Support-Forum für deutschsprachige Benutzer
Moderator: karlchen
Forum rules
Topics in this forum are automatically closed 6 months after creation.
achim55
Level 1
Posts: 16 Joined: Tue Apr 13, 2021 12:37 pm
Post
by achim55 » Tue Apr 20, 2021 5:15 am
Hallo,
ich habe an der Quadro 4000 drei Monitore angeschlossen. Leider funktionieren nur 2
Hat einer eine Idee warum er mir den Fehler anzeigt, wenn ich den dritten aktiviere ?
VG
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 460.39
Section "ServerLayout"
# Removed Option "Xinerama" "1"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "BenQ GL2760"
HorizSync 30.0 - 83.0
VertRefresh 50.0 - 76.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "BenQ GL2760"
HorizSync 30.0 - 83.0
VertRefresh 50.0 - 76.0
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "Quadro 4000"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "Quadro 4000"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
# Removed Option "metamodes" "DVI-I-1: nvidia-auto-select +1920+0, DP-0: nvidia-auto-select +0+0"
# Removed Option "metamodes" "DVI-I-1: nvidia-auto-select +1920+0, DP-0: nvidia-auto-select +0+0, DP-1: nvidia-auto-select +3840+0"
# Removed Option "metamodes" "DVI-I-1: nvidia-auto-select +1920+0, DP-0: nvidia-auto-select +0+0"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "metamodes" "DVI-I-1: nvidia-auto-select +1920+0, DP-0: nvidia-auto-select +0+0, DP-1: nvidia-auto-select +3840+0"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "Stereo" "0"
Option "metamodes" "DP-1: nvidia-auto-select +0+0 {AllowGSYNC=Off}"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Attachments
Last edited by
LockBot on Wed Dec 28, 2022 7:16 am, edited 1 time in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
ehtron
Level 10
Posts: 3364 Joined: Thu Apr 14, 2016 8:15 am
Location: Germany / Baltic Sea
Contact:
Post
by ehtron » Tue Apr 20, 2021 5:17 am
Hi
um welches betriebssystem geht es..
bringe mal dein system als codeblock
siehe info threads hier oben.
und auch solche ausgaben als codeblock und nicht als zitat bringen.
Lg. Ehtron :)
Keine Hilfe bei fehlender System / Desktop Angabe.
Ich gebe Hilfe zur Selbsthilfe.
achim55
Level 1
Posts: 16 Joined: Tue Apr 13, 2021 12:37 pm
Post
by achim55 » Tue Apr 20, 2021 5:29 am
huch, habe ich gar nicht drauf geachtet
Code: Select all
[code]
System: Kernel: 5.4.0-72-generic x86_64 bits: 64 compiler: gcc v: 9.3.0 Desktop: MATE 1.24.0
wm: marco dm: LightDM Distro: Linux Mint 20.1 Ulyssa base: Ubuntu 20.04 focal
Machine: Type: Desktop System: LENOVO product: 2553A18 v: ThinkStation E31 serial: <filter>
Mobo: LENOVO model: MAHOBAY serial: <filter> BIOS: LENOVO v: 9SKT39AUS date: 08/07/2012
CPU: Topology: Quad Core model: Intel Xeon E3-1270 V2 bits: 64 type: MT MCP arch: Ivy Bridge
rev: 9 L2 cache: 8192 KiB
flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 55871
Speed: 3293 MHz min/max: 1600/3900 MHz Core speeds (MHz): 1: 3714 2: 3837 3: 3789
4: 3811 5: 3859 6: 3785 7: 3778 8: 3824
Graphics: Device-1: NVIDIA GF100GL [Quadro 4000] driver: nvidia v: 390.141 bus ID: 01:00.0
chip ID: 10de:06dd
Display: x11 server: X.Org 1.20.9 driver: none unloaded: nvidia compositor: marco
resolution: 1920x1080~60Hz, 1920x1080~60Hz
OpenGL: renderer: Quadro 4000/PCIe/SSE2 v: 4.6.0 NVIDIA 390.141 direct render: Yes
Audio: Device-1: Intel 7 Series/C216 Family High Definition Audio vendor: Lenovo
driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:1e20
Device-2: NVIDIA GF100 High Definition Audio driver: snd_hda_intel v: kernel
bus ID: 01:00.1 chip ID: 10de:0be5
Sound Server: ALSA v: k5.4.0-72-generic
Network: Device-1: Intel 82579LM Gigabit Network vendor: Lenovo driver: e1000e v: 3.2.6-k
port: f040 bus ID: 00:19.0 chip ID: 8086:1502
IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: Local Storage: total: 1.36 TiB used: 61.62 GiB (4.4%)
ID-1: /dev/sda vendor: Western Digital model: WDS500G2B0A-00SM50 size: 465.76 GiB
speed: 6.0 Gb/s serial: <filter>
ID-2: /dev/sdg type: USB vendor: Western Digital model: WD10JPVX-22JC3T0
size: 931.51 GiB serial: <filter>
Partition: ID-1: / size: 455.29 GiB used: 9.44 GiB (2.1%) fs: ext4 dev: /dev/dm-1
ID-2: /boot size: 703.5 MiB used: 205.1 MiB (29.2%) fs: ext4 dev: /dev/sda5
ID-3: swap-1 size: 980.0 MiB used: 0 KiB (0.0%) fs: swap dev: /dev/dm-2
USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 3 rev: 2.0 chip ID: 1d6b:0002
Hub: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0
chip ID: 8087:0024
Device-1: 1-1.2:4 info: ASMedia ASM1051 SATA 3Gb/s bridge type: Mass Storage
driver: usb-storage rev: 2.1 chip ID: 174c:5106
Device-2: 1-1.4:3 info: Realtek RTS5182 Card Reader type: Mass Storage
driver: ums-realtek rev: 2.0 chip ID: 0bda:0184
Hub: 2-0:1 info: Full speed (or root) Hub ports: 3 rev: 2.0 chip ID: 1d6b:0002
Hub: 2-1:2 info: Intel Integrated Rate Matching Hub ports: 8 rev: 2.0
chip ID: 8087:0024
Hub: 2-1.5:3 info: IBM 2-port low-power hub ports: 3 rev: 1.1 chip ID: 04b3:301a
Device-3: 2-1.5.1:5 info: IBM SK-8815 Keyboard type: Keyboard,HID
driver: hid-generic,usbhid rev: 1.1 chip ID: 04b3:301b
Device-4: 2-1.6:4 info: Logitech M105 Optical Mouse type: Mouse
driver: hid-generic,usbhid rev: 2.0 chip ID: 046d:c077
Hub: 3-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0 chip ID: 1d6b:0002
Hub: 4-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 chip ID: 1d6b:0003
Sensors: System Temperatures: cpu: 46.0 C mobo: N/A gpu: nvidia temp: 87 C
Fan Speeds (RPM): N/A gpu: nvidia fan: 44%
Repos: No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
1: deb [arch=amd64] http: //dl.google.com/linux/chrome/deb/ stable main
Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
1: deb http: //packages.linuxmint.com ulyssa main upstream import backport #id:linuxmint_main
2: deb http: //archive.ubuntu.com/ubuntu focal main restricted universe multiverse
3: deb http: //archive.ubuntu.com/ubuntu focal-updates main restricted universe multiverse
4: deb http: //archive.ubuntu.com/ubuntu focal-backports main restricted universe multiverse
5: deb http: //security.ubuntu.com/ubuntu/ focal-security main restricted universe multiverse
6: deb http: //archive.canonical.com/ubuntu/ focal partner
Info: Processes: 270 Uptime: 26m Memory: 15.58 GiB used: 1.54 GiB (9.9%) Init: systemd v: 245
runlevel: 5 Compilers: gcc: 9.3.0 alt: 9 Client: Unknown python3.8 client inxi: 3.0.38
[/code]
ehtron
Level 10
Posts: 3364 Joined: Thu Apr 14, 2016 8:15 am
Location: Germany / Baltic Sea
Contact:
Post
by ehtron » Tue Apr 20, 2021 5:35 am
Hi
evtl. bringt eine andere version aus dem ppa was
https://www.ehlertronic.de/linux/tipps- ... .html#c703
in den neueren versionen wird die x-config file gar nicht mehr gebraucht.
was sagt die desktop monitor einstellung dazu.
Lg. Ehtron :)
Keine Hilfe bei fehlender System / Desktop Angabe.
