Ich habe in meinem System die Hauptfestplatte erneuert und beim erstem Cloneversuch leider wohl den MBR zerschossen und weder Windows noch Linux konnte gestartet werden. Das ganze habe ich wieder hin und zumindest startet Windows wieder. Nun habe ich Linux Mint per USB gestartet und boot-repait ausgeführt. Hier das Protokoll:
Code: Select all
boot-repair-4ppa200 [20230127_2302]
============================== Boot Info Summary ===============================
=> Windows 7/8/10/11/2012 is installed in the MBR of /dev/nvme0n1.
=> Windows 7/8/10/11/2012 is installed in the MBR of /dev/nvme1n1.
=> No boot loader is installed in the MBR of /dev/sda.
=> Windows 7/8/10/11/2012 is installed in the MBR of /dev/sdb.
nvme0n1p1: _____________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
nvme0n1p2: _____________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/10/11/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
nvme1n1p1: _____________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
nvme1n1p2: _____________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/10/11/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/10/11/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda2: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 8/10/11/2012: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/Boot/bootx64.efi /efi/Microsoft/Boot/bootmgfw.efi
/efi/Microsoft/Boot/bootmgr.efi
sda3: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
sda4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/10/11/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 10 or 11
Boot files: /Windows/System32/winload.exe
sdb1: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
sdb2: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb3: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Linux Mint 21
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
sdc: ___________________________________________________________________________
File system: iso9660
Boot sector type: Grub2 (v1.99-2.00)
Boot sector info: Grub2 (v1.99-2.00) is installed in the boot sector of
sdc and looks at sector 0 of the same hard drive for
core.img, but core.img can not be found at this
location.
Mounting failed: mount: /mnt/BootInfo/FD/sdc: /dev/sdc already mounted or mount point busy.
================================ 2 OS detected =================================
OS#1: Linux Mint 21 Vanessa (21) on sdb3
OS#2: Windows 10 or 11 on sda4
================================ Host/Hardware =================================
CPU architecture: 64-bit
Video: GP102 [GeForce GTX 1080 Ti] from NVIDIA Corporation
Live-session OS is Linuxmint 64-bit (Linux Mint 21, vanessa, x86_64)
===================================== UEFI =====================================
BIOS/UEFI firmware: 1.F0(5.14) from American Megatrends Inc.
The firmware is EFI-compatible, and is set in EFI-mode for this live-session.
SecureBoot disabled - SecureBoot disabled
Platform is in Setup Mode - Please report this message to boot.repair@gmail.com.
BootCurrent: 0001
Timeout: 1 seconds
BootOrder: 0001,0000
Boot0000* Windows Boot Manager HD(2,GPT,8d2b3c9c-5b06-4844-b6d4-d15d70fb7f8d,0xfa000,0x32000)/File(\EFI\MICROSOFT\BOOT\BOOTMGFW.EFI)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0001* UEFI: Intenso Rainbow Line 8.07, Partition 2 PciRoot(0x0)/Pci(0x1,0x3)/Pci(0x0,0x0)/USB(11,0)/HD(2,GPT,7d7473ea-fce2-4e11-b099-a49d0a25ce4c,0x48dd90,0x2130)..BO
72293f4ecf0f5b24dce601d2c3c4b26e sda2/Boot/bootx64.efi
72293f4ecf0f5b24dce601d2c3c4b26e sda2/Microsoft/Boot/bootmgfw.efi
75641ea3cae97c7ea935e501d6e5e227 sda2/Microsoft/Boot/bootmgr.efi
============================= Drive/Partition Info =============================
Disks info: ____________________________________________________________________
nvme0n1 : is-GPT, no-BIOSboot, has-noESP, not-usb, not-mmc, no-os, no-wind, 34 sectors * 512 bytes
