capab=0x1411 status=0 aid=4)
[   97.080192] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[   97.080200] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[   97.080216] wlp18s0b1: associated
[   97.084931] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211:  txop exceeded phylen 159/256 dur 1778/1504
[   97.100940] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211:  txop exceeded phylen 137/256 dur 1602/1504
[   97.114504] IPv6: ADDRCONF(NETDEV_CHANGE): wlp18s0b1: link becomes ready
[   97.294693] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[  130.224974] perf: interrupt took too long (2515 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[  173.577015] perf: interrupt took too long (3175 > 3143), lowering kernel.perf_event_max_sample_rate to 63000
[  238.335665] perf: interrupt took too long (3974 > 3968), lowering kernel.perf_event_max_sample_rate to 50250
mint@mint:~$ 
zennepiet

Re: Installation depuis live USB impossible

Post by zennepiet »

gm10 wrote: Wed Aug 29, 2018 3:52 am Il y a aussi

Code: Select all

ubiquity --debug
Après regardes dans le log

Code: Select all

xed /var/log/installer/debug
ubiquity --debug ne donne rien, ça réfléchi un moment puis rien, comme en faisant ubiquity...
gm10

Re: Installation depuis live USB impossible

Post by gm10 »

zennepiet wrote: Sun Sep 02, 2018 5:50 am ubiquity --debug ne donne rien, ça réfléchi un moment puis rien, comme en faisant ubiquity...
Bien sûr, mais est-ce que xed /var/log/installer/debug donne qqc après ?

D'ailleurs, tu as des disques à vérifier :

Code: Select all

[   13.481108] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   41.369506] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
zennepiet

Re: Installation depuis live USB impossible

Post by zennepiet »

gm10 wrote: Wed Aug 29, 2018 3:52 am Il y a aussi

Code: Select all

ubiquity --debug
Après regardes dans le log

Code: Select all

xed /var/log/installer/debug
"xed /var/log/installer/debug" n'apparaît nulle part ni rien dans le style...
zennepiet

Re: Installation depuis live USB impossible

Post by zennepiet »

j'ai re-telechargé la distro au cas ou et pareil... le Mint 18 sur mon usb multiboot fonctionne nickel, pareil pour les autres distros que j'ai dessus...
zennepiet

Re: Installation depuis live USB impossible

Post by zennepiet »

gm10 wrote: Sun Sep 02, 2018 6:20 am
zennepiet wrote: Sun Sep 02, 2018 5:50 am ubiquity --debug ne donne rien, ça réfléchi un moment puis rien, comme en faisant ubiquity...
Bien sûr, mais est-ce que xed /var/log/installer/debug donne qqc après ?

D'ailleurs, tu as des disques à vérifier :

Code: Select all

[   13.481108] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   41.369506] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
sdb1 c'est mon live usb... sdc1 c'est un autre usb... (vais quand même essayer en l'enlevant) :)
gm10

Re: Installation depuis live USB impossible

Post by gm10 »

zennepiet wrote: Sun Sep 02, 2018 6:41 am
gm10 wrote: Wed Aug 29, 2018 3:52 am Il y a aussi

Code: Select all

ubiquity --debug
Après regardes dans le log

Code: Select all

xed /var/log/installer/debug
"xed /var/log/installer/debug" n'apparaît nulle part ni rien dans le style...
Pardon, je n'étais pas bien claire. Il faut exécuter ceci et copier coller le contenu dans ta prochaine response :

Code: Select all

xed /var/log/installer/debug
(xed est le logiciel éditeur de fichiers texte, /var/log/installer/debug est le fichier log que ubiquity --debug devrais créer)
zennepiet

Re: Installation depuis live USB impossible

Post by zennepiet »

[/quote]
Pardon, je n'étais pas bien claire. Il faut exécuter ceci et copier coller le contenu dans ta prochaine response :

Code: Select all

xed /var/log/installer/debug
(xed est le logiciel éditeur de fichiers texte, /var/log/installer/debug est le fichier log que ubiquity --debug devrais créer)
[/quote]

ok, haha suis bête !
le fichier est complètement vide !!!
gm10

Re: Installation depuis live USB impossible

Post by gm10 »

zennepiet wrote: Sun Sep 02, 2018 7:05 am le fichier est complètement vide !!!
Dommage, alors ça se plante avant même de pouvoir écrire sur disque.
zennepiet

Re: Installation depuis live USB impossible

Post by zennepiet »

gm10 wrote: Sun Sep 02, 2018 7:15 am
zennepiet wrote: Sun Sep 02, 2018 7:05 am le fichier est complètement vide !!!
Dommage, alors ça se plante avant même de pouvoir écrire sur disque.
oui, je pense que c'est clairement l'installateur qui a un souci, vais essayer avec une des autres versions, pour voir...
Locked

Return to “Français - French”