Ich gebe Hilfe zur Selbsthilfe.
achim55
Level 1
Posts: 16 Joined: Tue Apr 13, 2021 12:37 pm
Post
by achim55 » Tue Apr 20, 2021 5:52 am
Da ist DP-1 aus. Schalte ich ihn ein und starte neu, ist er wieder aus
Attachments
ehtron
Level 10
Posts: 3364 Joined: Thu Apr 14, 2016 8:15 am
Location: Germany / Baltic Sea
Contact:
Post
by ehtron » Tue Apr 20, 2021 5:59 am
Hi
also wenn du ihn einschaltest ist alles ok?
was sagt
damit kannst du auch die monitore schalten und einstellen.... wie gesagt.. x-config muss weg.
Lg. Ehtron :)
Keine Hilfe bei fehlender System / Desktop Angabe.
Ich gebe Hilfe zur Selbsthilfe.
achim55
Level 1
Posts: 16 Joined: Tue Apr 13, 2021 12:37 pm
Post
by achim55 » Tue Apr 20, 2021 6:04 am
Einschalten kann ich ihn aber es tut sich nichts. Starte ich Mint neu ist er wieder aus.
Code: Select all
Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 16384 x 16384
DVI-I-0 disconnected (normal left inverted right x axis y axis)
DVI-I-1 connected primary 1920x1080+1920+0 (normal left inverted right x axis y axis) 598mm x 336mm
1920x1080 60.00*+ 59.94 50.00 60.05 60.00 50.04
1680x1050 59.95
1600x900 60.00
1280x1024 75.02 60.02
1280x800 59.81
1280x720 60.00 59.94 50.00
1024x768 75.03 60.00
800x600 75.00 60.32
720x576 50.00
720x480 59.94
640x480 75.00 59.94 59.93
DP-0 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 598mm x 336mm
1920x1080 60.00*+ 59.94 50.00 60.05 60.00 50.04
1680x1050 59.95
1600x900 60.00
1280x1024 75.02 60.02
1280x800 59.81
1280x720 60.00 59.94 50.00
1024x768 75.03 60.00
800x600 75.00 60.32
720x576 50.00
720x480 59.94
640x480 75.00 59.94 59.93
DP-1 connected (normal left inverted right x axis y axis)
1920x1080 60.00 + 59.94 50.00 60.05 60.00 50.04
1680x1050 59.95
1600x900 60.00
1280x1024 75.02 60.02
1280x800 59.81
1280x720 60.00 59.94 50.00
1024x768 75.03 60.00
800x600 75.00 60.32
720x576 50.00
720x480 59.94
640x480 75.00 59.94 59.93
DP-2 disconnected (normal left inverted right x axis y axis)
DP-3 disconnected (normal left inverted right x axis y axis)
achim55
Level 1
Posts: 16 Joined: Tue Apr 13, 2021 12:37 pm
Post
by achim55 » Tue Apr 20, 2021 6:10 am
ich habe auch schon den xserver-xorg ausprobiert, ohne Erfolg
Attachments
Bildschirmfoto zu 2021-04-20 12-09-55.png (27.98 KiB) Viewed 667 times
ehtron
Level 10
Posts: 3364 Joined: Thu Apr 14, 2016 8:15 am
Location: Germany / Baltic Sea
Contact:
Post
by ehtron » Tue Apr 20, 2021 6:51 am
Hi
eigentlich sind alle drei connectet und sollten gehen..
Lg. Ehtron :)
Keine Hilfe bei fehlender System / Desktop Angabe.
Ich gebe Hilfe zur Selbsthilfe.
achim55
Level 1
Posts: 16 Joined: Tue Apr 13, 2021 12:37 pm
Post
by achim55 » Tue Apr 20, 2021 7:18 am
Da bekomme ich das
xrandr --output dp-1 --auto
warning: output dp-1 not found; ignoring
achim55
Level 1
Posts: 16 Joined: Tue Apr 13, 2021 12:37 pm
Post
by achim55 » Tue Apr 20, 2021 8:00 am
wenn ich DP-0 ausschalte funktioniert DP-1
ehtron
Level 10
Posts: 3364 Joined: Thu Apr 14, 2016 8:15 am
Location: Germany / Baltic Sea
Contact:
Post
by ehtron » Tue Apr 20, 2021 8:03 am
Hi
mein fehler... case senistiv
Lg. Ehtron :)
Keine Hilfe bei fehlender System / Desktop Angabe.
Ich gebe Hilfe zur Selbsthilfe.
achim55
Level 1
Posts: 16 Joined: Tue Apr 13, 2021 12:37 pm
Post
by achim55 » Tue Apr 20, 2021 9:30 am
Hätte ich auch drauf kommen können
Geht aber auch nicht.