nvme1n1 : is-GPT, no-BIOSboot, has-noESP, not-usb, not-mmc, no-os, no-wind, 34 sectors * 512 bytes
sda : is-GPT, no-BIOSboot, has---ESP, not-usb, not-mmc, has-os, has-win, 2048 sectors * 512 bytes
sdb : is-GPT, no-BIOSboot, has---ESP, not-usb, not-mmc, has-os, no-wind, 34 sectors * 512 bytes
Partitions info (1/3): _________________________________________________________
nvme0n1p2 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
nvme1n1p2 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sda1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
sda2 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
sda4 : is-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sdb2 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
sdb3 : is-os, 64, apt-get, signed grub-pc grub-efi , grub2, grub-install, grubenv-ok, update-grub, farbios
Partitions info (2/3): _________________________________________________________
nvme0n1p2 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
nvme1n1p2 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda1 : isnotESP, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot
sda2 : is---ESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda4 : isnotESP, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot
sdb2 : is---ESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdb3 : isnotESP, fstab-has-bad-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
Partitions info (3/3): _________________________________________________________
nvme0n1p2 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, nvme0n1
nvme1n1p2 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, nvme1n1
sda1 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sda
sda2 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sda
sda4 : not--sepboot, no-kernel, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sda
sdb2 : not--sepboot, no---boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, no--grub.d, sdb
sdb3 : not--sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sdb
fdisk -l (filtered): ___________________________________________________________
Disk nvme0n1: 465.76 GiB, 500107862016 bytes, 976773168 sectors
Disk identifier: 68DFE898-6B19-4454-ACEB-AEFC9E7AF4D3
Start End Sectors Size Type
nvme0n1p1 34 32767 32734 16M Microsoft reserved
nvme0n1p2 32768 976771071 976738304 465.7G Microsoft basic data
Disk nvme1n1: 931.51 GiB, 1000204886016 bytes, 1953525168 sectors
Disk identifier: 2D1D8DCE-563E-4DFE-A2AB-B611FD2F9CBA
Start End Sectors Size Type
nvme1n1p1 34 32767 32734 16M Microsoft reserved
nvme1n1p2 32768 1953521663 1953488896 931.5G Microsoft basic data
Disk sda: 1.82 TiB, 2000398934016 bytes, 3907029168 sectors
Disk identifier: 8061EF48-6FA6-4033-8F20-112E8CF2ED6E
Start End Sectors Size Type
sda1 2048 1023999 1021952 499M Windows recovery environment
sda2 1024000 1228799 204800 100M EFI System
sda3 1228800 1261567 32768 16M Microsoft reserved
sda4 1261568 3907026943 3905765376 1.8T Microsoft basic data
Disk sdb: 931.51 GiB, 1000204886016 bytes, 1953525168 sectors
Disk identifier: D43C2982-4731-47EF-9672-B7676B18B9FD
Start End Sectors Size Type
sdb1 34 32767 32734 16M Microsoft reserved
sdb2 32768 1083391 1050624 513M EFI System
sdb3 1083392 1953523711 1952440320 931G Linux filesystem
Disk sdc: 7.5 GiB, 8053063680 bytes, 15728640 sectors
Disk identifier: 7D7473EA-FCE2-4E11-B09B-A49D0A25CE4C
Start End Sectors Size Type
sdc1 64 4775311 4775248 2.3G Microsoft basic data
sdc2 4775312 4783807 8496 4.1M EFI System
sdc3 4784128 15728576 10944449 5.2G Linux filesystem
parted -lm (filtered): _________________________________________________________
sda:2000GB:scsi:512:512:gpt:ATA SanDisk SDSSDH3:;
1:1049kB:524MB:523MB:ntfs:Basic data partition:hidden, diag;
2:524MB:629MB:105MB:fat32:EFI system partition:boot, esp;
3:629MB:646MB:16.8MB::Microsoft reserved partition:msftres;
