Wodim unter Ubuntu 12.04( Linux Mint 13) fehler !!
Posted: Sat Oct 06, 2012 10:04 am
Hallo
Geilch mal asl erste Info ich bin Anfänger also bitte alles so einfach als möglich , da ich erst in der lernphase bin
Ich versuche eine Dl DVD zu brennen
Lese mich seit einigen Tagen ein aber weiter als
harry@Desktop ~ $ wodim -v -overburn -dummy speed=2 dev='/dev/sg0' 1.iso
wodim: No write mode specified.
wodim: Assuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
TOC Type: 1 = CD-ROM
wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
scsidev: '/dev/sg0'
devname: '/dev/sg0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.34
Wodim version: 1.1.11
SCSI buffer size: 64512
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'TSSTcorp'
Identification : 'CDDVDW SH-S223C '
Revision : 'SB02'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x002B (DVD+R/DL)
Profile: 0x002B (DVD+R/DL) (current)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1048576 = 1024 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
FIFO size : 12582912 = 12288 KB
Track 01: data 8334 MB
Total size: 9571 MB (948:13.53) = 4267015 sectors
Lout start: 9571 MB (948:15/40) = 4267015 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Blocks total: 4173824 Blocks current: 4173824 Blocks remaining: -93191
wodim: WARNING: Data may not fit on current disk.
wodim: Notice: Most recorders cannot write CD's >= 90 minutes.
wodim: Notice: Use -ignsize option to allow >= 90 minutes.
wodim: Notice: Overburning active. Trying to write more than the official disk capacity.
Speed set to 5540 KB/s
Starting to write CD/DVD at speed 4.0 in dummy unknown mode for single session.
Last chance to quit, starting dummy write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Errno: 5 (Input/output error), reserve track scsi sendcmd: no error
CDB: 53 00 00 00 00 00 41 1C 07 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.002s timeout 40s
wodim: Cannot open new session.
Writing time: 0.054s
wodim: fifo had 191 puts and 0 gets.
wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
komm ich nicht
Kann mir wer weiter helfen bitte
Danke lg aus Österreich
mfg
HD
Geilch mal asl erste Info ich bin Anfänger also bitte alles so einfach als möglich , da ich erst in der lernphase bin
Ich versuche eine Dl DVD zu brennen
Lese mich seit einigen Tagen ein aber weiter als
harry@Desktop ~ $ wodim -v -overburn -dummy speed=2 dev='/dev/sg0' 1.iso
wodim: No write mode specified.
wodim: Assuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
TOC Type: 1 = CD-ROM
wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
scsidev: '/dev/sg0'
devname: '/dev/sg0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.34
Wodim version: 1.1.11
SCSI buffer size: 64512
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'TSSTcorp'
Identification : 'CDDVDW SH-S223C '
Revision : 'SB02'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x002B (DVD+R/DL)
Profile: 0x002B (DVD+R/DL) (current)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1048576 = 1024 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
FIFO size : 12582912 = 12288 KB
Track 01: data 8334 MB
Total size: 9571 MB (948:13.53) = 4267015 sectors
Lout start: 9571 MB (948:15/40) = 4267015 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Blocks total: 4173824 Blocks current: 4173824 Blocks remaining: -93191
wodim: WARNING: Data may not fit on current disk.
wodim: Notice: Most recorders cannot write CD's >= 90 minutes.
wodim: Notice: Use -ignsize option to allow >= 90 minutes.
wodim: Notice: Overburning active. Trying to write more than the official disk capacity.
Speed set to 5540 KB/s
Starting to write CD/DVD at speed 4.0 in dummy unknown mode for single session.
Last chance to quit, starting dummy write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Errno: 5 (Input/output error), reserve track scsi sendcmd: no error
CDB: 53 00 00 00 00 00 41 1C 07 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.002s timeout 40s
wodim: Cannot open new session.
Writing time: 0.054s
wodim: fifo had 191 puts and 0 gets.
wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
komm ich nicht
Kann mir wer weiter helfen bitte
Danke lg aus Österreich
mfg
HD