4:646MB:2000GB:2000GB:ntfs:Basic data partition:msftdata;
sdb:1000GB:scsi:512:512:gpt:ATA Samsung SSD 870:;
1:17.4kB:16.8MB:16.8MB::Microsoft reserved partition:msftres;
2:16.8MB:555MB:538MB:fat32:EFI System Partition:boot, esp;
3:555MB:1000GB:1000GB:ext4::;
sdc:8053MB:scsi:512:512:gpt:Intenso Rainbow Line:;
1:32.8kB:2445MB:2445MB::ISO9660:hidden, msftdata;
2:2445MB:2449MB:4350kB::Appended2:boot, esp;
3:2449MB:8053MB:5604MB:ext4::;
nvme0n1:500GB:nvme:512:512:gpt:Samsung SSD 970 EVO Plus 500GB:;
1:17.4kB:16.8MB:16.8MB::Microsoft reserved partition:msftres;
2:16.8MB:500GB:500GB:ntfs:Basic data partition:msftdata;
nvme1n1:1000GB:nvme:512:512:gpt:Samsung SSD 970 EVO Plus 1TB:;
1:17.4kB:16.8MB:16.8MB::Microsoft reserved partition:msftres;
2:16.8MB:1000GB:1000GB:ntfs:Basic data partition:msftdata;
blkid (filtered): ______________________________________________________________
NAME FSTYPE UUID PARTUUID LABEL PARTLABEL
sda
├─sda1 ntfs 54BC44A3BC44820A 667ec4e5-3903-4c29-9e29-d451ea8dd79f Basic data partition
├─sda2 vfat 343C-A6CE 8d2b3c9c-5b06-4844-b6d4-d15d70fb7f8d EFI system partition
├─sda3 742f9652-ca07-4f05-ad7b-1fc301a89430 Microsoft reserved partition
└─sda4 ntfs 04D072ADD072A498 8c92f524-ac43-4d2d-b494-aab13b2f9afc Basic data partition
sdb
├─sdb1 30549a17-19ad-405c-b18b-cb2913564133 Microsoft reserved partition
├─sdb2 vfat 7FAE-E3B8 9137ffb2-1da7-4daf-a7e0-67f59ff65f28 EFI System Partition
└─sdb3 ext4 2576be01-8454-4882-a6ed-5f3fc026cc9d d9ca27b4-94d5-4208-9850-54d9b37d2253
sdc iso9660 2022-07-26-15-24-44-00 Linux Mint 21 Cinnamon 64-bit
├─sdc1 iso9660 2022-07-26-15-24-44-00 7d7473ea-fce2-4e11-b09a-a49d0a25ce4c Linux Mint 21 Cinnamon 64-bit ISO9660
├─sdc2 vfat 8D6C-A9F8 7d7473ea-fce2-4e11-b099-a49d0a25ce4c ESP Appended2
└─sdc3 ext4 147dd2c6-eae2-4c67-89c9-a3474b7a678a fd7dd33b-5511-1348-8863-e13ab1b48373 writable
nvme0n1
├─nvme0n1p1 d8d5cc8e-cb65-4edd-b205-82bafb14e3e3 Microsoft reserved partition
└─nvme0n1p2 ntfs 6E00092F0008FFB7 57d95434-c7aa-497c-b0bd-21ac9a0c17a3 M2.1 500GB Basic data partition
nvme1n1
├─nvme1n1p1 cef3335d-7c66-40c8-9f44-16d60dd628c4 Microsoft reserved partition
└─nvme1n1p2 ntfs 16329A1D329A01C3 c63fa2eb-5cec-4eec-8025-b1bed27cab67 M2.1 1TB Basic data partition
Mount points (filtered): _______________________________________________________
Avail Use% Mounted on
/dev/disk/by-label/writable[/install-logs-2023-01-27.0/log] 4.8G 0% /var/log
/dev/nvme0n1p2 17.5G 96% /mnt/boot-sav/nvme0n1p2
/dev/nvme1n1p2 454.2G 51% /mnt/boot-sav/nvme1n1p2
/dev/sda1 50.8M 90% /mnt/boot-sav/sda1
/dev/sda2 69.6M 28% /mnt/boot-sav/sda2
/dev/sda4 1.5T 19% /mnt/boot-sav/sda4
/dev/sdb2 512M 0% /mnt/boot-sav/sdb2
/dev/sdb3 707.4G 18% /mnt/boot-sav/sdb3
/dev/sdc1 0 100% /cdrom
Mount options (filtered): ______________________________________________________
/dev/disk/by-label/writable[/install-logs-2023-01-27.0/log] ext4 rw,relatime
/dev/nvme0n1p2 fuseblk rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
/dev/nvme1n1p2 fuseblk rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
/dev/sda1 fuseblk rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
/dev/sda2 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
/dev/sda4 fuseblk rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
/dev/sdb2 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
/dev/sdb3 ext4 rw,relatime
/dev/sdc1 iso9660 ro,noatime,nojoliet,check=s,map=n,blocksize=2048,iocharset=utf8
====================== sdb3/boot/grub/grub.cfg (filtered) ======================
Linux Mint 21 Cinnamon 2576be01-8454-4882-a6ed-5f3fc026cc9d
Linux Mint 21 Cinnamon, with Linux 5.15.0-56-generic 2576be01-8454-4882-a6ed-5f3fc026cc9d
Linux Mint 21 Cinnamon, with Linux 5.15.0-48-generic 2576be01-8454-4882-a6ed-5f3fc026cc9d
Linux Mint 21 Cinnamon, with Linux 5.15.0-47-generic 2576be01-8454-4882-a6ed-5f3fc026cc9d
Linux Mint 21 Cinnamon, with Linux 5.15.0-46-generic 2576be01-8454-4882-a6ed-5f3fc026cc9d
Linux Mint 21 Cinnamon, with Linux 5.15.0-41-generic 2576be01-8454-4882-a6ed-5f3fc026cc9d
Windows Boot Manager (on sda2) osprober-efi-6A66-F75C
### END /etc/grub.d/30_os-prober ###
UEFI Firmware Settings uefi-firmware
### END /etc/grub.d/30_uefi-firmware ###
========================== sdb3/etc/fstab (filtered) ===========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdb3 during installation
UUID=2576be01-8454-4882-a6ed-5f3fc026cc9d / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda2 during installation
UUID=6A66-F75C /boot/efi vfat umask=0077 0 1
/swapfile none swap sw 0 0
======================= sdb3/etc/default/grub (filtered) =======================
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
==================== sdb3: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
36.019947052 = 38.676123648 boot/grub/grub.cfg 1
448.300796509 = 481.359314944 boot/vmlinuz 1
928.480049133 = 996.947861504 boot/vmlinuz-5.15.0-41-generic 1
478.457027435 = 513.739321344 boot/vmlinuz-5.15.0-46-generic 1
496.027339935 = 532.605300736 boot/vmlinuz-5.15.0-47-generic 1
74.660148621 = 80.165724160 boot/vmlinuz-5.15.0-48-generic 1
448.300796509 = 481.359314944 boot/vmlinuz-5.15.0-56-generic 1
74.660148621 = 80.165724160 boot/vmlinuz.old 1
86.891597748 = 93.299142656 boot/initrd.img 3
68.516597748 = 73.569136640 boot/initrd.img-5.15.0-41-generic 2
70.010486603 = 75.173187584 boot/initrd.img-5.15.0-46-generic 1
78.016597748 = 83.769683968 boot/initrd.img-5.15.0-47-generic 3
91.516597748 = 98.265198592 boot/initrd.img-5.15.0-48-generic 3
86.891597748 = 93.299142656 boot/initrd.img-5.15.0-56-generic 3
91.516597748 = 98.265198592 boot/initrd.img.old 3
===================== sdb3: ls -l /etc/grub.d/ (filtered) ======================
-rwxr-xr-x 1 root root 18683 Apr 15 2022 10_linux
-rwxr-xr-x 1 root root 43031 Apr 15 2022 10_linux_zfs
-rwxr-xr-x 1 root root 14180 Apr 15 2022 20_linux_xen
-rwxr-xr-x 1 root root 13369 Apr 15 2022 30_os-prober
-rwxr-xr-x 1 root root 1372 Apr 15 2022 30_uefi-firmware
-rwxr-xr-x 1 root root 700 Feb 19 2022 35_fwupd
-rwxr-xr-x 1 root root 214 Apr 15 2022 40_custom
-rwxr-xr-x 1 root root 215 Apr 15 2022 41_custom
=========================== sdb3/etc/grub.d/35_fwupd ===========================
#! /bin/sh
# SPDX-License-Identifier: LGPL-2.1+
set -e
[ -d ${pkgdatadir:?} ]
# shellcheck source=/dev/null
. "$pkgdatadir/grub-mkconfig_lib"
if [ -f /var/lib/fwupd/uefi_capsule.conf ] &&
ls /sys/firmware/efi/efivars/fwupd-*-0abba7dc-e516-4167-bbf5-4d9d1c739416 1>/dev/null 2>&1; then
. /var/lib/fwupd/uefi_capsule.conf
if [ "${EFI_PATH}" != "" ] && [ "${ESP}" != "" ]; then
echo "Adding Linux Firmware Updater entry" >&2
cat << EOF
menuentry 'Linux Firmware Updater' \$menuentry_id_option 'fwupd' {
EOF
${grub_probe:?}
prepare_grub_to_access_device '`${grub_probe} --target=device \${ESP}` | sed -e "s/^/\t/"'
cat << EOF
chainloader ${EFI_PATH}
}
EOF
fi
fi
Suggested repair: ______________________________________________________________
The default repair of the Boot-Repair utility would reinstall the grub-efi of
sdb3,
using the following options: sdb2/boot/efi
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file
Final advice in case of suggested repair: ______________________________________
Please do not forget to make your UEFI firmware boot on the Linux Mint 21 Vanessa (21) entry (sdb2/efi/****/grub****.efi (**** will be updated in the final message) file) !
If your computer reboots directly into Windows, try to change the boot order in your UEFI firmware.
If your UEFI firmware does not allow to change the boot order, change the default boot entry of the Windows bootloader.
For example you can boot into Windows, then type the following command in an admin command prompt:
bcdedit /set {bootmgr} path \EFI\****\grub****.efi (**** will be updated in the final message)
Danke für Hilfe
Jan